There's only two uses of the parameter left, which can easily be added as a
separate line below. Since it's really a private interface meant for the
indicators, make it private as well so external users are less likely to
use it.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
To align the arrows, we need to allocate panel buttons the full
height of the tray. Fix up all of the panel buttons to support this,
and align the arrows in the middle.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
Swap out the implementation of SystemIndicator with a dummy,
and build the aggregate menu. At the same time, remove the
poweroff and login screen menus, as those were fake aggregate
menus beforehand.
We lose some flexibility as we lose session-mode-based menu
layout, but as each component of the aggregate menu is supposed
to be "smart" in response to updating itself when session
state changes, I believe it's better than a declarative model.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
We can't silently replace the old behavior of separate status
icons into a new system. Replace SystemStatusButton with a new
SystemIndicator class which will allow for the flexibility we
need. For now, make it a subclass of Button so that it mostly
feels the same, but we'll soon be swapping it out with a dummy
implementation that the aggregate menu will use.
I think the code cleanup here is worth it.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
This code is too complicated to keep, and the last straw came after the
fixed width menu in the aggregate menu design.
This will break some existing popup menus that rely on the fixed width,
but this will soon be replaced with the aggregate menu. We'll also soon
clean this up further by replacing PopupBaseMenuItem's custom layout code
with an StBoxLayout.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
Showing the new message at full size marks an abrubt change and looks
bad. Instead, gradually animate from 0px to full natural height.
Includes hacks to workaround flickering scrollbars while the animation
is in progress.
https://bugzilla.gnome.org/show_bug.cgi?id=687660
If that fails (which only ever happens in initial-setup mode, which
has no unlock or login dialog), we don't want to go ahead with
whatever we were doing.
https://bugzilla.gnome.org/show_bug.cgi?id=701848
If we don't remove the animation, we might leave a pending call
to _lockScreenShown() which would confuse our state tracking into
thinking we're active when we're not.
https://bugzilla.gnome.org/show_bug.cgi?id=700901
Using a signal handlers causes us to depend on connection order, but
we need the message tray code to run last, so it can notice that
notifications are destroyed when hiding the boxpointer and skip
the broken animation.
https://bugzilla.gnome.org/show_bug.cgi?id=686855
When we shift workspaces to create a blank one for a window or
application, all of the window actors are shifted down. However, some
of these window actors are transient windows attached to a main window.
When these windows are moved to a different workspace, the main window
is moved along with it. When the main window is moved, these windows
are also moved. This creates a double move of the windows.
This double movement leads to unexpected results where workspaces are
collapsed and windows are in incorrect positions.
This patch prevents movement of these transient windows, only grabbing
the main (ancestor) windows to move to a different workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=705174
Remove the Wi-Fi chooser from the menu and put it in a dialog instead.
This frees up the submenu to simply have three items: an rfkill toggle,
a button to show the dialog, and a button to show network settings.
Ideally, we'd autodetect the "needs network" case by user initiation
and automatically show the dialog if needed, but lower-level plumbing
is neccessary, so the menu item to show the dialog is an acceptable
compromise instead.
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Since the network section of the aggregate menu will be shown in the lock
screen, we need to ensure that users can't tweak with network settings or
anything like that.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Replace NMNetworkMenuItem with NMConnectionItem, based on
NMVPNConnectionItem, and replace NMDevice with NMConnectionSection
and NMConnectionDevice.
Since this rips apart NMDevice, and since wi-fi should not be
connection-based, we'll temporarily remove NMDeviceWireless. We'll
add it back in a later commit, along with the new Wi-Fi dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Instead, just add them after they're constructed. This allows us to
not have to pass the connections to each device, and prevents issues
with having to enumerate the connections in the middle of construction.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
Note that this does have an interesting side effect of not showing
network connectivity status on wired. This is intentional, and error
states will still be shown in the top bar when they happen.
This also means that if you're connected to both wired and wireless,
even though wired is the default route, we'll first notice the wireless
active connection, and we'll show that in the top bar. New NM API that
will help figuring out the active connection of the default device is
being implemented to stop this from happening.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
The code is complicated by requiring overflow, and in order to incrementally
improve the code to match the designs, remove overflow.
In the new design, we'll have a fixed number of menu items, and Wi-Fi
will be done by a separate design, so we can't be too concerned with
the menu not fitting on the screen.
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
According to Dan Williams, if firmware is installed the device
will disappear and reappear, and this is unlikely to change any
time soon. Just make our lives easier by removing the tracking.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
I intended to make a few code cleanups, but I apparently forgot
to hook up _updateAccessPoint. Merge it with _activeApChanged,
which is where the notify::active-access-point signal is actually
hooked up to.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
As we only reload search providers on startup or when the sort order changes,
and given the small number of search providers we'll actually load, I doubt
we'll see any speed decrease.
The simplicity of synchronous code is also much clearer, and fully avoids
all the possible bugs about in-flight requests or similar.
This also prevents issues with multiple search providers showing up at once,
which happen when multiple requests to reload search providers get called
immediately, with the existing in-flight async requests never cancelled.
https://bugzilla.gnome.org/show_bug.cgi?id=700283
When we reload the remote search providers, we currently try to remove
all remote providers, and then re-scan. It turns out that we sometimes
remove the wrong providers from the remote provider list, causing us to
have some providers not correctly unloaded.
https://bugzilla.gnome.org/show_bug.cgi?id=700283
Similar to our ClutterContainer monkey-patching, we can add some
convenience to existing ClutterLayoutManagers:
- hookup_style() to bind layoutManager properties to CSS properties
- child_set() to set child properties
https://bugzilla.gnome.org/show_bug.cgi?id=703905
Jasper removed the ShellGlobal:stage-input-mode property after its
"last" use was removed. Adapt the (hopefully) really last use of the
property to the recent input changes.
https://bugzilla.gnome.org/show_bug.cgi?id=704095
There's quite a bit of duplicated code between the login dialog
and the unlock dialog dealing with the various signals from the
ShellUserVerifier.
This commit moves that duplicated code into the AuthPrompt.
https://bugzilla.gnome.org/show_bug.cgi?id=704707
The point of fading the icon is to make the text displayed over the
icon more legible. In RTL layouts, the text is displayed on the left
of the icon, so fading the right-hand-side of the icon doesn't work
well.
https://bugzilla.gnome.org/show_bug.cgi?id=704583
This is a regression from splitting the slider out that never got fixed.
Restore the previous (useful) behavior by adding a public API to the
slider that lets us pass an event through.
https://bugzilla.gnome.org/show_bug.cgi?id=704368
We've long had the hasWorkspaces property, but it doesn't seem like
it was ever used. Implement it so that we don't have workspaces in
initial-setup mode.
Since it's difficult to make it change at runtime with a decent set
of semantics, and we never expect that to happen, don't bother
implementing it dynamically.
https://bugzilla.gnome.org/show_bug.cgi?id=698593
commit ea02380c15 made the login
screen stop using ModalDialog. It makes sense for the unlock
code to also stop using ModalDialog, too (for similar reasons).
Now that the login screen's auth prompt code has been separated
out, the unlock dialog can use it to get the buttons and spinners
etc, that it was previously getting from ModalDialog.
This commit drops the ModalDialog usage in the unlock dialog, and
makes the unlock dialog use GdmUtil.AuthPrompt instead.
https://bugzilla.gnome.org/show_bug.cgi?id=702308
