When adding a favorite, we add the ID to the list of favorites, save the
setting and add the new app to the favorites map. However as writing the
settings value already results in reload() to update the favorites map,
the new app is usually already in the map when we add it.
The only exception is when the ID was found in the RENAMED_DESKTOP_IDS map,
in which case we end up adding both the renamed app and the original one.
Fix this by simply relying on reload() to properly update the map, just like
we already do in _removeFavorite().
https://gitlab.gnome.org/GNOME/gnome-shell/issues/471
On X11, reactive chrome must be added to the input region in order
to work as expected. However that region works independently from
any window stacking, with the result that the unresponsive-app dialog
currently blocks all input in the "covered" area, even in windows
stacked above the unresponsive window.
The correct fix would be to track the unobscured parts of the dialog
and set the input region from that, but that's quite cumbersome. So
instead, only track chrome when the corresponding window is focused
(or the dialog itself of course).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/273
As a mount operation's UI may be reused (for example after mistyping
the password), we only close the operation once the mount has finished
(successfully or with error).
We therefore need to track ongoing operations, which we currently do
by monkey-patching the corresponding volume object. However while the
underlying GVolume object indeed remains the same through-out the
operation, the JS wrapper object isn't referenced anywhere and may
thus be garbage collected, resulting in a stuck dialog.
Fix this issue by tracking active operations explicitly, so that all
involved objects are referenced until the end of the operation.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/565
Whenever a command runs in the run dialog, it
will be added to the history unless it is
already the last entry. This does not apply
for entries that are not consecutive, which can
result in long chains of commands which
alternate, e.g. lg, r, lg, r, lg, r. Not only is
this wasteful in terms of space, but also
inconsistent with how history works elsewhere,
e.g. in the shell.
Therefore, remove entries in the history that are
equal to the one that will be added to the end of
of the history when the entry already exists.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/524
The `hints` and `settingName` parameters to the agent call may define
the specific list of secrets NM actually needs from the user. This
seems to have been the intended use of these two parameters but only
recently did NM with the IWD backend start to use this to request 802.1x
secrets. So if `hints` is provided, ask user for the specific secrets
listed there and don't even look at what type of EAP method is in use.
Only the three types of secrets actually in use by NM's IWD backend are
supported for now -- they happen to be the same three that
_get8021xSecrets() had already supported.
This attribute was previously only assigned in show(). hide() compares
this attribute to 0. If hide() is called before show() is first called,
the comparison would give the correct result (undefined > 0 is false)
but log a warning:
JS WARNING: [resource:///org/gnome/shell/ui/workspacesView.js 529]:
reference to undefined property "_restackedNotifyId"
Initialize this attribute in _init(), alongside _scrollEventId and
_keyPressEventId which are also used in hide().
dialogContent is set to one of the elements of the list DialogContent,
but not all of those have a checkBoxText property. When logging out (as
opposed to shutting down), this causes a warning:
JS WARNING: [resource:///org/gnome/shell/ui/endSessionDialog.js
763]: reference to undefined property "checkBoxText"
(The line number corresponds to this line in 3.28.3.)
The warning is apparently not triggered if the undefined property is
used as part of a boolean expression:
gjs> var x = {};
gjs> x.a;
typein:2:1 strict warning: reference to undefined property "a"
gjs> if (x.b) { log('oh no'); }
gjs> x.c || ''
""
_setCheckBoxLabel() just checks the truthiness of its 'text' argument,
and the empty string is false-y, so passing '' rather than undefined has
no functional effect.
In recent Fedora 29, connecting to wifi access points from the
user menu (top-right menu) does not work. Clicking the 'Connect'
button just animates it but does nothing else. The logs show an
error "JS ERROR: Error: Expected type utf8 for Argument
'specific_object' but got type 'undefined'".
Looking into this, it seems the problem is these uses of the
`path` property of an NMAccessPoint. NMAccessPoint inherits
from NMObject, and NMObject *does* have a path property:
https://developer.gnome.org/libnm/stable/NMObject.html#NMObject--path
so at first glance this seems fine. But I poked around a bit
using libnm via Python (which goes via introspection, just like
this JS code does), and found that indeed AccessPoint objects
don't seem to have a `path` property there either.
Looking at the libnm code, this actually makes sense, because
the property is marked "(skip)":
https://github.com/NetworkManager/NetworkManager/blob/master/libnm/nm-object.c#L1291
and the introspection docs suggest that means it should be left
out of introspected output:
https://wiki.gnome.org/Projects/GObjectIntrospection/Annotations#Symbol_visibility
I'm a bit concerned that this was only found recently - whereas
the change to use `.path` in gnome-shell dates from October 2017
(d71af5e5) and the property has been marked (skip) in NM since
at least 2016 - but this all seems to add up. The obvious fix is
to replace use of `.path` with `.get_path()`, which returns the
path and is *not* marked (skip) and so *is* available via
introspection. I tested that this works in Python and also did
a test build of gnome-shell with this change and installed it on
an affected system, it does seem to fix the bug.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
gjs's D-Bus convenience explicitly expects a string representation
of an interface, but the new convenience method to load an XML
description from a resource introduced in commit f42d9df3e0 only
returns a string when using gjs from the GNOME 3.30 release. We
have so far managed to keep compatibility with the previous stable
gjs release, so fix up the fallback code to cast to string.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/578
Commit dbf993300a moved all inline D-Bus interface descriptions to template
strings so we can stop escaping line breaks.
Unfortunately that unveiled a grave bug in xgettext, which currently cannot
handle files that contain both backtick and slash characters - as a result,
translations from affected files have started to disappear as translators
run xgettext/msgmerge.
Instead of reverting the change and getting the crusty escaping back, we
will take this as an opportunity to stop inlining the XML altogether and
load it from a resource instead.
To facilitate that, add a small helper method that loads a D-Bus interface
description from a dedicated resource bundle.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/537
In GNOME-3.24, pressing Super+P or a similar function key would cause
a switch to the next available monitor configuration.
However, in GNOME-3.26, this was reimplemented in mutter and gnome-shell
and the behaviour is now different: pressing Super+P and releasing will
cause no change in montor configuration[1]. In this new design you have
to press Super+P and keep holding Super in order to keep the switcher
open, then press P again (or use the arrow keys or mouse) to
select the next one in the list.
This is incompatible with many Asus products such as Asus X530UN, where
pressing the presentation mode media key (Fn+F8) actually generates
the following keypress events from the keyboard controller:
Fn pressed: nothing
F8 pressed: nothing
F8 released: Super press, p press, p release, Super release (quick burst)
Fn released: nothing
With this firmware behaviour it's not possible to hold the keys and have
the dialog come up so that you can select another new mode.
To solve this, when the switcher is opened, select the next available
display config by default, which is more similar to the pre-GNOME-3.26
behaviour. Now pressing Fn+F8 on this laptop will result in the display
mode switch taking place.
[1]: The mentioned desired behaviour will at least happen after
https://gitlab.gnome.org/GNOME/mutter/issues/281 has been fixed
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/208
Since we always keep the active workspace until the user switches
to a different one, we may end up with two empty workspaces at
the end. It's not obvious to users why this happens, and there's
indeed no good reason for the behavior - just remove the trailing
workspace in that case.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/536
Meta.ScreenDirection no longer exists. This fixes window menus on
multi-monitor systems.
JS ERROR: TypeError: Meta.ScreenDirection is undefined
_buildMenu@resource:///org/gnome/shell/ui/windowMenu.js:135:17
`NMConnectionDevice._sync()` is responsible for setting up the active
connection that we'll end up displaying. It expects the active
connection to already be in a map `_connectionItems`. If it isn't in
there, we get a null dereference and the indicator can get into a weird
state where it doesn't display devices / connections properly.
Let's change this expectation. If there is an active connection,
`_deviceAdded()` will eventually get to it and call `_sync()` to set up
the active connection state. We make `_sync()` tolerate there being no
active connection when it's called.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/140
We must remove the GFile reference from the representing object when an
extension has been unloaded as this won't be used anymore later (e.g. as cached
ref).
Throw an error using an informative message in case a mode uses a stylesheet
that can't be loaded, instead of crashing later because the theming can't be
properly computed, and thus the minimum size of the actors.
We currently assign the stylesheet to an extension whenever the file exists,
regardless of whether it actually loaded successfully or not.
And thus we load an extension that ships a stylesheet even if that file can't
be used.
There is no point in trying to load an extension if its stylesheet wasn't
loaded in the first place, so make sure this happens only on success.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/188
Ensure that the search provider operations (just getResultMetas requests
in the current implementation) in progress are properly cancelled when we
clear the UI, otherwise returned results might still be added when not
needed.
This is triggered for each provider by the SearchResults reset.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/205
Currently when the overview is hidden, any pending search is kept alive,
not only at remote search provider level (as per issue #183), but even
the shell providers proxies continue to get and process data. This happens
even if this is not needed anymore, while the UI reset is performed only
next time that the overview is shown (causing some more computation
presentation time).
In order to stop this to happen, when the overview is hidden, we have to
unset the search entry to an empty value as this would make SearchResults
to have empty terms list and that would make the proxies cancellable to
be triggered (without causing any further search to start).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/205
If the volume is removed before AUTORUN_EXPIRE_TIMEOUT_SECS seconds, we can stop
the timeout earlier as there's nothing to unset, while the volume instance
won't be valid anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
The _sync function for Message only updates the close button visibility,
so we can safely stop doing that if the close button get get destroyed earlier
(as it happens when clicking on it).
https://bugzilla.gnome.org/show_bug.cgi?id=791233
We need to avoid that we use the _dragActor instance after that it has
been destroyed or we'll get errors. We now set it to null when this
happens, protecting any access to that.
Add a DragState enum-like object to keep track of the state
instead of using booleans.
Remove duplicated handler on 'destroy' and just use a generic one.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
The object manager tries to synthesize interface removal
events if the bus name of a remote object drops off the bus.
The code had bad typos in it, though: it reuses the `i`
index variable in its inner loop, where it should be using
the `j` index variable.
This commit corrects the i/j confusion.
The object manager tries to synthesize interface removal
events if the bus name of a remote object drops off the bus.
The code has a bad typo in it, though: it confuses `objectPaths`
(the list of all object paths) and `objectPath` (the object
currently being processed this iteration of the loop).
That leads to a failure to synthesize the interface removal
events, and spew in the log.
This commit corrects the objectPath/objectPaths confusion.
Previously mutter listened to Xsettings (via GTK) to get notified
whether the shell showed the app menu. After X11 support was changed in
the direction of being less central, listening to this particular
Xsettings were removed with the intention of having the Shell tell
mutter directly whether it was showing the menu or not.
This commit makes that happen. It still travels through Xsettings (still
via Gtk), as the shell still gets that state from Xsettings, but fixing
this is out of scope for this particular fix.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/276
Flag some actors that are good candidates for caching in texture memory
(what Clutter calls "offscreen redirect"), thereby mostly eliminating
their repaint overhead.
This isn't exactly groundbreaking, it's how you're meant to use
OpenGL in the first place. But the difficulty is in the design of
Clutter which has some peculiarities making universal caching
inefficient at the moment:
* Repainting an offscreen actor is measurably slower than repainting
the same actor if it was uncached. But only by less than 100%,
so if an actor can avoid changing every frame then caching is usually
more efficient over that timeframe.
* The cached painting from a container typically includes its children,
so you can't cache containers whose children are usually animating at
full frame rate. That results in a performance loss.
This could be remedied in future by Clutter explicitly separating a
container's background painting from its child painting and always
caching the background (as StWidget tries to in some cases already).
So this commit selects just a few areas where caching has been verified
to be beneficial, and many use cases now see their CPU usage halved:
One small window active...... 10% -> 7% (-30%)
...under a panel menu........ 23% -> 9% (-61%)
One maximized window active.. 12% -> 9% (-25%)
...under a panel menu........ 23% -> 11% (-52%)
...under a shell dialog...... 22% -> 12% (-45%)
...in activities overview.... 32% -> 17% (-47%)
(on an i7-7700)
Also a couple of bugs are fixed by this:
https://bugzilla.gnome.org/show_bug.cgi?id=792634https://bugzilla.gnome.org/show_bug.cgi?id=792633
Instead of consuming the event in front of the input method. Enter
is sometimes overriden by those, so it seems better to let the IM
handle the key event, and react later to it if it got propagated
anyway. That is what ::activate does, so use this signal.
This used to work before ClutterInputMethod/InputFocus because the
IM received the events directly from stage captured events. This
is not the case anymore.
Closes: #440
We used to keep the workspace switcher slid out when the user made use
of workspaces. This was changed in commit 2d84975 to give more space
to window previews, but it turned out to make the switcher quite a lot
more difficult to interact with (rather than only being a question of
discoverability). So go back to the previous behavior.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/161
During global grabs, actors miss enter and leave events required
for correct hover tracking. This can cause the workspace switcher
to get stuck while slid out, so ensure the actor's hover state is
synced after drag operations.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/161
Using a single resource file for all JS sources saves a couple of
build system instructions, but has some serious downsides:
- bundling the entire shell code with the tools blows
up their size unnecessarily
- the tools are rebuilt unnecessarily for any shell
code change
Autotools was painful enough to let this slip, but with meson we
don't have any excuses - using the actual dependencies speeds up
the build a tiny bit and reduces the tools' sizes from over 2M
to about 50k.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/192
We show a cover pane on top of the overview during transitions to
prevent issues caused by clicks and mouseover events when the overview
is not ready. Right now, this pane is only being shown on the primary
monitor, which obviosly allows interactions to happen before the
animations are finished on the secondary monitors.
To fix this, use the size of the whole stage for the cover pane.
Emitting it that soon results in JS warnings, as we don't have
everything in place yet. The position-changed signal will be
emitted from other locations as soon as we have it.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/464Closes: #464
When trying to close a window in the overview by clicking the close
button and the window doesn't get closed but a dialog is added to the
window afterwards, we close the overview and show the dialog.
Instead of adding a separate listener for the window-added signal to the
WindowOverlay, let the WindowClones remember that the close button was
pressed and activate themselves if a dialog is added after that.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/180
When a dialog is added to a window while the overview is shown, we get
its parent using get_transient_for() so we can add it to the right
window clone.
If we have multiple layers of dialogs we have to do this recursively
until we find the root ancestor. This case currently results in an
infinite loop: Since parent is always set to the same window, the
while-condition will always be true.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/180
For the OSD, all parameters except for the icon are optional - if the
caller doesn't include the 'label' option, the OSD won't show a label
etc.
While this makes sense for an API, it means that we have to be careful
to correctly differentiate an option that was omitted and an option
that has a 'falsy' value like false or 0.
Unfortunately since commit ccaae5d3c we no longer do, with the result
that OSDs meant for the first monitor will show up on all, and a level
of 0 is presented as no level bar instead of an empty one, whoops.
https://bugzilla.gnome.org/show_bug.cgi?id=791669
GSettings now recognizes per-desktop overrides that can be used
to change schemas' default values for a particular desktop. This
is not entirely unlike our existing custom override mechanism in
mutter, except that it is not limited to keys in org.gnome.mutter,
and it doesn't require a separate schema - the latter means that
we (and gnome-teak-tool) no longer have to figure out the correct
schema for the current login session and just use the original one.
https://bugzilla.gnome.org/show_bug.cgi?id=786496
Show an overamplified volume icon if volume is louder the max normalized one.
Use a similar logic as gnome-settings-daemon to delimit values, restricted
to output.
The purpose is to help users remember that visiting some websites or
using some apps can get LOUD.
https://bugzilla.gnome.org/show_bug.cgi?id=790280.
Implement for barLevel an overdrive area. This is a zone represented via a
different styling to indicate that you are bypassing the normal zone of
a given level, without reaching yet the maximum limit.
https://bugzilla.gnome.org/show_bug.cgi?id=790280.
Depending on hardware and recorded volume level, turning up the speakers
to the maximum volume may not be enough and the user will want to amplify
the volume above 100%. Currently this requires opening the sound Settings
panel which gets cumbersome when required repeatedly.
To support this case better, allow raising the sound volume above 100%
directly from the system menu if the feature is enabled via the
`allow-volume-above-100-percent` key in `org.gnome.desktop.sound`.
Allow osd representing levels that can be more than 100% by accepting
an optional parameter setting that maximum level.
gnome-settings-daemon will use this to indicate volume levels above 100%,
which our own volume indicator will soon support as well.
Ensure that both barLevel and slider can support a higher maxValue than 1
and computes various positions based on it.
It defaults to 1 if not set.
https://bugzilla.gnome.org/show_bug.cgi?id=790280.
Reuse the BarLevel class to get similar drawing behavior as Slider.
Rename theme css impacted properties and ensure that the osdWindow
remains accessible.
Ensure we don't force setting a custom border color like on the OSD.
https://bugzilla.gnome.org/show_bug.cgi?id=790280.
In a9ad91c831, a bug was introduced in the following code:
```c
this._settingsAction.connect('clicked',
this._onSettingsClicked().bind(this));
```
Notice that the callback is being executed! This commit
fixes that by removing the '()' from the callback.
As strings are guaranteed to use UTF-8 in the GNOME platform, generic
file APIs like g_file_load_contents() return raw data instead. Since
gjs' recent update to mozjs60, this data is now returns as Uint8Array
which cannot simply be treated as string - its toString() method boils
down to arr.join(',') - so use gjs' new ByteArray module to explicitly
convert the data.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/179
The settings action button in the system menu simply launches
gnome-control-center, so we want its icon (and accessible name)
to always match the app. So instead of keeping the button in-sync
with Settings, just look up that information from the app itself.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/433
We can simply request the symbolic variant from CSS so that we don't
have to append '-symbolic' to all the names. This will always make
it easier to pick up that information from external sources (like
.desktop files).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/433
Commit e5c95b910d refactored the workspace animation to also handle
animations that involve all surrounding workspaces, but due to an
ill-advised review comment (guess whose) it broke the animation
for non-neighboring workspaces.
Update the code to handle correctly whether in a given direction:
- we have the target workspace of a given index
- we have a neighboring workspace
- we don't need to animate anything
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/182
Add a debug command (to be executed manually via Alt+F2) to check
that all of gnome-shell's file descriptors have the CLOEXEC flag set.
This is important so that internal file descriptors do not get passed
to apps when they are launched.
It prints a warning message for every fd that does not have the flag set.
fdwalk() is used from the standard library if available (it is not
available in glibc), otherwise we use the same implementation as glib
has internally.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/132
When 4fg swipe motion happens, set up early the workspace switching
animation with all surrounding workspaces. This allows us to move
all content back and forth in any direction. This works on both
touchcreens and touchpads.
When the gesture is activated, the same data is reused to follow
up with the tween animation.
The threshold has been also doubled, it was fairly small to start
with, and feels better now that workspaces stick to fingers.
https://bugzilla.gnome.org/show_bug.cgi?id=788994
Besides the separation into distinct functions, the stored data has
been made able to generically store windows from all surrounding
workspaces. All while keeping a special mode to animate between two
workspaces (The usual till now), this is the only mode exercised so
far.
In order to ease animations, all window groups are now children of
a common container, which is then animated.
A custom callback type is more convenient, but only as long as no
other callback type is required. We are about to add functionality
that does not return the filename to a screenshot saved on disk, so
prepare for that by moving to GIO's generic async callback pattern.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/286
Fullscreen windows cannot be restored by touch device users unless the
application adds support for it.
As it is unlikely to change all application lets introduce a top edge
drag gesture which unmakes fullscreen windows.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/123
Make the indicator for active remote access use the warning color, to
indicate the severity of allowing remote access.
This only makes the indicator icon orange; the icon in the system menu
is still white.
When in lockscreen mode there's no point of resetting the auth login as there's
no welcome screen, and that would just cause the UI to freeze, with no reason.
This could have been useful if we were stopping the user to login for a given
time after ALLOWED_FAILURES attempts, but this is not the case yet.
When we get a reset signal the preemptiveAnswer should be also unset or it will
be used next time the user authPrompt will be activated, even without any further
user interaction.
Fixes#311
Add an indicator for when there is something access the display server
remotely. This could be 1) remote desktop, 2) screen cast or 3) remote
control, but all effectively applications using
org.freedesktop.portal.ScreenCast or org.gnome.portal.RemoteDesktop as
well as gnome-remote-desktop using the corresponding org.gnome.Mutter
APIs directly.
As it is now, it'll simply show a single icon for when anything is
having an active session, and a single action "Turn off" that'll close
every active session.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/160
The input method may hint that certain keycodes should be pressed/released
besides the textual information in ::commit. An example is hitting space
in some IMs to commit text, where both ::commit happens, and an space is
visibly inserted. In order to handle this properly, we must honor
::forward-key-press.
In order to cater for the case that a keypress is forwarded while handling
that same keypress in a physical keyboard, check the current event being
handled and just forward it as-is if it matches. This is necessary to
prevent state from being doubly set, and the second event silenced away.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/275Closes: #275
If we're started by systemd, we won't be in the user's display session.
However, this is still the session that will get locked & unlocked. Ask
logind what the 'display' or 'greeter' session is, and watch for the
Unlock signal for that session to know when to unlock.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/137
For windows, the cursor location needs to be adjusted by the frame
offsets. However we cannot assume that there is a window, as the
shell itself can have the key focus.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/414
Maximized and tiled windows can be restored with a drag gesture,
not only from their titlebars, but also from any non-reactive
parts of the top bar above the window. Currently this only works
for actual pointer devices, extend the behavior to handle touch
as well.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/112
If the Escape key is used for a window/app cycler/switcher shortcut
(such as "Switch windows directly"), then there is no way to cancel
the switching/cycling operation with the keyboard.
This change allows cancelling such an operation by pressing the Tab
key, but only if Tab is not already being used by the current
switcher/cycler shortcut.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/315
Key events involved in a keyboard shortcut are not completely consumed by
Mutter. That means that if the popupMenu is bound to a shortcut (e.g.
Alt<Space>) and the user keeps the keys pressed, the same key-event will be
delivered to the popupMenu. We can workaround this issue filtering out all the
events where a a modifier is down (except capslock).
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/372
Destroying and recreating the entire events list on every change is not only
wasteful, it also breaks the clear functionality as messages scheduled for
removal are replaced with "new" messages after the first message has been
removed.
Address both issues by keeping track of all messages and re-use them
whenever possible.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/325
And stop using FocusCaretTracker for caret position purposes. This
new object uses 1) the text-input protocol in wayland and 2) Info
from IBusPanelService for X11 (which is meant to work for XIM too).
This drops the usage of AtspiEventListener for OSK purposes, which
is best to avoid.
If a clone gets destroyed before the corresponding MetaWindow is
removed from the workspace, we will still find it in the list of
clones and try to destroy it again. Avoid the resulting warnings
by updating the list of clones immediately when a clone is destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
If a clone gets destroyed before the corresponding MetaWindow is
removed from the workspace, we will still find it in the list of
clones and try to destroy it again. Avoid the resulting warnings
by updating the list of clones immediately when a clone is destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
Remove any usage of MetaScreen, as it has been removed from libmutter
in the API version 3. The corresponding functionality has been moved
into three different places: MetaDisplay, MetaX11Display (for X11
specific functionality) and MetaWorkspaceManager.
https://bugzilla.gnome.org/show_bug.cgi?id=759538
This may be the case where keyboardIndex is -1, which may be the
case where either the keyboard monitor hasn't been set yet, or
the keyboard is being unmanaged and meta_window_get_monitor
returns -1
https://bugzilla.gnome.org/show_bug.cgi?id=788882
When middle-clicking an app icon on the Dash, it will always try to open
a new window of that app, even if the app doesn't support multiple
windows. Meanwhile, Ctrl+click on an app will only open a new window if
the app allows it.
This change prevents middle-clicks on app icons from opening new windows
for apps without multi-window support.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/316
When the actor that has the key focus is destroyed, Clutter moves
the focus to the stage. In case the destroyed actor was inside a
ModalDialog, this breaks any keyboard interaction: keynav is broken
because the stage isn't in any focus chain, and access keys like
Escape because they are handled on the dialog's parent.
The only dialog that may destroy a child without recreating the dialog
buttons (and thus moving the key focus there) is the WirelessDialog,
fix it by keeping the key focus within the dialog when removing networks
from the list.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/76
Just like we did for the window list in app icons' context menu,
provide a fallback for window captions in the window picker rather
than showing blank items to the user.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/26
The app icon's context menu contains a list of open windows,
identified by their title. As we currently don't handle the
case where the app didn't set a title, we end up with empty
menu items which looks clearly broken. Fall back to the app's
name in that case.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/26
The close dialog for non-responding windows is closed automatically
when we detect that the window is responding again. However as we
currently only ping the window in response to certain user actions
(like focusing the window or opening the window menu), this can
easily go undetected.
Address this by periodically pinging the window while the close
dialog is shown.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/298
The dialog won't be visible when unredirection is in place (for example
while a fullscreen window is focused), so disable unredirection while
the dialog is up.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/298
Similar to what it's done when the main connection changes, we need
to make sure that the icon in the panel gets updated before calling
_syncConnectivity(), so that the icon gets always updated if needed,
regardless of whether there's an active connection or not.
This is needed because there's at least one case when an icon should
be shown when the computer is not connected to any network: when a
hotspot has been enabled, which can be useful even if there's not
an internet connection to share (e.g. to easily allow connecting
other devices to the computer.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/214
While the libnm-glib version of the function returns a GByteArray*
that gjs can directly cast to the required gutf8*, the libnm function
returns GBytes* from which we need to explicitly fetch the data.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/136
commit 642107a2 attempts to avoid resetting the current keymap on
spurious input source changes.
It does this by checking if the current layout id is found in
the new list of layouts and resetting the current layout to the
associated match in the list. By not nullifying the current
layout, it won't get subsequently reset.
Unfortunately, if the order of the list changes, resetting the
current keymap is still necessary, since the order corresponds
with the index of the activated group.
This commit changes the code to nullify the current layout if
its group index changes.
https://bugzilla.redhat.com/show_bug.cgi?id=1573923
The IM can pretty much update the input sources anytime (even if
to set the same ones). That ends up triggering rebuilding all user
defined keymaps, and losing modifier state if we are unfortunate
enough that this caught us while pressing one.
One common situation seems to be password entries, resulting in
the wrong character being printed if the first character happens
to require the shift key.
If the current keymap is not found in the newly loaded list,
this._current will end up null, with the same behavior as we get
currently (immediate keymap reload).
https://bugzilla.redhat.com/show_bug.cgi?id=1569211https://gitlab.gnome.org/GNOME/gnome-shell/issues/240Closes: #240
Commit f285f2c6 changed Scripting.createTestWindow() to accept a parameter
object instead of a parameter list but forgot to remove the width and height
arguments. This breaks the "core" test as all windows are created with default
settings.
We use the close() method to disconnect signal handlers set up in
init(), however the handler ID is only valid in the first call in
case the method is called more than once.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/221
If we get an error during device enrollment, the message might be
prefixed to indicate that the error came from the remote peer. We
are presenting that message to the user so strip that prefix away
if it was there.
The devices emitted (device, error) while the connected handler
was expecting (error, device). The former is more consistent
with the rest of the code (so change it to device, error).
The _blockTimedLoginUntilIdle method sets a timeout to be called after
the user is idle for 5 seconds. That timeout is erroneously given the
source name "[gnome-shell] this._timedLoginAnimationTime" which looks
like a copy-and-paste mistake. The original intention was probably to
use a source name of "[gnome-shell] this._timedLoginIdleTimeOutId" which
more closely matches existing convention for source names.
This commit fixes that.
Make sure the focus isn't grabbed right after user interaction starts a
new timed login. Only grab it after the idle timeout is done and on the
first run instead.
Normally, we give the user a 5 second grace period of inactivity before
starting a timed login operation. Unfortunately, that grace period
timeout isn't properly removed if the timed login operation is restarted
during the grace period. That means the timeout handler can
inadvertently get called multiple times leading to the grace period
duration getting subtracted from the total animation time more than
once.
This commit ensures we only ever have one grace period timeout scheduled
at a time.
The timed login feature currently cancels the timed login operation when
a user presses a key but, oddly, only hides the indicator when the user
releases the key. This means that if a user holds down a key that
doesn't key repeat, the timed login indicator will continue to run after
the timed login operation is cancelled.
This commit address the problem by ensuring the timed login indicator is
hidden on any key press event, at the same time the timed login
operation is canceled.
Modes, extensions and other GNOME Shell assets are searched in appropriate
subdirectories of each directory in XDG_DATA_DIRS, falling back
to global.datadir.
However, this isn't the case for themes, which are currently always expected
in global.datadir, even when referenced by a mode in a different XDG_DATA_DIR.
The fix is to have the theme finding pattern follow the same logic as other
elements.
Fixes#167.
The HIG discourages the use of icons in menus except for "noun" items
(files, bookmarks, ...). While those should be rarely used in the
application menu, it still makes sense to support them in the few
cases where they are used.
https://bugzilla.gnome.org/show_bug.cgi?id=760985
Otherwise it happens that porthole is computed again after that the
overlay is hidden (triggered by a layout reallocation) and thus not
regenerated again afterwards.
https://bugzilla.gnome.org/show_bug.cgi?id=792687
The author of the original URL-matching regex warns[0] that the pattern may
cause certain regex engines to lock up with certain input, namely patterns
that contain parentheses. It turns out SpiderMonkey is affected, but rather
than switching to the author's improved version (that is still crazy), sim-
plify the pattern a bit by removing support for nested parentheses in URLs.
Even a single pair of parentheses is extremely rare, so this is unlikely to
make a noticeable difference (other than not locking up SpiderMonkey of
course) ...
[0] http://daringfireball.net/2010/07/improved_regex_for_matching_urls
Since commit 78a92fb6be we no longer pop up authentication dialogs
on the lock screen, however any dialog that is already open at that
time remains open. This is unexpected, so hide the dialog until
the screen is unlocked again.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/166
