There's only two uses of the parameter left, which can easily be added as a
separate line below. Since it's really a private interface meant for the
indicators, make it private as well so external users are less likely to
use it.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
To align the arrows, we need to allocate panel buttons the full
height of the tray. Fix up all of the panel buttons to support this,
and align the arrows in the middle.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
Swap out the implementation of SystemIndicator with a dummy,
and build the aggregate menu. At the same time, remove the
poweroff and login screen menus, as those were fake aggregate
menus beforehand.
We lose some flexibility as we lose session-mode-based menu
layout, but as each component of the aggregate menu is supposed
to be "smart" in response to updating itself when session
state changes, I believe it's better than a declarative model.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
We can't silently replace the old behavior of separate status
icons into a new system. Replace SystemStatusButton with a new
SystemIndicator class which will allow for the flexibility we
need. For now, make it a subclass of Button so that it mostly
feels the same, but we'll soon be swapping it out with a dummy
implementation that the aggregate menu will use.
I think the code cleanup here is worth it.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
This code is too complicated to keep, and the last straw came after the
fixed width menu in the aggregate menu design.
This will break some existing popup menus that rely on the fixed width,
but this will soon be replaced with the aggregate menu. We'll also soon
clean this up further by replacing PopupBaseMenuItem's custom layout code
with an StBoxLayout.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
Showing the new message at full size marks an abrubt change and looks
bad. Instead, gradually animate from 0px to full natural height.
Includes hacks to workaround flickering scrollbars while the animation
is in progress.
https://bugzilla.gnome.org/show_bug.cgi?id=687660
If that fails (which only ever happens in initial-setup mode, which
has no unlock or login dialog), we don't want to go ahead with
whatever we were doing.
https://bugzilla.gnome.org/show_bug.cgi?id=701848
If we don't remove the animation, we might leave a pending call
to _lockScreenShown() which would confuse our state tracking into
thinking we're active when we're not.
https://bugzilla.gnome.org/show_bug.cgi?id=700901
Using a signal handlers causes us to depend on connection order, but
we need the message tray code to run last, so it can notice that
notifications are destroyed when hiding the boxpointer and skip
the broken animation.
https://bugzilla.gnome.org/show_bug.cgi?id=686855
When we shift workspaces to create a blank one for a window or
application, all of the window actors are shifted down. However, some
of these window actors are transient windows attached to a main window.
When these windows are moved to a different workspace, the main window
is moved along with it. When the main window is moved, these windows
are also moved. This creates a double move of the windows.
This double movement leads to unexpected results where workspaces are
collapsed and windows are in incorrect positions.
This patch prevents movement of these transient windows, only grabbing
the main (ancestor) windows to move to a different workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=705174
Remove the Wi-Fi chooser from the menu and put it in a dialog instead.
This frees up the submenu to simply have three items: an rfkill toggle,
a button to show the dialog, and a button to show network settings.
Ideally, we'd autodetect the "needs network" case by user initiation
and automatically show the dialog if needed, but lower-level plumbing
is neccessary, so the menu item to show the dialog is an acceptable
compromise instead.
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Since the network section of the aggregate menu will be shown in the lock
screen, we need to ensure that users can't tweak with network settings or
anything like that.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Replace NMNetworkMenuItem with NMConnectionItem, based on
NMVPNConnectionItem, and replace NMDevice with NMConnectionSection
and NMConnectionDevice.
Since this rips apart NMDevice, and since wi-fi should not be
connection-based, we'll temporarily remove NMDeviceWireless. We'll
add it back in a later commit, along with the new Wi-Fi dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Instead, just add them after they're constructed. This allows us to
not have to pass the connections to each device, and prevents issues
with having to enumerate the connections in the middle of construction.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
Note that this does have an interesting side effect of not showing
network connectivity status on wired. This is intentional, and error
states will still be shown in the top bar when they happen.
This also means that if you're connected to both wired and wireless,
even though wired is the default route, we'll first notice the wireless
active connection, and we'll show that in the top bar. New NM API that
will help figuring out the active connection of the default device is
being implemented to stop this from happening.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
The code is complicated by requiring overflow, and in order to incrementally
improve the code to match the designs, remove overflow.
In the new design, we'll have a fixed number of menu items, and Wi-Fi
will be done by a separate design, so we can't be too concerned with
the menu not fitting on the screen.
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
According to Dan Williams, if firmware is installed the device
will disappear and reappear, and this is unlikely to change any
time soon. Just make our lives easier by removing the tracking.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
I intended to make a few code cleanups, but I apparently forgot
to hook up _updateAccessPoint. Merge it with _activeApChanged,
which is where the notify::active-access-point signal is actually
hooked up to.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
As we only reload search providers on startup or when the sort order changes,
and given the small number of search providers we'll actually load, I doubt
we'll see any speed decrease.
The simplicity of synchronous code is also much clearer, and fully avoids
all the possible bugs about in-flight requests or similar.
This also prevents issues with multiple search providers showing up at once,
which happen when multiple requests to reload search providers get called
immediately, with the existing in-flight async requests never cancelled.
https://bugzilla.gnome.org/show_bug.cgi?id=700283
When we reload the remote search providers, we currently try to remove
all remote providers, and then re-scan. It turns out that we sometimes
remove the wrong providers from the remote provider list, causing us to
have some providers not correctly unloaded.
https://bugzilla.gnome.org/show_bug.cgi?id=700283
Similar to our ClutterContainer monkey-patching, we can add some
convenience to existing ClutterLayoutManagers:
- hookup_style() to bind layoutManager properties to CSS properties
- child_set() to set child properties
https://bugzilla.gnome.org/show_bug.cgi?id=703905
Jasper removed the ShellGlobal:stage-input-mode property after its
"last" use was removed. Adapt the (hopefully) really last use of the
property to the recent input changes.
https://bugzilla.gnome.org/show_bug.cgi?id=704095
There's quite a bit of duplicated code between the login dialog
and the unlock dialog dealing with the various signals from the
ShellUserVerifier.
This commit moves that duplicated code into the AuthPrompt.
https://bugzilla.gnome.org/show_bug.cgi?id=704707
The point of fading the icon is to make the text displayed over the
icon more legible. In RTL layouts, the text is displayed on the left
of the icon, so fading the right-hand-side of the icon doesn't work
well.
https://bugzilla.gnome.org/show_bug.cgi?id=704583
This is a regression from splitting the slider out that never got fixed.
Restore the previous (useful) behavior by adding a public API to the
slider that lets us pass an event through.
https://bugzilla.gnome.org/show_bug.cgi?id=704368
We've long had the hasWorkspaces property, but it doesn't seem like
it was ever used. Implement it so that we don't have workspaces in
initial-setup mode.
Since it's difficult to make it change at runtime with a decent set
of semantics, and we never expect that to happen, don't bother
implementing it dynamically.
https://bugzilla.gnome.org/show_bug.cgi?id=698593
commit ea02380c15 made the login
screen stop using ModalDialog. It makes sense for the unlock
code to also stop using ModalDialog, too (for similar reasons).
Now that the login screen's auth prompt code has been separated
out, the unlock dialog can use it to get the buttons and spinners
etc, that it was previously getting from ModalDialog.
This commit drops the ModalDialog usage in the unlock dialog, and
makes the unlock dialog use GdmUtil.AuthPrompt instead.
https://bugzilla.gnome.org/show_bug.cgi?id=702308
Right now when a user types their password to unlock their session
we end up getting an unlock signal from GDM right away. We then
proceed to deactivate the screensaver before the user has a chance
to read his messages.
This commit makes sure we clear out the message queue before processing
the deactivation request.
https://bugzilla.gnome.org/show_bug.cgi?id=704347
logind sends out an "unlock" signal separately when
verification completes and we already listen for that,
so we don't need to unlock on verification-complete, too.
https://bugzilla.gnome.org/show_bug.cgi?id=704347
Add an option to limit the appSwitcher to the current workspace. For users
that use workspaces for task separation this more convient then current
behviour. While having to add an option is unfortunate there is no way to make
both groups happy as workspaces usage differes between different users / types
of users.
https://bugzilla.gnome.org/show_bug.cgi?id=703538
We need to make sure that we reset the opened submenu when we close the
submenu, not trick the toplevel into thinking a closed submenu is the
currently opened menu.
https://bugzilla.gnome.org/show_bug.cgi?id=704336
This way, if a parent is insensitive, all children will be, too.
Though PopupSubMenus will be forced closed, PopupMenuSection needs
the propagation.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
Doing it at the end has confusing semantics, especially as there is
this point where isOpen is true, but the corresponding open-state-changed
has not been emitted.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
Use ClutterActor.allocate_align_fill() so we don't have to do
this math ourselves. At the same time, clean up the RTL handling
so that it's easier to follow.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
It seems this behavior at one time was intentional, but I (along with
the designers) think it looks ugly having the menu having its insides
shrinking and shifting around while fading out of existence.
There's two cases where we currently explicitly try to animate the
submenu closed -- when an item is clicked inside the submenu, and
when the toplevel closes. This removes both of those.
The user expectation is that submenus will be closed the next time the
toplevel is open even if they were open before, so force submenus closed
when the toplevel finishes fading out, without any animation.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
As the aggregate menu will be built out of sections from each
of the menus, we need to ensure that activating an item in one
of these sections can close the main menu, even when it is not
a menu item. The new API also needs to be flexible enough to
ensure that animations can be controlled, like the buttons that
lock the screen or launch a new session.
Port the user menu to use this new API as well.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
A PanelMenuButton added to the top bar might not be visible at all
times. If it is hidden while the corresponding menu is open, we
currently don't do anything at all, e.g. the menu remains open
pointing to an arbitrary location in the top bar.
Instead, close the menu automatically in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=703540
The event catcher that covers the entire primary monitor during
transitions is currently inside a BoxLayout, relying in its
odd support for fixed position actors.
We already have a proper stack widget in place, move it there.
https://bugzilla.gnome.org/show_bug.cgi?id=703808
Currently lookingGlass relies on some odd BoxLayout behavior, which
allows children to use fixed positioning without affecting the parent's
size request. As this behavior is scheduled for removal, add the
looking glass dialog directly to Main.uiGroup.
https://bugzilla.gnome.org/show_bug.cgi?id=703808
The duality of the Clutter's key focus and mutter's window focus has long been
a problem for us in lots of case, and caused us to create large and complicated
hacks to get around the issue, including GrabHelper's focus grab model.
Instead of doing this, tie basic focus management into the core of gnome-shell,
instead of requiring complex "application-level" management to get it done
right.
Do this by making sure that only one of an actor or window can be focused at
the same time, and apply the appropriate logic to drop one or the other,
reactively.
Modals are considered a special case, as we grab all keyboard events, but at
the X level, the client window still has focus. Make sure to not do any input
synchronization when we have a modal.
At the same time, remove the FOCUSED input mode, as it's no longer necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
We can easily implement much of the same behavior ourselves by
keeping track of Clutter's focus events. Reintroduce heavily
modified FocusGrabber to do the work for us.
This will temporarily break when the user selects a window until
we can make gnome-shell automatically set the stage focus.
This also removes our only use of focus grabs, so remove those
as well.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
We can't assume "isActive implies isModal", so there is a risk
of pushing a modal that nothing else will ever pop, because we
take the early return and don't activate the user active watch.
https://bugzilla.gnome.org/show_bug.cgi?id=700901
_updateIcon should not attempt to sync any active connections, as the
icon-changed signal can be emitted in response to something done during
_syncActiveConnection. In the case of VPN, removeActiveConnection would
cause an icon-changed signal to be emitted immediately, but the state
would not be updated, causing us to call removeActiveConnection over and
over.
Explicitly sync all active connections when we know it needs to be done,
and simply make _updateIcon synchronize with the current device's icon.
https://bugzilla.gnome.org/show_bug.cgi?id=703565
This fixes a blue background being drawn when switching the monitors
configuration using hardware keys
(clone/multimonitor/external/internal).
The problem is that the shell gather all background loading requests
under the same meta_background_load_file_async call using one
GCancellable (the first one to come). So when the shell receives a
batch of 12 or so XRandr events, it creates 12 new background managers
which end up trying to load 12 times the same background picture. All
of these requests are batched into the same
meta_background_load_file_async using the first GCancellable received
on the first request. Unfortunately, when the first request is
cancelled by the following event indicating a new monitor setup, all
of the background picture requests are dropped on the floor, and
nothing gets loaded (hence the blue screen background).
https://bugzilla.gnome.org/show_bug.cgi?id=703001
It turns out that picking a 3200x1200 scene on notebook chipsets
every time the mouse is moved isn't exactly the fastest thing. Defer
picking to an idle to ensure that it won't get in the way of keeping
up with mouse events.
https://bugzilla.gnome.org/show_bug.cgi?id=703443
The code that checks for various conditions is confusing and
undercommented. It appears one of the recent refactorings
inadvertedly inverted the sense of the 'hidden mountpoint'
check, and caused autorun to not work for anything that does
not have a 'native root' - which is pretty much all volumes
implemented by gvfs.
https://bugzilla.gnome.org/show_bug.cgi?id=703418
Commit d6cace32 introduced a typo in the left/right arrow side
calculation code that causes in most scenarios (where the monitor
width is greater then the height) to not flip the box when it doesn't
fit inside the monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=703403
If the drag action ends after something else has put the screen shield
into a different state we can end up in an inconsistent screen shield
state where the whole thing is empty.
https://bugzilla.gnome.org/show_bug.cgi?id=703126
Commit 16fa186b63 attempted to fix the zoom animation problem
by throwing changes on the floor while the overview is animating. This has
the side effect that we might end up missing some positioning changes causes
windows to overlap the workspace thumbnails.
So revert those changes and fix it by simply by passing
WindowPositionFlags.ANIMATE during the overview animation.
This way the animation works as expected and we don't miss any position changes.
https://bugzilla.gnome.org/show_bug.cgi?id=703105
The top_window_group was introduced for popup windows that should
appear above system chrome, but as the group itself is just a child
of Main.uiGroup, chrome that is added after top_window_group will
still be stacked on top.
At least correct the stacking for actors added via addChrome().
https://bugzilla.gnome.org/show_bug.cgi?id=702338
The class is generally useful, so it only makes sense in panel.js
for historical reasons. Because other parts of the code are
using it, though, problems are cropping up that require a
workaround like:
placeSpinner: function(...) {
/* This is here because of recursive imports */
const Panel = imports.ui.panel;
Panel.AnimatedIcon(spinnerIcon, WORK_SPINNER_ICON_SIZE);
...
}
This commit moves AnimatedIcon to its own file so we can drop that
workaround.
https://bugzilla.gnome.org/show_bug.cgi?id=702818
When the osd window is hidden based on the timeout, it accidentally
left the timeout ID in place. When a subsequent switcher popup came
up, it thought the OSD window was scheduled to be hidden and tried
to re-hide the actor. This caused the tween to be run along with
an extra call to enable_unredirect_for_screen.
When the allocation of the workspacesView changes during the animation we override
the tween with one that does not animate causing the overview zoom animation
not to happen.
Fix that by ignoring the alloactionChanged notification during the overview
animation.
The code here before was trying to play hierarchy tricks to
figure out how to show / hide the events list, which broke
when we rearranged how the date menu was laid out. Simplify
the code here to not be so tricky, and update the CSS to
match the new designs.
https://bugzilla.gnome.org/show_bug.cgi?id=702849
The timestamp timeout specifies how long we should wait before
adding a timestamp to the notification. A timeout of one minute
ended up showing a lot of timestamps, so increase it to 3 minutes.
https://bugzilla.gnome.org/show_bug.cgi?id=687809
