Commit Graph

8325 Commits

Author SHA1 Message Date
Florian Müllner
d1333cb249 status/network: Consider network-control action
NetworkManager installs a `network-control` polkit action that can
be used to disallow network configuration, except that we happily
ignore it. Add it to the conditions that turn a network section
insensitive.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1874>
2021-07-16 22:21:12 +00:00
Florian Müllner
d53285d71b status/network: Only list wifi networks that can be activated
Setting up a connection for an Enterprise WPA(2) encrypted wireless
network requires Settings. That's not available when windows are
disabled via the session mode, so filter out affected entries.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1874>
2021-07-16 22:21:12 +00:00
Florian Müllner
25793b9d97 status/network: Disable modem connection when windows aren't allowed
The item launches the corresponding Settings panel when activated, which
doesn't work when windows are disabled by the session mode. Rather than
failing silently, turn the item insensitive.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1874>
2021-07-16 22:21:12 +00:00
Alexander Mikhaylenko
b156cabdc9 swipeTracker: Use unaccelerated deltas
Unaccelerated deltas make sure the gesture works the same regardless of how
fast the fingers move; this is what we were already doing for scrolling.

Remove the swipe multiplier as the deltas already match scrolling other than
the 1/10 multiplier Clutter applies to scrolling specifically.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1763>
2021-07-16 19:37:20 +00:00
Florian Müllner
20d99c69cb search: Exclude hidden results from keynav
Since commit 3fb02843, we no longer skip allocation for
results that don't fit the width, and give them a 0x0
allocation instead.

That has the unintended side effect of those children now
being available to keynav. There are cases where we want
0-sized actors to be part of the focus chain (e.g. FocusTrap),
but this isn't one of them, so explicitly exclude 0-sized
children from keynav.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4470

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1916>
2021-07-15 19:15:36 +02:00
Florian Müllner
6995c2fa9f shellInfo: Don't destroy source on undo
Destroying the source from an action callback will result in the
notification being destroyed twice:

 - source.destroy() destroys all its notifications

 - a notification destroys itself after an action
   was activated

This results in unwanted log spam when attempting to dispose the
notification for a second time.

There is actually no good reason for destroying the source explicitly,
as sources already self-destruct with their last notification.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4457

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1908>
2021-07-13 12:38:51 +00:00
Florian Müllner
1f4eea12a5 messageTray: Always remove destroyed banners
Currently we only mark the banner as removed if it is destroyed
while in SHOWN or SHOWING state, but not if we're already HIDING
(for example in response to `NotificationBanner::done-displaying`).

If this happens, we'll try to destroy the notification again at
the end of the transition, which leads to (harmless but annoying)
log spam since Notifications were turned into GObjects (that are
disposed when destroyed).

Address this by always marking destroyed banners as removed, while
still only triggering a state update while shown (or in the process
of being shown).

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4457

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1908>
2021-07-13 12:38:51 +00:00
Florian Müllner
dc1aec5673 overviewControls: Fix warning on shutdown
ClutterActor unsets its layout manager's :container property during
dispose, so the corresponding vfunc should handle being passed NULL.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1909>
2021-07-08 23:17:01 +00:00
Florian Müllner
30e49cc3ca iconGrid: Disconnect signals on destroy
Otherwise the handler will trip over unset properties on an object
that is being disposed. Avoid the resulting log spam by disconnecting
the handler in question.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1909>
2021-07-08 23:17:01 +00:00
Florian Müllner
f51fb4bed0 ibusCandidatePopup: Use plain actor as dummy cursor
Now that source actors no longer have to be widgets, we can use
a plain actor for the dummy cursor and save a bit of overhead.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1903>
2021-06-29 22:47:58 +02:00
Florian Müllner
16d3718735 boxpointer: Handle non-widget source actors
There is no convincing reason why source actors must be widgets,
so lift that restriction.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1903>
2021-06-29 22:47:50 +02:00
Lee
006d206f98 Magnifier: Filter caret tracking in gnome magnifier
Add a check to filter out caret tracking events that result in a caret
location of 0,0.

Fixes #4177

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1823>
2021-06-28 21:28:10 +00:00
Florian Müllner
8430aa59da status/power: Always sync after creating proxy
Otherwise the menu remains in an inconsistent state in case of an
error, until something else triggers a call to _sync() (like a
settings change).

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4431

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1901>
2021-06-28 20:49:43 +00:00
Florian Müllner
9e9ed42263 status/power: Update to new coding style
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4431

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1901>
2021-06-28 20:49:43 +00:00
Carlos Garnacho
c449058d44 magnifier: Remove needless actor
For the pointer clone, we actually have 2 actors (one that contains
the sprite, another that moves around). These can just be the same.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1902>
2021-06-28 20:53:57 +02:00
Carlos Garnacho
3df4b5ec7c magnifier: Add method to enable/disable crosshairs
These do some some signals connection and monitor layout tracking
that we forget to disconnect when the magnifier is disconnected.
This causes warnings if enabling the magnifier, disabling it,
switching to another tty, and back. (Presumably also happens for
monitor hotplugs).

This signal should just stay connected as long as it's needed,
so add a setEnabled() method on the CrossHairs actor that we
can hook on the magnifier.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1902>
2021-06-28 20:53:36 +02:00
Carlos Garnacho
a363f1343a magnifier: Unset variable holding GSource ID
Otherwise we try to remove the no longer existing GSource
later on.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1902>
2021-06-28 19:54:07 +02:00
Florian Müllner
54a71944ba boxpointer: Disable unredirection while visible
Some popovers like the ibus candidate popover may be requested while
showing an unredirected fullscreen window. Disable unredirection
while the popover is visible so that it can actually be shown.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1900>
2021-06-28 12:07:12 +02:00
Georges Basile Stavracas Neto
f5259a5ce4 introspect: Allowlist GNOME portal
It too implements app listing and introspection, so list it in the allowlist.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1894>
2021-06-21 16:32:50 -03:00
Florian Müllner
158920924d shellDBus: Properly return from D-Bus methods
When implementing a D-Bus method synchronously, regular JS methods are
used. That is, whatever the method returns is passed as return value
to the method invocation.

However for asynchronous implementations, we need to explicitly return
a value to the invocation, otherwise the caller will wait until it times
out eventually.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1891>
2021-06-17 21:03:58 +00:00
Florian Müllner
6813e246cd shellDBus: Remove bogus return statements
g_dbus_method_invocation_return_value() doesn't have a return value.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1891>
2021-06-17 21:03:58 +00:00
Florian Müllner
c90fb27a2f shellDBus: Fix FocusApp()
The appDisplay used to be accessible via the viewSelector, but
that is gone now. Commit c09c070b15 adjusted the code, but the
replacement uses a Main.overview.appDisplay accessor that never
existed, whoops.

Fix this by exposing a new selectApp() method directly on the
overview, so we don't have to shuffle the appDisplay through
controls → overviewActor → overview.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1891>
2021-06-17 21:03:58 +00:00
Olivier Fourdan
8be5d33611 windowManager: Remove timeout on starting X11 services
With Xwayland started on demand, mutter/gnome-shell will spawn Xwayland
and GNOME settings daemon Xsettings.

Currently, gnome-shell uses a timeout of 5 seconds before canceling the
launch and declare failure to start X11 services.

While 5 seconds may seem like a lot of time, when this is executed on a
virtual machine part of a QA tests under load, this causes random
failures.

There is no good value here, we could increase the timeout but it will
always remain racy. Instead, remove the timeout, systemd itself already
has a timeout mechanism (with a much longer wait time).

Thanks to Benjamin Berg <bberg@redhat.com> for finding the root cause
and suggesting the fix.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1888>
2021-06-15 11:24:59 +02:00
Chris Mayo
8d042459ee lookingGlass: Use symbolic icons on the toolbar
Replace gtk-color-picker, a private GTK 3 icon, with
find-location-symbolic as used in GTK Inspector.

As suggested by Daniel van Vugt.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1671>
2021-06-14 18:51:30 +00:00
Harshad Gavali
177b36f82b overviewControls: Avoid hiding early AppDisplay when transitioning to Session
When transitioning from AppDisplay to Session,
AppDisplay should be visible throughout the transition.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4214

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1886>
2021-06-13 00:51:35 +02:00
Florian Müllner
5be67eb190 lookingGlass: Only pop modal after the transition
Right now we pop the modal immediately when closing, so the key-release
event of the Escape key ends up in the focus window which may consume it
for leaving fullscreen mode or similar.

We can avoid that in many cases by keeping the modal grab until the end
of the transition, as the key-release event will then likely occur while
the grab is still in place (provided animations are enabled).

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1880>
2021-06-10 00:18:00 +00:00
Daniel van Vugt
1879ca741e lookingGlass: Avoid a little bit of RedBorderEffect overdraw
The left edge of the box was redrawing the bottom left corner when
the bottom edge had already done so.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1876>
2021-06-09 16:31:19 +00:00
Daniel van Vugt
d8802aafc4 lookingGlass: Paint the RedBorderEffect right edge the correct height
It was being painted one box thickness (`width`) too tall so you could
see a rendering glitch below the bottom right corner until now.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1876>
2021-06-09 16:31:19 +00:00
Florian Müllner
dc0491ade8 dbusServices/screencast: Handle pipeline failures gracefully
If parsing the pipeline fails for some reason, we currently end up
with a zombie session that leads to a stuck recording indicator in
gnome-shell.

Instead, properly tear down the session to allow mutter and gnome-shell
to correctly update their state.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1878>
2021-06-09 15:21:35 +00:00
Georges Basile Stavracas Neto
40543bdd28 portal: Own org.gnome.Shell.Portal for the access portal
org.freedesktop.impl.portal.desktop.gnome will be used for the
GNOME implementation of desktop portals in the future, so make
sure GNOME Shell's implementation of the access portal won't
conflict.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1872>
2021-06-05 21:29:52 -03:00
Georges Basile Stavracas Neto
5339b1e6a2 dnd: Immediately start drag done by pointer devices
Unlike touch screens, pointer devices (e.g. cursor, touchpad) are
basically never used to switch app grid pages, which is the main
use case for the drag threshold. This point was recently raised
as design feedback.

Immediately start drags when using pointer devices.

See https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3802#note_1124701

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4287

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1866>
2021-05-31 10:59:11 -03:00
Georges Basile Stavracas Neto
e89c6179af dnd: Factor out calculation into a variable
Another trivial cleanup. This is in preparation for next commit, that
will expand on this if clause, and will make it a bit more complicated.
Using a variable here makes it easier to read.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1866>
2021-05-30 21:32:54 -03:00
Georges Basile Stavracas Neto
88fa02147e dnd: Return Clutter.EVENT_STOP instead of true
Trivial cleanup.

Clutter.EVENT_STOP is more semantic, and this 'true' is inconsistent
with the 'return Clutter.EVENT_PROPAGATE;' a few lines above.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1866>
2021-05-30 21:27:51 -03:00
Georges Basile Stavracas Neto
dfae3281b9 workspaceAnimation: Allow long swipes in session
As per design feedback, allow long swipes in the session too.

See https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3802#note_1124701

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1865>
2021-05-30 12:02:12 -03:00
Georges Basile Stavracas Neto
e9119c625d workspaceThumbnail: Destroy thumbnails on destruction
Often, when using multiple monitors, the thumbnails box may be
destroyed before the 'hidden' signal of the Overview is emitted,
which leaves a bunch of lingering signal connections to the
workspace manager.

Call this._destroyThumbnails() in the _onDestroy handler, which
disconnects from workspace manager. This fixes the some of the log
spam that GNOME Shell produces with backtraces of destroyed actors.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1860>
2021-05-25 12:43:32 -03:00
Olivier Fourdan
d9239e2cee windowManager: Ignore error without systemd
On systems/setups not using systemd, a failure to start gsd-xsettings
with NOT_SUPPORTED does not denote a failure to start Xwayland, just
that we're not using systemd.

In that case, we should just ignore the error, otherwise it will prevent
Xwayland to start on such systems/setups without systemd.

Thanks to Rose Kunkel (@rosekunkel) for spotting the issue/suggesting
the fix.

Fixes: 019229c40e - windowManager: Return failure to start X11 services
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4284
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1850>
2021-05-18 14:31:28 +00:00
Jonas Ådahl
08fb067d24 js: Get idle monitor from backend
Its ownership has moved from dangeling to owned by the backend, which
has reflected the API is accessible by. Adapt to this change.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1838>
2021-05-18 13:42:52 +00:00
Georges Basile Stavracas Neto
0ed1a363a3 workspacesView: Queue relayout when overview adjustment value change
The overview adjustment quite significantly impacts the layout of
SecondaryMonitorDisplay(), and this needs to be accounted for by queueing
a relayout.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1845>
2021-05-12 18:08:55 +00:00
Georges Basile Stavracas Neto
81210f5846 workspacesView: Don't update secondary monitor thumbnails box if hidden
And save quite a few C/JS trampolines. Since the thumbnails box may not
have up-to-date properties, call _updateThumbnailParams() right after
showing the thumbnails box.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1845>
2021-05-12 18:08:55 +00:00
Georges Basile Stavracas Neto
a63c44ba2c workspacesView: Increase secondary monitor workspace scale
The current value, 70%, may end up leaving too much unused space on
secondary monitors. The new value of 80% is completely based on trial
and error, but seems to work slightly better.

Closes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3820

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1845>
2021-05-12 18:08:55 +00:00
Florian Müllner
803b944ffd appDisplay: Add :gesture-modes property
Both the main app grid and folders got a swipe tracker, which is
active in both OVERVIEW and POPUP mode. The result is that two
trackers fight over the same events, and everybody loses.

Address this by adding a :gesture-modes property that determines
the allowed modes for the associated swipe tracker.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4256

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1844>
2021-05-12 01:02:19 +02:00
Carlos Garnacho
6fc93b78bc appDisplay: Improve app grid interaction for touch devices
Currently, handling of touch devices in the app grid is a bit awkward,
paging by dragging the view can only happen if started from the gaps
between icons, trying to drag from an icon will trigger DnD, and popping
up the menu takes over it all.

Instead, have the app grid actions play this game of rock-paper-scissors:
- Fast swipes on icons trigger scrolling, beats DnD and menu
- Slower press-and-drag on icons trigger DnD, beats scrolling and menu
- Long press triggers menu, beats scrolling, is beaten by DnD

This allows quick swipes to handle navigation, while still allowing the
fine grained operations. DnD, when triggered, dismisses the menu, if
shown.

This all could probably be nicer with a more stateful gesture framework,
we're not there yet though.

Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3849
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1774>
2021-05-11 16:13:49 +00:00
Carlos Garnacho
91a7978711 grabHelper: Propagate events while this._ignoreUntilRelease
Let these events to be handled as usual, so that the grabbing actor
can handle input differently (e.g. trigger DnD) while the grabHelper
is active.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1774>
2021-05-11 16:13:49 +00:00
Carlos Garnacho
ecead8c727 dnd: Add timeoutThreshold setting
This setting (by default, 0) sets a time threshold in order to allow
DnD. If the drag is shorter than this threshold, DnD will be cancelled,
and event handling left to the next handlers.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1774>
2021-05-11 16:13:49 +00:00
Sebastian Keller
0a7507c617 altTab: Avoid allocation cycle when showing CyclerHighlight
CyclerHighlight was showing and resizing one of its child widgets when
its own allocation was changed, queuing another relayout, resulting in
allocation cycle warnings. Avoid this by updating the size of the
highlight when the frame rect of window has changes rather than the size
of the CyclerHighlight actor itself.

Related: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4167
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1842>
2021-05-11 17:36:29 +02:00
Leleat
5423179844 switcherPopups: Correct selection with arrows and scrolling using RTL
The switcherPopups use _next() and _previous() to get the items
in the text direction. I. e. with LTR _next() gets the right item;
on RTL it gets the left item. This doesn't work well with RTL when using
the arrow keys since the text direction doesn't matter in those cases.
Pressing Left Arrow should still move left regardless of text direction.
So use the opposite methods.

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2547

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1835>
2021-05-11 14:09:33 +00:00
Olivier Fourdan
019229c40e windowManager: Return failure to start X11 services
If for some reason the xserver failed to start, mutter/gnome-shell
should not attempt to connect to the X11 display otherwise it will
lock up in XCB.

An indication of such a premature failure of the xserver is when the X11
services fail to start.

Return the status so that the caller can cancel the connection in time
and avoid the lockup of mutter/gnome-shell in case of failure.

This, however, makes the X11 services a critical component to start
Xwayland, meaning that a failure to start those services for any other
reason than the xserver failing to start would still prevent Xwayland
and therefore X11 clients to run in Wayland. This is however a lesser
issue than mutter/gnome-shell locking up.

This basically reverts commit a96753f0 - "windowManager: X11 can work
without gsd-xsettings".

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1837>
2021-05-11 14:05:40 +00:00
Florian Müllner
0ccdb4746f appDisplay: Extend faded edges beyond fade area
Now that the fade effect was reverted to the old behavior by default,
the app grid must opt-in extend faded edges beyond the regular fade
area.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1831>
2021-05-11 13:21:40 +00:00
Nishal Kulkarni
2b2a71832a windowManager: Hide overview on using hotkey
Change behavior on pressing Super+Number in Activities/Overview mode
so that the overview mode is hidden and application can be used.

This makes it consistent with clicking icon in the dash.

Closes: #4212
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1839>
2021-05-11 12:50:01 +00:00
Sebastian Keller
234024c4f4 workspace: Update WorkspaceLayout workarea on changes
Previously the workarea was only set on construction and then never
updated. As a result the preferred width and height as well as the
allocation were based on an outdated workarea size when it changed after
construction. This for example was happening during the startup
animation, for which the WorkspaceLayout is constructed before the panel
is shown. This caused the workspace in the overview to be slightly
smaller when it is first shown and the overview closing animation to
not expand the workspace to the correct size the first time it is
closed.

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3945
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3816

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1771>
2021-05-11 02:36:54 +02:00