Account for the search entry space at the bottom (the former message
tray clone) individually in each side control, instead of packing
another actor in the overview.
This allows us to extend the central view all the way to the bottom,
while still keeping controls centered vertically.
https://bugzilla.gnome.org/show_bug.cgi?id=693987
Don't show the message tray in the overview by default. From now on the
message tray in overview behaves as regularly, i.e. it will slide up the
overview on Super+M keypress.
https://bugzilla.gnome.org/show_bug.cgi?id=693987
StBoxLayout always fills on the orthogonal direction, so the icon
becomes distorted as the layout grows to accomodate more details.
Instead, use a bin that aligns at the start.
https://bugzilla.gnome.org/show_bug.cgi?id=693822
ScreenShield uses Notification.bannerBodyText to fill the body of detailed
notifications, so use a separate boolean property to indicate it was already
added to the body.
https://bugzilla.gnome.org/show_bug.cgi?id=693822
Calling onUngrab() may change key focus, either directly or
indirectly (e.g. hiding the actor). Such key focus changes
would cause an extra actor to be ungrabbed, so make sure to
ignore such focus changes while we're ungrabbing.
https://bugzilla.gnome.org/show_bug.cgi?id=693975
If we don't this for a nested grabFocus grab, the notify::key-focus
will be called, not think that the new key focus is part of the
grab, and cancel the full grab. This leaves the grab helper in an
inconsistent and confused state, as the grab is pushed onto the
grab stack after.
https://bugzilla.gnome.org/show_bug.cgi?id=693975
While debugging, I found that the signal to focus-window-changed
was never getting disconnected, making a call to ungrab every time
the focus window changed, even if there were no focus grabs anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=693975
When we reset the state of the checked button due to the overview
showing and hiding, block the normal checked callback and immediately
switch to the workspaces page, so that windows seamlessly fade in.
https://bugzilla.gnome.org/show_bug.cgi?id=693974
Set the checked property explicitly. This is because
resetShowAppsButton() will only be used to flip the button state
blocking the page change in a future commit.
https://bugzilla.gnome.org/show_bug.cgi?id=693974
And use it in overviewControls. When we moved this code from overview.js
to overviewControls.js we lost a condition so we now slide in controls
even when going back from the overview, which looks bad.
https://bugzilla.gnome.org/show_bug.cgi?id=693974
Early on, search was based on a list of terms, which was like a set
of tags, in that terms were OR'd, and that order didn't matter. As
such, modifying any one of the terms wouldn't produce new results.
Nowadays, providers take the order into account, so a substring
should only be the case if new terms are added to the end.
https://bugzilla.gnome.org/show_bug.cgi?id=693935
If WindowOverlay.relayout() is called without animation, we must stop
any preexisting animation, otherwise it will continue to run with the
previous parameters and cause the overlay to end up in the wrong position.
https://bugzilla.gnome.org/show_bug.cgi?id=693970
The slideX property controls the allocation of the view selector; since
we now know when there are no visible views from the page-empty signal,
we can use it to set the full slideX for the next page at that time,
allowing the new view to fade in with the right width.
This allows us to use simple x translations for the side components when
switching pages, keeping the noise due to resizes at the minimum.
The slideX resize for now is kept for DnD, and will always be needed for
the thumbnails box when showing the windows page.
https://bugzilla.gnome.org/show_bug.cgi?id=693924
If we increment our index variable while looping, this means that
firstNewEvent will be one higher than it should. With a length 1
array, all events will be removed, so this has a cascading effect
that events will not be stored at all.
https://bugzilla.gnome.org/show_bug.cgi?id=693854
NMClient recently got more heavyweight, with a property holding supported
connections. As fully initializing a NMObject is a recursive operation
and requires multiple DBus calls, switch to async initalization for NMClient
and NMRemoteSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=683288
We want to make Tweener short-circuit animations when resources are
constrained, so this is not going to work.
Instead, use a one-second timeout until the seconds left reach zero.
https://bugzilla.gnome.org/show_bug.cgi?id=655746
After moving the dummy source actor, we still have to poke the
boxpointer so that it gets repositioned.
This has always been broken but went unnoticed until now since none of
the commonly used engines currently depend on this method. Thanks to
Mathieu Bridon for pointing it out.
https://bugzilla.gnome.org/show_bug.cgi?id=691902
setCandidates() has too many arguments and setting the orientation
isn't particularly related with it. It might also be useful to switch
orientation without changing the candidates.
https://bugzilla.gnome.org/show_bug.cgi?id=691902
Make it look more like the mockups.
In order to do that we stop using PopupMenu and friends as it doesn't
really buy us anything and just makes it more cumbersome to add the
style classes we need.
https://bugzilla.gnome.org/show_bug.cgi?id=691902
SlideLayout is a fixed layout that takes care of requesting and
allocating the right sizes so its contents can slide horizontally as the
actor is resized.
Sliding is controlled with a slideX and slideDirection properties, which
do the right thing wrt. RTL automatically.
Also add a SlidingControl base class that will be used by the overview
to pack and slide the workspace thumbnail switcher and the dash.
https://bugzilla.gnome.org/show_bug.cgi?id=682050
This is nothing but a middle man, as the view selector already owns
the search system. We want to start being a bit more tricky with what
we do with the search system so that we ignore whitespace, so let's
cut the middle-man out now.
https://bugzilla.gnome.org/show_bug.cgi?id=693458
Have two branches, one for input region and one for struts. This
makes it easier to skip one of the branches, like in the case where
we want to skip input regions if we have a popup menu visible.
https://bugzilla.gnome.org/show_bug.cgi?id=633620
reparent() defines the new actor stacking order based on the
existing depth of the actor, which is flat out wrong. Simply
remove the actor from its old parent and add the new one in.
https://bugzilla.gnome.org/show_bug.cgi?id=633620
GrabHelper saves the actor that had key focus when taking over the grab
(if any). On ungrab, the key focus is either restored or moved to some
child of the saved actor. The latter is unexpected and causes some odd
behavior, so don't be fancy and only restore the actual focus.
https://bugzilla.gnome.org/show_bug.cgi?id=693570
The notifications spec has two hints for playing a sound, sound-file
and sound-name. We can support them using the existing code that
wraps libcanberra.
https://bugzilla.gnome.org/show_bug.cgi?id=642831
Message tray and on-screen keyboard are now exclusive, so remove
all code that shuffles boxes around to make it possible to show
both at the same time.
https://bugzilla.gnome.org/show_bug.cgi?id=662687
The message tray currently operates in three modes: in the overview,
normal, and while the on-screen keyboard is up. The last case is
particularly odd, and exclusively used for chat-notifications. As
users can still use the Chat application directly on touch-only
devices, the additional mode isn't really justified, so remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=662687
The screenshield was not checking the return value of pushModal(), meaning
that it believed it was fully locked when it was not. Later, calling
popModal() would fail, causing an exception and blocking the unlock.
Now when we fail we include an explanatory message, pointing the user
to the actual cause of the issue.
https://bugzilla.gnome.org/show_bug.cgi?id=689106
The curtain animation looks jerky at its current speed, and more so if
we blank the screen immediately at the end. Make it a little slower and
it becomes more confortable.
https://bugzilla.gnome.org/show_bug.cgi?id=691964
When there are multiple sessions, we may get a polkit dialog in
response to clicking 'Reboot' in the end session dialog. If the
polkit dialog gets canceled or otherwise ends unsuccessfully,
we are left with the lightbox that the end session dialog puts
up when 'Reboot' is clicked. To remove the lightbox and make the
session fully functional again, gnome-session will call Close.
https://bugzilla.gnome.org/show_bug.cgi?id=688915
A pressure barrier is a barrier that activates after the user pushes
against the bottom of the screen in a short time. Implement this using
the new XInput 2.3 features that provide extended information about
pointer barriers, and use it so that pushing against the bottom of
the screen edge brings up the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=677215
As pressure barriers need a signalling mechanism to provide
information about when and where they are hit, an object which
provides a signal is a more appropriate abstraction for a pointer
barrier than a functional ID-based approach. Mutter has gained
pointer barrier wrappers, so use its objects instead of ours.
https://bugzilla.gnome.org/show_bug.cgi?id=677215
If the screen lock is enabled, lock the screen before suspension.
When using systemd, this will cover both explicitly suspending from
the user menu and suspension initiated by g-s-d (lid close, power
button).
https://bugzilla.gnome.org/show_bug.cgi?id=686482
If screen locking is enabled, the screen shield should drop down
on suspend. Currently this is achieved by either explicitly locking
the screen (when selecting "Suspend" from the user menu) or by
relying on g-s-d delaying the suspension enough time for the shield
to get into place (lid close, power button).
Systemd inhibitors offer a safer way to ensure that the screen is
locked before going to sleep, so add a small abstraction for them
in the loginManager - with inhibitors being a systemd-only feature,
the ConsoleKit path only has a dummy implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=686482
While it is possible to keep track of removed sources by tracking
their summary items' actor:.destroy signal, a dedicated signal
mirroring the existing 'source-added' one is more convenient.
https://bugzilla.gnome.org/show_bug.cgi?id=693220
The panel used to provide an .in-overview class which was removed after
the theme stopped using it. Classic mode should use a different top bar
style in the overview, so bring it back (but use a pseudo class this
time for consistency with MessageTray and ActivitiesButton).
https://bugzilla.gnome.org/show_bug.cgi?id=693218
This commit removes all the code in charge of playing with the database of
mobile providers, which was originally included in order to perform
MCCMNC->OperatorName and SID->OperatorName conversions.
This logic is now exposed by libnm-gtk.
https://bugzilla.gnome.org/show_bug.cgi?id=688943
LTE-only modems need to be treated as GSM/HSPA modems, as they all are 3GPP
modems and they all need the same kind of configuration (APN, user, password,
PIN...).
https://bugzilla.gnome.org/show_bug.cgi?id=688144
ModemManager >= 0.7 comes with a new DBus interface. This patch makes the shell
work with the new interface if the modem is detected as being exposed by the new
ModemManager (based on the device.udi string reported by NM).
https://bugzilla.gnome.org/show_bug.cgi?id=687359.
Gnome session started to track the session's active state a while
ago, so use that instead of our own ConsoleKit/logind abstraction
in LoginManager.
https://bugzilla.gnome.org/show_bug.cgi?id=693161
Now that we have an explicit active-but-not-locked state, we should
use different signals to notify changes. lock-status-changed is
renamed to active-changed, and a new locked-changed is introduced.
https://bugzilla.gnome.org/show_bug.cgi?id=693007
While we handle the case where ibus_bus_get_global_engine() returns
NULL, this case actually generates an exception we have to catch to
avoid some (harmless) console spam.
https://bugzilla.gnome.org/show_bug.cgi?id=692995
In time span between idle and lock the shield should behave like autologin,
but should prevent accidental reactivation (for example when using a touch
screen) by showing the curtain.
https://bugzilla.gnome.org/show_bug.cgi?id=692560
gnome-settings-daemon wants to use ActiveChanged to drive screen
blanking policies.
I also added two big comments that should cover all cases, to clear
up what's happening when the idle timers fire.
https://bugzilla.gnome.org/show_bug.cgi?id=691964
We must remove music notifications before we're destroyed, otherwise
they get destroyed with us.
Also, integrate a review comment I previously forgot.
https://bugzilla.gnome.org/show_bug.cgi?id=685926
Some notifications, despite being emitted by shell code, should appear
to be from application or "separable" system components. Do that by
associating them with a notification-daemon policy.
Note that for this to look really good, empathy should rename itself
to Chat.
https://bugzilla.gnome.org/show_bug.cgi?id=685926
The designs says that only music notifications should be shown in full
in the screenshield, the others should be either shown as a summary or
with very light details.
https://bugzilla.gnome.org/show_bug.cgi?id=685926
Allow message tray sources to provide a NotificationPolicy object,
that will configure how and if the source is displayed. For notification
daemon sources, this object is hooked to GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=685926
Use the new Hash.Map class, and store signal connections along with
the source and summaryItem. This allows to remove sources without destroying
them.
https://bugzilla.gnome.org/show_bug.cgi?id=685926
A simple implementation of the ES6 Map proposal, internally
done as a hash table, using System.addressOf() to support keys that
are arbitrary objects.
Should help replacing linear searches in various places around the shell.
https://bugzilla.gnome.org/show_bug.cgi?id=685926
syncSectionTitle looks at device list for the section, to understand if
the section should be visible or not, so obviously it needs to see the
new device.
I wonder when this broke.
https://bugzilla.gnome.org/show_bug.cgi?id=692749
During the box pointer animation, other events can trigger an updateState,
losing the information that the summary is hiding and thus never disconnecting
the signals. Then, this stale connections can cause stacktraces, as they
fire when summaryBoxPointerItem is null.
https://bugzilla.gnome.org/show_bug.cgi?id=692693
Hiding notificationWidget with a telepathy notification causes
unfocused to be emitted, which causes a reentrant updateState.
If another notification is queued, it is shown before the old
one is cleared.
https://bugzilla.gnome.org/show_bug.cgi?id=683986
The two classes have been gaining each other's functionality for a little
while, adding the new code wherever it was more convenient. Rather than
have a clear delineation between "This Manages Shell Chrome" and "This
Manages Shell Layout", I think it's better off if we just accept that
the responsibilities are pretty much the same.
https://bugzilla.gnome.org/show_bug.cgi?id=692677
In the overview, when there is no text in the search entry, this._searchActive
will be set to false. Moving the Clutter.Return code block ensures that
pressing enter in the search field after deleting the characters of a search
will no longer launch the #1 application for the previous search.
https://bugzilla.gnome.org/show_bug.cgi?id=692391
gnome-control-center is planning on removing its own tree in the
future. Since it already installs these applications into
/usr/share/applications, just use this for now.
https://bugzilla.gnome.org/show_bug.cgi?id=692483
The one we had before could make unmaximized windows appear to be bigger
than maximized ones, for a few reasons. Ensure that this doesn't happen
again, and add some comments to explain the whys and needs for twiddling
the individual thumbnail size.
https://bugzilla.gnome.org/show_bug.cgi?id=686944
We clamp the overall layout's scale to WINDOW_CLONE_MAXIMUM_SCALE, but since
we do a bit of tweaking to try and make super small windows a tad larger, it's
theoretically possible that windows may become larger than the proper maximum
scale. Fix this issue.
https://bugzilla.gnome.org/show_bug.cgi?id=686944
On large displays, we don't want the search results list to expand
across the whole screen; set a maximum width of 1000px.
Unfortunately, since in St max-width only affects size requisition, we
need a little custom layout manager to have it applied to the allocation
too.
https://bugzilla.gnome.org/show_bug.cgi?id=692453
'active' isn't terribly clear about just what is active; also, make it
private, remove an useless extra object state we were saving, and
refactor some messy code.
Based on a patch by Tanner Doshier.
https://bugzilla.gnome.org/show_bug.cgi?id=692454
In a gdm session, we may not know what mouse orientation the user
may be in, so it makes sense to support both the left and right
mouse buttons to activate login or other items.
Additionally, add the behavior to all modal dialog items, even in
a user session, because it's unlikely that the user will right-click
on buttons, and it makes for an easier implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=688748
These were lost when we moved away with StIconType. The idea was that
apps needed to include -symbolic in their action IDs, but apps were
not updated, and it never makes sense to have non symbolic icons there,
so let's restore the previous behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=692091
This fixes the image and scrollbars peeking through in banner mode,
because StTable wasn't able to allocate them at the restricted height
imposed by CSS.
https://bugzilla.gnome.org/show_bug.cgi?id=692091
We must set the image after calling .update(), because we're passing
clear: true and thus we're removing the image too.
Also, we need to specify an explicit icon size, or St.Icon will use
the default (48px)
https://bugzilla.gnome.org/show_bug.cgi?id=692091
destroy() checks if we are visible to decide whether to destroy the
actor immediately or after a fade out animation. Since actors are
visible by default it would always end up destroying only after the
animation time.
https://bugzilla.gnome.org/show_bug.cgi?id=691963
If nothing references the idle monitor, it can be finalized at GC,
causing it to have no effect. Worse, if the finalization happens at
wrong time, the pointer watcher can be permanently off, disabling the
message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=691976
Switching style on Overview::hiding creates a weird effect, as the noise
texture is shown while the overview is still visibile. Instead, wait for
the tray to be fully hidden, then apply the new style.
As now the switch is invisible, there is no need for the transition
(which introduced the same problem on overview showing)
https://bugzilla.gnome.org/show_bug.cgi?id=689091
Add an style class targetting workspaces located outside the overview,
and use it for extra padding around the window clones. Padding is passed
down and applied inside LayoutStrategy, consolidating code that previously
handled the bottom side only.
https://bugzilla.gnome.org/show_bug.cgi?id=690171
The "flash" effect looks awkward when it fades in and out. Real
camera have an immediate flash of light, which then seems to fade
out as our eyes readjust the rapid change in lighting.
https://bugzilla.gnome.org/show_bug.cgi?id=691875
This is similar to how the dateMenu already allows opening the calendar
application. However, the new entry only appears if GNOME Clocks is
installed, as it is not a core GNOME application.
https://bugzilla.gnome.org/show_bug.cgi?id=644390
NM 0.9.7 is still not released even as a tarball, so fix this to work
with 0.9.6 again for now (although it doesn't do any device name
disambiguation in this case now).
https://bugzilla.gnome.org/show_bug.cgi?id=691720
If the setting is enabled, we record the last activated input source
for the currently focused window and switch to it when focusing back
that window. The Overview is considered a window for this purpose.
https://bugzilla.gnome.org/show_bug.cgi?id=691414
The current code parses the button-layout setting because MetaButtonLayout
was not usable from introspection. With that fixed, we can switch to
using meta_prefs_get_button_layout().
https://bugzilla.gnome.org/show_bug.cgi?id=689263
Due to limitations and bugs in SpiderMonkey's GC, wrapper objects
for cairo contexts and similar may not get cleaned up immediately
after repainting, leading to leaking memory. Explicitly disposing
of such objects after they're not needed can clean up large portions
of memory for cairo surfaces.
https://bugzilla.gnome.org/show_bug.cgi?id=685513
With panel buttons changing dynamically on session mode changes we can
no longer rely on a corner's respective box style-changed signal to
find the nearest button.
Instead, make the panel take care of telling the corners to look for a
new button when buttons are changed.
https://bugzilla.gnome.org/show_bug.cgi?id=690180
Acting on each Show/Hide DBus call immediately may cause a lot of
jittery movement when Alt+Tabbing or even just switching tabs in
e.g. gnome-terminal.
To make the OSK feel sturdier, we wait a bit before actually showing
or hiding it so that we can coalesce tight sequences of Show/Hide
calls. I.e. the last call wins which means that we might end up not
doing anything.
https://bugzilla.gnome.org/show_bug.cgi?id=688646
We can't pushModal() when showing the subkeys popup because that will
cause the application to lose focus and thus we get a Hide() call for
the whole OSK.
Instead, capture events on the main OSK actor while the subkeys popup
is shown so that we can both prevent events from reaching the main
keys but also cancel the subkeys if the user clicks away in the OSK.
https://bugzilla.gnome.org/show_bug.cgi?id=674955
Since we're breaking API already, take this as an occasion to use a
separate interface for all the screenshot-related methods. The interface
name is org.gnome.Shell.Screenshot.
Internally, move all the related code to screenshot.js.
https://bugzilla.gnome.org/show_bug.cgi?id=688004
Since we also support passing a basename now, clients might be
interested in knowing the path used to save the file.
Add an out argument to the interface for that.
https://bugzilla.gnome.org/show_bug.cgi?id=688004
If a non-absolute path is passed to the screenshot methods, treat it as
a basename for the output image, and automatically try to save it in
$XDG_PICTURES_DIR, falling back to $HOME if it doesn't exist.
https://bugzilla.gnome.org/show_bug.cgi?id=688004
