When cancelling the PolkitAgent session before disconnecting the signal
handlers, we receive a "completed" signal where `gained_authorization`
is set to FALSE, which means we show an error message inside
`_onSessionCompleted()`.
This in turn means we show an error message every time we cancel a
session. In practice this wasn't really relevant so far since we only
destroyed the session when an actual error occurred before. Now that the
dialog supports empty passwords, we also call `_destroySession()` when
the user changes and no longer has a password set, and in this case we
want to cancel the current session without showing an error message.
So to fix this, disconnect the signal handlers before cancelling the
session, which makes sure we don't receive the last "completed" signal
in case we cancelled the session ourselves. This change also allows
removing `this._wasDismissed`.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/829
When a user has no password and a polkit authentication is started,
instead of blindly initiating the admin session, show the regular
"Authentication Requested" dialog (but without the password entry). This
makes sure that the user's admin session is only effectively started
after the user chooses to proceed with the authentication, which
provides an extra confirmation step that can be vital for critical
tasks.
To do this, we show the dialog inside `_onUserChanged()` right after the
dialog was created instead of calling `performAuthentication()` from
`_onInitiate()`. The bug mentioned in `_onInitiate()` is no longer an
issue since we show the dialog in all cases now anyway.
Ideally we should use a different wording than "authentication" when the
user has no password set, and use "confirmation" instead. However polkit
already sends the requests with such messages (e.g. "Authentication is
required to configure software repositories"), and it's important to
show those to the user, so this patch keeps the regular wording.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/829
Since `_destroySession()` is not only called before we try to initiate a
new authentication session with Polkit, but also when the dialog is
closed, it's currently possible that key focus is grabbed by the close
button after the dialog was dismissed and hidden. This is causing a bug
where after dismissing one of multiple queued dialogs, key focus goes
away and keyboard navigation with the new dialog is impossible.
Fix this by only resetting the UI of the dialog if the dialog is still
opened/visible at that point.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/828
Since ES5, trailing commas in arrays and object literals are valid.
We generally haven't used them so far, but they are actually a good
idea, as they make additions and removals in diffs much cleaner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
ES6 allows to omit property names where they match the name of the
assigned variable, which makes code less redunant and thus cleaner.
We will soon enforce that in our eslint rules, so make sure we use
the shorthand wherever possible.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
Clutter originally cluttered its namespace with key symbols, before
prefixing all symbols with KEY. We still use the unprefixed symbols
occasionally, replace them so mutter can drop the deprecated symbols.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/808
Since polkit takes a few milliseconds from initiating the session to
emitting the "request" signal, don't introduce visual distraction by
hiding the password entry and showing it again a few ms later.
So start a timeout of 200 ms when we destroy a session and if no session
request (i.e. a request for a password-authentication) happened during
this timeout, hide the password entry.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
Since we don't know if polkit/PAM will request a password (emitting the
"request" signal) or use another authentication method like a
fingerprint after the current authentication failed, hide the password
field and make the "Authenticate" button insensitive after cancelling
the session, just like we do when creating the dialog.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
Set the key focus to the password field only after we got a request
(and therefore know that a password is requested) instead of using
`setInitialKeyFocus()`. This way we don't try to focus the password
field by default if we aren't showing it (e.g. in case the user has no
password or is using fingerprint login).
Also we have to move the call to `grab_key_focus()` to happen after
`_ensureOpen()`, because otherwise the ModalDialog will set the focus to
one of the buttons while opening itself.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
Show the user avatar for all users, including the root user. The root
user will always have the generic avatar, but it looks more consistent
than showing no avatar at all.
This way we also don't have to worry about the spacing introduced by the
polkit-dialog-user-layout CSS class, which would give the
"Administrator" label a small offset to the left.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
Every since commit aa394754, StBoxLayout has supported ClutterActor's
expand/align properties in addition to the container-specific child
properties. Given that that's the only container left with a special
child meta, it's time to fully embrace the generic properties (and
eventually remove the child meta).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/780
Remove the `this.actor = ...` and `this.actor._delegate = this` patterns in most
of classes, by inheriting all the actor container classes.
Uses interfaces when needed for making sure that multiple classes will implement
some required methods or to avoid redefining the same code multiple times.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
As arrow functions have an implicit return value, an assignment of
this.foo = bar could have been intended as a this.foo === bar
comparison. To catch those errors, we will disallow these kinds
of assignments unless they are marked explicitly by an extra pair
of parentheses.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/731
We are currently inconsistent whether to put the operators in front
of the corresponding line or at the end of the preceding one. The
most dominant style for now is to put condition and first branch on
the same line, and then align the second branch:
let foo = condition ? fooValue
: notFooValue;
Unfortunately that's a style that eslint doesn't support, so to account
for it, our legacy configuration currently plainly ignores all indentation
in conditionals.
In order to drop that exception and not let messed up indentation slip
through, change all ternary operators to the non-legacy style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/725
Some more places where the indentation doesn't comply with either
the old or new style. They slipped through because the legacy eslint
configuration accounts for some patterns by plainly ignoring certain
nodes. We'll address that later, first fix up the indentation errors.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/725
We currently use no less than three different ways of indenting
object literals:
let obj1 = {
foo: 42,
bar: 23,
};
let obj2 = { foo: 42,
bar: 23 };
let obj3 = { foo: 42,
bar: 23
};
The first is the one we want to use everywhere eventually, while the
second is the most commonly used "legacy" style.
It is the third one that is most problematic, as it throws off eslint
fairly badly: It violates both the rule to have consistent line breaks
in braces as well as the indentation style of both regular and legacy
configurations.
Fortunately the third style was mostly used for tween parameters, so
is quite rare after the Tweener purge. Get rid of the remaining ones
to cut down on pre-existing eslint errors.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/716
While we aren't using those destructured variables, they are still useful
to document the meaning of those elements. We don't want eslint to keep
warning about them though, so mark them accordingly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
Those unused arguments aren't bugs - unbeknownst to eslint, they all
correspond to valid signal parameters - but they don't contribute
anything to clarity, so just remove them anyway.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
Braces are optional for single-line arrow functions, but there's a
subtle difference:
Without braces, the expression is implicitly used as return value; with
braces, the function returns nothing unless there's an explicit return.
We currently reflect that in our style by only omitting braces when the
function is expected to have a return value, but that's not very obvious,
not an important differentiation to make, and not easy to express in an
automatic rule.
So just omit braces consistently as mandated by gjs' coding style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
While we have some style inconsistencies - mostly regarding split lines,
i.e. aligning to the first arguments vs. a four-space indent - there are
a couple of places where the spacing is simply wrong. Fix those.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
We are currently inconsistent on whether case labels share the same
indentation level as the corresponding switch statement or not. gjs
goes with the default of no additional indentation, so go along with
that.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
We are currently inconsistent with whether or not to put a space
after catch clauses. While the predominant style is to omit it,
that's inconsistent with the style we use for any other statement.
There's not really a good reason to stick with it, so switch to
the style gjs/eslint default to.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/607
