mutter/src/backends/native/meta-kms-connector.c

610 lines
18 KiB
C
Raw Normal View History

/*
* Copyright (C) 2019 Red Hat
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
* 02111-1307, USA.
*/
#include "config.h"
#include "backends/native/meta-kms-connector.h"
#include "backends/native/meta-kms-connector-private.h"
#include <errno.h>
#include "backends/native/meta-kms-device-private.h"
#include "backends/native/meta-kms-impl-device.h"
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 16:36:41 -04:00
#include "backends/native/meta-kms-update-private.h"
struct _MetaKmsConnector
{
GObject parent;
MetaKmsDevice *device;
uint32_t id;
MetaConnectorType type;
char *name;
MetaKmsConnectorState *current_state;
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 16:36:41 -04:00
uint32_t dpms_prop_id;
uint32_t underscan_prop_id;
uint32_t underscan_hborder_prop_id;
uint32_t underscan_vborder_prop_id;
uint32_t edid_blob_id;
uint32_t tile_blob_id;
};
G_DEFINE_TYPE (MetaKmsConnector, meta_kms_connector, G_TYPE_OBJECT)
MetaKmsDevice *
meta_kms_connector_get_device (MetaKmsConnector *connector)
{
return connector->device;
}
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 16:36:41 -04:00
void
meta_kms_connector_update_set_dpms_state (MetaKmsConnector *connector,
MetaKmsUpdate *update,
uint64_t state)
{
meta_kms_update_set_connector_property (update,
connector,
connector->dpms_prop_id,
state);
}
void
meta_kms_connector_set_underscanning (MetaKmsConnector *connector,
MetaKmsUpdate *update,
uint64_t hborder,
uint64_t vborder)
{
meta_kms_update_set_connector_property (update,
connector,
connector->underscan_prop_id,
1);
meta_kms_update_set_connector_property (update,
connector,
connector->underscan_hborder_prop_id,
hborder);
meta_kms_update_set_connector_property (update,
connector,
connector->underscan_vborder_prop_id,
vborder);
}
void
meta_kms_connector_unset_underscanning (MetaKmsConnector *connector,
MetaKmsUpdate *update)
{
meta_kms_update_set_connector_property (update,
connector,
connector->underscan_prop_id,
0);
}
MetaConnectorType
meta_kms_connector_get_connector_type (MetaKmsConnector *connector)
{
return connector->type;
}
uint32_t
meta_kms_connector_get_id (MetaKmsConnector *connector)
{
return connector->id;
}
const char *
meta_kms_connector_get_name (MetaKmsConnector *connector)
{
return connector->name;
}
gboolean
meta_kms_connector_can_clone (MetaKmsConnector *connector,
MetaKmsConnector *other_connector)
{
MetaKmsConnectorState *state = connector->current_state;
MetaKmsConnectorState *other_state = other_connector->current_state;
if (state->common_possible_clones == 0 ||
other_state->common_possible_clones == 0)
return FALSE;
if (state->encoder_device_idxs != other_state->encoder_device_idxs)
return FALSE;
return TRUE;
}
const MetaKmsConnectorState *
meta_kms_connector_get_current_state (MetaKmsConnector *connector)
{
return connector->current_state;
}
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 16:36:41 -04:00
gboolean
meta_kms_connector_is_underscanning_supported (MetaKmsConnector *connector)
{
return connector->underscan_prop_id != 0;
}
static void
set_panel_orientation (MetaKmsConnectorState *state,
drmModePropertyPtr prop,
uint64_t orientation)
{
const char *name;
name = prop->enums[orientation].name;
if (strcmp (name, "Upside Down") == 0)
{
state->panel_orientation_transform = META_MONITOR_TRANSFORM_180;
}
else if (strcmp (name, "Left Side Up") == 0)
{
/* Left side up, rotate 90 degrees counter clockwise to correct */
state->panel_orientation_transform = META_MONITOR_TRANSFORM_90;
}
else if (strcmp (name, "Right Side Up") == 0)
{
/* Right side up, rotate 270 degrees counter clockwise to correct */
state->panel_orientation_transform = META_MONITOR_TRANSFORM_270;
}
else
{
state->panel_orientation_transform = META_MONITOR_TRANSFORM_NORMAL;
}
}
static void
state_set_properties (MetaKmsConnectorState *state,
MetaKmsImplDevice *impl_device,
drmModeConnector *drm_connector)
{
int fd;
int i;
fd = meta_kms_impl_device_get_fd (impl_device);
for (i = 0; i < drm_connector->count_props; i++)
{
drmModePropertyPtr prop;
prop = drmModeGetProperty (fd, drm_connector->props[i]);
if (!prop)
continue;
if ((prop->flags & DRM_MODE_PROP_RANGE) &&
strcmp (prop->name, "suggested X") == 0)
state->suggested_x = drm_connector->prop_values[i];
else if ((prop->flags & DRM_MODE_PROP_RANGE) &&
strcmp (prop->name, "suggested Y") == 0)
state->suggested_y = drm_connector->prop_values[i];
else if ((prop->flags & DRM_MODE_PROP_RANGE) &&
strcmp (prop->name, "hotplug_mode_update") == 0)
state->hotplug_mode_update = drm_connector->prop_values[i];
else if (strcmp (prop->name, "scaling mode") == 0)
state->has_scaling = TRUE;
else if ((prop->flags & DRM_MODE_PROP_ENUM) &&
strcmp (prop->name, "panel orientation") == 0)
set_panel_orientation (state, prop, drm_connector->prop_values[i]);
drmModeFreeProperty (prop);
}
}
static CoglSubpixelOrder
drm_subpixel_order_to_cogl_subpixel_order (drmModeSubPixel subpixel)
{
switch (subpixel)
{
case DRM_MODE_SUBPIXEL_NONE:
return COGL_SUBPIXEL_ORDER_NONE;
break;
case DRM_MODE_SUBPIXEL_HORIZONTAL_RGB:
return COGL_SUBPIXEL_ORDER_HORIZONTAL_RGB;
break;
case DRM_MODE_SUBPIXEL_HORIZONTAL_BGR:
return COGL_SUBPIXEL_ORDER_HORIZONTAL_BGR;
break;
case DRM_MODE_SUBPIXEL_VERTICAL_RGB:
return COGL_SUBPIXEL_ORDER_VERTICAL_RGB;
break;
case DRM_MODE_SUBPIXEL_VERTICAL_BGR:
return COGL_SUBPIXEL_ORDER_VERTICAL_BGR;
break;
case DRM_MODE_SUBPIXEL_UNKNOWN:
return COGL_SUBPIXEL_ORDER_UNKNOWN;
}
return COGL_SUBPIXEL_ORDER_UNKNOWN;
}
static void
state_set_edid (MetaKmsConnectorState *state,
MetaKmsConnector *connector,
MetaKmsImplDevice *impl_device,
uint32_t blob_id)
{
int fd;
drmModePropertyBlobPtr edid_blob;
GBytes *edid_data;
fd = meta_kms_impl_device_get_fd (impl_device);
edid_blob = drmModeGetPropertyBlob (fd, blob_id);
if (!edid_blob)
{
g_warning ("Failed to read EDID of connector %s: %s",
connector->name, g_strerror (errno));
return;
}
edid_data = g_bytes_new (edid_blob->data, edid_blob->length);
drmModeFreePropertyBlob (edid_blob);
state->edid_data = edid_data;
}
static void
state_set_tile_info (MetaKmsConnectorState *state,
MetaKmsConnector *connector,
MetaKmsImplDevice *impl_device,
uint32_t blob_id)
{
int fd;
drmModePropertyBlobPtr tile_blob;
state->tile_info = (MetaTileInfo) { 0 };
fd = meta_kms_impl_device_get_fd (impl_device);
tile_blob = drmModeGetPropertyBlob (fd, blob_id);
if (!tile_blob)
{
g_warning ("Failed to read TILE of connector %s: %s",
connector->name, strerror (errno));
return;
}
if (tile_blob->length > 0)
{
if (sscanf ((char *) tile_blob->data, "%d:%d:%d:%d:%d:%d:%d:%d",
&state->tile_info.group_id,
&state->tile_info.flags,
&state->tile_info.max_h_tiles,
&state->tile_info.max_v_tiles,
&state->tile_info.loc_h_tile,
&state->tile_info.loc_v_tile,
&state->tile_info.tile_w,
&state->tile_info.tile_h) != 8)
{
g_warning ("Couldn't understand TILE property blob of connector %s",
connector->name);
state->tile_info = (MetaTileInfo) { 0 };
}
}
drmModeFreePropertyBlob (tile_blob);
}
static void
state_set_blobs (MetaKmsConnectorState *state,
MetaKmsConnector *connector,
MetaKmsImplDevice *impl_device,
drmModeConnector *drm_connector)
{
int fd;
int i;
fd = meta_kms_impl_device_get_fd (impl_device);
for (i = 0; i < drm_connector->count_props; i++)
{
drmModePropertyPtr prop;
prop = drmModeGetProperty (fd, drm_connector->props[i]);
if (!prop)
continue;
if (prop->flags & DRM_MODE_PROP_BLOB)
{
uint32_t blob_id;
blob_id = drm_connector->prop_values[i];
if (blob_id)
{
if (strcmp (prop->name, "EDID") == 0)
state_set_edid (state, connector, impl_device, blob_id);
else if (strcmp (prop->name, "TILE") == 0)
state_set_tile_info (state, connector, impl_device, blob_id);
}
}
drmModeFreeProperty (prop);
}
}
static void
state_set_physical_dimensions (MetaKmsConnectorState *state,
drmModeConnector *drm_connector)
{
state->width_mm = drm_connector->mmWidth;
state->height_mm = drm_connector->mmHeight;
}
static void
state_set_modes (MetaKmsConnectorState *state,
drmModeConnector *drm_connector)
{
state->modes =
g_memdup (drm_connector->modes,
drm_connector->count_modes * sizeof (drmModeModeInfo));
state->n_modes = drm_connector->count_modes;
}
static void
set_encoder_device_idx_bit (uint32_t *encoder_device_idxs,
uint32_t encoder_id,
MetaKmsImplDevice *impl_device,
drmModeRes *drm_resources)
{
int fd;
int i;
fd = meta_kms_impl_device_get_fd (impl_device);
for (i = 0; i < drm_resources->count_encoders; i++)
{
drmModeEncoder *drm_encoder;
drm_encoder = drmModeGetEncoder (fd, drm_resources->encoders[i]);
if (!drm_encoder)
continue;
if (drm_encoder->encoder_id == encoder_id)
{
*encoder_device_idxs |= (1 << i);
break;
}
}
}
static void
state_set_crtc_state (MetaKmsConnectorState *state,
drmModeConnector *drm_connector,
MetaKmsImplDevice *impl_device,
drmModeRes *drm_resources)
{
int fd;
int i;
uint32_t common_possible_crtcs;
uint32_t common_possible_clones;
uint32_t encoder_device_idxs;
fd = meta_kms_impl_device_get_fd (impl_device);
common_possible_crtcs = UINT32_MAX;
common_possible_clones = UINT32_MAX;
encoder_device_idxs = 0;
for (i = 0; i < drm_connector->count_encoders; i++)
{
drmModeEncoder *drm_encoder;
drm_encoder = drmModeGetEncoder (fd, drm_connector->encoders[i]);
if (!drm_encoder)
continue;
common_possible_crtcs &= drm_encoder->possible_crtcs;
common_possible_clones &= drm_encoder->possible_clones;
set_encoder_device_idx_bit (&encoder_device_idxs,
drm_encoder->encoder_id,
impl_device,
drm_resources);
if (drm_connector->encoder_id == drm_encoder->encoder_id)
state->current_crtc_id = drm_encoder->crtc_id;
}
state->common_possible_crtcs = common_possible_crtcs;
state->common_possible_clones = common_possible_clones;
state->encoder_device_idxs = encoder_device_idxs;
}
static MetaKmsConnectorState *
meta_kms_connector_state_new (void)
{
MetaKmsConnectorState *state;
state = g_new0 (MetaKmsConnectorState, 1);
state->suggested_x = -1;
state->suggested_y = -1;
return state;
}
static void
meta_kms_connector_state_free (MetaKmsConnectorState *state)
{
g_clear_pointer (&state->edid_data, g_bytes_unref);
g_free (state->modes);
g_free (state);
}
static void
meta_kms_connector_read_state (MetaKmsConnector *connector,
MetaKmsImplDevice *impl_device,
drmModeConnector *drm_connector,
drmModeRes *drm_resources)
{
MetaKmsConnectorState *state;
g_clear_pointer (&connector->current_state, meta_kms_connector_state_free);
if (!drm_connector || drm_connector->connection != DRM_MODE_CONNECTED)
return;
state = meta_kms_connector_state_new ();
state_set_blobs (state, connector, impl_device, drm_connector);
state_set_properties (state, impl_device, drm_connector);
state->subpixel_order =
drm_subpixel_order_to_cogl_subpixel_order (drm_connector->subpixel);
state_set_physical_dimensions (state, drm_connector);
state_set_modes (state, drm_connector);
state_set_crtc_state (state, drm_connector, impl_device, drm_resources);
connector->current_state = state;
}
void
meta_kms_connector_update_state (MetaKmsConnector *connector,
drmModeRes *drm_resources)
{
MetaKmsImplDevice *impl_device;
drmModeConnector *drm_connector;
impl_device = meta_kms_device_get_impl_device (connector->device);
drm_connector = drmModeGetConnector (meta_kms_impl_device_get_fd (impl_device),
connector->id);
meta_kms_connector_read_state (connector, impl_device,
drm_connector,
drm_resources);
if (drm_connector)
drmModeFreeConnector (drm_connector);
}
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 16:36:41 -04:00
static void
find_property_ids (MetaKmsConnector *connector,
MetaKmsImplDevice *impl_device,
drmModeConnector *drm_connector)
{
int fd;
int i;
fd = meta_kms_impl_device_get_fd (impl_device);
for (i = 0; i < drm_connector->count_props; i++)
{
drmModePropertyPtr prop;
prop = drmModeGetProperty (fd, drm_connector->props[i]);
if (!prop)
continue;
if ((prop->flags & DRM_MODE_PROP_ENUM) &&
strcmp (prop->name, "DPMS") == 0)
connector->dpms_prop_id = prop->prop_id;
else if ((prop->flags & DRM_MODE_PROP_ENUM) &&
strcmp (prop->name, "underscan") == 0)
connector->underscan_prop_id = prop->prop_id;
else if ((prop->flags & DRM_MODE_PROP_RANGE) &&
strcmp (prop->name, "underscan hborder") == 0)
connector->underscan_hborder_prop_id = prop->prop_id;
else if ((prop->flags & DRM_MODE_PROP_RANGE) &&
strcmp (prop->name, "underscan vborder") == 0)
connector->underscan_vborder_prop_id = prop->prop_id;
drmModeFreeProperty (prop);
}
}
static char *
make_connector_name (drmModeConnector *drm_connector)
{
static const char * const connector_type_names[] = {
"None",
"VGA",
"DVI-I",
"DVI-D",
"DVI-A",
"Composite",
"SVIDEO",
"LVDS",
"Component",
"DIN",
"DP",
"HDMI",
"HDMI-B",
"TV",
"eDP",
"Virtual",
"DSI",
};
if (drm_connector->connector_type < G_N_ELEMENTS (connector_type_names))
return g_strdup_printf ("%s-%d",
connector_type_names[drm_connector->connector_type],
drm_connector->connector_type_id);
else
return g_strdup_printf ("Unknown%d-%d",
drm_connector->connector_type,
drm_connector->connector_type_id);
}
MetaKmsConnector *
meta_kms_connector_new (MetaKmsImplDevice *impl_device,
drmModeConnector *drm_connector,
drmModeRes *drm_resources)
{
MetaKmsConnector *connector;
connector = g_object_new (META_TYPE_KMS_CONNECTOR, NULL);
connector->device = meta_kms_impl_device_get_device (impl_device);
connector->id = drm_connector->connector_id;
connector->type = (MetaConnectorType) drm_connector->connector_type;
connector->name = make_connector_name (drm_connector);
backend/native: Add and use transactional KMS API This commit introduces, and makes use of, a transactional API used for setting up KMS state, later to be applied, potentially atomically. From an API point of view, so is always the case, but in the current implementation, it still uses legacy drmMode* API to apply the state non-atomically. The API consists of various buliding blocks: * MetaKmsUpdate - a set of configuration changes, the higher level handle for handing over configuration to the impl backend. It's used to set mode, assign framebuffers to planes, queue page flips and set connector properties. * MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane. Currently used to map a framebuffer to the primary plane of a CRTC. In the legacy KMS implementation, the plane assignment is used to derive the framebuffer used for mode setting and page flipping. This also means various high level changes: State, excluding configuring the cursor plane and creating/destroying DRM framebuffer handles, are applied in the end of a clutter frame, in one go. From an API point of view, this is done atomically, but as mentioned, only the non-atomic implementation exists so far. From MetaRendererNative's point of view, a page flip now initially always succeeds; the handling of EBUSY errors are done asynchronously in the MetaKmsImpl backend (still by retrying at refresh rate, but postponing flip callbacks instead of manipulating the frame clock). Handling of falling back to mode setting instead of page flipping is notified after the fact by a more precise page flip feedback API. EGLStream based page flipping relies on the impl backend not being atomic, as the page flipping is done in the EGLStream backend (e.g. nvidia driver). It uses a 'custom' page flip queueing method, keeping the EGLStream logic inside meta-renderer-native.c. Page flip handling is moved to meta-kms-impl-device.c from meta-gpu-kms.c. It goes via an extra idle callback before reaching meta-renderer-native.c to make sure callbacks are invoked outside of the impl context. While dummy power save page flipping is kept in meta-renderer-native.c, the EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the frame clock, actual page flip callbacks are postponed until all EBUSY retries have either succeeded or failed due to some other error than EBUSY. This effectively inhibits new frames to be drawn, meaning we won't stall waiting on the file descriptor for pending page flips. https://gitlab.gnome.org/GNOME/mutter/issues/548 https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
2019-04-04 16:36:41 -04:00
find_property_ids (connector, impl_device, drm_connector);
meta_kms_connector_read_state (connector, impl_device,
drm_connector,
drm_resources);
return connector;
}
static void
meta_kms_connector_finalize (GObject *object)
{
MetaKmsConnector *connector = META_KMS_CONNECTOR (object);
g_clear_pointer (&connector->current_state, meta_kms_connector_state_free);
g_free (connector->name);
G_OBJECT_CLASS (meta_kms_connector_parent_class)->finalize (object);
}
static void
meta_kms_connector_init (MetaKmsConnector *connector)
{
}
static void
meta_kms_connector_class_init (MetaKmsConnectorClass *klass)
{
GObjectClass *object_class = G_OBJECT_CLASS (klass);
object_class->finalize = meta_kms_connector_finalize;
}