The dynamic-workspaces key was introduced to allow us to opt out of
writing the num-workspaces setting (which is ignored with the dynamic
workspace management anyway), but there'll be some expectations that
the setting will have an effect on the UI.
It's actually not very hard to support, so here's to the graybeards ...
https://bugzilla.gnome.org/show_bug.cgi?id=671568
With the recent keynav changes, the keyboard focus can now move
away from the search entry while a search is active. While we
keep the focus entry style while a search is active, we set the
cursor visibility depending on whether the entry has focus. This
doesn't seem very logical, so always request to show the cursor
when we appear focused.
Note that at least for now we are just expressing intent, as clutter
never draws the cursor for unfocused entries.
When canceling a search pressing Escape while the focus is on the
search entry we clear the entry, set its text to the hint and go back
to the previously selected tab. Make this the behavior also for when
the focus is on search results and not on the entry itself.
https://bugzilla.gnome.org/show_bug.cgi?id=663901
Running apps are always kept in the dash, so removing them from
favorites just moves them to the end of the favorites list. This
behavior is not immediately obvious, so only show the remove target
when dragging a favorites application that is not currently running.
https://bugzilla.gnome.org/show_bug.cgi?id=644853
Saving the status to GSettings is pointless if it did not actually
change. If done during login, it is actually harmful, as it causes
dconf-service to be started.
https://bugzilla.gnome.org/show_bug.cgi?id=668214
When restoring the previous sesssion presence, we forcefully set
gnome-session's status. In the case of IDLE, this will trigger the
screensaver, which is clearly unwanted first thing after login. We
should only save and restore statuses that are explicitly set by the
user anyway, so limit presence saving to AVAILABLE and BUSY statuses.
https://bugzilla.gnome.org/show_bug.cgi?id=665701
Previously, PanelMenuButton would only set max width if the user
explicitly clicked the menu button, resulting in submenus without scrollbars
if opened via keyboard navigation or mouse over.
https://bugzilla.gnome.org/show_bug.cgi?id=658946
loadExtension() fails if the extension object is already created,
but the installation dialog was creating a dummy object in the
downloading state. Since nothing requires that (and the object is
not in the correct format anyway), just kill it.
https://bugzilla.gnome.org/show_bug.cgi?id=671134
This hack was part of the custom scroll view code that allowed for
proper scrolling when the actor was near the screen edges. Since
the port to St.ScrollView, it's unnecessary and downright wrong,
causing portions of actors to be clipped. Remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=613194
If a widget isn't focusable or none of its children are focusable, then
navigate_focus will return false and the key focus won't be set. We
need to explicitly grab the key focus in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=671001
* Add a keyring prompter based on GcrSystemPrompter
* Adds dependency on gcr version 3.3.5 or higher
* Not yet using unmerged support for non-pageable memory
https://bugzilla.gnome.org/show_bug.cgi?id=652459
The preferred way to unmaximize/untile a window is by using a drag
gesture. Extend the available area to start this gesture into
non-reactive parts of the top bar above the window - with that we
take advantage of the "infinite height" of the screen edge, and the
extra space is particularly useful when the window has its titlebar
hidden.
https://bugzilla.gnome.org/show_bug.cgi?id=666359
We were supposed to be updating the notification's title when the
window title changes, but we didn't actually bother to re-format
the title and body, effectively leaving the notification unchanged.
For modal dialogs without buttons, the button group still contributes
padding/spacing. To fix that, hide it by default and only show it
when actually adding buttons.
https://bugzilla.gnome.org/show_bug.cgi?id=668209
The appSwitcher has been using a custom scrolling implementation because
St.ScrollView was buggy when it was written. The bugs have been fixed
so remove the custom implementation and move to St.ScrollView.
https://bugzilla.gnome.org/show_bug.cgi?id=613194
The old formula worked only when the primary monitor was positioned at the
top of the virtual desktop. When that was not the case, the available
space was miscalculated sometimes resulting in negative numbers, which in
the end produced strangely vertically stretched window thumbnails.
https://bugzilla.gnome.org/show_bug.cgi?id=651130
Although not all "Finding and reminding" applications are ready
yet, the integration with gnome-documents' search results overlaps
enough with the "Recent Items" provider to justify its removal.
https://bugzilla.gnome.org/show_bug.cgi?id=670150
Allow applications to register search providers by dropping a keyfile
into a well-known directory. For now, initialize all found providers;
long term, we probably want to give users the ability to restrict the
set of active search providers.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
Add an asynchronous search provider for results from a DBus service
implementing the org.gnome.Shell.SearchProvider interface; this
will allow applications to hook into the Shell's search without
implementing it in Shell itself or requiring an extension.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
We will allow applications to hook into shell's search by registering
a service which implements a well-known DBus interface.
"search-providers" is a reasonable directory name for applications to
drop their registration files, but it conflicts with "search_providers"
used by open search providers - rename the latter to avoid confusion.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
Currently, asynchronous search providers are expected to call
startAsync() in getInitialResultSet()/getSubsearchResultSet(),
which will trigger async mode until the search is canceled or
updated. Switching between synchronous and asynchronous mode like
this makes asynchronous search an implementation detail, but being
transparent to the searchDisplay means that certain optimizations
don't work as expected. Namely, updating asynchronous search results
causes flickering, and the automatic selection never focuses
asynchronous results.
So change the API to require providers being either synchronous (with
the current getInitialResultSet()/getSubsearchResultSet() methods)
or asynchronous (with asynchronous variants), and handle asynchronous
providers explicitly in searchDisplay.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
renderResults() updates the results set, determines the number of
results to display, retrieves the corresponding result metas and
adds a new results actor for each meta.
Splitting the function in those parts allows to move the retrieval
of the result metas into SearchResults, which is where we ensure
flicker-free rendering and control the selection - we want to keep
both features for asynchronous result metas which we are about to
introduce.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
Empathy uses to support 2 D-Bus API for calls:
- StreamedMedia: legacy API
- Call.DRAFT: experimental version of the new API
Since 3.3.90, Empathy only supports Call1, the first stable version of the new
API, so the Shell should do the same.
https://bugzilla.gnome.org/show_bug.cgi?id=667694
Add a new dbus method that takes an area (x, y, width, height) and fires a
flashspot on it.
This would be useful for applications like totem and cheese.
https://bugzilla.gnome.org/show_bug.cgi?id=669660
An actor is removed from its parent after it emits the destroy signal,
so we can't just check if the notification stack has more than one
notification -- we need to check if there's a notification there
that is not the current one.
This was causing spew in the form of:
"this.notificationStack.get_children()[0]._delegate.setIconVisible
is not a function"
IconGrid items used to be square, so a single size value made
perfect sense. However, as contact search uses rectangular items,
using a single size is wrong - the allocated height ends up twice
the size of the visible height, which is particularly visible if
another provider displays results below contact results.
https://bugzilla.gnome.org/show_bug.cgi?id=670148
The correct way to make an actor having the same size as another is
a ClutterBindConstraint. Connecting to 'allocation-changed' fails because
the allocation might not change even when 'width' and 'height' properties do.
This is the case of Main.uiGroup, used as parent container for zoomed
window clones.
In lightbox.js we bind also the position because in principle it could change,
even if currently only fullscreen lightboxes are used.
VPN secrets are stored by the plugins, that provide separate
helpers for authentication. This commit adds the support for invoking
the binaries and pass them connection details.
For plugins that support it (as exposed by their keyfile), we invoke
them in "external-ui-mode" and expect a set of metadata about the
secrets which is used to build a shell styled dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=658484
ConsoleKit is being obsoleted by systemd. Accordingly port the CK logic
in the gnome-shell automount manager to systemd-logind APIs.
This makes use of systemd-logind's native C APIs which are much easier
to use than the D-Bus APIs in this case, and much faster too (since they
are synchronous and directly query the kernel for the information we
need). The dependency is compile time optional, and in order to be nice
to the Debian folks g-s compiled with this enabled fill automatically
fall back to CK support on systems lacking systemd.
Currently they return 'undefined' instead of something meaningful,
e.g. DND.DragMotionResult.CONTINUE. This was unnoticed because none
of the ancestors of the Activities button actors do any drag handling.
The only visible issue are JS errors generated when dragging, for example,
a window thumbnail over the button, because the cursor cannot be set.
https://bugzilla.gnome.org/show_bug.cgi?id=669921
Since the dummy actor occupies exactly the same area of the Hot Corner,
it can be erroneously picked during xdnd operations. Fix this by
hiding it from pick.
https://bugzilla.gnome.org/show_bug.cgi?id=669831
If both spacing and -shell-grid-item-size are 0, as they would be with nothing
setting them, we enter an infinite loop where we try to compute the layout.
Avoid the situation entirely by defaulting -shell-grid-item-size to a sane
value instead of 0.
https://bugzilla.gnome.org/show_bug.cgi?id=662747
The "extension" object is what I previously called the "helper" object.
It contains the extension importer object as well as the metadata object.
Things that were previously added on to the metadata (state, path, dir, etc.)
are now part of this new "extension" object.
With the new importer changes brought on by the extension prefs tool,
extensions are left without a way to import submodules at the global scope,
which would make them rely on techniques like:
var MySubModule;
function init(meta) {
MySubModule = meta.importer.mySubModule;
}
That is, there's now a lot more meaningless boilerplate that nobody wants
to write and nobody wants to reivew.
Let's solve this with a few clever hacks.
Allow extensions to get their current extension object with:
let extension = imports.misc.extensionUtils.getCurrentExtension();
As such, extensions can now get their own extension object before the
'init' method is called, so they can import submodules or do other things
at the module scope:
const MySubModule = extension.imports.mySubModule;
const dataPath = GLib.build_filenamev([extension.path, 'awesome-data.json']);
https://bugzilla.gnome.org/show_bug.cgi?id=668429
Add two new APIs, "launchExtensionPrefs" to let SweetTooth let the user
launch the extension preferences tool directly from the browser. To allow
SweetTooth to check if an extension can be configured, add a new key to
the 'metadata', 'hasPrefs', which is returned by the GetExtensionInfo/
ListExtensions DBus methods.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
ExtensionUtils is a new module that has a lot of miscellaneous things related
to loading extensions and the extension system put into a place that does not
depend on Shell or St.
Note that this will break extensions that have with multiple files by replacing
the old uuid-based importer with an object directly on the meta object.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
If an extension fails to import, we will pass the error object
to logExtensionError, which fails to pass it onto DBus as an
error object is not a string. To fix, convert the error object
to a string before passing it to logExtensionError.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
When the session status changes to IDLE, we automatically adjust
the IM presence; however, we should treat HIDDEN the same as OFFLINE
and not change the presence.
https://bugzilla.gnome.org/show_bug.cgi?id=642408
Since the port to GDBus, sessionActive is only set on DBus name
owner changes; this means that it may end up not being initialized
at all, and therefore always evaluate to false.
Make sure that the property is always initialized on startup.
https://bugzilla.gnome.org/show_bug.cgi?id=668020
gnome-settings-daemon commit 07b1ed63016 removed the custom 'Changed'
DBus signal in favor of the standard 'PropertiesChanged' signal, so
use that instead to update the icon.
https://bugzilla.gnome.org/show_bug.cgi?id=667371
When the last window on a workspace is closed the focus goes to some other
window in another workspace which would cause us to show the AppMenuButton for
an application that isn't visible on the current empty workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=643867
Currently it is not possible to trigger the context menu while the
summary notification is opened (and vice versa). To actually trigger
the desired item, the user has to click again, which is annoying
without a good justification, so allow switching directly between
left/right click items.
https://bugzilla.gnome.org/show_bug.cgi?id=666197
Currently we display IM status information for every contact, falling
back to "offline" if the contact does not have an associated IM
account. Instead, don't show IM presence in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=662685
this.parent was ported from calling the parent class's method like
MessageTray.Notification.prototype._init.call(this, ...);. When
porting to Lang.Class, the 'this' parameter is now passed automatically, but
removing it was forgot in a few places. Fix these places.
https://bugzilla.gnome.org/show_bug.cgi?id=665017
We consider spacing and padding in _adjustIconSize, but as we use
the theme node from an actor which is not exposed to the CSS, we
miss the "real" values - correct this.
https://bugzilla.gnome.org/show_bug.cgi?id=662213
Clear the ClutterClickAction state before starting the drag,
otherwise it will eat the first button event after the drag,
preventing a new drag from being started.
https://bugzilla.gnome.org/show_bug.cgi?id=662386
Writting the screenshot to a file can take a relativly long time
in which we block the compositor, so do that part in a separate
thread to avoid the hang.
https://bugzilla.gnome.org/show_bug.cgi?id=652952
DashItem labels have initial delay before showing up, but once the
first label in the dash is visible (meaning the user is very likely
exploring things) and the pointer is moved along the dash, the label
will follow immediately.
https://bugzilla.gnome.org/show_bug.cgi?id=666170
Signed-off-by: Seif Lotfy <seif.lotfy@collabora.co.uk>
- We should only call workspaceRemoved() for workspaces that are
are actually being removed.
- When we have multiple monitors, a window on a secondary monitor is
on all workspaces, so it ends up in all workspaces _allWindows
lists, so we can't use previous presence in that list to determine
whether we need to go ahead and add the actor; allWindows is simply
the list of windows where we are listening to notify::minimized.
https://bugzilla.gnome.org/show_bug.cgi?id=667652
Since the application proxy is created asynchronously, at the time
the GActionGroup (GActionMuxer) is created, there is no GDBusMenu yet.
Defer creating the menu in that case.
Also, clear out signal handlers if have no target application.
https://bugzilla.gnome.org/show_bug.cgi?id=633028
We add a drag monitor to check whether the pointer is inside
the workspace selector, and update the visibility of the drop
placeholder consequently.
https://bugzilla.gnome.org/show_bug.cgi?id=664201
According to the GIO docs, sections can have labels too. We support
them by inserting a non reactive menu item at the beginning of the
section. This item is specially flagged to be ignored while processing
changed signals from the model (since it does not correspond to any
model item)
https://bugzilla.gnome.org/show_bug.cgi?id=666681
If there's a single small window (e.g. empathy chat) in the overview, it
looks usable, because it's as big as outside of the overview, but when
you start to type, overview search is launched, which is confusing.
Fix that by setting maximum scale for window clones to 0.7
https://bugzilla.gnome.org/show_bug.cgi?id=646704
In overview when closing a window and afterwards dragging a window it can
happen that you pick a wrong window or no window if windows' positions is
updated while initiating the drag.
Fix that by delaying window rearrangement when cursor is over a window.
https://bugzilla.gnome.org/show_bug.cgi?id=645325
DND code assumes it can query the size of the actor before parenting,
while StWidget asserts that get_preferred_size() is only called
after the actor is on stage. This fixes a crash while dragging
"Connect to..."
https://bugzilla.gnome.org/show_bug.cgi?id=633028
With GJS' GDBus implementation, we get the invocation paramters as an
array if we declare a method as async.
This is bad and not consistent with what GJS does for synchronous
methods, but it's the way it is, and other classes in gnome-shell
implement this correctly by exploding the array into its components in
the method implementation, but not the screenshot methods.
Also, we're supposed to return a value using the provided invocation
object, not with a callback now, so do that.
https://bugzilla.gnome.org/show_bug.cgi?id=667662
Commit 25948f214e replaced the old hardcoded scaling behavior of
background-images with the CSS-compliant option to control that
behavior with the background-size property. Fix some fallout from
the changed default scaling behavior.
That way different system notifications, such as the ones about battery power
and the ones about software updates, are shown with separate message tray
sources.
https://bugzilla.gnome.org/show_bug.cgi?id=664138
After an item is destroyed, all its signals were disconnected,
except for 'destroy' itself. This could lead to exceptions, if
destroy was called more than once on the item.
https://bugzilla.gnome.org/show_bug.cgi?id=665680
Instead of using an St.Tooltip to show the app's name under the icon,
manually position a new St.Label ourselves. Make sure to keep the label
hidden when right-clicking so it doesn't get in the way of the popup menu.
Only one tooltip/label will be displayed at a time.
https://bugzilla.gnome.org/show_bug.cgi?id=666166
GTK+ also exports window-specific actions, by putting the object path
for the exported action group in the _DBUS_OBJECT_PATH X property.
We add this action group to the app's muxer with a 'win' prefix,
since that is what the exported menu expects. Whenever the focus
window changes, we update the window-specific actions of its
application, and emit notify::action-group to cause the app
menu to be updated.
GDBusActionGroup api has changed again, adapt to that.
Also, use a GActionMuxer to add the 'app.' prefix to actions,
instead of manually stripping it out of the action names.
In the future, the muxer will also contain per-window actions
with a 'win.' prefix.
By the time the window is first mapped and the app menu button is
synced, we may not have finished reading the menu. In that case,
connect to notify::menu and update accordingly.
Use the new GApplication support in ShellApp to create the application
menu. Supports plain (no state), boolean and double actions.
Includes a test application (as no other application uses GApplication
for actions)
https://bugzilla.gnome.org/show_bug.cgi?id=621203
When transitioning from gnome-panel to gnome-shell in 3.0 we
lost the ability to summon the wisdom of the mythical fish.
This patch restores this, for the few adepts that are aware of
the magical incantation.
(Not as configurable as the original one, but it's an easter egg
after all...)
https://bugzilla.gnome.org/show_bug.cgi?id=666606
Forcing the icon size will distort it unnecessarily, and will
in any case not work if showing an animation (which is a ClutterGroup).
Instead, set the size on the bin, and make it align its child
if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=666606
Previously the code in _accessPointAdded was iterating over the
the network list to find a good place, and at that time, added both
the network to the list and the item to the menu. When I refactored
to call queueCreateSection, I forgot to add code to insert the
network in the list.
Add it now, using the new Util.insertSorted function.
https://bugzilla.gnome.org/show_bug.cgi?id=666429
By using Main.queueDeferredWork, we can ensure that most of the
menu contents (in particular, the heaviest parts like the list of
wifi networks) are not updated immediately as we receive signals
from NetworkManager. Instead, the menu is rebuilt some time later,
or as soon as the user opens the menu.
This means that it is no longer needed to optimize for the
access-point-added case, replacing a lot of buggy code with a safer
call to _queueCreateSection, which in turn should ensure that the
more menu, if existing, is always at the end and that at most 5 networks
are visible outside it.
https://bugzilla.gnome.org/show_bug.cgi?id=664124
We need to notify when the channel dispatcher calls HandleChannels on
us with a channel we already handle. However, we don't want to notify
if we claim a new incoming channel which doesn't actually have
anything interesting in it yet.
For example, a new channel pops up just to give a delivery
notification. We want (or, need) to handle it but don't want to notify
for it.
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=666243
Signed-off-by: Jonny Lamb <jonnylamb@gnome.org>
The window overlays may be shown erroneously if hideOverlays is
called while the corresponding clone has an uncompleted tween which
calls showOverlays in its onComplete handler, for instance when
quickly leaving the overview before the initial overview animation
has finished. To fix, remove all existing tweens when hiding the
overlays.
https://bugzilla.gnome.org/show_bug.cgi?id=666020
When in overview, window labels flicker or are temporarily hidden on a
number of occasions - when simply clicking around the area the windows
are displayed in, dragging a window, sliding in the workspace list,
adding new workspaces etc. This patch makes the label for any window
visible at any given moment when in overview and the said window is
not being dragged around.
https://bugzilla.gnome.org/show_bug.cgi?id=644861
When wifi or wwan are blocked by hardware killswitch, we should not
allow changing the switch (it won't work anyway), and show
"hardware disabled" instead, similar to what we already do in the
bluetooth menu.
https://bugzilla.gnome.org/show_bug.cgi?id=665194
When placing networks in _createSection, we were taking in
consideration that _activeNetwork is always first, by adding 1,
but then kept this offset also for networks following it (normally,
all of them, since _activeNetwork is also the most recently used),
that instead should not be affected by the movement.
This resulted in the menu showing 4 networks + More... instead of
5.
https://bugzilla.gnome.org/show_bug.cgi?id=664124
The three boxes for the ripple animation are visible when created. This
means that the drag and drop code that searches for an actor to handle
the drag can find the ripple boxes instead of the Activities button or
hot corner. The latter can handle drag and drop while the ripple boxes
can't.
This is only a problem if drag and drop is attempted before the ripple
animation has been played: the boxes are made invisible at the end of
the animation. The fix is to just create the boxes invisible.
Instead of leaving the tray covering the whole last pixel row when it's
hidden, hide it completely. This avoids mouse events not being delivered to
application windows on the last pixel row.
To summon the tray we use a single reactive pixel on the corner.
https://bugzilla.gnome.org/show_bug.cgi?id=663366
The dash handles 'window-drag-cancelled', to be able to do the
animations for drag snap-back and size changes in parallel. As
the signal is not emitted for previews in the workspace switcher,
it does not work in that case.
If workspaces-only-on-primary is false, swipe scrolling is now
broken with multiple monitors. To fix, let workspacesDisplay
handle swipe scrolling for all views.
https://bugzilla.gnome.org/show_bug.cgi?id=652580
If workspaces-only-on-primary is false, workspaces should be shown
on each monitor; rather than letting the existing workspaces span
the entire screen, manage one workspacesView per monitor (similar
to the extra workspaces in WorkspacesView when the setting is true).
https://bugzilla.gnome.org/show_bug.cgi?id=652580
Extra workspaces are special, in that they collect windows from
all workspaces for a particular monitor. This matches the default
behavior, but we need more than a single workspace per monitor if
workspaces-only-on-primary is false, so don't create the extra
workspaces in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=652580
WorkspacesDisplay was introduced to manage the workspace objects
and views; however, the overview still accesses the view held
by the workspacesDisplay directly, which is a bit odd.
Add some additional methods needed by the overview, and make the
view a private property.
https://bugzilla.gnome.org/show_bug.cgi?id=652580
When installing an extension at runtime, we accidentally swapped the 'type'
and 'enabled' parameters. While this doesn't directly affect anything right
now, as everything works coincidentally, future patches that look at the
'type' parameter to decide what to do would get the wrong answer.
The last patch in the sequence. Every place that was previously
setting prototype has been ported to Lang.Class, to make code more
concise and allow for better toString().
https://bugzilla.gnome.org/show_bug.cgi?id=664436
All classes that have at least one other derived class (and thus
benefit from the framework) have been now ported. These includes
NMDevice, SearchProvider, AltTab.SwitcherList, and some other
stuff around.
https://bugzilla.gnome.org/show_bug.cgi?id=664436
Third step in the class framework port, now it's the turn of
MessageTray.Source and MessageTray.Notification, as well as
the various implementations around the shell.
https://bugzilla.gnome.org/show_bug.cgi?id=664436
The Lang module in gjs has recently gained a small yet powerful
Class framework, that should help improve the readability of code
when using complex inheritance.
This commit starts porting shell code, by rewriting all classes in
popupMenu.js (and all derived classes) to Lang.Class.
https://bugzilla.gnome.org/show_bug.cgi?id=664436
No idea why connecting a key-press-event to a non-reactive actor
used to work, but some Clutter update broke it. Obvious fix is
to make the actor reactive.
https://bugzilla.gnome.org/show_bug.cgi?id=664582
We prefer to ask the user for his own password. If PolicyKit
is not configured to accept that, try the root password. If
PolicyKit does not accept that either, ask for password of
the first user that PolicyKit _will_ accept. The last case
is a bit broken, but should rarely occur in real-life
configurations.
https://bugzilla.gnome.org/show_bug.cgi?id=651547
If no telepathy accounts have been set up or enabled, the IM status
chooser won't have any effect. To avoid confusing behavior, make
the status selector insensitive in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=662800
ComboBoxMenuItems use ClutterClones to reconstruct the active item
in the associated ComboMenu, so pseudo class changes due to state
changes of the ComboBoxMenuItem don't have the intended effect
(since the actual style information is taken from the associated
ComboBoxMenu item).
As a fix, propagate relevant pseudo class changes to the active
ComboBoxMenu item.
https://bugzilla.gnome.org/show_bug.cgi?id=662799
ComboBoxMenuItems use ClutterClones to reconstruct the active item
in the associated ComboMenu to not impose a particular MenuItem type
in the menu. However, this results in style changes (for instance
those triggered by icon-theme or text-scaling-factor changes) of
the ComboBoxMenuItem not having a visual effect until the ComboBoxMenu
is shown.
As a fix, force a style update on the ComboBoxMenu when the item's
style changes.
https://bugzilla.gnome.org/show_bug.cgi?id=662799
The option was merge with 'visual-bell-type' with the GSettings
port, but the change turned out too disruptive for the universal
access menu / settings panel, so gsettings-desktop-schemas commit
a5819b2a4e9 re-added the separate option.
- replace some left-over references to GnomeSession.Presence.setStatus()
- the correct replacement for GnomeSession.Presence.getStatus()
is *not* GnomeSession.Presence.connectSignal('StatusChanged')
This continues the series of patches for GDBus porting, affecting
all code that accesses remote DBus objects. This includes modemManager,
automount, autorun (for the hotplug sniffer), calendar, network (for
nm-applet only), power, scripting (for perf monitor interface)
https://bugzilla.gnome.org/show_bug.cgi?id=648651
Port org.gnome.ScreenSaver and org.gnome.SessionManager glue code
to use GDBus, and move /org/gnome/Shell/EndSessionDialog to the
GDBus connection, so it is backed by the org.gnome.Shell name.
https://bugzilla.gnome.org/show_bug.cgi?id=648651
Rewrite code acquiring dbus names so that it uses GDBus, and rewrite
ShellDBus so that it is exposed on the GDBus connection. Ports of
the other objects will follow.
https://bugzilla.gnome.org/show_bug.cgi?id=648651
When changing _findNetwork with _findExistingNetwork, I changed
the return value to avoid searching twice for the access point,
and changed some names. I forgot to update all points where those
names were used.
https://bugzilla.gnome.org/show_bug.cgi?id=663278
Previously, we connected to notify::strength only if there was
already a signal connected, and the AP changed (thus, by induction,
we never connected). As a result, the icon became stale and different
from that shown inside the menu (which is correctly updated).
https://bugzilla.gnome.org/show_bug.cgi?id=650007
We must look for the actor under the pointer in the whole message tray and not
just in the notification. This will avoid us to capture focus when a
notification comes up with the pointer on the whole tray area.
https://bugzilla.gnome.org/show_bug.cgi?id=661358
Add "Mute"/"Unmute" option to the right click menu for chats to allow muting conversations
without blocking the sender or disabling all non-urgent notifications. Muting a conversation
prevents the pop up of notifications on new messages from the muted source, while these
messages are still available from the summary notification in the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=659962
SubMenuMenuItems close automatically with their parent, however
closing fails when the parent item is a MenuSection, as those
currently ignore any open()/close() requests.
At some minimal handling by emitting the 'open-state-changed' signal,
so children like SubMenuMenuItems work as expected.
https://bugzilla.gnome.org/show_bug.cgi?id=661029
PopupMenu.firstMenuItem returns a PopupMenuItem, not an apObj. We
need to retrive the latter using the _apObj property.
Also, somehow the property from the number of elements in a menu
was changed from .length to .numMenuItems, and this broke the
destruction of the menu upon emptying it.
https://bugzilla.gnome.org/show_bug.cgi?id=659277
Calling nm_access_point_get_ssid() in the handler of the
access-point-removed signal can result in DBus request, which will
then fail because the object was already removed at the server side.
Instead, use a difference function to retrieve the access point
object (the network), that compares directly by object identity.
https://bugzilla.gnome.org/show_bug.cgi?id=651378
