We are currently taking "old" placeholders that are still animating
out into account to calculate the new placeholder position - this
causes an annoying bug, where dragging a dash item downwards triggers
quick continous position changes of the placeholder.
Just ignoring old placeholders fixes the issue.
https://bugzilla.gnome.org/show_bug.cgi?id=651842
Some modifiers like NumLock or ScrollLock don't make sense in
keybindings, which is why we ignore them in mutter when matching
events to keybindings; for keybindings in the overview, we do
the matching ourselves, so filter the same modifiers as mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=665215
The hide animation causes hover notifications for the actors inside the
boxpointer. PopupBaseMenuItems, in particular, grab the keyboard focus on
hover notifications to enable keyboard navigation on menus. This, in turn,
breaks modal dialogs' keyboard navigation since key focus is taken away from a
just created dialog when the menu is hiding.
Since input events aren't useful while menus are animating we just prevent
them from propagating.
https://bugzilla.gnome.org/show_bug.cgi?id=662493
Checking if _buttonLayout contains _initialKeyFocus always fails since we
destroy all children before. Instead, use a signal handler id when explicitly
setting the initial key focus which is zeroed if/when the actor is destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=663437
The dynamic-workspaces key was introduced to allow us to opt out of
writing the num-workspaces setting (which is ignored with the dynamic
workspace management anyway), but there'll be some expectations that
the setting will have an effect on the UI.
It's actually not very hard to support, so here's to the graybeards ...
https://bugzilla.gnome.org/show_bug.cgi?id=671568
With the recent keynav changes, the keyboard focus can now move
away from the search entry while a search is active. While we
keep the focus entry style while a search is active, we set the
cursor visibility depending on whether the entry has focus. This
doesn't seem very logical, so always request to show the cursor
when we appear focused.
Note that at least for now we are just expressing intent, as clutter
never draws the cursor for unfocused entries.
When canceling a search pressing Escape while the focus is on the
search entry we clear the entry, set its text to the hint and go back
to the previously selected tab. Make this the behavior also for when
the focus is on search results and not on the entry itself.
https://bugzilla.gnome.org/show_bug.cgi?id=663901
Running apps are always kept in the dash, so removing them from
favorites just moves them to the end of the favorites list. This
behavior is not immediately obvious, so only show the remove target
when dragging a favorites application that is not currently running.
https://bugzilla.gnome.org/show_bug.cgi?id=644853
Saving the status to GSettings is pointless if it did not actually
change. If done during login, it is actually harmful, as it causes
dconf-service to be started.
https://bugzilla.gnome.org/show_bug.cgi?id=668214
When restoring the previous sesssion presence, we forcefully set
gnome-session's status. In the case of IDLE, this will trigger the
screensaver, which is clearly unwanted first thing after login. We
should only save and restore statuses that are explicitly set by the
user anyway, so limit presence saving to AVAILABLE and BUSY statuses.
https://bugzilla.gnome.org/show_bug.cgi?id=665701
Previously, PanelMenuButton would only set max width if the user
explicitly clicked the menu button, resulting in submenus without scrollbars
if opened via keyboard navigation or mouse over.
https://bugzilla.gnome.org/show_bug.cgi?id=658946
loadExtension() fails if the extension object is already created,
but the installation dialog was creating a dummy object in the
downloading state. Since nothing requires that (and the object is
not in the correct format anyway), just kill it.
https://bugzilla.gnome.org/show_bug.cgi?id=671134
This hack was part of the custom scroll view code that allowed for
proper scrolling when the actor was near the screen edges. Since
the port to St.ScrollView, it's unnecessary and downright wrong,
causing portions of actors to be clipped. Remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=613194
If a widget isn't focusable or none of its children are focusable, then
navigate_focus will return false and the key focus won't be set. We
need to explicitly grab the key focus in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=671001
* Add a keyring prompter based on GcrSystemPrompter
* Adds dependency on gcr version 3.3.5 or higher
* Not yet using unmerged support for non-pageable memory
https://bugzilla.gnome.org/show_bug.cgi?id=652459
The preferred way to unmaximize/untile a window is by using a drag
gesture. Extend the available area to start this gesture into
non-reactive parts of the top bar above the window - with that we
take advantage of the "infinite height" of the screen edge, and the
extra space is particularly useful when the window has its titlebar
hidden.
https://bugzilla.gnome.org/show_bug.cgi?id=666359
We were supposed to be updating the notification's title when the
window title changes, but we didn't actually bother to re-format
the title and body, effectively leaving the notification unchanged.
For modal dialogs without buttons, the button group still contributes
padding/spacing. To fix that, hide it by default and only show it
when actually adding buttons.
https://bugzilla.gnome.org/show_bug.cgi?id=668209
The appSwitcher has been using a custom scrolling implementation because
St.ScrollView was buggy when it was written. The bugs have been fixed
so remove the custom implementation and move to St.ScrollView.
https://bugzilla.gnome.org/show_bug.cgi?id=613194
The old formula worked only when the primary monitor was positioned at the
top of the virtual desktop. When that was not the case, the available
space was miscalculated sometimes resulting in negative numbers, which in
the end produced strangely vertically stretched window thumbnails.
https://bugzilla.gnome.org/show_bug.cgi?id=651130
Although not all "Finding and reminding" applications are ready
yet, the integration with gnome-documents' search results overlaps
enough with the "Recent Items" provider to justify its removal.
https://bugzilla.gnome.org/show_bug.cgi?id=670150
Allow applications to register search providers by dropping a keyfile
into a well-known directory. For now, initialize all found providers;
long term, we probably want to give users the ability to restrict the
set of active search providers.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
Add an asynchronous search provider for results from a DBus service
implementing the org.gnome.Shell.SearchProvider interface; this
will allow applications to hook into the Shell's search without
implementing it in Shell itself or requiring an extension.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
We will allow applications to hook into shell's search by registering
a service which implements a well-known DBus interface.
"search-providers" is a reasonable directory name for applications to
drop their registration files, but it conflicts with "search_providers"
used by open search providers - rename the latter to avoid confusion.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
Currently, asynchronous search providers are expected to call
startAsync() in getInitialResultSet()/getSubsearchResultSet(),
which will trigger async mode until the search is canceled or
updated. Switching between synchronous and asynchronous mode like
this makes asynchronous search an implementation detail, but being
transparent to the searchDisplay means that certain optimizations
don't work as expected. Namely, updating asynchronous search results
causes flickering, and the automatic selection never focuses
asynchronous results.
So change the API to require providers being either synchronous (with
the current getInitialResultSet()/getSubsearchResultSet() methods)
or asynchronous (with asynchronous variants), and handle asynchronous
providers explicitly in searchDisplay.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
renderResults() updates the results set, determines the number of
results to display, retrieves the corresponding result metas and
adds a new results actor for each meta.
Splitting the function in those parts allows to move the retrieval
of the result metas into SearchResults, which is where we ensure
flicker-free rendering and control the selection - we want to keep
both features for asynchronous result metas which we are about to
introduce.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
Empathy uses to support 2 D-Bus API for calls:
- StreamedMedia: legacy API
- Call.DRAFT: experimental version of the new API
Since 3.3.90, Empathy only supports Call1, the first stable version of the new
API, so the Shell should do the same.
https://bugzilla.gnome.org/show_bug.cgi?id=667694
Add a new dbus method that takes an area (x, y, width, height) and fires a
flashspot on it.
This would be useful for applications like totem and cheese.
https://bugzilla.gnome.org/show_bug.cgi?id=669660
An actor is removed from its parent after it emits the destroy signal,
so we can't just check if the notification stack has more than one
notification -- we need to check if there's a notification there
that is not the current one.
This was causing spew in the form of:
"this.notificationStack.get_children()[0]._delegate.setIconVisible
is not a function"
IconGrid items used to be square, so a single size value made
perfect sense. However, as contact search uses rectangular items,
using a single size is wrong - the allocated height ends up twice
the size of the visible height, which is particularly visible if
another provider displays results below contact results.
https://bugzilla.gnome.org/show_bug.cgi?id=670148
The correct way to make an actor having the same size as another is
a ClutterBindConstraint. Connecting to 'allocation-changed' fails because
the allocation might not change even when 'width' and 'height' properties do.
This is the case of Main.uiGroup, used as parent container for zoomed
window clones.
In lightbox.js we bind also the position because in principle it could change,
even if currently only fullscreen lightboxes are used.
VPN secrets are stored by the plugins, that provide separate
helpers for authentication. This commit adds the support for invoking
the binaries and pass them connection details.
For plugins that support it (as exposed by their keyfile), we invoke
them in "external-ui-mode" and expect a set of metadata about the
secrets which is used to build a shell styled dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=658484
Substitutions generated by configure don't resolve prefixes, so
cannot be used for paths. Config already had localedir, and next
commit will need libexecdir and sysconfdir, so just bite the bullet
and move to sed.
https://bugzilla.gnome.org/show_bug.cgi?id=658484
ConsoleKit is being obsoleted by systemd. Accordingly port the CK logic
in the gnome-shell automount manager to systemd-logind APIs.
This makes use of systemd-logind's native C APIs which are much easier
to use than the D-Bus APIs in this case, and much faster too (since they
are synchronous and directly query the kernel for the information we
need). The dependency is compile time optional, and in order to be nice
to the Debian folks g-s compiled with this enabled fill automatically
fall back to CK support on systems lacking systemd.
ConsoleKit is obsoleted by systemd-logind. Accordingly, port
the current CK code to systemd. In order to be nice to
the Debian people fall back to CK if systemd is not found,
so that the code makes the best of whatever it runs on.
Gsm.GetRegistrationInfo and Cdma.GetServingSystem return a single argument
consisting of a tuple, not three separate arguments. This is
a regression from the GDBus port.
https://bugzilla.gnome.org/show_bug.cgi?id=670005
Currently they return 'undefined' instead of something meaningful,
e.g. DND.DragMotionResult.CONTINUE. This was unnoticed because none
of the ancestors of the Activities button actors do any drag handling.
The only visible issue are JS errors generated when dragging, for example,
a window thumbnail over the button, because the cursor cannot be set.
https://bugzilla.gnome.org/show_bug.cgi?id=669921
Since the dummy actor occupies exactly the same area of the Hot Corner,
it can be erroneously picked during xdnd operations. Fix this by
hiding it from pick.
https://bugzilla.gnome.org/show_bug.cgi?id=669831
If both spacing and -shell-grid-item-size are 0, as they would be with nothing
setting them, we enter an infinite loop where we try to compute the layout.
Avoid the situation entirely by defaulting -shell-grid-item-size to a sane
value instead of 0.
https://bugzilla.gnome.org/show_bug.cgi?id=662747
The "extension" object is what I previously called the "helper" object.
It contains the extension importer object as well as the metadata object.
Things that were previously added on to the metadata (state, path, dir, etc.)
are now part of this new "extension" object.
With the new importer changes brought on by the extension prefs tool,
extensions are left without a way to import submodules at the global scope,
which would make them rely on techniques like:
var MySubModule;
function init(meta) {
MySubModule = meta.importer.mySubModule;
}
That is, there's now a lot more meaningless boilerplate that nobody wants
to write and nobody wants to reivew.
Let's solve this with a few clever hacks.
Allow extensions to get their current extension object with:
let extension = imports.misc.extensionUtils.getCurrentExtension();
As such, extensions can now get their own extension object before the
'init' method is called, so they can import submodules or do other things
at the module scope:
const MySubModule = extension.imports.mySubModule;
const dataPath = GLib.build_filenamev([extension.path, 'awesome-data.json']);
https://bugzilla.gnome.org/show_bug.cgi?id=668429
Add two new APIs, "launchExtensionPrefs" to let SweetTooth let the user
launch the extension preferences tool directly from the browser. To allow
SweetTooth to check if an extension can be configured, add a new key to
the 'metadata', 'hasPrefs', which is returned by the GetExtensionInfo/
ListExtensions DBus methods.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
A new tool, 'gnome-shell-extension-prefs' can load a new entry point from
extensions, 'prefs.js', which has an entry point to return a GTK+ widget.
This allows extensions to have their own preferences dialog, without each
extension needing to ship its own Python script and .desktop file.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
ExtensionUtils is a new module that has a lot of miscellaneous things related
to loading extensions and the extension system put into a place that does not
depend on Shell or St.
Note that this will break extensions that have with multiple files by replacing
the old uuid-based importer with an object directly on the meta object.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
If an extension fails to import, we will pass the error object
to logExtensionError, which fails to pass it onto DBus as an
error object is not a string. To fix, convert the error object
to a string before passing it to logExtensionError.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
When the session status changes to IDLE, we automatically adjust
the IM presence; however, we should treat HIDDEN the same as OFFLINE
and not change the presence.
https://bugzilla.gnome.org/show_bug.cgi?id=642408
Since the port to GDBus, sessionActive is only set on DBus name
owner changes; this means that it may end up not being initialized
at all, and therefore always evaluate to false.
Make sure that the property is always initialized on startup.
https://bugzilla.gnome.org/show_bug.cgi?id=668020
gnome-settings-daemon commit 07b1ed63016 removed the custom 'Changed'
DBus signal in favor of the standard 'PropertiesChanged' signal, so
use that instead to update the icon.
https://bugzilla.gnome.org/show_bug.cgi?id=667371
When the last window on a workspace is closed the focus goes to some other
window in another workspace which would cause us to show the AppMenuButton for
an application that isn't visible on the current empty workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=643867
Currently it is not possible to trigger the context menu while the
summary notification is opened (and vice versa). To actually trigger
the desired item, the user has to click again, which is annoying
without a good justification, so allow switching directly between
left/right click items.
https://bugzilla.gnome.org/show_bug.cgi?id=666197
Currently we display IM status information for every contact, falling
back to "offline" if the contact does not have an associated IM
account. Instead, don't show IM presence in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=662685
this.parent was ported from calling the parent class's method like
MessageTray.Notification.prototype._init.call(this, ...);. When
porting to Lang.Class, the 'this' parameter is now passed automatically, but
removing it was forgot in a few places. Fix these places.
https://bugzilla.gnome.org/show_bug.cgi?id=665017
We consider spacing and padding in _adjustIconSize, but as we use
the theme node from an actor which is not exposed to the CSS, we
miss the "real" values - correct this.
https://bugzilla.gnome.org/show_bug.cgi?id=662213
Clear the ClutterClickAction state before starting the drag,
otherwise it will eat the first button event after the drag,
preventing a new drag from being started.
https://bugzilla.gnome.org/show_bug.cgi?id=662386
Writting the screenshot to a file can take a relativly long time
in which we block the compositor, so do that part in a separate
thread to avoid the hang.
https://bugzilla.gnome.org/show_bug.cgi?id=652952
DashItem labels have initial delay before showing up, but once the
first label in the dash is visible (meaning the user is very likely
exploring things) and the pointer is moved along the dash, the label
will follow immediately.
https://bugzilla.gnome.org/show_bug.cgi?id=666170
Signed-off-by: Seif Lotfy <seif.lotfy@collabora.co.uk>
- We should only call workspaceRemoved() for workspaces that are
are actually being removed.
- When we have multiple monitors, a window on a secondary monitor is
on all workspaces, so it ends up in all workspaces _allWindows
lists, so we can't use previous presence in that list to determine
whether we need to go ahead and add the actor; allWindows is simply
the list of windows where we are listening to notify::minimized.
https://bugzilla.gnome.org/show_bug.cgi?id=667652
Since the application proxy is created asynchronously, at the time
the GActionGroup (GActionMuxer) is created, there is no GDBusMenu yet.
Defer creating the menu in that case.
Also, clear out signal handlers if have no target application.
https://bugzilla.gnome.org/show_bug.cgi?id=633028
We add a drag monitor to check whether the pointer is inside
the workspace selector, and update the visibility of the drop
placeholder consequently.
https://bugzilla.gnome.org/show_bug.cgi?id=664201
According to the GIO docs, sections can have labels too. We support
them by inserting a non reactive menu item at the beginning of the
section. This item is specially flagged to be ignored while processing
changed signals from the model (since it does not correspond to any
model item)
https://bugzilla.gnome.org/show_bug.cgi?id=666681
If there's a single small window (e.g. empathy chat) in the overview, it
looks usable, because it's as big as outside of the overview, but when
you start to type, overview search is launched, which is confusing.
Fix that by setting maximum scale for window clones to 0.7
https://bugzilla.gnome.org/show_bug.cgi?id=646704
In overview when closing a window and afterwards dragging a window it can
happen that you pick a wrong window or no window if windows' positions is
updated while initiating the drag.
Fix that by delaying window rearrangement when cursor is over a window.
https://bugzilla.gnome.org/show_bug.cgi?id=645325
DND code assumes it can query the size of the actor before parenting,
while StWidget asserts that get_preferred_size() is only called
after the actor is on stage. This fixes a crash while dragging
"Connect to..."
https://bugzilla.gnome.org/show_bug.cgi?id=633028
With GJS' GDBus implementation, we get the invocation paramters as an
array if we declare a method as async.
This is bad and not consistent with what GJS does for synchronous
methods, but it's the way it is, and other classes in gnome-shell
implement this correctly by exploding the array into its components in
the method implementation, but not the screenshot methods.
Also, we're supposed to return a value using the provided invocation
object, not with a callback now, so do that.
https://bugzilla.gnome.org/show_bug.cgi?id=667662
Commit 25948f214e replaced the old hardcoded scaling behavior of
background-images with the CSS-compliant option to control that
behavior with the background-size property. Fix some fallout from
the changed default scaling behavior.
That way different system notifications, such as the ones about battery power
and the ones about software updates, are shown with separate message tray
sources.
https://bugzilla.gnome.org/show_bug.cgi?id=664138
After an item is destroyed, all its signals were disconnected,
except for 'destroy' itself. This could lead to exceptions, if
destroy was called more than once on the item.
https://bugzilla.gnome.org/show_bug.cgi?id=665680
Instead of using an St.Tooltip to show the app's name under the icon,
manually position a new St.Label ourselves. Make sure to keep the label
hidden when right-clicking so it doesn't get in the way of the popup menu.
Only one tooltip/label will be displayed at a time.
https://bugzilla.gnome.org/show_bug.cgi?id=666166
GTK+ also exports window-specific actions, by putting the object path
for the exported action group in the _DBUS_OBJECT_PATH X property.
We add this action group to the app's muxer with a 'win' prefix,
since that is what the exported menu expects. Whenever the focus
window changes, we update the window-specific actions of its
application, and emit notify::action-group to cause the app
menu to be updated.
GDBusActionGroup api has changed again, adapt to that.
Also, use a GActionMuxer to add the 'app.' prefix to actions,
instead of manually stripping it out of the action names.
In the future, the muxer will also contain per-window actions
with a 'win.' prefix.
By the time the window is first mapped and the app menu button is
synced, we may not have finished reading the menu. In that case,
connect to notify::menu and update accordingly.
Use the new GApplication support in ShellApp to create the application
menu. Supports plain (no state), boolean and double actions.
Includes a test application (as no other application uses GApplication
for actions)
https://bugzilla.gnome.org/show_bug.cgi?id=621203
The loop can exit with an interval of length one or one of
length zero. In the first case it is correct to check which side
of the interval to return, in the second case no comparison should
be made (since there is only one possible value).
In practice, this usually results in one comparison more than needed,
but in some cases (when the position was past the end of the array),
would call the comparator with undefined.
https://bugzilla.gnome.org/show_bug.cgi?id=666614
When transitioning from gnome-panel to gnome-shell in 3.0 we
lost the ability to summon the wisdom of the mythical fish.
This patch restores this, for the few adepts that are aware of
the magical incantation.
(Not as configurable as the original one, but it's an easter egg
after all...)
https://bugzilla.gnome.org/show_bug.cgi?id=666606
Forcing the icon size will distort it unnecessarily, and will
in any case not work if showing an animation (which is a ClutterGroup).
Instead, set the size on the bin, and make it align its child
if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=666606
Previously the code in _accessPointAdded was iterating over the
the network list to find a good place, and at that time, added both
the network to the list and the item to the menu. When I refactored
to call queueCreateSection, I forgot to add code to insert the
network in the list.
Add it now, using the new Util.insertSorted function.
https://bugzilla.gnome.org/show_bug.cgi?id=666429
Adds two new functions, Util.lowerBound and Util.insertSorted,
that take an array, a value and a comparator, and find the
first position at which the value can be inserted without
violating the order, in optimal time.
https://bugzilla.gnome.org/show_bug.cgi?id=666429
By using Main.queueDeferredWork, we can ensure that most of the
menu contents (in particular, the heaviest parts like the list of
wifi networks) are not updated immediately as we receive signals
from NetworkManager. Instead, the menu is rebuilt some time later,
or as soon as the user opens the menu.
This means that it is no longer needed to optimize for the
access-point-added case, replacing a lot of buggy code with a safer
call to _queueCreateSection, which in turn should ensure that the
more menu, if existing, is always at the end and that at most 5 networks
are visible outside it.
https://bugzilla.gnome.org/show_bug.cgi?id=664124
We need to notify when the channel dispatcher calls HandleChannels on
us with a channel we already handle. However, we don't want to notify
if we claim a new incoming channel which doesn't actually have
anything interesting in it yet.
For example, a new channel pops up just to give a delivery
notification. We want (or, need) to handle it but don't want to notify
for it.
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=666243
Signed-off-by: Jonny Lamb <jonnylamb@gnome.org>
The window overlays may be shown erroneously if hideOverlays is
called while the corresponding clone has an uncompleted tween which
calls showOverlays in its onComplete handler, for instance when
quickly leaving the overview before the initial overview animation
has finished. To fix, remove all existing tweens when hiding the
overlays.
https://bugzilla.gnome.org/show_bug.cgi?id=666020
When in overview, window labels flicker or are temporarily hidden on a
number of occasions - when simply clicking around the area the windows
are displayed in, dragging a window, sliding in the workspace list,
adding new workspaces etc. This patch makes the label for any window
visible at any given moment when in overview and the said window is
not being dragged around.
https://bugzilla.gnome.org/show_bug.cgi?id=644861
When wifi or wwan are blocked by hardware killswitch, we should not
allow changing the switch (it won't work anyway), and show
"hardware disabled" instead, similar to what we already do in the
bluetooth menu.
https://bugzilla.gnome.org/show_bug.cgi?id=665194
When placing networks in _createSection, we were taking in
consideration that _activeNetwork is always first, by adding 1,
but then kept this offset also for networks following it (normally,
all of them, since _activeNetwork is also the most recently used),
that instead should not be affected by the movement.
This resulted in the menu showing 4 networks + More... instead of
5.
https://bugzilla.gnome.org/show_bug.cgi?id=664124
The three boxes for the ripple animation are visible when created. This
means that the drag and drop code that searches for an actor to handle
the drag can find the ripple boxes instead of the Activities button or
hot corner. The latter can handle drag and drop while the ripple boxes
can't.
This is only a problem if drag and drop is attempted before the ripple
animation has been played: the boxes are made invisible at the end of
the animation. The fix is to just create the boxes invisible.
Instead of leaving the tray covering the whole last pixel row when it's
hidden, hide it completely. This avoids mouse events not being delivered to
application windows on the last pixel row.
To summon the tray we use a single reactive pixel on the corner.
https://bugzilla.gnome.org/show_bug.cgi?id=663366
The dash handles 'window-drag-cancelled', to be able to do the
animations for drag snap-back and size changes in parallel. As
the signal is not emitted for previews in the workspace switcher,
it does not work in that case.
If workspaces-only-on-primary is false, swipe scrolling is now
broken with multiple monitors. To fix, let workspacesDisplay
handle swipe scrolling for all views.
https://bugzilla.gnome.org/show_bug.cgi?id=652580
If workspaces-only-on-primary is false, workspaces should be shown
on each monitor; rather than letting the existing workspaces span
the entire screen, manage one workspacesView per monitor (similar
to the extra workspaces in WorkspacesView when the setting is true).
https://bugzilla.gnome.org/show_bug.cgi?id=652580
Extra workspaces are special, in that they collect windows from
all workspaces for a particular monitor. This matches the default
behavior, but we need more than a single workspace per monitor if
workspaces-only-on-primary is false, so don't create the extra
workspaces in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=652580
WorkspacesDisplay was introduced to manage the workspace objects
and views; however, the overview still accesses the view held
by the workspacesDisplay directly, which is a bit odd.
Add some additional methods needed by the overview, and make the
view a private property.
https://bugzilla.gnome.org/show_bug.cgi?id=652580
When installing an extension at runtime, we accidentally swapped the 'type'
and 'enabled' parameters. While this doesn't directly affect anything right
now, as everything works coincidentally, future patches that look at the
'type' parameter to decide what to do would get the wrong answer.
The last patch in the sequence. Every place that was previously
setting prototype has been ported to Lang.Class, to make code more
concise and allow for better toString().
https://bugzilla.gnome.org/show_bug.cgi?id=664436
All classes that have at least one other derived class (and thus
benefit from the framework) have been now ported. These includes
NMDevice, SearchProvider, AltTab.SwitcherList, and some other
stuff around.
https://bugzilla.gnome.org/show_bug.cgi?id=664436
Third step in the class framework port, now it's the turn of
MessageTray.Source and MessageTray.Notification, as well as
the various implementations around the shell.
https://bugzilla.gnome.org/show_bug.cgi?id=664436
The Lang module in gjs has recently gained a small yet powerful
Class framework, that should help improve the readability of code
when using complex inheritance.
This commit starts porting shell code, by rewriting all classes in
popupMenu.js (and all derived classes) to Lang.Class.
https://bugzilla.gnome.org/show_bug.cgi?id=664436
No idea why connecting a key-press-event to a non-reactive actor
used to work, but some Clutter update broke it. Obvious fix is
to make the actor reactive.
https://bugzilla.gnome.org/show_bug.cgi?id=664582
We prefer to ask the user for his own password. If PolicyKit
is not configured to accept that, try the root password. If
PolicyKit does not accept that either, ask for password of
the first user that PolicyKit _will_ accept. The last case
is a bit broken, but should rarely occur in real-life
configurations.
https://bugzilla.gnome.org/show_bug.cgi?id=651547
If no telepathy accounts have been set up or enabled, the IM status
chooser won't have any effect. To avoid confusing behavior, make
the status selector insensitive in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=662800
ComboBoxMenuItems use ClutterClones to reconstruct the active item
in the associated ComboMenu, so pseudo class changes due to state
changes of the ComboBoxMenuItem don't have the intended effect
(since the actual style information is taken from the associated
ComboBoxMenu item).
As a fix, propagate relevant pseudo class changes to the active
ComboBoxMenu item.
https://bugzilla.gnome.org/show_bug.cgi?id=662799
ComboBoxMenuItems use ClutterClones to reconstruct the active item
in the associated ComboMenu to not impose a particular MenuItem type
in the menu. However, this results in style changes (for instance
those triggered by icon-theme or text-scaling-factor changes) of
the ComboBoxMenuItem not having a visual effect until the ComboBoxMenu
is shown.
As a fix, force a style update on the ComboBoxMenu when the item's
style changes.
https://bugzilla.gnome.org/show_bug.cgi?id=662799
The option was merge with 'visual-bell-type' with the GSettings
port, but the change turned out too disruptive for the universal
access menu / settings panel, so gsettings-desktop-schemas commit
a5819b2a4e9 re-added the separate option.
- replace some left-over references to GnomeSession.Presence.setStatus()
- the correct replacement for GnomeSession.Presence.getStatus()
is *not* GnomeSession.Presence.connectSignal('StatusChanged')
This continues the series of patches for GDBus porting, affecting
all code that accesses remote DBus objects. This includes modemManager,
automount, autorun (for the hotplug sniffer), calendar, network (for
nm-applet only), power, scripting (for perf monitor interface)
https://bugzilla.gnome.org/show_bug.cgi?id=648651
Port org.gnome.ScreenSaver and org.gnome.SessionManager glue code
to use GDBus, and move /org/gnome/Shell/EndSessionDialog to the
GDBus connection, so it is backed by the org.gnome.Shell name.
https://bugzilla.gnome.org/show_bug.cgi?id=648651
Rewrite code acquiring dbus names so that it uses GDBus, and rewrite
ShellDBus so that it is exposed on the GDBus connection. Ports of
the other objects will follow.
https://bugzilla.gnome.org/show_bug.cgi?id=648651
When changing _findNetwork with _findExistingNetwork, I changed
the return value to avoid searching twice for the access point,
and changed some names. I forgot to update all points where those
names were used.
https://bugzilla.gnome.org/show_bug.cgi?id=663278
Previously, we connected to notify::strength only if there was
already a signal connected, and the AP changed (thus, by induction,
we never connected). As a result, the icon became stale and different
from that shown inside the menu (which is correctly updated).
https://bugzilla.gnome.org/show_bug.cgi?id=650007
We must look for the actor under the pointer in the whole message tray and not
just in the notification. This will avoid us to capture focus when a
notification comes up with the pointer on the whole tray area.
https://bugzilla.gnome.org/show_bug.cgi?id=661358
Add "Mute"/"Unmute" option to the right click menu for chats to allow muting conversations
without blocking the sender or disabling all non-urgent notifications. Muting a conversation
prevents the pop up of notifications on new messages from the muted source, while these
messages are still available from the summary notification in the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=659962
SubMenuMenuItems close automatically with their parent, however
closing fails when the parent item is a MenuSection, as those
currently ignore any open()/close() requests.
At some minimal handling by emitting the 'open-state-changed' signal,
so children like SubMenuMenuItems work as expected.
https://bugzilla.gnome.org/show_bug.cgi?id=661029
PopupMenu.firstMenuItem returns a PopupMenuItem, not an apObj. We
need to retrive the latter using the _apObj property.
Also, somehow the property from the number of elements in a menu
was changed from .length to .numMenuItems, and this broke the
destruction of the menu upon emptying it.
https://bugzilla.gnome.org/show_bug.cgi?id=659277
Calling nm_access_point_get_ssid() in the handler of the
access-point-removed signal can result in DBus request, which will
then fail because the object was already removed at the server side.
Instead, use a difference function to retrieve the access point
object (the network), that compares directly by object identity.
https://bugzilla.gnome.org/show_bug.cgi?id=651378
Allow push_modal to optionally only work with a keyboard only grab and
use that in altTab as a fallback to allow switching windows while a pointer grab
is in effect (like during DND operations).
https://bugzilla.gnome.org/show_bug.cgi?id=660457
When two extensions monkey-patch the same area, enable() and disable() may
behave badly and completely wreck things. To solve this, when disabling
an extension, "rebase" the extension list so that monkey patches should be
added and removed in order.
https://bugzilla.gnome.org/show_bug.cgi?id=661815
Rather than loading and enabling all extensions at Shell init time, save some
time and gain some basic security by not loading extensions if they're
not enabled.
https://bugzilla.gnome.org/show_bug.cgi?id=661815
The GFileMonitor on ~/.gtk-bookmarks was block-scoped in the
PlacesManager._init() function, which caused it to be destroyed as soon
as the constructor was done. This caused changes in bookmarks to never
be notified to possible watchers (such as the places-menu extension).
To fix this, the 'monitor' variable has been promoted to an object
instance member.
https://bugzilla.gnome.org/show_bug.cgi?id=661921
When requesting a presence change, the actual presence set by
mission control does not necessarily match the requested presence
(if an active account does not support the requested presence),
which may result in the wrong presence being restored.
As a fix, be more cautious about saving status by assuming that
users do not request presence changes between an automatic presence
change request and the actual change.
https://bugzilla.gnome.org/show_bug.cgi?id=661485
Historically, when applications set "image-data" they expect it to show up
as an icon. So we display it as such if an icon is not specified with an
"app_icon" argument to Notify(). We also use "image-path" for an icon if
an icon is not specified.
We only display a large image specified with "image-data" or "image-path"
if an icon is also specified.
https://bugzilla.gnome.org/show_bug.cgi?id=659158
Users don't expect the bullets they just typed into an entry
field to disappear as soon as they hit enter.
Instead, they want the dialog to become insensitive during the
authentication process, so that it's clear that what they typed
in is being processed.
https://bugzilla.gnome.org/show_bug.cgi?id=657894
The message tray focus grabbing code sets the stage input
mode to Shell.StageInputMode.FOCUSED when the overview is
not visible. This ensures the stage window's input
region gets reshaped to include the notification chrome,
and so that input events get delivered appropriately to
the notification that grabbed focus.
The message tray code never tries to restore the stage input
mode later. Instead, the code relies on the stage input
mode (and input region) getting reset to
shell.StageInputMode.NORMAL automatically when focus moves
back from the shell chrome to a window in the user's session.
It's not really correct to set the stage input mode based
on the overview's visibility, though. At the login screen,
even though no overview is visible, the stage input mode is
Shell.StageInputMode.FULLSCREEN which is sufficient
for the notification's needs, Furthermore,
Shell.StageInputMode.FOCUSED is insufficient for the login
dialog's needs since the login dialog isn't considered
part of the shell's chrome and won't get included in the
stage input region.
This commit changes the message tray code to only set the
stage input mode if the current stage input mode isn't good enough,
rather than assuming the input mode isn't good enough just because
the overview is hidden.
https://bugzilla.gnome.org/show_bug.cgi?id=660919
Because we were sorting the Alt+Tab list by user_time rather than
stacking order / MRU, it was possible for the currently-focused window
to sometimes not be the first app in the list. Fix this by using
meta_display_get_tab_list() to get the proper MRU ordering of windows
on the current workspace, and then convert that to an ordered list of
apps.
https://bugzilla.gnome.org/show_bug.cgi?id=645026
In case _adjustIconSize() is called while the the dash icons are
animating, some extra work is required to yield the expected result.
Skip those extra steps when the icons are not actually animating.
https://bugzilla.gnome.org/show_bug.cgi?id=649248
The current code uses the dash's height and current icon size to
calculate the new icon size. However, the height does not correctly
relate to the icon size while the icons are animating, in which
case the resulting icon size may be wrong.
Rework the function to be independent from the actual icon sizes,
so that a correct size is calculated even when called during an
animation.
https://bugzilla.gnome.org/show_bug.cgi?id=649248
Rather than relying on the caller to hide the remove target and
removed items before calling _adjustIconSize(), move that logic
into _adjustIconSize() itself.
https://bugzilla.gnome.org/show_bug.cgi?id=649248
In case _adjustIconSize() is called while the the dash icons are
animating, some extra work is required to yield the expected result.
Skip those extra steps when the icons are not actually animating.
https://bugzilla.gnome.org/show_bug.cgi?id=649248
Rather than relying on the caller to hide the remove target and
removed items before calling _adjustIconSize(), move that logic
into _adjustIconSize() itself.
https://bugzilla.gnome.org/show_bug.cgi?id=649248
Use ShellEntry.addContextMenu() to add context menus to most
existing entries, with the exception of:
- the login dialog - it may act be used to enter either the
username (e.g. no password entry) or the
password, and copy/paste does not make sense
(nowhere to copy from, nowhere to paste to)
- notifications - while adding a context menu is useful here as
well, it will require changes to the tray's
focus grab handling, so leave those entries
out for now
https://bugzilla.gnome.org/show_bug.cgi?id=659275
Add addContextMenu() to support context menus on right-click/long-press.
Depending on the parameters passed, the context menu only contains
"Copy"/"Paste" actions or an additional "Show/Hide Text" toggle action
for password entries.
https://bugzilla.gnome.org/show_bug.cgi?id=659275
While the ability to show the password can be useful at times,
the existing implementation is problematic:
1) The use of a switch is wrong (as even noted in a code
comment).
2) It is inconsistent with any other password dialog (login screen,
polkit).
In lack of a properly designed solution (for all password dialogs),
the designers agreed to remove the switch for now.
https://bugzilla.gnome.org/show_bug.cgi?id=658948
The keyboard hides prematurely when the user is typing into
an empty search box because the click is a captured event that
triggers a loss of entry focus. By adding a keyboard check to
this event, the problem is solved.
https://bugzilla.gnome.org/show_bug.cgi?id=661340
Currently BoxPointer/Menus always point to the center of the
associated source actor. This is generally what we want, but
add some API to adjust that behavior for the cases where it
isn't.
https://bugzilla.gnome.org/show_bug.cgi?id=659274
Right now we show "(or swipe finger)" at the user login prompt
any time we detect a fingerprint reader.
Checking for the presense of a fingerprint reader isn't really
sufficient for knowing if it is appropriate or not to show the
message, though. Often, a user's fingerprint won't be enrolled
in the system even if the machine has a fingerprint reader.
In this scenario, we end up in a situation where the code will
fade out the message right after fading it in, or worse, fade
out the message while fading it in.
The former case looks flickery and bad, and the latter case
causes the login dialog to lock up since it never completes its
"show prompt" animation and we don't procede with the login
process until after that animation.
If a user is enrolled in the system, the fingerprint pam module
tries to tell the user to swipe their finger. We never show the
user that message because it's redundant with our own "(or swipe
finger)" message and because it uses techy words like "UPEK" and
"TouchStrip".
This commit changes the code to defer showing "(or swipe
finger)" until the fingerprint pam module forwards us its own
message. This makes it less likely we'll show the message when
fingerprint login won't work, and also removes the fingerprint
animation from the critical path "show prompt" animation.
https://bugzilla.gnome.org/show_bug.cgi?id=660492
Nvidia's twin view option does not align monitors properly, but with
a one pixel overlap. It looks safe to ignore an overlap this small
to make this case work.
https://bugzilla.gnome.org/show_bug.cgi?id=661387
js2-mode is no longer developed and we recommend js-mode these days,
so switch the modelines to specify that, and make them consistent
across all files.
https://bugzilla.gnome.org/show_bug.cgi?id=660358
Right-click menus in the dash can be dismissed by clicking anywhere
outside the menu. However, if a window clone is located beneath the
pointer when doing so, the window is activated and the overview
closed.
The cause of this unexpected behavior is that window previews are
activated on button-release, which is delivered to the preview after
the menu releases its grab on button-press. Use a ClutterClickAction
instead and let Clutter do the right thing, i.e. only trigger a
'clicked' signal when a button-release event is matched by a
corresponding button-press event.
https://bugzilla.gnome.org/show_bug.cgi?id=661151
tp-glib can sometimes emit a notify::alias signal when the alias doesn't
actually change. Bail out early instead of pushing an alias change message.
https://bugzilla.gnome.org/show_bug.cgi?id=660774
We now match individuals on other properties than alias, so take
this into account when representing a contact in search results
to avoid having them show up as "Unknown".
https://bugzilla.gnome.org/show_bug.cgi?id=660580
When workspace "previews" in the overview were just tiny gray
rectangles, it made sense to provide a way to move windows
directly between workspaces (by switching workspaces when dragging
a window to the corresponding screen edge). As the overview has
evolved however, the workspace switcher provides a good and
intuitive drop target already, so the alternative provided by the
screen edges is no longer necessary. As it also conflicts with
moving windows between monitors when using a vertical layout,
just remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=660838
The variable |type| doesn't exist here; what we want to do is using the
first member of the contentTypes array instead.
Probably a leftover of some refactoring of the code I did while working
on this.
This patch fixes starting of the default application for a given content
type if the control-center panel is set to run it when a device is
plugged.
https://bugzilla.gnome.org/show_bug.cgi?id=660821
A boxPointer should be able to be attached to any actor, not just ones on the
primary monitor. Assume that the sourceActor doesn't straddle monitors, and
constrain the boxPointer to the monitor the sourceActor is on.
https://bugzilla.gnome.org/show_bug.cgi?id=659861
Originally the keyboard was initialized in the user-session-specific
code, but it was later moved to the generic code. Except that it was
accidentally copied rather than moved.
https://bugzilla.gnome.org/show_bug.cgi?id=659940
Devices are represented as susdut, not susbut (i.e. the percentage
is a double rather than a boolean) - apparently the wrong signature
works, but correct it anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=660122
This ensures that this._clickedSummaryItem is always unset correctly.
Because we disconnect the signals that have _adjustSummaryBoxPointerPosition()
as a callback when unsetting this._clickedSummaryItem, we no longer call
setPosition() on this._summaryBoxPointer after it is hidden. Calling
setPosition() shows the box pointer again, which previously resulted in
an empty box pointer staying behind when a notification associated with
a tray icon was clicked.
https://bugzilla.gnome.org/show_bug.cgi?id=659862
Not doing so is considered as a bug as we don't accept the context right away.
It leads to tp-glib returning directly from the AddDispatchOperation() D-Bus
call and so automatically approve the channel if the Shell is the only
approver running.
https://bugzilla.gnome.org/show_bug.cgi?id=660084
This avoids unnecessarily removing and resetting the icon in the notifications.
This fixes the new chat notification sliding down and up slightly when new
messages are received.
https://bugzilla.gnome.org/show_bug.cgi?id=659768
Previously, when the avatar changed, we would not update the summary icon
for the source at all and would only update the notification icon when the
next message was received. Instead, we should update both immediately upon
recieving the signal that the avatar has changed.
https://bugzilla.gnome.org/show_bug.cgi?id=659768
This code was never tested very well, and has several problems
currently (windows creeping down and to the right, windows snapping to
a different location after you move them). To be fixed in 3.4.
https://bugzilla.gnome.org/show_bug.cgi?id=659643
Clutter 1.4 had a bug where it would wrap when it wasn't supposed to, and we
were unknowingly relying on it. Explicitly pass the available width/height
to get a perfect allocation.
https://bugzilla.gnome.org/show_bug.cgi?id=659633
While we allow for arbitrary modifiers in keybindings, both the
alt-tab and ctrl-alt-tab popups close when ALT is not present in
the modifier mask, resulting in ALT being de-facto hardcoded.
Instead, pass the actual modifier mask when invoking the popups.
https://bugzilla.gnome.org/show_bug.cgi?id=645200
Applying the "dim window" effect to the MetaWindowActor has two avantages:
first it avoids triggering bugs where ClutterOffscreenEffect doesn't handle
clone paint correctly. Second, it avoids showing the window as dimmed in
alt-Tab and the overview, which is weird.
The small downside of this is that the shadow becomes slightly gray when
the window dimmed, which is wrong - if we switched from blending with gray
to a combination of desaturation and darkening, this problem wouldn't
happen.
Revert out the addition of startY to the shader, since we don't need it
and fix the application of alpha, since we need to handle alpha correctly
for the shadow.
https://bugzilla.gnome.org/show_bug.cgi?id=659634
When the active AP disappears, it is possible to receive the
"access-point-removed" signal before the "notify::active-ap" (as
dbus-glib + libnm-glib property notifications are not reliable).
In that case, we would remove the AP from the network object, thus
an attempt to update the UI would create an item for an empty
network.
https://bugzilla.gnome.org/show_bug.cgi?id=658150
Current code is sometime attempting to create menu items for wifi
networks that have no visible AP. I have no idea why this is
happening, but it should fix the symptoms and avoid exceptions.
https://bugzilla.gnome.org/show_bug.cgi?id=658150
The previous wrapping code hardcoded a width in pixels, making it
non-text-zoom-friendly. Specify a CSS width in pts, and fix the
userMenu code to completely opt out of the popupMenu column behavior.
Hack PopupComboBoxMenuItem slightly to deal with the fact that the
pop-up no longer gets setColumnWidth'ed.
https://bugzilla.gnome.org/show_bug.cgi?id=652837
The keyboard status item doesn't derive from SystemStatusButton, since
it doesn't use an icon. But this meant it wasn't getting the right
class name, and so was using the full-width menu title highlight
rather than the small one. Fix that.
Currently entries' 'activate' signal is ignored, so hitting enter
does not have any effect, even if all required information has been
entered.
Instead, connect to the 'activate' signal so that hitting enter
behaves as if the "OK" button had been pressed.
https://bugzilla.gnome.org/show_bug.cgi?id=659133
Currently network dialogs don't focus password entries, which means
that rather than entering their password directly, users first have
to click the entry (or tab around the dialog).
Instead, put keyboard focus on the first entry that requires user
input.
https://bugzilla.gnome.org/show_bug.cgi?id=659133
As dialog buttons used to "steal" the initial key focus, the polkit
dialog delayed focusing the password entry. With buttons no longer
overwriting the manually set focus, this is no longer necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=659133
ModalDialog provides a method to set the initial focus. However,
when adding buttons, the initial focus is always set to the last
button, thus overwriting a previously set manual focus.
Instead, only set the initial key focus if setInitialKeyFocus()
has not been called manually before.
https://bugzilla.gnome.org/show_bug.cgi?id=659133
A menu action may not make sense at any time, so add API to mark
an item insensitive to indicate that its action is currently
unavailable, but may become activatable at a later point.
https://bugzilla.gnome.org/show_bug.cgi?id=659270
Without this, the dim "fade" will start at the top of the untrimmed actor. With
a large enough draggable_border_width setting, this will show no fade at all.
https://bugzilla.gnome.org/show_bug.cgi?id=659302
The way the window dimmer shader is applied will cause rendering errors with
the rounded corners, invisible borders or shaped textures since it doesn't deal
well with the multitexturing used by the MetaShapedTexture. Use an off-screen
buffer to flatten the texture before being applied.
https://bugzilla.gnome.org/show_bug.cgi?id=659302
We don't want the tray bar to open/close quickly when adding a chat because
it happens when user opens the chat from Empathy. The notification will
popup on incoming message anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=657249
In a normal user session you can't have more than one
popup, because the popup is modal and we don't allow
the popup to show up when there are other modals.
In a GDM session, however, the login dialog is modal, and
we want a popup, so we don't have that same check.
This commit changes the ctrlAltTab manager code to not
allow multiple popups.
https://bugzilla.gnome.org/show_bug.cgi?id=659177
Users depend on being able to switch focus between the panel
and the login screen using ctrl-alt-tab.
Because the login screen has no overview, we were short circuiting
some code that needs to get run to support ctrl-alt-tab.
This commit changes the short-circuit code to only run for user
sessions.
https://bugzilla.gnome.org/show_bug.cgi?id=659177
This commit adds the ability to log in with a fingerprint instead
of a password (assuming the user is enrolled and fingerprint
isn't disabled via gsettings)
https://bugzilla.gnome.org/show_bug.cgi?id=657823
If there's no scrollbar in the user list it grows as the
user arrows around. This is because it wasn't taking
padding into account when computing its destination size.
https://bugzilla.gnome.org/show_bug.cgi?id=658469
Making users have to log in to power off the machine isn't a good idea.
This commit adds a power menu similar to the one in the fallback greeter
which offers 3 items:
- Suspend
- Restart
- Power off
https://bugzilla.gnome.org/show_bug.cgi?id=657822
While the current behavior of setting the IM status to "busy" while
notifications are disabled makes sense, as incoming messages are
very likely to be missed, it is not immediately obvious.
Display a transient notification to explain the behavior to the user.
https://bugzilla.gnome.org/show_bug.cgi?id=652718
Simplify the layout in rightBox by getting rid of statusBox, and just
putting everything into rightBox directly.
Simplify the handling of the user menu by adding it like it was a
status icon rather than special-casing it. Rename the "tray_icon"
variables to "status_area" to reflect this better.
https://bugzilla.gnome.org/show_bug.cgi?id=651299
Legacy trayicons are mostly gone, so remove some of the special-casing
for them to simplify things.
Also, fix panel.addToStatusArea() to interpret its "position" relative
to tray_icon_order, not relative to the existing contents of
statusBox, so that the order that extension icons appear in does not
depend on the order they are loaded in.
https://bugzilla.gnome.org/show_bug.cgi?id=651299
The underline highlights on the panel menu items normally have a 100ms
transition between highlighted and unhighlighted, but the panel corner
graphics can't do that, so we hacked the Activities button and user
menu to have no transition. But in gdm mode, the user menu isn't the
rightmost item any more. Fix this by modifying the CSS from the code
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=651299
It does not make a great amount of sense to have this function
on the login screen. And worse, it does not work, since the greeter
is currently a modal dialog, so interaction with the opening
window is impossible.
https://bugzilla.gnome.org/show_bug.cgi?id=659164
The style of the top bar's corners is bound to the style of the
corresponding button; we used to hardcode this association, but
as the login mode does have a different layout, the button is now
determined programmatically.
Unfortunately, some containers take the text direction into account
when ordering their children, while some don't, so the current
code returned the wrong button in RTL locales.
https://bugzilla.gnome.org/show_bug.cgi?id=658983
Commit e5bc3a2ba8 changed the hierarchy of WindowClone, which
broke activating windows on hover during xdnd operations. To
avoid intrusive changes, just hide the new actor from picks so
that DND operations pick the actor actually meant to represent
the corresponding window.
https://bugzilla.gnome.org/show_bug.cgi?id=658640
Pop up a dialog when trying to install an extension so that users are aware
they are installing one. This is a security precaution in the case that an XSS
exploit has been found on the website, which could cause someone to inject a
<script> tag and silently install an extension.
https://bugzilla.gnome.org/show_bug.cgi?id=658612
libsoup won't check for a valid cert by default, so copy some logic from
glib-networking to check against the system cert list. Additionally, allow a
fallback for developers, ~/.local/share/extensions.gnome.org.crt, for easy
local development of the website.
https://bugzilla.gnome.org/show_bug.cgi?id=658870
For those who like their system pure, this provides the ability to purge a
pesky extension and its precious place on your disk space, and in your
"Local Extension" list.
https://bugzilla.gnome.org/show_bug.cgi?id=658612
Conflicts:
js/ui/extensionSystem.js
This ensures that we don't show an animation of an empty blob being hidden when
clicking an action button causes the notification to be destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=658525
The session list is supposed to hide itself if
1) the user is already logged in
2) there is only one xsession file installed
There was a bug causing 2) not to work.
This commit fixes that bug.
https://bugzilla.gnome.org/show_bug.cgi?id=658423
findUrl() was seeing strings like "You have 1 new message in
foo@example.com/Inbox" and finding the URL
"[http://]example.com/Inbox". Require that URLs either start at the
start of the string, or are preceded by whitespace or an open
paren/quote/etc.
(Since JS doesn't have look-behind assertions like perl does, we have
to actually match the URL-preceding character in the regex, and then
adjust the result findUrl returns accordingly.)
https://bugzilla.gnome.org/show_bug.cgi?id=636252
Although "x:5" could theoretically be a URL with scheme "x" and path
"5", it probably isn't. Only URLify strings that use the "authority"
syntax ("foo://"). (No one ever types out "mailto:" URLs in ordinary
text, so we don't want to match those either.)
https://bugzilla.gnome.org/show_bug.cgi?id=636252
Explode the regex onto multiple lines, and add comments explaining the
pieces. Also, change ()s to (?:)s (non-capturing groups) where
appropriate, and replace the UTF-8 characters with \u escapes so that
they actually work.
https://bugzilla.gnome.org/show_bug.cgi?id=636252
When the keyboard is configured, make lg shorter (if necessary) to
avoid overlapping it.
Also, make a few simplifications to lg's layout code. In particular,
move it into panelBox, to simplify its interactions with the panel.
https://bugzilla.gnome.org/show_bug.cgi?id=657986
The keyboard and tray need to animate together, but they sometimes
need to be in different stacking layers (eg, from the screensaver you
want access to the keyboard, but not the tray). So remove _bottomBox
and just keep trayBox and keyboardBox lined up manually.
https://bugzilla.gnome.org/show_bug.cgi?id=657986
Rather than having a single chrome layer and putting all of the chrome
into that, put the chrome actors directly into uiGroup, so that they
can be stacked independently of one another relative to other actors.
(This requires making uiGroup a ShellGenericContainer, so we can use
skip_paint to avoid painting non-visibleInFullscreen chrome when we're
in fullscreen.)
https://bugzilla.gnome.org/show_bug.cgi?id=657986
The struts were being set while the panel was offscreen (starting its
slide-in animation), and then belatedly getting fixed the next time
something else caused a chrome update. Fix this by setting them before
the animation, and freezing them during the animation.
https://bugzilla.gnome.org/show_bug.cgi?id=657986
Force an allocation at thumbnails creation so we can figure out whether we
need to scroll when selecting.
We also need to show() the whole AltTabPopup before calling _select() so that,
when computing the scrolling offset, the widgets already have their styles
loaded. Otherwise we will miss the switcher list item container's spacing.
https://bugzilla.gnome.org/show_bug.cgi?id=655069
At least for the foreseeable future, the gnome-session desktop
presence won't be used for anything but suppressing (non-urgent)
notifications. To clarify this behavior, rename the "Do Not Disturb"
switch to "Notifications" (and adjust the switch logic accordingly).
https://bugzilla.gnome.org/show_bug.cgi?id=652718
This patch fixes the "apps vanish from alt-TAB bug".
If a "package system" rips away and possibly replaces .desktop files
at some random time, we have historically used inotify to detect this
and reread state (in a racy way, but...). In GNOME 2, this was
generally not too problematic because the menu widget was totally
separate from the list of windows - and the data they operate on was
disjoint as well.
In GNOME 3 we unify these, and this creates architectural problems
because the windows are tied to the app.
What this patch tries to do is, when rereading the application state,
if we have a running application, we keep that app around instead of
making a new instance. This ensures we preserve any state such as the
set of open windows.
This requires moving the running state into ShellAppSystem. Adjust
callers as necessary, and while we're at it drop the unused "contexts"
stuff.
This is just a somewhat quick band-aid; a REAL fix would require us
having low-level control over application installation. As long as
we're on top of random broken tar+wget wrappers, it will be gross.
A slight future improvement to this patch would add an explicit
"merge" between the old and new data. I think probably we always keep
around the ShellApp corresponding to a given ID, but replace its
GMenuTreeEntry.
https://bugzilla.gnome.org/show_bug.cgi?id=657990
As extensions are now expected to provide a "disable" function,
they need to remove search providers they added. Implement the
removal functionality and add a public removeSearchProvider()
method.
https://bugzilla.gnome.org/show_bug.cgi?id=657548
We keep track of presence changes by connecting to the
Tp.AccountManager:most-available-presence-changed signal.
However, if multiple accounts are in use, telepathy may
lie to us and emit the signal even when the most available
presence is unchanged.
Work around this by keeping track of the current presence
ourselves.
https://bugzilla.gnome.org/show_bug.cgi?id=657703
Some search providers may want to change their results, or may not
want to block on an external service to get their results (DBus, etc.)
Set up an infrastructure to allow search providers to add their search
results at a later time.
Based on a patch by Jasper St. Pierre and Seif Lotfy.
https://bugzilla.gnome.org/show_bug.cgi?id=655220
This adds contacts search to shell, powered by libfolks.
Changes:
- Add Folks and Gee to the build system
- ShellContactSystem, a backend in C
- ContactDisplay, search frontend in JS
https://bugzilla.gnome.org/show_bug.cgi?id=643018
The current user status menu allow to set the session status,
which also influences the IM status when signed in with
mission-control. However, the way it is presented to the user
makes it hard to figure out how the statuses interact or that
there are two distinct status in the first place.
Therefore, use a separate control for each status, and update the
overall look to match gnome-contacts.
https://bugzilla.gnome.org/show_bug.cgi?id=652837
Given that our menus contain at most two columns, all switch widgets
in menus end up in the last columns, and thus aligned with the right
menu edge.
However, the updated user status menu will contain a section which
ignores the menu's column layout, so the switch might end up in
the middle of the menu if the overall width is determined by said
section.
At least for now, we always want the switch to align with the end,
so just expand switch menu items rather than adding an option.
https://bugzilla.gnome.org/show_bug.cgi?id=652837
Introduce a new menu widget, which displays the active item from
a set of options, and pops up a child menu to allow changing the
active item when activated.
https://bugzilla.gnome.org/show_bug.cgi?id=652837
Allow opening a popup menu from another menu. While the child menu
is open, events on the parent menu are blocked. The parent menu
is kept open when the child menu is closed; the child menu on the
other hand is closed with the parent, e.g. when the focus moves
to another toplevel menu.
This feature will be used to implement combo box menu items.
https://bugzilla.gnome.org/show_bug.cgi?id=652837
We haven't actually been calling the top-right menu "status menu" for
quite some time, so use the upcoming code changes as an excuse for
renaming it to "user menu".
Doing this rather than overdrawing a black rectangle saves us
(pixels in screen) * 8 bytes of memory bandwidth for every frame we draw going
into the overview.
It also allows us to dim the background on non-primary monitors making the
overall overview appearance consistent across all monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=656433
Instances of this class share a single CoglTexture behind the scenes which
allows us to show the background with different rendering options without
duplicating the texture data.
https://bugzilla.gnome.org/show_bug.cgi?id=656433
This commit adds GDM session support.
It provides a user list that talks to GDM,
handles authentication via PAM, etc.
It doesn't currently support fingerprint readers
and smartcards.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
The shell has a number of things that are only relevant for
logged in users (e.g. calendar events, telepathy integration, a
user menu, etc).
This commit moves those user session specific bits into their
own functions in preparation for making the shell code ready
for use at login time.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
Right now the panel code makes the left corner sync up with the
activities button and the right corner sync up with the user menu.
This is fine as long as we have an activities button and a user menu.
The login screen won't have those things, though.
This commit changes the panel corner code to try to figure out which
interface element is the most appropriate to sync up with based on
its position in the panel.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
Images are part of the notification spec, so we should support them.
Marina Zhurakhinskaya provided some code for getting the layout right
for this patch.
https://bugzilla.gnome.org/show_bug.cgi?id=621009
Have LayoutManager automatically deal with sizing and positioning
boxes for the panel and messageTray relative to the monitors.
Also, now that LayoutManager knows exactly where and how tall the
panel and tray are, have it manage the pointer barriers as well.
https://bugzilla.gnome.org/show_bug.cgi?id=612662
In order for transformation animations to look good, they need to be
incremental and have some order to them (e.g., fade out hidden items,
then shrink to close the void left over).
Chaining animations in this way can be error prone and wordy using just
Tweener callbacks.
This commit adds a new set of classes to help:
- Task. encapsulates schedulable work to be run in a specific scope.
- ConsecutiveBatch. runs a series of tasks in order and completes
when the last in the series finishes.
- ConcurrentBatch. runs a set of tasks at the same time and completes
when the last to finish completes.
- Hold. prevents a batch from completing the pending task until
the hold is released.
The tasks associated with a batch are specified in a list at batch
construction time as either task objects or plain functions.
Batches are task objects, themselves, so they can be nested.
For now, these APIs are temporarily getting staged in a gdm/ specific
subdirectory so they will be available for use by GDM. They aren't
specific to GDM, or even to doing animations, though, so the API may eventually
move in some form or another to a more general location. Alternatively, the
APIs may ultimately get dropped entirely and replaced by something else.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
A modal dialog in the shell blocks anything but that dialog from
receiving user input. Applications within the session and other
parts of UI are rendered non-reactive.
When GDM gets changed to use the shell for its greeter, the user
list will be presented as a shell dialog. That dialog shouldn't
block access to the panel menus, etc.
This commit adds a shellReactive property that makes the ModalDialog
class continue to block access to applications, but allow the user
to interact with the shell itself.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
The control-center contains user-pertinent settings
panels. These panels don't make sense to show outside
of a user's session, so hide them for session types other
than SessionType.USER.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
We're not going to want an overview at the login screen,
but a lot of code in the shell depends on the overview
existing.
This commit adds a new isDummy constructor property to
allow creating the overview as a non-functional, stub object
that doesn't do anything visible.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
The dash object is currently exposed as a public object.
It's only used outside of the overview for the dash object's
iconSize property though.
This commit makes the dash object private and proxies the dash
iconSize property to the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
Right now, when a user clicks on the panel clock, a menu pops up with a
calendar and a list of events from the user's schedule. The list of
events only makes sense from within a user's session, however.
As part of the prep work for making the shell a platform for the login
screen, this commit makes the events list optional.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
The theme currently hard codes the minimum size of the calendar
menu to make sure there's a designated area for events
(even if there isn't anything currently scheduled).
A side-effect of the hard coded minimum width is that
if the events area is hidden, the menu ends up much
bigger than the calendar. We don't currently ever hide
the events area, but we will in the future.
This commit moves the min-width restriction from the menu
specifically to the events area.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
The chrome layer contains the user interface elements (e.g.,
the panel) that disappear when fullscreen windows get displayed.
Panel menus are currently put in the chrome layer, but don't need
to be, since they are only displayed when the user is interacting
with the shell and not a fullscreen application.
Putting panel menus in the chrome layer does mean they will get
stacked below shell interface elements that aren't in the chrome layer,
though.
This commit changes panel menus to be on the same layer as most other
shell elements, so they get properly stacked above those elements.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
Right now, if buttons get set on a dialog after it is mapped,
they just pop in instantly.
We shouldn't have any harsh transitions like that, though.
This commit changes the buttons to quickly fade in, instead.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
All the system status menus in the panel offer a
menu item to jump to a relevant part of the
control-center.
This means each status icon has the same, or nearly the
same bit of code to:
- Add a new "action" menu item and listen for its activation.
- Hide the overview if it's showing when the menu item is activated
- Find the relevant control-center panel from its desktop file
- Launch the control-center to the relevant panel
This commit consolidates all those details in a new method,
addSettingsAction. This refactoring reduces code duplication and
slight inconsistencies in the code resulting from that duplication.
It will also make it easier in subsequent commits to hide settings menu
items when the shell is used in the login screen.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
A separator only makes sense if there are items on both
sides of it. There is quite a lot of code written
throughout the shell that manages the process of showing
and hiding separators as the items around those separators
change.
This commit drops all that code in favor of changes to the menu
implementation to dynamically hide or show separators as
appropriate, so the callers don't have to deal with it.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
Wireless and 3g dialog code has moved to gnome-control-center, so
we can stop calling out to nm-applet. Also, we can now enable the
notifications provided by the shell and kill a bit of code about
auth that is not actually needed.
https://bugzilla.gnome.org/show_bug.cgi?id=650244
Using the new ShellNetworkAgent, show a system modal dialog
(similar to the PolicyKit one) when NetworkManager needs secrets
for connecting to wireless.
https://bugzilla.gnome.org/show_bug.cgi?id=650244
The order of indicators depends on the order of calls to
Panel.addToStatusArea. To have it consistent across enabling and
disabling of extensions, we need to place the core ones first.
https://bugzilla.gnome.org/show_bug.cgi?id=653205
This way all standard indicators have a shell implementation
provided, which prevents issues with extensions enabling/disabling
(in particular with xrandr-indicator)
https://bugzilla.gnome.org/show_bug.cgi?id=653205
Extensions often want to add items to the system status area, so it
is useful to add a convenience API for it. Also, we now allow
for cleaner destruction of panel objects, by just calling destroy()
on it.
Based on a patch by Jasper St. Pierre.
https://bugzilla.gnome.org/show_bug.cgi?id=653205
The "id" variable was being sporadically reset to null, and as far as
Florian and I could determine, this is actually a Spidermonkey bug.
The issue has something to do with:
1) use of "let" for the variable
2) Nesting a dynamic closure inside of a for() loop
Work around it here for now - I tried to create a minimized test case
to hand to the Spidermonkey developers, but failed. A big part of
the problem is it's only sporadically reproducible.
Direction containers group all contiguous messages in the same direction into
their own parent container, allowing for smarter styling of similar messages.
https://bugzilla.gnome.org/show_bug.cgi?id=640271
This adds a new DBus method: InstallExtensionRemote(uuid : s, url : s)
Pass it the UUID of an extension and the URL of a manifest file: the same as a
metadata.json, but with a special key, '__installer', which is an HTTP location
that points to an zip file containing the extension. The Shell will download
and use it to install the extension. In the future, the manifest file may be
used to automatically detect and install updates.
https://bugzilla.gnome.org/show_bug.cgi?id=654770
The two similar keys were hard to manipulate to have specific effects, so just
remove one. Now there is an *explicit* whitelist: all extensions must be in the
'enabled-extensions' for them to be loaded.
https://bugzilla.gnome.org/show_bug.cgi?id=654770
It's generally more useful to see when a person sent a message instead of when
we received it. Also, a recent change in Telepathy made the received timestamp
be 0 for messages we send.
https://bugzilla.gnome.org/show_bug.cgi?id=640271
Adds methods to shell_global to allow taking screenshots
save the result into a specified png image.
It exposes three methods via shellDBus applications like
gnome-screenshot:
*) Screenshot (screenshots the whole screen)
*) ScreenshotWindow (screenshots the focused window)
*) ScreenshotArea (screenshots a specific area)
https://bugzilla.gnome.org/show_bug.cgi?id=652952
It is not possible to connect to hidden access points without
knowing the SSID, and it should be done using the control center
panel and the appropriate dialog. At the same time, this should
fix some warnings from libnm-glib and dbus-glib.
https://bugzilla.gnome.org/show_bug.cgi?id=646454
The shell should only notify in case no other client handles the message.
Empathy will ack the message if focused, so we don't want to step on its
toes.
Use the existing setting
org.gnome.desktop.default-applications.office.calendar.exec
as calendar application instead of the hard-coded evolution. Evolution
is still the fallback if that setting is cleared (it defaults to
evolution).
https://bugzilla.gnome.org/show_bug.cgi?id=651190
Since almost all of the callers of shell_app_activate were using the
default workspace (by passing -1), remove that parameter.
Add a new shell_app_activate_full() API which takes a workspace as
well as a timestamp; previously we might have been ignoring event
timestamps from elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=648149
This dramatically thins down and sanitizes the application code.
The ShellAppSystem changes in a number of ways:
* Preferences are special cased more explicitly; they aren't apps,
they're shortcuts for an app), and we don't have many of them, so
don't need e.g. the optimizations in ShellAppSystem for searching.
* get_app() changes to lookup_app() and returns null if an app isn't
found. The semantics where it tried to find the .desktop file
if we didn't know about it were just broken; I am pretty sure no
caller needs this, and if they do we'll fix them.
* ShellAppSystem maintains two indexes on apps (by desktop file id
and by GMenuTreeEntry), but is no longer in the business of
dealing with GMenuTree as far as hierarchy and categories go. That
is moved up into js/ui/appDisplay.js. Actually, it flattens both
apps and settings.
Also, ShellWindowTracker is now the sole reference-owner for
window-backed apps. We still do the weird "window:0x1234beef" id
for these apps, but a reference is not stored in ShellAppSystem.
The js/ui/appDisplay.js code is rewritten, and sucks a lot less.
Variable names are clearer:
_apps -> _appIcons
_filterApp -> _visibleApps
_filters -> _categoryBox
Similarly for function names. We no longer call (for every app) a
recursive lookup in GMenuTree to see if it's in a particular section
on every category switch; it's all cached.
NOTE - this intentionally reverts the incremental loading code from
commit 7813c5b93f. It's fast enough
here without that.
https://bugzilla.gnome.org/show_bug.cgi?id=648149
Add a helper function (mostly copied from gtkcalendar.c) for getting
the first week day for the current locale, using nl_langinfo if
available and falling back to the GTK+ gettext fallback otherwise.
Use that function in the calendar, so that the LC_TIME setting is
used if possible.
https://bugzilla.gnome.org/show_bug.cgi?id=649078
Instead, create three ripples and keep tweening them. This gives a dramatic
speedup when entering the overview, but means that we can't have the same animation
running twice. In this case, we "reset" the currently running ripple animation, but
it is hard to notice unless looking for it.
https://bugzilla.gnome.org/show_bug.cgi?id=656125
Extension developers may be confused about why their extensions aren't working:
the LookingGlass isn't a very obvious place, or even which errors are theirs.
To remedy this, save all errors per-UUID which allows them to be retrieved
later.
https://bugzilla.gnome.org/show_bug.cgi?id=654770
Add ShellVersion, designed for detecting OUT_OF_DATE extensions so they can't
be installed, as well as ApiVersion, designed for backwards-compatibility with
the SweetTooth web-app, which must support all shell versions.
https://bugzilla.gnome.org/show_bug.cgi?id=654770
GetExtensionInfo() takes a UUID and returns a JSON object with information
about that extension including their metadata, path and current state.
ListExtensions() takes no arguments and returns a JSON object mapping UUIDs
to the same information objects described above.
https://bugzilla.gnome.org/show_bug.cgi?id=654770
As an effort to prevent a string freeze to land timestamps on 3.0, we reused
translations for the calendar. Now that the string freeze is long gone, make
some proper strings.
https://bugzilla.gnome.org/show_bug.cgi?id=640271
The notification spec supports the concept of a 'default' action:
"The default action (usually invoked my clicking the notification)
should have a key named "default". The name can be anything, though
implementations are free not to display it."
Support this by invoking the 'default' action rather than a emitting
the 'clicked' signal when clicking notifications which specifie a
default action.
Also don't add an action button for the default action.
https://bugzilla.gnome.org/show_bug.cgi?id=655818
LayoutManager and Chrome are already somewhat intertwined and will be
becoming more so. As a first step in merging them, move the Chrome
object into layout.js (with no other code changes).
https://bugzilla.gnome.org/show_bug.cgi?id=655813
Looking Glass is supposed to slide out from underneath the panel.
Rather than fiddling with Main.chrome.actor directly, just add the lg
actor to the chrome, and fix its stacking there.
https://bugzilla.gnome.org/show_bug.cgi?id=655813
With the old pre-boxpointer summary notifications, it sort of made
sense that the summary notification actor was a child of the message
tray. But there's no reason for that now, and in fact, it ends up
requiring special cases in some places since hovering over the summary
notification counts as hovering over the tray. So, fix this.
https://bugzilla.gnome.org/show_bug.cgi?id=655813
Rather than having the panel corners as independent bits of chrome and
manually syncing their positions, put them inside the panel actor, and
update the panel's allocation code to position them correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=655813
The buttons should have a glassy transparent look. Also, they should not
be as tall, should light up on hover, and their labels should be white
in order to stand out. Making the labels solid white requires removing the
transparency set in modalDialog.js. Also, add a separate color setting
for the dialog as a whole - this avoids having a white icon.
https://bugzilla.gnome.org/show_bug.cgi?id=655428
The specs call for a 2 pixel gap between the panel and its menus,
though we need to specify this as 4 pixels, since it's relative to the
bottom of the icon/title, not the bottom of the panel (up until now,
the point of the menu arrow was actually overlapping the menu's
highlight underline).
Also, move the gap specification into the CSS, since it makes more
sense there.
https://bugzilla.gnome.org/show_bug.cgi?id=655627
Since this link in the keyboard menu points to Region and Language
Settings in System Settings, we should be consistent and use that
term instead of "Localization Settings"
Also, this removes ellipsis from "Show Keyboard Layout" since it
doesn't require further input.
https://bugzilla.gnome.org/show_bug.cgi?id=652984
The current check for fullscreen windows ignores the window's
minimization state, so that chrome which is hidden in fullscreen
will always hide if the window on top of the window stack is
fullscreen, even if it is actually minimized.
Instead, skip minimized windows when looking for fullscreen windows.
https://bugzilla.gnome.org/show_bug.cgi?id=655446
_fixMarkup() was supposed to be ensuring that the markup we passed to
clutter was correct, but it was validating the syntax incorrectly, and
wasn't checking that the markup was valid (or even well-formed). This
is bad because if you pass bad pango markup to
clutter_text_set_markup(), it will g_warn and drop the string on the
floor.
Fix by fixing up the regexps, and then calling Pango.parse_markup() on
the result, and just xml-escaping everything if parse_markup() fails.
https://bugzilla.gnome.org/show_bug.cgi?id=650298
Keeping the volume menu open after setting the desired volume isn't that
useful and forces a second click (or an Esc press) to dismiss it. Allow for
the sliders to be used with a single click-hold-move-release.
https://bugzilla.gnome.org/show_bug.cgi?id=649586
Move the HotCorner class from panel to layout, and make the panel
manage its own HotCorner.
Stick the panel's HotCorner into the Activities button actor (rather
than separately floating above it), so that hover tracking on the
button works properly without needing hacks in HotCorner.
https://bugzilla.gnome.org/show_bug.cgi?id=645759
The fact that everything in the top bar except the activities button
was a menu made various things difficult. Simplify this by making the
activities button be a menu too, but just hack it up a bit so that the
menu associated with the button never actually appears.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=645759 (Clicking on
Activities with menu up leaves a funny state) and its semi-dup 641253
(panel keynav between Activities and menus is quirky).
visibleInOverview chrome was visible even when the screensaver was
active. Although we may eventually need visibleInScreenSaver, that
should be a separate flag.
Fix this by tracking the screensaver active state, and hiding the chrome
when the screensaver is active.
https://bugzilla.gnome.org/show_bug.cgi?id=654550
Fix the signal handling; you can't use this.connect('ActiveChanged')
to connect to a D-Bus signal after replacing the signal methods with
the lang.signals versions. Just leave it using the D-Bus signal names,
just like it uses the D-Bus method names.
Also, remove the "_" from "_screenSaverActive", to match what
AutomountManager checks for, and remove getActive(), since it's not
needed.
https://bugzilla.gnome.org/show_bug.cgi?id=654550
As _updateCount has been designed to be overwritable by subclasses,
move the check for _actorDestroyed into _setCount(), to fix the
problem described in commit 5f6ac33d5 in derived types as well.
If the resident source is destroyed, it should be recreated
immediately, so that it is available when another volume is
mounted. However, we only connect to the 'destroy' signal
on the original source, not on newly created ones. As a result,
the resident source only works twice, after that it shows up
without icon and an empty notification.
Fix by always connecting to the source's 'destroy' signal.
When trying to update the message count after a summary icon has
been destroyed, the label to display the count is no longer valid
and trying to set its text results in some Clutter warnings.
Basically do what NautilusPlacesSidebar does with the drive/volume/mount
eject/unmount/stop priorities.
We follow this pattern:
- always prefer Safely Remove if available (i.e. drive.stop())
- fallback to ejecting the mount/volume/drive if that's not possible
- finally, fallback to unmounting the mount if even eject is not
available
This also means we don't care about the distinction between
Stop/Eject/Unmount at this level. Disk Utility (or Nautilus) are
available for those who want that degree of control, but the common case
here should do the most useful action without presenting the choice.
https://bugzilla.gnome.org/show_bug.cgi?id=653520
Ideally, this would be an entirely-JS implementation, but we have a
couple of issues with gjs and gobject-introspection to work around, so
we need a ShellMountOperation class for the time being.
This first commit implements the show-processes dialog, with a system
modal style very similar to the EndSession dialog.
Implementations of ask-question and ask-password will follow shortly.
https://bugzilla.gnome.org/show_bug.cgi?id=653520
If possible, use the results from the sniffer process in order to have
less-generic alternatives to the file manager in the proposed autorun
choices.
https://bugzilla.gnome.org/show_bug.cgi?id=653520
Autorun preferences can be fine-tweaked at the content-type level from
the System Settings 'Removable Media' panel.
Use those settings to figure out the default action for newly-mounted
mounts.
https://bugzilla.gnome.org/show_bug.cgi?id=653520
The AutomountManager class is the low-level counterpart of the
previously introduced AutorunManager, and takes care of extracting the
list of valid mounts from a GVolume or a GDrive and mounting them,
provided a number of conditions and requirements are met.
AutomountManager also keeps track of the current session availability
(using the ConsoleKit and gnome-screensaver DBus interfaces) and
inhibits mounting if the current session is locked, or another session
is in use instead.
https://bugzilla.gnome.org/show_bug.cgi?id=653520
AutorunManager is a class that takes care of displaying and managing
notifications and UI for storage devices.
When a mount appears and a number of conditions are satisified, a
transient notification will be displayed to immediately interact with
the device. AutorunTransientDispatcher is the object that takes care of
showing/hiding the notification sources as devices appear/disappear.
Likewise, current mounts are kept in a list and presented within a
list in a resident notification, handled by AutorunResidentSource.
https://bugzilla.gnome.org/show_bug.cgi?id=653520
On error, we tried to kill and respawn gnome-power-manager, but
as of commit c5676900 the DBus interface provided by g-s-d's power
plugin is used, so the respawning does not have any effect.
https://bugzilla.gnome.org/show_bug.cgi?id=654300
When one of the networks in the main menu is removed and we have
a More... submenu, we can take the first out from the submenu and
show it in the main menu.
https://bugzilla.gnome.org/show_bug.cgi?id=647175
This is needed if we are handling an incoming text channel and then user tries
to open a chat with the same contact using Empathy. In this case, the Shell
should delegate the channel back to Empathy and just continue observing it as
it does for usual outgoing channels.
Depends on telepathy-glib 0.15.3 as
tp_base_client_set_delegated_channels_callback() has been added in this
version.
https://bugzilla.gnome.org/show_bug.cgi?id=654237
Due to an accidental addition line in commit c8670819, all switches in popup
menus accidentally gave the appearance that they were turned off.
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
https://bugzilla.gnome.org/show_bug.cgi?id=654267
We don't want sources that are no longer associated with a running application
to stick around in the message tray.
Message tray sources were removed when the associated application’s state
changed to Shell.AppState.STOPPED . This caused sources for applications
that were still running, but did not have any open windows to be removed.
Instead, we should use the notification’s sender removal from DBus as an
indicator for when to remove the associated source from the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=645764
If we're typing we want to send composing. If we empty the entry we
want to send active. If we're typing but don't type any more for
COMPOSING_STOP_TIMEOUT seconds, we want to send paused. Simple.
This behaviour was stolen from Empathy where it has won many awards.
https://bugzilla.gnome.org/show_bug.cgi?id=650196
Based on patch from Jonny Lamb <jonnylamb@gnome.org>
Signed-off-by: Alban Crequy <alban.crequy@collabora.co.uk>
Commit 64b2b4a7d4 changed the monitor layout handling, resulting
in some layout errors due to a subtle change in memory handling:
when zooming a window in the overview, the available zoom area is
calculated by subtracting the panel height from the primary monitor
area. This area used to be a copy of the monitor rect, but as now
the rect itself is returned, zooming a window on the primary monitor
repeatedly modifies the monitor rect, leading to layout errors in
various parts of the shell.
Fix by using a copy when calculating the available zoom area.
https://bugzilla.gnome.org/show_bug.cgi?id=654105
Use a longer fade-in time, but with an inout transition, so that the
dialog starts fading in very slowly and then picks up speed after
150ms or so. That way if the user releases Alt+Tab right away, they'll
never actually see the dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=652346
Remove ShellGlobal's monitor-related methods, and have
Main.layoutManager provide that information instead. Move
Main._relayout() to LayoutManager, and have other objects connect to
the layout manager's 'monitors-changed' signal to know when the screen
geometry has changed.
https://bugzilla.gnome.org/show_bug.cgi?id=636963
This is better for memory management, and we'll see any errors this
way, which we may eventually want to do something with.
We need to make this change because gjs recently started checking
(allow-none) on callbacks.
Every place that called chrome.addActor was specifying
visibleInOverview:true, and no existing designs call for chrome that
disappears when you enter the overview, so just drop that as an
option.
https://bugzilla.gnome.org/show_bug.cgi?id=633620
Due to lockdown settings or Polkit policy, shutdown may not be
available. If this is the case, the "Power off ..." action should
be hidden from the user status menu.
https://bugzilla.gnome.org/show_bug.cgi?id=652038
Sliding out the workspaces pager when starting a drag causes a lot
of motion. With the pager only hiding if workspaces are not used,
it is better to require to explicitly hover the workspaces sidebar
for the sliding.
https://bugzilla.gnome.org/show_bug.cgi?id=652730
Use the new PopupSwitchMenuItem functionality when bluetooth cannot
be enabled. Use it also for showing "connecting..." when activating
device items.
https://bugzilla.gnome.org/show_bug.cgi?id=648048
Moves and converts NMDeviceTitleMenuItem from network.js into
PopupSwitchMenuItem, so that it can show both a switch and a
greyed-out status label. This will be soon used by the Bluetooth menu.
https://bugzilla.gnome.org/show_bug.cgi?id=648048
_createNetworkItem was always appending access point at the end of
the menu when their position was < 5 (NUM_VISIBLE_NETWORKS), ignoring
the presence or absence of _overflowItem, which thus ended in the
middle of the network list. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=652313
After completing the overview transition, the workspace view is
clipped to avoid overlapping the search entry/view selector titles
while switching workspaces. For clipping, the view's position and
size was used, which works well assuming that the workspace pager
will start hidden or stay zoomed out while the overview is visible.
However, that assumption holds no longer true, as auto-hiding the
pager now depends on the number of workspaces, and thus may change
while in the overview. For instance, when starting with the pager
being visible, the clip area ends up being too small when moving
all windows to the first workspace (and thus triggering auto-hide).
As a fix, handle the clip rectangle separately from the view's
geometry, and set it always to the area the workspaces would
occupy with the pager hidden.
https://bugzilla.gnome.org/show_bug.cgi?id=653142
We call global.sync_pointer() on MetaScreen::restack as a hack to try
to fix up the hover state after a pointer grab. Previously we were
doing this in chrome.js, since there was already a ::restack handler
there anyway, but this isn't really related to the chrome at all, so
move it to main.js instead.
https://bugzilla.gnome.org/show_bug.cgi?id=633620
This is better for memory management, and we'll see any errors this
way, which we may eventually want to do something with.
We need to make this change because gjs recently started checking
(allow-none) on callbacks.
Workspace thumbnails are supposed to be miniatures of the "real"
workspace they represent, but currently they show minimized windows
like the window picker.
Instead, hide minimized windows and track changes to update the
thumbnail accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=651569
With commit 59a3e393f9 whether the workspace pager should autohide
now depends on the number of workspaces. As we only track changes
to the number of workspaces while the overview is visible, we miss
changes in "normal mode", i.e. when creating a new workspace by
moving a window with ctrl-alt-shift-arrow; as a result, the pager's
autohiding might be incorrect when entering the overview after that.
As a fix, keep tracking changes to the workspaces when the overview
is hidden and update the zoom options.
https://bugzilla.gnome.org/show_bug.cgi?id=653078
Commit 429f809b7 fixed an exception in getDragActorSource(), but
the returned actor is only an approximation (e.g. in contrast to
the actual drag actor, it includes the label).
Try a bit harder to return the correct actor and only fall back to
the approximation when necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=645990
The purpose of autohiding the workspace pager on the right was to
avoid exposure of workspaces to users who are not using them.
However, for users who do use workspaces, the behavior limits the
purpose of the overview. To fix, always show the pager if more than
one workspace is actively used.
https://bugzilla.gnome.org/show_bug.cgi?id=652714
Using the list of stylesheets loaded with st_theme_load_stylesheet(),
one can build an StTheme that is completely identical to the previous
one, except for one property (application-stylesheet).
This allows rt and the user-theme extension to work while respecting
the theming of other extensions.
https://bugzilla.gnome.org/show_bug.cgi?id=650971
Currently the user has to find an empty spot in the workspace
to be able to launcha new instance of an app using dnd.
This is unnecessary hard, so just allow dropping on windows too.
https://bugzilla.gnome.org/show_bug.cgi?id=652079
The screen panel in System Settings has a preference whether the
screen should be locked on suspend. This works fine when suspending
by closing the lid, but the "Suspend" menu item in the user status
menu ignores the setting and always locks the screen.
Fix by activating the screen saver before suspending rather than
locking explicitly.
https://bugzilla.gnome.org/show_bug.cgi?id=652327
As the Shell does more than observing channels (users can interact with them),
it has to be an Handler as well. We have to make sure that all the new
incoming text channels are handled by the Shell by default, so we make it an
Approver as well.
From an user point of view, the only difference is that Empathy's tray icon
will stop blicking when receiving new channels.
We rely on ChannelDispatcher.DelegateChannels() and PresentChannel() to
interact with Empathy. Those methods have been implemented in
telepathy-mission-control 5.9.0 and telepathy-glib 0.15.0.
If we have more than 5 (which can happen with VPN connections), place
them into a More... submenu, which also becomes scrollable if needed.
To protect from race conditions and ordering issues while reading
connections, sort them in alphabetic order when the timestamp is equal.
https://bugzilla.gnome.org/show_bug.cgi?id=651602
shell_global_get_memory_info() is a new function which extracts a few
global counters we have already, namely glibc's mallinfo, spidermonkey's
JSGC_BYTES, and gjs' counters for boxed/object/etc wrappers.
There is some slight overlap with perf; ultimately though I'd
like this function to do some more extensive analysis, so it wouldn't
be quite the same.
perf is going to be mainly concerned with how big the whole process
over time is; memory_info is for debugging memory leaks.
https://bugzilla.gnome.org/show_bug.cgi?id=650692
When timestamps or presence or alias changes were appended before,
the _history could grow unbounded, leaving behind an unfruitful chat
log of:
Jasper has gone offline.
Jasper has gone online.
Jasper has gone offline.
Jasper has gone online.
ad nausem.
https://bugzilla.gnome.org/show_bug.cgi?id=651086
Theme authors now have the power (and responsibility) of creating fade
effects with the new CSS length property '-st-fade-offset'. A value of
0 disables the effect.
This new CSS approach replaces the current programmatic toggle of
the 'vfade' property. A new CSS style class name 'vfade' is used as
a replacement for the old property.
https://bugzilla.gnome.org/show_bug.cgi?id=651813
Currently the workspace geometry is updated on zoom/allocation
changes, which means that newly added workspaces use their initial
geometry of (0, 0, 0, 0) until the next zoom change. As a result,
windows on the affected workspaces are mispositioned, e.g. placed
outside the workspace area. To fix, set the geometry on newly added
workspaces to the view's cached values.
https://bugzilla.gnome.org/show_bug.cgi?id=649001
Workspaces used to contain the desktop background, so when a
workspace was removed, we animated its actor to an off-screen
position before destroying it. As the background has been
removed a while ago, we can destroy the actor directly.
https://bugzilla.gnome.org/show_bug.cgi?id=645031
If the former is empty (default), only the extensions not contained in
the latter are loaded. Else, all extensions in the former that are
not contained in the latter are loaded.
https://bugzilla.gnome.org/show_bug.cgi?id=651088
We should only show the trash can when the user starts dragging a
favorite from the dash, not when the user starts dragging an application
that happens to be a favorite via a window or an application icon
in the applications view.
https://bugzilla.gnome.org/show_bug.cgi?id=642895
Some users are confused when their devices are not shown in the
network menu, even if they configured them manually. Mark their presence
by showing them in the menu, even if they cannot be otherwise
interacted with.
Also add a status string for deactivating devices (none currently,
soon will appear in NetworkManager).
https://bugzilla.gnome.org/show_bug.cgi?id=646946
A new envrionment variable GNOME_SHELL_ENABLE_CLEANUP is added which
causes us to attempt freeing global data. The reason this isn't
enabled by default is that it's a waste of time at best, and at
worst in corner cases could cause crashes which would fill up
crash databases. Better to leave it as a developer-only tool.
Start stubbing out some cleanup in ShellGlobal.
https://bugzilla.gnome.org/show_bug.cgi?id=649517
Since both the hot corner's ClutterGroup and the hot corner's
ClutterRectangle button-release-event is connected to
_onCornerClicked() we must handle it there by returning 'true' to
Clutter or else _onCornerClicked() is called twice which defeats the
HOT_CORNER_ACTIVATION_TIMEOUT logic.
https://bugzilla.gnome.org/show_bug.cgi?id=649427
If you receive a message, a notification will appear. If you reply in
Empathy's chat window before the notification disappears, the
notification is updated with the contents of the message you *just*
sent! We should only update notifications if they're incoming.
https://bugzilla.gnome.org/show_bug.cgi?id=650219
Signed-off-by: Jonny Lamb <jonnylamb@gnome.org>
AltTabPopup was calling global.stage.get_actor_at_pos() "to force a
stage relayout", but that function does not actually have that effect.
It was also occasionally causing Clutter warnings (possibly due to a
clutter pick-buffer-caching bug?). So just remove the call.
https://bugzilla.gnome.org/show_bug.cgi?id=650317
Move some more environment-initializationy stuff from main.js to
environment.js, and be more careful about not importing shell JS
modules until after the environment has been fully patched.
Change gnome-shell-plugin to call Environment.init() before
Main.start(); this means that Environment.init() now runs before any
shell JS modules (besides environment itself) have been imported.
Make run-js-test create a ShellGlobal and use its js_context, so that
the shell_global_set_property_mutable() stuff in Environment.init()
will work correctly in tests as well.
https://bugzilla.gnome.org/show_bug.cgi?id=649203
The lg window was losing focus when the page with the entry got unmapped;
fix it to refocus itself after that.
Fixing this problem revealed that previously we were focusing the
entry on open(), but not ensuring that that page was selected, meaning
you could type into the entry without being able to see it. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=647303
The mouse-wheel zooming "easter egg" breaks horribly when you
drag a window, due to ugly lightbox reparenting tricks it uses.
For now, just end any zoom before we drag the window around.
https://bugzilla.gnome.org/show_bug.cgi?id=649632
All WPA APs were getting set as WPA2 due to the check for privacy;
WPA/WPA2 APs *must* set the Privacy bit according to the standard,
so we'd never end up in the case for NMAccessPointSecurity.WPA.
Fix that, and also add flags for WPA[2] Enterprise which we'll
use a bit later for the first-time connect case for 802.1x enabled
access points.
Instead of rolling our own code, use new libnm-glib functions to do
the same thing. Requires libnm-glib as of
779215c742bbe29a2c66202ec7e2e6d43edeb8ff (which will be part of 0.9).
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=648648
A "cosmetic" code arrangement I requested in code review resulted
in one too few items being removed from the queue for each incremental
chunk of icons added. Fix.
https://bugzilla.gnome.org/show_bug.cgi?id=648739
We used used to indicate to the user the ability to move to another workspace
during dnd by highligthing the adjacent workspaces on hover.
This was done by changing the workspace's opacity to 200 and set it to
255 for the highlighted adjacent ones.
This is now no longer needed as the design was completely changed since
then (overview relayout; we no longer represent workspaces in the way
we did before) and introduces a bug where we don't properly reset the
opacity after the drag action, so just remove that code.
https://bugzilla.gnome.org/show_bug.cgi?id=648983
If the user typed "a", hit up, and pressed enter again, we wouldn't re-set the
history pointer to the end, so the broken navigation would instead go to the
entry before that.
https://bugzilla.gnome.org/show_bug.cgi?id=648765
If a user is fast and mouses over a window while the workspace thumbnail
animations are playing, it can be frustrating when the close button won't
appear at the end of the animation.
https://bugzilla.gnome.org/show_bug.cgi?id=645848
The initial selection of the Alt+Tab dialog was happening before the
dialog was shown and allocated, and so the "do we need to scroll"
check used bogus coordinates. Fix by showing the dialog (and forcing
an allocation) first.
https://bugzilla.gnome.org/show_bug.cgi?id=647807
Previously, we skipped rebuilding device items in case the device
had already been seen, but this caused the connected switch not to
be updated. Now it has been refactored to update in case the device
changes, and to create only when the device is completely new.
https://bugzilla.gnome.org/show_bug.cgi?id=647565
Connect to button-press-event on the menu item actor, not on the
slider, so any part that is highlighted is also clicked. This means
that click on the left of the volume slider is a rapid way to mute.
https://bugzilla.gnome.org/show_bug.cgi?id=646660
Adds a function that compares wireless networks and keeps them sorted
at all times. Order is: first already configured connections, then
first secure networks, then alphabtic. Also, the appearance of a new access
point no longer causes the whole menu to be rebuilt (but it still linear
searches for the position, I guess that could be skipped), which caused
the addition of more code for tracking the active access point.
https://bugzilla.gnome.org/show_bug.cgi?id=646580
Rename a few Panel fields and add a _statusArea object pointing to the
status area PanelButton objects. You can now address each item
consistently from lg:
Main.panel._activities
Main.panel._appMenu
Main.panel._dateMenu
Main.panel._statusArea.a11y
Main.panel._statusArea.volume ...
Main.panel._userMenu
https://bugzilla.gnome.org/show_bug.cgi?id=646915
If a JS object has an 'actor' property pointing to a ClutterActor,
include the actor's toString() output in the delegate's toString()
output. Eg:
js>>> Main.panel
[object Object delegate for 0xff6080 StBoxLayout.menu-bar "panel" ("Activities")]
https://bugzilla.gnome.org/show_bug.cgi?id=646919
To keep the app icon from overlapping the panel's (border-image)
border, a custom property for clipping the app menu icon's bottom
was introduced. But if the clip region is set before the initial
icon is set, the entire actor ends up clipped. Also due to the double
meaning of clutter_actor_get_height() (e.g. preferred height versus
allocated height), the clip region may end up too large and the icon
overlaps the panel's border-image.
Fix both problems by updating the clip region on size changes as
well, rather than on style changes only.
https://bugzilla.gnome.org/show_bug.cgi?id=644122
The IP_CHECK and SECONDARIES states should be considered part of the
"connecting..." phase.
DEACTIVATING should be its own stage, but that would break string
freeze, so we just treat it like DISCONNECTED for now.
UNMANAGED needs to be treated differently in 3.2, but it is too late
to fix it for 3.0.1.
https://bugzilla.gnome.org/show_bug.cgi?id=646946
Alt+Tab's special case of "switch to the most-recently-used window even if
it's in the same app" is actually an hindrance for users to get a firm mental
model of Alt+Tab. Now that we have Alt+Above_Tab the special case is no longer
needed.
https://bugzilla.gnome.org/show_bug.cgi?id=647907
Currently, the banner text is always located at the right of the
title - we need to swap those around for RTL locales. Rather than
using the locale directly to figure out the ordering, try to
determine the direction of the title label and let it control the
overall direction of the notification - this way, notifications
generally come out right when mixing scripts.
https://bugzilla.gnome.org/show_bug.cgi?id=646921
In the current implementation of the search entry, when replacing a
selected search term with another term, the first character of the
replacement is prepended to the hint text rather than starting a new
search. This fix makes sure that the focus is not lost when changing
the selected search term.
https://bugzilla.gnome.org/show_bug.cgi?id=636341
When updating search results, the current result set is
recreated from scratch before setting the selection
highlight. This results in two style changes of the selected
item, and as a CSS transition is used to animate the style
change, the selected item flickers if it remains the same as
with the previous search term.
Fix by hiding the result set until the selection is set, to
avoid the transition in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=646019
The addition of _backgroundStack to ModalDialog broke focus
navigation, because it was interposed between the focus group root and
all of the interesting content, but since it isn't an StWidget,
st_widget_navigate_focus() was unable to navigate through it. Fix this
by moving the focus root to this._dialogLayout (inside the
_backgroundStack) instead.
Additionally, in EndSessionDialog specifically, _initialKeyFocus
wasn't being set until after opening the dialog, so it was ignored.
Also change ModalDialog.close() to clear the _savedKeyFocus that
popModal() set, so that dialogs that are repeatedly closed and
reopened will have their focus revert back to _initialKeyFocus each
time.
https://bugzilla.gnome.org/show_bug.cgi?id=646740
The icon set as secondary icon of the search entry depends on whether
a search is active or not - clicking the icon should reset the entry
only in the former case. This is implemented by connecting/disconnecting
the 'secondary-icon-clicked' signal when updating the icon, but an
additional signal connection was left-over when refactoring the search
entry, resulting in clicks on the inactive icon removing the hint text.
Fix by removing the stray signal connection.
https://bugzilla.gnome.org/show_bug.cgi?id=646855
The change to StTextureCache for bug 644142 broke lg's inspector icon,
which was not specifying St.IconType.FULLCOLOR, but was relying on the
fact that SYMBOLIC (the default) would fall back to it. Fix the icon
by specifying FULLCOLOR explicitly.
(We should probably be using a symbolic icon here, but there is no
available icon with a select/pick/point-to/etc kind of meaning.)
https://bugzilla.gnome.org/show_bug.cgi?id=646451
When more than one device exists, we need to reset the section title's
device to null, and in that case we must show nothing (neither the switch
nor the label, but an empty label is OK anyway). Also, we need to
update the device statusItem immediately when constructing it, as we
may not get any state-changed.
https://bugzilla.gnome.org/show_bug.cgi?id=646074
NMDeviceModem._createSection was not checking whether it should have
shown the connection list, resulting in status item shown even if
the device was in an invalid state.
Also, fix a logic error when creating the operatorItem and fix overriding
_clearSection protected method.
https://bugzilla.gnome.org/show_bug.cgi?id=646395
NMApplet connects to each NMDevice's state-changed signal and stores
the signal handler id on the NMDevice itself. However, it was using
the same name as NMDevice itself was using to store the handler ID for
the underlying GObject's state-changed signal, thus overwriting it,
and resulting in *neither* signal handler getting removed if the
device went away. (This probably isn't a problem, since the device is
going away, but it causes a warning.)
Also, at least for WWAN devices, the device state changes to UNMANAGED
immediately before disappearing, but getStatusLabel() wasn't handling
that case and printed a warning instead. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=646708
If you restart NetworkManager, then the list of active connections
is emptied, then comes back with the same GObjects in it. If the
_primaryDevice field isn't cleared on the object, then we won't
know we need to set it back on the device, resulting in the active
device not showing up in the menu.
https://bugzilla.gnome.org/show_bug.cgi?id=646558
A notify signal does not include the new value of the property in
its signature, so the handler was trying to compare a GParamSpec with
a number when updating. Fix it to always retrieve the value from the
object.
https://bugzilla.gnome.org/show_bug.cgi?id=646443
ViewByCategories._removeAll clears the sections, but the filter passed
to view still expects them to exists. Therefore, refresh the view
after the section has been rebuilt and the All filter reapplied.
https://bugzilla.gnome.org/show_bug.cgi?id=645801
Right now, the network menu will overflow the screen if More...
is selected with many access points. As a short-term workaround
for this, add a scrollbar for submenus of panel dropdown menus
if they would cause the toplevel menu to overflow the screen.
- Put the actors in a PopupSubMenu in a StScrollView so we get
a scrollbar if the allocated space is smaller than the height
of the menu. Expand animation is turned off in the scrolled case
to avoid weirdness.
- When we pop up a panel menu, set a max-height style property
on the panel menu to limit it to the height of the screen.
- Hack event handling while the scrollbar is dragged to make
the scrollbar work properly.
https://bugzilla.gnome.org/show_bug.cgi?id=646001
Since the icon area is end-aligned, the signal strength icon for
insecure networks was ending up aligned with the lock icon for secure
networks. Fix that by always including a _secureIcon, but having it be
blank for the insecure networks.
https://bugzilla.gnome.org/show_bug.cgi?id=646121
Adding correct annotations to Gio.File.load_contents revealed that gjs
doesn't actually support array+length combinations. For 3.0 this would
be invasive to fix, so add a method to ShellGlobal which does what
we need.
https://bugzilla.gnome.org/show_bug.cgi?id=646333
Figuring out the size of an unmapped actor is not completely
reliable because styles aren't fully assigned until an actor
is mapped. So show the submenu before computing the size we
want to tween to.
https://bugzilla.gnome.org/show_bug.cgi?id=645949
Some connection types (like wimax) are not supported by the menu, and
should be ignored instead of throwing exceptions. Also, NetworkManager
had a bug that sent connections with invalid settings. This should not
happen, but in case it does, we will not blow up, but just log a warning
and continue silently.
https://bugzilla.gnome.org/show_bug.cgi?id=646355
When a device is connecting, we can continue showing available
connections and access points, as well as the active one with the dot.
(Hiding was a remnant of when the device status was on a different
menu item than the title)
https://bugzilla.gnome.org/show_bug.cgi?id=646381
A cosmetic change recommended in review of the patch to fix the
VPN Connections switch ended up introducing a logic error that
made the switch not work properly. Fix.
https://bugzilla.gnome.org/show_bug.cgi?id=646380
It was always reporting true, even if disconnected. At the same time,
add a signal that is emitted when state changes and update the UI
accordingly.
In the future (with another libnm-glib API break) we should use the
NMVPNConnection object to track the connection state, so that we can
show if we're connecting or we need authentication.
https://bugzilla.gnome.org/show_bug.cgi?id=646380
NMDevice._findConnection expects an uuid as parameter, but
checkConnection was passing a NMConnection object. This caused
exists to be always false, thus the connection was added again every
time the 'updated' signal was emitted.
https://bugzilla.gnome.org/show_bug.cgi?id=645702
When a source has an associated tray icon, we would forward all clicks
to the X11 window, meaning that the summary notification could not
be opened. Instead, restore normal event flow for clicks, when the
source has notifications in the queue.
https://bugzilla.gnome.org/show_bug.cgi?id=645753
Since the opacity of the application menu is controlled by
it's _targetIsCurrent flag, we need to respect that when entering
and leaving the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=645734
Sometimes, log messages are hard to differentiate from normal,
unread recent messages, so give a separate style to messages
retrieved from the TelepathyLogger service.
https://bugzilla.gnome.org/show_bug.cgi?id=645609
If we have a date that's not within the last week, it's really
confusing to display it as "Sent at 9:23 on Tuesday". Steal
some strings from calendar.js for displaying older dates to
avoid a string-freeze break.
https://bugzilla.gnome.org/show_bug.cgi?id=645609
This ensures that we don't show a small black blob fading away
when the user clicks on the notification and it is removed.
Set HIDING state right away in _hideSummaryBoxPointer() so that
it is only called once. Update this._pointerInTray when the tray
is unlocked, so that we are not dependent on escapeTray() being
triggered by 'done-displaying-content' signal.
https://bugzilla.gnome.org/show_bug.cgi?id=645697
Use Meta.later_add() with BEFORE_REDRAW rather than Mainloop.idle_add()
to add the banner body so that the notification body is reliably added
after the first frame is drawn. This is important for notifications that
are expanded right away, such as the summary notifications that
were not shown as banners because the user was in the Busy mode or was
interacting with the summary. Otherwise, these notifications were sometimes
shown with an ellipsized banner and were only getting full content when
they were done animating.
Only add expanded content and signal the change once. Previously, we
used to signal the change numerous times and processing this signal was
holding up processing other things, such as the user moving the mouse
away from the notification so that the notification collapses.
https://bugzilla.gnome.org/show_bug.cgi?id=645719
Since the hotcorner is a reactive actor, and it is over the Activities
button, hovering on it results in a leave-event for the button.
This is not noticeable when opening the overview, as the button is
correctly prelighted, but it is when closing, if you keep the mouse
near the hot corner, as the button is kept in normal state, despite
the mouse being over it.
https://bugzilla.gnome.org/show_bug.cgi?id=645751
Instead of setting the x/y position of the box pointer, which results
in a long change of workarounds for limitations of the Clutter
layout system, set the anchor point instead, which takes the
positioning out of the layout system.
The position is computed as a combination of the position computed
from the allocation and the box pointer's size, and an offset that
we tween when animating showing and hiding the box pointer.
https://bugzilla.gnome.org/show_bug.cgi?id=645744
Using ClutterActor.get_transformed_size() can produce bugs if we
happen to position the box pointer when the source actor has a
relayout queued. Use our newly added reliable utility function
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=645744
Commit 31b12635d1 fixed links in notifications again, but blocked
clicks on normal labels getting through to the notification. Fix
this, so that both links and dismissing notifications work again.
https://bugzilla.gnome.org/show_bug.cgi?id=645839
Add a translator comment for the "Sorry, that didn't work. Please try
again." string, as suggested by several people; this should help
translators what "that" refers to.
As a stop-gap measure until we have a native input method tray icon,
add ibus-ui-gtk to STANDARD_TRAY_ICON_IMPLEMENTATIONS so that the IBus
status icon shows up in the status area rather than in the message
tray. The message tray location doesn't work for the function of
showing the current input method when switching between windows or
changing input methods.
https://bugzilla.gnome.org/show_bug.cgi?id=641531
StThemeNode.get_length() doesn't necessarily return an integer pixel
value, and our code produces non-integer positions in that case. So
round the spacing.
https://bugzilla.gnome.org/show_bug.cgi?id=645647
Because of the GtkSizeGroup-like trickiness we're doing with
PopupMenuItems, we need to force Clutter to discard its cached size
requests for them any time the menu itself changes size.
https://bugzilla.gnome.org/show_bug.cgi?id=645647
If the BoxPointer changes size (eg, when opening the "More" section of
the network menu), reposition it to make sure it's still aligned
correctly and still completely on-screen.
This is not the right fix for this problem (and causes the menu to be
drawn in the wrong position for one frame). The right fix would
involve a ClutterConstraint, but that would be more invasive, and can
happen post-3.0.0.
https://bugzilla.gnome.org/show_bug.cgi?id=645647
The change to make Notification an StButton (06d2c0af, bug 642978)
broke links, because the link actor would ignore the
button-press-event, allowing the notification actor to receive it and
get a pointer grab, and so the link actor would never see the
button-release-event. Fix that by accepting and discarding the
button-press-event.
https://bugzilla.gnome.org/show_bug.cgi?id=645613
The chat-history-fill-in code had logic to avoid appending two
messages when a message appeared in both the log and the pending
messages. But it wasn't working because of an incorrect object field
name.
Additionally, the code was previously keeping the copy of the message
from the log, and suppressing the copy from pending. But that meant
that once the previous bug was fixed, it would think it had only shown
old messages, and so it would create a source but not notify it. So
fix it to suppress the log message and show the pending message.
https://bugzilla.gnome.org/show_bug.cgi?id=645612
For wired devices (actually, ethernet devices), hide the connection
list when there is only one connection (either automatic or stored).
The device can be operated with the associated switch.
Since device state Unavailable is generic and has substates, instead
of using an hack for carrier, introduce some code that checks both
for carrier and firmware-missing when in that device state, and updates
the UI accordingly.
If a notification was updated while one of its widgets was focused,
it would lose the grab when that widget was destroyed. Fix that by
moving the focus to a safe place before destroying the old widgets.
https://bugzilla.gnome.org/show_bug.cgi?id=643687
We want to minimize focus stealing from the user. If a non-urgent notification
comes in while the user is interacting with the tray, we add it to the tray
and only show it after the user is done interacting with the tray. If an
urgent notification comes in while the user is interacting with the tray,
we hide the tray and show the urgent notification.
https://bugzilla.gnome.org/show_bug.cgi?id=636838
We want to allow the user to scroll through all notifications from
source by using a single scrollbar. We suppress the individual
scrollbars inside the notifications.
As one exception, we keep the original scrollbar for chat notifications
because it has a distinct look, ending above the text entry box.
https://bugzilla.gnome.org/show_bug.cgi?id=611611
Change the way menu items allocate their contents to take text
direction into account, so they're fully reversed in RTL locales,
and St.Align.START / END are respected.
https://bugzilla.gnome.org/show_bug.cgi?id=645524
While we have menu for an app icon open, we want to show the prelight
for the item instead of removing the prelight when the user mouses
away from the item and into the menu, and if there's a tooltip
(like for the dash), we want to show the tooltip immediately when
the menu is popped up.
https://bugzilla.gnome.org/show_bug.cgi?id=642871
It can be useful to avoid sending enter/leave events to the source actor
of a menu: this would be the case when the source actor isn't a menu item
that should participate in menu navigation but rather is some object
(like an app icon) that we want to indicate corresponds to the menu.
https://bugzilla.gnome.org/show_bug.cgi?id=642871
Inside the Shell, all the UI (including chrome, the overview, and
the actual windows) is not a child of the stage but of a special
ClutterGroup, which is cloned inside the magnifier.
Add function for setting this special actor so that actors added by
St are visible in the magnifier. Nothing yet uses this, but the
tooltip will soon.
https://bugzilla.gnome.org/show_bug.cgi?id=635100
We need to update WorkspacesView._ZoomOut before calling
_updateWorkspacesGeometry() in show(), as otherwise the old
value is kept. This was a problem if we previously left the
overview zoomed out.
The applications have to have a way of keeping resident notifications
updated without unnecessarily notifying the user with the information
the user is already seeing in the application window.
https://bugzilla.gnome.org/show_bug.cgi?id=630847
Make summary sources look more clickable and highlight them when selected.
Highlighting the fully expanded summary source when selected matches the
highlighting in the top bar items and teaches the user that any part of the
expanded summary source can be clicked.
Based on the initial patches by Florian Müllner and Jonathan Strander.
https://bugzilla.gnome.org/show_bug.cgi?id=644788
The lightbox will be sized to the size of its parent container,
so we need to make the parent container reliably the size of the
stage, instead of letting it be auto-sized to the size of its contents.
https://bugzilla.gnome.org/show_bug.cgi?id=644889
Returning true from the event handler seems to avoid getting
duplicate return events; these duplicate events likely are
getting generated by IBus.
https://bugzilla.gnome.org/show_bug.cgi?id=644509
Currently activating a window on a different workspace requires very
long drag distances, which is very inconvenient to use.
Fix that by allowing switching workspaces using the thumbnails which is
consistent with window and launcher dnd and much easier to use.
https://bugzilla.gnome.org/show_bug.cgi?id=643945
Don't do an individual hover fixup for every window overlay, instead
just use the new global.sync_hover() to fix up hovers once we have
finished showing the overview.
Based on a patch from Adel Gadllah <adel.gadllah@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=638613
Main._nWorkspacesChanged was racing with Main._checkWorkspaces.
If _checkWorkspaces won the race, _workspaces was uninitialized.
Because of this, _checkWorkspaces only noticed workspaces
with windows on them, leading it to believe the last workspace wasn't
empty, and added a new, empty workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=645343
In the case where the original actor is destroyed, we don't
show a snap back animation, so we need to destroy drag actor
as we would do in _onAnimationComplete.
https://bugzilla.gnome.org/show_bug.cgi?id=640781
If you have XFixes 5 (and corresponding xserver support) then we
add barriers on the panel and in the message tray corner so that
its easy to reach the corners even when there are monitors to the
sides of the primary monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=622655
If the user clicks a trayicon in the overview, drop out of the
overview before passing the click on to the icon. (We have to actually
wait for the overview animation to complete, in case the icon wants to
get a pointer grab, which it would not be able to do with the overview
active.)
https://bugzilla.gnome.org/show_bug.cgi?id=641853
If the pointer moves on or off the stage while another process has a
grab, we will lose track of it. One example of this is that if you use
a popup menu from a message tray trayicon, the tray will stay up after
the menu goes away, because the shell never saw the pointer leave it.
Add a new method shell_global_sync_pointer() that causes clutter to
recheck what actor is under the pointer and generate leave/enter
events if appropriate.
Of course, we can't actually tell for sure when another process has a
grab, so we need a heuristic of when to call this. Currently we call
it from Chrome._windowsRestacked(), which is not really the right
thing at all, but does fix the menu-from-trayicon case...
https://bugzilla.gnome.org/show_bug.cgi?id=630842
If the user clicks on the title of a trayicon's SummaryItem, forward
that click to the trayicon. Also adjust
gnome_shell_plugin_xevent_filter() so that if the trayicon takes a
grab as a result of this, we don't hide the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=630842
If you run a command from Alt+F2 that tries to get a server grab (eg,
xmag), it will fail if it starts up before the run dialog is finished
hiding.
Additionally, the run dialog currently stays focused while it is
fading out, potentially stealing keystrokes (or causing the user to
accidentally launch two copies of a program).
Change ModalDialog.close() to call popModal() immediately
Add a ModalDialog.popModal method, and call that before running the
RunDialog command. If the command succeeds, close the dialog as
before. If it fails, call ModalDialog.pushModal() to put things back
to normal before displaying the error.
https://bugzilla.gnome.org/show_bug.cgi?id=644857
When right-clicking on an AppWellIcon, the icon will become focused,
which (presumably via style-changed) invalidates its current
allocation, causing "icon.y" to return 0 until it has been
reallocated, messing up our idea of where in the AppDisplay the icon
is. Work around this by calling get_allocation_box() instead.
https://bugzilla.gnome.org/show_bug.cgi?id=645162
If there is a monitor to the right it is very easy to overshot the
expanding thumbnails and enter the next monitor. So, in that case
we just always show it.
https://bugzilla.gnome.org/show_bug.cgi?id=641877
Specify x-fill and y-fill true for the bin that contains the status
icon so the status icon will always be sized to our specified icon
size (24x24). This prevents pathological behavior for legacy status
icons embedded in the tray where an initial allocation at 1x1 before
they had content would "stick", and the icon would permanently
end up 1x1.
https://bugzilla.gnome.org/show_bug.cgi?id=634820
Right now, the user status menu always contains actions to logout
and lock the screen, and the user switching action only depends on
the technical availability of the functionality.
All those items should honor the lockdown settings defined in
org.gnome.desktop.lockdown.
https://bugzilla.gnome.org/show_bug.cgi?id=645335
To avoid having hot corners that accidentally trigger when e.g. trying
to hit the panel on the primary monitor we add hot corners only to
monitors that are "naturally" top left (top right for RTL).
For instance, we'd like a hot corner here:
corner -> +-------------
| |
+---------+ |
|=========| |
| | |
| | |
| | |
+---------+------------+
But not here:
unexpected hot corner
↓
+---------+-------+
|=========| |
| | |
| +-------+
+---------+
https://bugzilla.gnome.org/show_bug.cgi?id=645116
The fade effect when switching tabs should only be applied when
switching from a previously selected tab, not when selecting the
initial one - otherwise, the window previews are faded in the first
time the overview is shown.
https://bugzilla.gnome.org/show_bug.cgi?id=644389
When we were knocking off workspace height to fix the ratio problems, we
weren't adding spacing in between workspaces, so they smooshed up against
each other whenever we took height off, causing them to be visible.
Different methos are being used to launch the control-center panels of each
status icon. Standarize on Shell.AppSystem.
This also fixes the network icon using a non-existant Util.spawnDesktop()
method.
Bug #645091
Commit fcfd17e was overzealous when simplifying the previous spinner
animation, as a result the spinner now stays around when switching
to another application while the animation is ongoing.
If a workspace becomes empty due to a window changing to/from the
primary monitor, but not changing its original workspace then we
were not noticing this. This can happen for instance if you drag
a thumbnail window to a non-primary window.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
We clip the entire WorkspacesDisplay to its allocation to avoid things
like the WorkspaceThumbnails sticking out of the primary monitor into
another monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
We used to do this only on automatic workspace switch, but that
doesn't work for the multiple monitors case where we want to reserve
space on the extra monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
We create a Workspace with a null metaWorkspace for each
non-primary monitor, showing the windows on these monitors.
These are saved in WorkspaceView.extraWorkspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
This means a bunch of windows will not be visible at all in the overview.
Those will be added back with per-screen workspaces on the non-primary
monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
Notification was connecting to button-release-event to decide when to
be dismissed, which caused problems with widgets inside the
notification that reacted to button-press-event but not
button-release-event. Fix this by wrapping the Notification's table in
an StButton and connecting to 'click'.
https://bugzilla.gnome.org/show_bug.cgi?id=642978
In commit 9bd22dc0, I introduced an API to load an arbitrary
.desktop file, not necessarily from the menu path. It turns
out this function was broken because it created ShellApp instances
that were *different* from ones that were cached normally.
As far as I can tell, we didn't initially use it. Then later
Util.spawnDesktop was created which used this function.
Remove this broken function and all callers; if we're loading
.desktop files from *outside* the menu path, we can look at
readding.
This patch also kills off Util.spawnDesktop in favor of callers
talking to ShellAppSystem directly, now that the latter reports
errors.
https://bugzilla.gnome.org/show_bug.cgi?id=644402
Move the "system notification error" handling out of
util.js, and add it to ShellGlobal so we can start
calling it from across the codebase better (including
C).
https://bugzilla.gnome.org/show_bug.cgi?id=644402
Simplify the accounting of which windows we should dim by checking
the current state of windows rather than trying to track changes,
and by keeping a list of dimmed windows rather than a list of windows
with a dimmed parent. Remove windows from the list of dimmed windows
when they are destroyed.
This should fix problems where destroyed windows could end up in
the list of dimmed windows.
https://bugzilla.gnome.org/show_bug.cgi?id=644167
Adds an implementation of nm-applet in javascript. Uses the new
introspection from NetworkManager, and temporarily requires
nm-applet to be running for the secret service.
Features a renewed interface, with each device controllable through
a switch, which if toggled off disconnects, and if toggled on
connects to the most recently used valid connection. More esoteric
features like creation of ad-hoc networks have been moved to the
control center panel.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
Inside the inner loop, use the inner iterator, not that of the outer
loop. At the same time, refactor the code to rely less on private
properties appended to foreign objects.
https://bugzilla.gnome.org/show_bug.cgi?id=644858
The polkit authentication dialog contains logic for
falling back to dispalying a user's username if that
user has no real name.
This logic is no longer needed because gdmuser does it
internally now.
https://bugzilla.gnome.org/show_bug.cgi?id=644765
Commit 0207f1f29b landed a new
way of zooming, but was causing all sorts of window positioning
weirdness because the positions were supposed to be working against
a proportional workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=644542
Do a basic job of converting font sizes from pixels to points, so they
will scale will the global GNOME scale factor. Some other sizes that are
clearly related to the font sizes are changed to ems, but no comprehensive
attempt is made to get rid of px units.
https://bugzilla.gnome.org/show_bug.cgi?id=636868
During application startup, we used to display a rotating spinner
which also moved from left to right, revealing the application title.
The result looks rather busy, so remove the horizontal movement.
https://bugzilla.gnome.org/show_bug.cgi?id=640782
Update the Source title when an contact's alias changes, and
also also add a minor meta message like the current timestamps.
Updating the alias of a 'presenced' contact will overwrite the
current title, and it will also not update the summary item title
right now due to limitations of the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=642793
WorkspacesDisplay removes its dragMonitor in _dragEnd, but
this was never called in when a xdnd drag ended causing
dragMonitors to stack up and handling events multiple times.
Fix that by making sure that _dragEnd is called when xdnd ends.
https://bugzilla.gnome.org/show_bug.cgi?id=644642
Monkey-patch Date.prototype.toLocaleFormat() with a version that uses
g_date_time_format() since the Spidermonkey built-in can't handle
format strings with Unicode characters.
https://bugzilla.gnome.org/show_bug.cgi?id=643350
If we don't update every second, we may show the wrong time for up to
a minute on 1. resume; or 2. when changing the time; or 3. when
changing the timezone. This is both annoying and and leads to people
thinking that the tool for changing the time / timezone is broken.
https://bugzilla.gnome.org/show_bug.cgi?id=635840
Signed-off-by: David Zeuthen <davidz@redhat.com>
The mockups are here
https://live.gnome.org/GnomeShell/Design/Whiteboards/AuthorizationDialog
Detailed changes
- Don't use an icon for root
- For root, show Administrator in red
- Nuke icons for info and error messages
- Make error messages yellow
- Use 10pt size for error and message labels, not 12px
- Don't make the dialog change size when (single-line) error/info
messages appear
- Spacing fixes
- Show "Sorry, that didn't work. Please try again" if authentication fails
- Don't cancel the PolkitAgentSession if the session has already completed
https://bugzilla.gnome.org/show_bug.cgi?id=644737
Signed-off-by: David Zeuthen <davidz@redhat.com>
In the mockups the slider does not have an uniform color but uses
one color (shade of blue) to indicate the current value and one
to indicate "the rest" (shade of grey).
So adjust the slider to look like that to be closer to the look
in the mockups and thus to the design.
https://bugzilla.gnome.org/show_bug.cgi?id=644600
GJS complains when a NaN is passed in place of an integer, and
parseInt returns that from non numeric string. Pass a sentinel
that cancels the operation in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=642978
Around 2.91.90, gnome-session-save was renamed to gnome-session-quit.
This commit restores compatibility with the older gnome-session, for
those testing under GNOME 2.32 or below, by calling the DBus methods
directly.
https://bugzilla.gnome.org/show_bug.cgi?id=644591
Add the idea of an 'id' for a tab, and add a public switchTab method
so you can switch to 'applications' or 'windows'. This will be useful
for performance tests that test tab switching performance.
https://bugzilla.gnome.org/show_bug.cgi?id=644266
Add metrics:
overviewFps5Windows
overviewFps10Windows
overviewFps5Maximzed
overviewFps10Maximized
overviewFps5Alpha
overviewFps10Alpha
To have more numbers to show how performance varies with different
numbers of windows and different types of windows (maximized,
with an alpha channel.)
https://bugzilla.gnome.org/show_bug.cgi?id=644265
* Run gnome-shell-perf-helper during performance tests
* Use MUTTER_WM_CLASS_FILTER to omit all other windows
* Add new Scripting methods: createTestWindow,
waitTestWindows, destroyTestWindows
* Create a single 640x480 test window for testing overview
animation performance.
https://bugzilla.gnome.org/show_bug.cgi?id=644265
Don't enter the overview at startup, or when we we remove the
last window on the first workspace, but only when we remove a
workspace and there are windows on the other workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=644541
When new messages come in we want to scroll down so that the user
sees the incoming messages. The current implementation does not work
because it relies on a synchronous allocation hack which does not work
for unmapped notifications.
Fix that by connecting to adjustment::changed and scroll whenever the
adjustment changes which equals "new messages", "new timestamp" or
"presense change", but don't interference with the user's scroll actions
i.e when the user scrolls back to read something don't scroll to the bottom.
https://bugzilla.gnome.org/show_bug.cgi?id=614977
Remove the hack from Notification.scrollTo because it is unreliable,
the caller should make sure to call scrollTo when it will actually
have the desired effect.
https://bugzilla.gnome.org/show_bug.cgi?id=614977
If we're dragging a window around and we need to reposition the windows,
due to e.g. the sliding in of the thumbnails or some other reason, then we
need to consider the original position of the dragged window, rather than
the currend drag position. Otherwise we will unnecessarily rearrange the
other windows for instance on snap-back if you moved the dragged window
past some other window.
https://bugzilla.gnome.org/show_bug.cgi?id=643786
We currently show the workspace in the overview in a rectangle
with the same aspect ratio as the screen. Originally this was
probably done since it showed the desktop, but we don't do this
anymore, and the positioning of the windows in the overview is
strictly a grid, so its not in any way related to monitor geometry.
Additionally, in the multihead case the screen aspect ratio is
very different from the overview monitor geometry, so a lot of
space is lost.
So, instead we just fill the entire inner rectangle of the overview
with the workspace. However, the way the zoom into and out of the
workspace right now is by scaling the workspace so that it covers
the entire monitor. This cannot really work anymore when the workspace
is a different aspect ratio. Furthermore the coordinates of the
window clone actors are of two very different types in the "original
window" case and the "window in a slot case". One is screen relative,
the other is workspace relative. This makes it very hard to compute
the cost of window motion distance in computeWindowMotion.
In order to handle this we change the way workspace actor positioning
and scaling work. All workspace window clone actors are stored in
true screen coordingates, both the original window positions and the
in-a-slot ones. Global scaling of the workspace is never done, we
just reposition everything in both the initial zoom and when the
controls appear from the side.
There is one issue in the initial and final animations, which is that
the clip region we normally have for the workspacesView will limit the
animation of the clones to/from the original positions, so we disable
the clip region during these animations.
https://bugzilla.gnome.org/show_bug.cgi?id=643786
