mutter/src/org.gnome.Mutter.ScreenCast.xml

183 lines
5.1 KiB
XML
Raw Normal View History

Add remote desktop and screen cast functionality This commit adds basic screen casting and remote desktoping functionalty. This works by exposing two D-Bus API services: org.gnome.Mutter.ScreenCast and org.gnome.Mutter.RemoteDesktop. The remote desktop API is used to create remote desktop sessions. For each session, a D-Bus object is created, and an application can manage the session by sending messages to the session object. A remote desktop session the user to emit input events using the D-Bus methods on the session object. To get framebuffer content, the application should create an associated screen cast session. The screen cast API is used to create screen cast sessions. One can so far either create stand-alone screen cast sessions, or a screen cast session associated with a remote desktop session. A remote desktop associated screen cast session is managed by the remote desktop session. So far only remote desktop managed screen cast sessions are implemented. Each screen cast session may have one or more streams. A screen cast stream is a stream of buffers of some part of the compositor content. So far API exists for creating streams of monitors and windows, but only monitor streams are implemented. When a screen cast session is started, the one PipeWire stream is created for each screen cast stream created for the session. When this has happened, a PipeWireStreamAdded signal is emitted on the stream object, passing a unique identifier. The application may use this identifier to find the associated stream being advertised by the PipeWire daemon. The remote desktop and screen cast functionality must be explicitly be enabled at ./configure time by passing --enable-remote-desktop to ./configure. Doing this will build both screen cast and remote desktop support. To actually enable the screen casting and remote desktop, the user must enable the experimental feature. See org.gnome.mutter.experimental-features. https://bugzilla.gnome.org/show_bug.cgi?id=784199
2017-06-21 02:23:44 -04:00
<!DOCTYPE node PUBLIC
'-//freedesktop//DTD D-BUS Object Introspection 1.0//EN'
'http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd'>
<node>
<!--
org.gnome.Mutter.ScreenCast:
@short_description: Screen cast interface
This API is private and not intended to be used outside of the integrated
system that uses libmutter. No compatibility between versions are
promised.
Add remote desktop and screen cast functionality This commit adds basic screen casting and remote desktoping functionalty. This works by exposing two D-Bus API services: org.gnome.Mutter.ScreenCast and org.gnome.Mutter.RemoteDesktop. The remote desktop API is used to create remote desktop sessions. For each session, a D-Bus object is created, and an application can manage the session by sending messages to the session object. A remote desktop session the user to emit input events using the D-Bus methods on the session object. To get framebuffer content, the application should create an associated screen cast session. The screen cast API is used to create screen cast sessions. One can so far either create stand-alone screen cast sessions, or a screen cast session associated with a remote desktop session. A remote desktop associated screen cast session is managed by the remote desktop session. So far only remote desktop managed screen cast sessions are implemented. Each screen cast session may have one or more streams. A screen cast stream is a stream of buffers of some part of the compositor content. So far API exists for creating streams of monitors and windows, but only monitor streams are implemented. When a screen cast session is started, the one PipeWire stream is created for each screen cast stream created for the session. When this has happened, a PipeWireStreamAdded signal is emitted on the stream object, passing a unique identifier. The application may use this identifier to find the associated stream being advertised by the PipeWire daemon. The remote desktop and screen cast functionality must be explicitly be enabled at ./configure time by passing --enable-remote-desktop to ./configure. Doing this will build both screen cast and remote desktop support. To actually enable the screen casting and remote desktop, the user must enable the experimental feature. See org.gnome.mutter.experimental-features. https://bugzilla.gnome.org/show_bug.cgi?id=784199
2017-06-21 02:23:44 -04:00
-->
<interface name="org.gnome.Mutter.ScreenCast">
<!--
CreateSession:
@properties: Properties
@session_path: Path to the new session object
* "remote-desktop-session-id" (s): The ID of a remote desktop session.
Remote desktop driven screen casts
are started and stopped by the remote
desktop session.
* "disable-animations" (b): Set to "true" if the screen cast application
would prefer animations to be globally
disabled, while the session is running. Default
is "false". Available since version 3.
Add remote desktop and screen cast functionality This commit adds basic screen casting and remote desktoping functionalty. This works by exposing two D-Bus API services: org.gnome.Mutter.ScreenCast and org.gnome.Mutter.RemoteDesktop. The remote desktop API is used to create remote desktop sessions. For each session, a D-Bus object is created, and an application can manage the session by sending messages to the session object. A remote desktop session the user to emit input events using the D-Bus methods on the session object. To get framebuffer content, the application should create an associated screen cast session. The screen cast API is used to create screen cast sessions. One can so far either create stand-alone screen cast sessions, or a screen cast session associated with a remote desktop session. A remote desktop associated screen cast session is managed by the remote desktop session. So far only remote desktop managed screen cast sessions are implemented. Each screen cast session may have one or more streams. A screen cast stream is a stream of buffers of some part of the compositor content. So far API exists for creating streams of monitors and windows, but only monitor streams are implemented. When a screen cast session is started, the one PipeWire stream is created for each screen cast stream created for the session. When this has happened, a PipeWireStreamAdded signal is emitted on the stream object, passing a unique identifier. The application may use this identifier to find the associated stream being advertised by the PipeWire daemon. The remote desktop and screen cast functionality must be explicitly be enabled at ./configure time by passing --enable-remote-desktop to ./configure. Doing this will build both screen cast and remote desktop support. To actually enable the screen casting and remote desktop, the user must enable the experimental feature. See org.gnome.mutter.experimental-features. https://bugzilla.gnome.org/show_bug.cgi?id=784199
2017-06-21 02:23:44 -04:00
-->
<method name="CreateSession">
<arg name="properties" type="a{sv}" direction="in" />
<arg name="session_path" type="o" direction="out" />
</method>
<!--
Version:
@short_description: API version
-->
<property name="Version" type="i" access="read" />
Add remote desktop and screen cast functionality This commit adds basic screen casting and remote desktoping functionalty. This works by exposing two D-Bus API services: org.gnome.Mutter.ScreenCast and org.gnome.Mutter.RemoteDesktop. The remote desktop API is used to create remote desktop sessions. For each session, a D-Bus object is created, and an application can manage the session by sending messages to the session object. A remote desktop session the user to emit input events using the D-Bus methods on the session object. To get framebuffer content, the application should create an associated screen cast session. The screen cast API is used to create screen cast sessions. One can so far either create stand-alone screen cast sessions, or a screen cast session associated with a remote desktop session. A remote desktop associated screen cast session is managed by the remote desktop session. So far only remote desktop managed screen cast sessions are implemented. Each screen cast session may have one or more streams. A screen cast stream is a stream of buffers of some part of the compositor content. So far API exists for creating streams of monitors and windows, but only monitor streams are implemented. When a screen cast session is started, the one PipeWire stream is created for each screen cast stream created for the session. When this has happened, a PipeWireStreamAdded signal is emitted on the stream object, passing a unique identifier. The application may use this identifier to find the associated stream being advertised by the PipeWire daemon. The remote desktop and screen cast functionality must be explicitly be enabled at ./configure time by passing --enable-remote-desktop to ./configure. Doing this will build both screen cast and remote desktop support. To actually enable the screen casting and remote desktop, the user must enable the experimental feature. See org.gnome.mutter.experimental-features. https://bugzilla.gnome.org/show_bug.cgi?id=784199
2017-06-21 02:23:44 -04:00
</interface>
<!--
org.gnome.Mutter.ScreenCast.Session:
@short_description: Screen cast session
-->
<interface name="org.gnome.Mutter.ScreenCast.Session">
<!--
Start:
Start the screen cast session
-->
<method name="Start" />
<!--
Stop:
Stop the screen cast session
-->
<method name="Stop" />
<!--
Closed:
The session has closed.
-->
<signal name="Closed" />
<!--
RecordMonitor:
@connector: Connector of the monitor to record
@properties: Properties
@stream_path: Path to the new stream object
Record a single monitor.
Available @properties include:
* "cursor-mode" (u): Cursor mode. Default: 'hidden' (see below)
Available since API version 2.
Available cursor mode values:
0: hidden - cursor is not included in the stream
1: embedded - cursor is included in the framebuffer
2: metadata - cursor is included as metadata in the PipeWire stream
Add remote desktop and screen cast functionality This commit adds basic screen casting and remote desktoping functionalty. This works by exposing two D-Bus API services: org.gnome.Mutter.ScreenCast and org.gnome.Mutter.RemoteDesktop. The remote desktop API is used to create remote desktop sessions. For each session, a D-Bus object is created, and an application can manage the session by sending messages to the session object. A remote desktop session the user to emit input events using the D-Bus methods on the session object. To get framebuffer content, the application should create an associated screen cast session. The screen cast API is used to create screen cast sessions. One can so far either create stand-alone screen cast sessions, or a screen cast session associated with a remote desktop session. A remote desktop associated screen cast session is managed by the remote desktop session. So far only remote desktop managed screen cast sessions are implemented. Each screen cast session may have one or more streams. A screen cast stream is a stream of buffers of some part of the compositor content. So far API exists for creating streams of monitors and windows, but only monitor streams are implemented. When a screen cast session is started, the one PipeWire stream is created for each screen cast stream created for the session. When this has happened, a PipeWireStreamAdded signal is emitted on the stream object, passing a unique identifier. The application may use this identifier to find the associated stream being advertised by the PipeWire daemon. The remote desktop and screen cast functionality must be explicitly be enabled at ./configure time by passing --enable-remote-desktop to ./configure. Doing this will build both screen cast and remote desktop support. To actually enable the screen casting and remote desktop, the user must enable the experimental feature. See org.gnome.mutter.experimental-features. https://bugzilla.gnome.org/show_bug.cgi?id=784199
2017-06-21 02:23:44 -04:00
-->
<method name="RecordMonitor">
<arg name="connector" type="s" direction="in" />
<arg name="properties" type="a{sv}" direction="in" />
<arg name="stream_path" type="o" direction="out" />
</method>
<!--
RecordWindow:
@properties: Properties used determining what window to select
@stream_path: Path to the new stream object
Supported since API version 2.
Record a single window. The cursor will not be included.
Add remote desktop and screen cast functionality This commit adds basic screen casting and remote desktoping functionalty. This works by exposing two D-Bus API services: org.gnome.Mutter.ScreenCast and org.gnome.Mutter.RemoteDesktop. The remote desktop API is used to create remote desktop sessions. For each session, a D-Bus object is created, and an application can manage the session by sending messages to the session object. A remote desktop session the user to emit input events using the D-Bus methods on the session object. To get framebuffer content, the application should create an associated screen cast session. The screen cast API is used to create screen cast sessions. One can so far either create stand-alone screen cast sessions, or a screen cast session associated with a remote desktop session. A remote desktop associated screen cast session is managed by the remote desktop session. So far only remote desktop managed screen cast sessions are implemented. Each screen cast session may have one or more streams. A screen cast stream is a stream of buffers of some part of the compositor content. So far API exists for creating streams of monitors and windows, but only monitor streams are implemented. When a screen cast session is started, the one PipeWire stream is created for each screen cast stream created for the session. When this has happened, a PipeWireStreamAdded signal is emitted on the stream object, passing a unique identifier. The application may use this identifier to find the associated stream being advertised by the PipeWire daemon. The remote desktop and screen cast functionality must be explicitly be enabled at ./configure time by passing --enable-remote-desktop to ./configure. Doing this will build both screen cast and remote desktop support. To actually enable the screen casting and remote desktop, the user must enable the experimental feature. See org.gnome.mutter.experimental-features. https://bugzilla.gnome.org/show_bug.cgi?id=784199
2017-06-21 02:23:44 -04:00
Available @properties include:
* "window-id" (t): Id of the window to record.
* "cursor-mode" (u): Cursor mode. Default: 'hidden' (see RecordMonitor).
Add remote desktop and screen cast functionality This commit adds basic screen casting and remote desktoping functionalty. This works by exposing two D-Bus API services: org.gnome.Mutter.ScreenCast and org.gnome.Mutter.RemoteDesktop. The remote desktop API is used to create remote desktop sessions. For each session, a D-Bus object is created, and an application can manage the session by sending messages to the session object. A remote desktop session the user to emit input events using the D-Bus methods on the session object. To get framebuffer content, the application should create an associated screen cast session. The screen cast API is used to create screen cast sessions. One can so far either create stand-alone screen cast sessions, or a screen cast session associated with a remote desktop session. A remote desktop associated screen cast session is managed by the remote desktop session. So far only remote desktop managed screen cast sessions are implemented. Each screen cast session may have one or more streams. A screen cast stream is a stream of buffers of some part of the compositor content. So far API exists for creating streams of monitors and windows, but only monitor streams are implemented. When a screen cast session is started, the one PipeWire stream is created for each screen cast stream created for the session. When this has happened, a PipeWireStreamAdded signal is emitted on the stream object, passing a unique identifier. The application may use this identifier to find the associated stream being advertised by the PipeWire daemon. The remote desktop and screen cast functionality must be explicitly be enabled at ./configure time by passing --enable-remote-desktop to ./configure. Doing this will build both screen cast and remote desktop support. To actually enable the screen casting and remote desktop, the user must enable the experimental feature. See org.gnome.mutter.experimental-features. https://bugzilla.gnome.org/show_bug.cgi?id=784199
2017-06-21 02:23:44 -04:00
-->
<method name="RecordWindow">
<arg name="properties" type="a{sv}" direction="in" />
<arg name="stream_path" type="o" direction="out" />
</method>
<!--
RecordArea:
@x: X position of the recorded area
@y: Y position of the recorded area
@width: width of the recorded area
@height: height of the recorded area
@properties: Properties
@stream_path: Path to the new stream object
Record an area of the stage. The coordinates are in stage coordinates.
The size of the stream does not necessarily match the size of the
recorded area, and will depend on DPI scale of the affected monitors.
Available @properties include:
* "cursor-mode" (u): Cursor mode. Default: 'hidden' (see below)
Available since API version 2.
Available cursor mode values:
0: hidden - cursor is not included in the stream
1: embedded - cursor is included in the framebuffer
2: metadata - cursor is included as metadata in the PipeWire stream
-->
<method name="RecordArea">
<arg name="x" type="i" direction="in" />
<arg name="y" type="i" direction="in" />
<arg name="width" type="i" direction="in" />
<arg name="height" type="i" direction="in" />
<arg name="properties" type="a{sv}" direction="in" />
<arg name="stream_path" type="o" direction="out" />
Add remote desktop and screen cast functionality This commit adds basic screen casting and remote desktoping functionalty. This works by exposing two D-Bus API services: org.gnome.Mutter.ScreenCast and org.gnome.Mutter.RemoteDesktop. The remote desktop API is used to create remote desktop sessions. For each session, a D-Bus object is created, and an application can manage the session by sending messages to the session object. A remote desktop session the user to emit input events using the D-Bus methods on the session object. To get framebuffer content, the application should create an associated screen cast session. The screen cast API is used to create screen cast sessions. One can so far either create stand-alone screen cast sessions, or a screen cast session associated with a remote desktop session. A remote desktop associated screen cast session is managed by the remote desktop session. So far only remote desktop managed screen cast sessions are implemented. Each screen cast session may have one or more streams. A screen cast stream is a stream of buffers of some part of the compositor content. So far API exists for creating streams of monitors and windows, but only monitor streams are implemented. When a screen cast session is started, the one PipeWire stream is created for each screen cast stream created for the session. When this has happened, a PipeWireStreamAdded signal is emitted on the stream object, passing a unique identifier. The application may use this identifier to find the associated stream being advertised by the PipeWire daemon. The remote desktop and screen cast functionality must be explicitly be enabled at ./configure time by passing --enable-remote-desktop to ./configure. Doing this will build both screen cast and remote desktop support. To actually enable the screen casting and remote desktop, the user must enable the experimental feature. See org.gnome.mutter.experimental-features. https://bugzilla.gnome.org/show_bug.cgi?id=784199
2017-06-21 02:23:44 -04:00
</method>
</interface>
<!--
org.gnome.Mutter.ScreenCast.Stream:
@short_description: Screen cast stream
-->
<interface name="org.gnome.Mutter.ScreenCast.Stream">
<!--
PipeWireStreamAdded:
@short_description: Pipewire stream added
A signal emitted when PipeWire stream for the screen cast stream has
been created. The @node_id corresponds to the PipeWire stream node.
-->
<signal name="PipeWireStreamAdded">
<annotation name="org.gtk.GDBus.C.Name" value="pipewire-stream-added"/>
<arg name="node_id" type="u" direction="out" />
Add remote desktop and screen cast functionality This commit adds basic screen casting and remote desktoping functionalty. This works by exposing two D-Bus API services: org.gnome.Mutter.ScreenCast and org.gnome.Mutter.RemoteDesktop. The remote desktop API is used to create remote desktop sessions. For each session, a D-Bus object is created, and an application can manage the session by sending messages to the session object. A remote desktop session the user to emit input events using the D-Bus methods on the session object. To get framebuffer content, the application should create an associated screen cast session. The screen cast API is used to create screen cast sessions. One can so far either create stand-alone screen cast sessions, or a screen cast session associated with a remote desktop session. A remote desktop associated screen cast session is managed by the remote desktop session. So far only remote desktop managed screen cast sessions are implemented. Each screen cast session may have one or more streams. A screen cast stream is a stream of buffers of some part of the compositor content. So far API exists for creating streams of monitors and windows, but only monitor streams are implemented. When a screen cast session is started, the one PipeWire stream is created for each screen cast stream created for the session. When this has happened, a PipeWireStreamAdded signal is emitted on the stream object, passing a unique identifier. The application may use this identifier to find the associated stream being advertised by the PipeWire daemon. The remote desktop and screen cast functionality must be explicitly be enabled at ./configure time by passing --enable-remote-desktop to ./configure. Doing this will build both screen cast and remote desktop support. To actually enable the screen casting and remote desktop, the user must enable the experimental feature. See org.gnome.mutter.experimental-features. https://bugzilla.gnome.org/show_bug.cgi?id=784199
2017-06-21 02:23:44 -04:00
</signal>
<!--
Parameters:
@short_description: Optional stream parameters
Available parameters include:
* "position" (ii): Position of the source of the stream in the
compositor coordinate space.
* "size" (ii): Size of the source of the stream in the compositor
coordinate space.
-->
<property name="Parameters" type="a{sv}" access="read" />
Add remote desktop and screen cast functionality This commit adds basic screen casting and remote desktoping functionalty. This works by exposing two D-Bus API services: org.gnome.Mutter.ScreenCast and org.gnome.Mutter.RemoteDesktop. The remote desktop API is used to create remote desktop sessions. For each session, a D-Bus object is created, and an application can manage the session by sending messages to the session object. A remote desktop session the user to emit input events using the D-Bus methods on the session object. To get framebuffer content, the application should create an associated screen cast session. The screen cast API is used to create screen cast sessions. One can so far either create stand-alone screen cast sessions, or a screen cast session associated with a remote desktop session. A remote desktop associated screen cast session is managed by the remote desktop session. So far only remote desktop managed screen cast sessions are implemented. Each screen cast session may have one or more streams. A screen cast stream is a stream of buffers of some part of the compositor content. So far API exists for creating streams of monitors and windows, but only monitor streams are implemented. When a screen cast session is started, the one PipeWire stream is created for each screen cast stream created for the session. When this has happened, a PipeWireStreamAdded signal is emitted on the stream object, passing a unique identifier. The application may use this identifier to find the associated stream being advertised by the PipeWire daemon. The remote desktop and screen cast functionality must be explicitly be enabled at ./configure time by passing --enable-remote-desktop to ./configure. Doing this will build both screen cast and remote desktop support. To actually enable the screen casting and remote desktop, the user must enable the experimental feature. See org.gnome.mutter.experimental-features. https://bugzilla.gnome.org/show_bug.cgi?id=784199
2017-06-21 02:23:44 -04:00
</interface>
</node>