Any symbols (including class properties) that should be visible
outside the module it's defined in need to be defined as global.
For now gjs still allows the access for 'const', but get rid of
the warnings spill now by changing it.
https://bugzilla.gnome.org/show_bug.cgi?id=785084
Both the Overview::scroll-event and actions added via addAction()
are meant to work anywhere in the overview, but for now only work
on the primary monitor. Move the handling to the background group
that is known to span all outputs to fix.
https://bugzilla.gnome.org/show_bug.cgi?id=766883
The message tray is now empty and about to be removed, so an indication
at the bottom edge of the overview becomes an odd location to convey the
status of the summary. We will eventually display an indication in the
top bar that unseen messages are available, for now just remove the
existing indicator.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
Tray icons make for a terrible UI on their own, but trying to
shoehorn them into the notification system has only made them
worse. At least for the time being this removal is temporary
and support for tray icons will be back, but no longer as part
of the notification system.
https://bugzilla.gnome.org/show_bug.cgi?id=744815
Commit a4475465f1 fixed the wrong alignment for the fully visible
control, but regressed the partially slid-out one; take the slideX
factor into account to get the right offset for both cases.
Controls that slide left are located on the left, so the offset to
align them with the corresponding edge is always 0. It's controls
on the right that need a different offset when the available width
exceeds the child's width.
https://bugzilla.gnome.org/show_bug.cgi?id=728899
Commit 12845f0eef reset translationX to 0 to fix the slide-in
animation of the dash when dragging a search result, but 0 is the
wrong value for the thumbnail slider - the next time it will be
shown, it will just pop up instead of sliding in due to translationX
already being at its target value.
Fix this by making _updateTranslation take the actual visibility into
account and call that to set the correct translation in dragBegin.
Controls are slided in by animating translationX from the actor's
width to 0; however as _updateTranslation() will skip the animation
when the property is already at its target value and 0 happens to be
the initial value of translationX, the initial animation is skipped.
Fix this by initializing translationX to undefined, which will always
differ from a valid target value.
The comment is right, updating the translation should be deferred
to pageEmpty, or else overview controls will just pop up instead
of sliding in. So revert that part of commit 6a7fa52879.
Currently we are overriding the explicit calls to slideIn
given that it's called also with the signal of showing overview.
It was necessary because of the bug that previous patch fixed,
so now we can just delete that.
https://bugzilla.gnome.org/show_bug.cgi?id=732901
The workspace switcher should be expanded when workspaces are in use.
Our current implementation assumes that workspaces are used when there
are windows on at least two workspaces. However workspaces are already
used when moving from a non-empty workspace to an empty one (presumably
with the intention to launch something on that workspace), so tweak the
heuristic accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=662457
As far as I can tell, the only behavior change of a transient source
is that they auto-destroy after viewing their summary box pointer.
Since all transient sources are only associated with transient
notifications, it seems that we can never get to their summary box
pointer in the first place! Remove support for this.
https://bugzilla.gnome.org/show_bug.cgi?id=710115
`a + b ? c : d` is parsed as `(a + b) ? c : d`, not the more intuitive
`a + (b ? c : d)`.
This was causing a bad slide animation and Clutter warnings when coming
out of the overview.
Not because ClutterActor is bad or wrong, but because I always get
confused on the difference, and having them both in SlideLayout
makes the code a bit easier to read and understand.
The parent SlidingControl had an onOverviewShowing, but we had
overridden it with the same code in both subclasses. Just move it
back to SlidingControl.
In order for the workspace thumbnails box to have the correct size,
we need to constrain the width of the thumbnails box to the height we're
given, instead of assuming an unlimited height.
https://bugzilla.gnome.org/show_bug.cgi?id=694881
This reverts commit e31693bbee.
This doesn't properly adjust the allocation, leading to an unbalanced
overview where things aren't centered properly. Just revert for now,
and we'll rethink this next cycle.
When coming back from search or apps, the workspace thumbnails and dash
don't slide in but "pop in". This is because of bad timing: when slideIn
is called, we immediately start the translation animation, and it
completes before by the time we fade the new page in.
Fix this by calling slideIn and slideOut at two different times: we now
slide out when the old page with our controls is fading out, and slide in
when the new page with our controls is fading in.
https://bugzilla.gnome.org/show_bug.cgi?id=708340
We currently update workspaces geometry when we are notified about
allocation changes of the overview group; however as the geometry
is based on stage coordinates, we miss notifications when the
allocation relative to the parent is unchanged, which happens when
the primary monitor's position changes but not its resolution.
Use a custom layout manager to give us a signal that is emitted
reliably.
https://bugzilla.gnome.org/show_bug.cgi?id=708009
The main overview actor was made reactive to catch scroll-events
and propagate them; after some code shuffling, the actor that
catches scroll events ended up not being the same actor that's
supposed to propagate this, which broke using the scroll wheel
to switch workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=700595
As we want to eventually track two geometries, we need to rename
our very plain "_x, _y, _width, _height". While we could just prefix
them, I think that stuffing them in an object makes more sense.
At the same time, make the variable and method name more descriptive
by adding such a prefix, as well as a bit of documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
To ensure that we don't recalculate window layouts when zooming
in or out, we need to always pass the full geometry. This will
break window repositioning when we zoom back in; for the purposes
of commit clarity, this breaks this feature for now. It will be
added back soon.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
Instead of creating a bunch of random actors and then passing
them off to the controls manager, let the controls manager
construct them. This leaves the controls manager in charge
of the ordeal.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
We always leave the workspace switcher zoomed out when we can assume
that the user is actually making use of workspaces. For the default
dynamic workspace behavior, we make this assumption when more than
two workspaces are in use (e.g. at least two workspaces contain windows
plus an empty one at the end). However this test does not make sense
when using static workspaces - in that case, not using workspaces
would be indicated by a workspace number of 1 (in which case the
entire switcher is hidden completely), so add a check for dynamic
workspaces to the condition.
https://bugzilla.gnome.org/show_bug.cgi?id=695126
We generally want view content centered, in particular where the
view itself is symmetrical. So move the dash to a separate layer
and use a placeholder to account for its size when showing the
window picker, which is the only view where it doesn't make sense
to center the content.
https://bugzilla.gnome.org/show_bug.cgi?id=694261
All the complexity with a custom actor and a generic container was
just to add some padding below the overview controls. Remove that,
and use CSS instead.
https://bugzilla.gnome.org/show_bug.cgi?id=694100
If the animation time is not the same for these two, the translation
will be adjusted to the allocation during the tween, resulting in a jump
in the animation.
https://bugzilla.gnome.org/show_bug.cgi?id=694035
Account for the search entry space at the bottom (the former message
tray clone) individually in each side control, instead of packing
another actor in the overview.
This allows us to extend the central view all the way to the bottom,
while still keeping controls centered vertically.
https://bugzilla.gnome.org/show_bug.cgi?id=693987
And use it in overviewControls. When we moved this code from overview.js
to overviewControls.js we lost a condition so we now slide in controls
even when going back from the overview, which looks bad.
https://bugzilla.gnome.org/show_bug.cgi?id=693974
The slideX property controls the allocation of the view selector; since
we now know when there are no visible views from the page-empty signal,
we can use it to set the full slideX for the next page at that time,
allowing the new view to fade in with the right width.
This allows us to use simple x translations for the side components when
switching pages, keeping the noise due to resizes at the minimum.
The slideX resize for now is kept for DnD, and will always be needed for
the thumbnails box when showing the windows page.
https://bugzilla.gnome.org/show_bug.cgi?id=693924
SlideLayout is a fixed layout that takes care of requesting and
allocating the right sizes so its contents can slide horizontally as the
actor is resized.
Sliding is controlled with a slideX and slideDirection properties, which
do the right thing wrt. RTL automatically.
Also add a SlidingControl base class that will be used by the overview
to pack and slide the workspace thumbnail switcher and the dash.
https://bugzilla.gnome.org/show_bug.cgi?id=682050
