In the case that we don't have an icon corresponding to the gicon, it's
more than likely that the code calling load_gicon will know more about
what it wants as a fallback than the texture-cache itself. In fact -
we had a whole lot of dead code that would try to fall back, but never
did because we always returned a valid actor.
This was causing certain applications with invalid icons to not get the
fallback icon because an icon couldn't be found. Fix up the one place
where we don't have an explicit fallback icon codepath, and then stop
doing what we were doing.
https://bugzilla.gnome.org/show_bug.cgi?id=671656
This assignment was shadowed by the giant switch above. Since the
switch has a comment or two explaining the logic inside of it,
keep that instead of the assignment.
Since the invoker for navigate_focus has an extra parameter, annotations
from the invoker aren't applied on the vfunc itself. Fix that by annotating
the vfunc separately.
In the workspace-collecting code we add a check to avoid collecting a
workspace if any startup sequence is running there. Since the sequence
can take some time to load, an helper function is also added which keeps
the (empty) workspace around for a very short time, while waiting for the
sequence to start.
https://bugzilla.gnome.org/show_bug.cgi?id=664202
If the user was inactive while a notification was shown, we show the summary
when the user becomes active again. This ensures that we inform the user of
the existance of new notifications that the user might have missed.
When the user comes back from away, the summary is now only shown if it has
new notifications.
https://bugzilla.gnome.org/show_bug.cgi?id=643014
ECal is deprecated and replaced by ECalClient. This has the
advantage of using e_utils to handle authentication, and should
fix NotOpened errors (that affect in particular webcal calendars
prior to evolution running)
https://bugzilla.gnome.org/show_bug.cgi?id=671177
This allows us to do directional keyboard navigation when there's no
actor inside the horizontal or vertical strip extending from the
origin actor but there are other actors to the sides of that strip
that could still be used as targets even if that means the focus would
move diagonally.
https://bugzilla.gnome.org/show_bug.cgi?id=663901
For arrow keys navigation, when moving from a widget which isn't a
descendant of the widget we are going to, it's unexpected that focus
moves to the target's first descendant instead of the closest to the
source widget.
This requires us to use absolute coordinates to compare widgets since
we no longer have the guarantee that the widgets we are comparing are
siblings.
https://bugzilla.gnome.org/show_bug.cgi?id=663901
Our DBus API (and mostly every other API in existence) define an
area as the top-left corner and width/height; glReadPixels on the
other hand uses the bottom-left corner, so we have to transform the
coordinates before passing them to GL.
https://bugzilla.gnome.org/show_bug.cgi?id=670979
When porting from st_container_get_children_list to this code, I accidentally
broke StTable by a copy/paste error. This broke notifications that updated,
leaving them with what they think were 0 columns and 0 rows.
https://bugzilla.gnome.org/show_bug.cgi?id=670640
* Add a keyring prompter based on GcrSystemPrompter
* Adds dependency on gcr version 3.3.5 or higher
* Not yet using unmerged support for non-pageable memory
https://bugzilla.gnome.org/show_bug.cgi?id=652459
The very similar clutter_actor_allocate_align_fill is close enough
that this is just needless duplication. Additionally, allocate_fill
already inverts the align if the text direction is RTL, so we don't
need to do that here.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
Now that StWidget is a group of sorts, it needs to account for its children
in its paint volume. Unfortunately, this causes havoc for StBoxLayout, so it
needs fixing - it's unknown why it worked when chaining up to near-identical
code in StContainer.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
The get_focus_chain() implementation in StWidget just returns all
children, it should filter for visible children instead. This
breaks keyboard navigation in various places since commit 72dad591
removed the correct implementation in StContainer.
https://bugzilla.gnome.org/show_bug.cgi?id=670904
Now that ClutterActor has a ClutterContainer implementation, we
can start removing StContainer. To help make this a bit more
understandable, instead of converting everything at once, make
StContainer a compatible API wrapper around the ClutterActor
implementation, and then we'll remove those wrappers in later
commits.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
Since an StWidget now has children, it needs to allocate those children
properly. Defer to the currently installed layout manager, like Clutter
does.
Now that we have something that allocates children in St, to prevent
double allocations, we use clutter_actor_set_allocation rather than
chaining up to StWidget::allocate.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
Now that StWidget is concrete and instantiable, we need to do something
other than return an adjusted 0 for width and height. Just chain up
to ClutterActor's default implementation, which uses the layout manager.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
Since we want to paint children by default in StWidget, we need to
provide a way for custom subclasses to paint their CSS backgrounds
without painting children... introducing st_widget_paint_background.
Additionally, remove any custom paint/pick handlers added by subclasses
of StWidget that just painted their children. This will cause double
painting if left alone.
This also removes the hacky things that some subclasses of StBin did
to prevent their one child to be painted by StBin.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
Clutter now provides two new properties on ClutterActor - first-child
and last-child, so we have notifiers on when they change. Unfortunately,
it still doesn't help us too much - we need to keep track of the previous
values of the properties so we can remove their pseudoclasses.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
We can't get rid of the implementations in StContainer just yet,
as StContainer still keeps its own child list. But this should
lower the amount of code that has to be moved around when we
remove StContainer.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
clutter_container_foreach is deprecated, so let's replace that
with some ClutterActorIter usage. Additionally, remove the checks
for ClutterContainer, as all ClutterActors are now ClutterContainers.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
Although not all "Finding and reminding" applications are ready
yet, the integration with gnome-documents' search results overlaps
enough with the "Recent Items" provider to justify its removal.
https://bugzilla.gnome.org/show_bug.cgi?id=670150
Empathy uses to support 2 D-Bus API for calls:
- StreamedMedia: legacy API
- Call.DRAFT: experimental version of the new API
Since 3.3.90, Empathy only supports Call1, the first stable version of the new
API, so the Shell should do the same.
https://bugzilla.gnome.org/show_bug.cgi?id=667694
The function may return FALSE without setting the GError, so don't
assume it is set to prevent a crash in that case. While at it, free
the GError we were leaking before.
https://bugzilla.gnome.org/show_bug.cgi?id=670418
When using systemd, polkit doesn't set the error even when returning false in g_initable_init
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
https://bugzilla.gnome.org/show_bug.cgi?id=670319
The handle was a child of the trough, but it was allocated and painted
like it was a child of the bar. This will wreak havoc when we port over
to the new Clutter API, so let's just make it a child of the bar.
https://bugzilla.gnome.org/show_bug.cgi?id=670034
When the operation is cancelled by NetworkManager, the request is
cancelled immediately. Later when gnome-keyring invokes the callback
notifying the error we must therefore not access its memory.
Previously the callback would mistakenly treat "cancelled" (which
indicates a programmatic cancel) as "denied" (which means the user
clicked "Cancel" on the keyring prompt)
https://bugzilla.gnome.org/show_bug.cgi?id=658484
VPN secrets are stored by the plugins, that provide separate
helpers for authentication. This commit adds the support for invoking
the binaries and pass them connection details.
For plugins that support it (as exposed by their keyfile), we invoke
them in "external-ui-mode" and expect a set of metadata about the
secrets which is used to build a shell styled dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=658484
ConsoleKit is being obsoleted by systemd. Accordingly port the CK logic
in the gnome-shell automount manager to systemd-logind APIs.
This makes use of systemd-logind's native C APIs which are much easier
to use than the D-Bus APIs in this case, and much faster too (since they
are synchronous and directly query the kernel for the information we
need). The dependency is compile time optional, and in order to be nice
to the Debian folks g-s compiled with this enabled fill automatically
fall back to CK support on systems lacking systemd.
A new tool, 'gnome-shell-extension-prefs' can load a new entry point from
extensions, 'prefs.js', which has an entry point to return a GTK+ widget.
This allows extensions to have their own preferences dialog, without each
extension needing to ship its own Python script and .desktop file.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
Clutter, since version 1.8, does The Right Thing™ inside the default
implementation of ClutterActor::map and ClutterActor::unmap, even for
non-container actors: it will iterate over the list of children and
map, or unmap, each one of them, respectively.
This means that the requirement to override map and unmap for composite
actors to map and unmap the internal children has been dropped.
https://bugzilla.gnome.org/show_bug.cgi?id=669239
Since our implementation of background-size is now CSS-compliant, we
do not need this subtexture hack that clips a "leak". The comment here
is also incorrect.
https://bugzilla.gnome.org/show_bug.cgi?id=633462
It seems that accidentally, two variables were swapped in one code path
of the background-size implementation, causing interesting but wrong
images for some elements.
https://bugzilla.gnome.org/show_bug.cgi?id=633462
Recent mutter changes made MetaShapedTexture not a ClutterTexture,
but instead a special ClutterActor subclass that implemented the texture-y
bits itself. Use recently introduced API in MetaShapedTexture so that we can
get the raw texture data and spit it out as a PNG.
Use the new meta_shaped_texture_get_image() to get a window's texture data.
meta_shaped_texture_get_image() flattens the image against any mask it may
have, so a screenshot of it should look exactly as it does on the display.
https://bugzilla.gnome.org/show_bug.cgi?id=662486
Instead of adding every rendered frame into the recording, drop frames
and only buffer and record enough frames to match the target framerate.
Increase the default frame rate from 15 to 30, since now that we're
actually enforcing framerate, it's noticeable that 15fps is not smooth.
https://bugzilla.gnome.org/show_bug.cgi?id=669066
The default pipeline was fairly aggressive about quality, and could
be too expensive for some computers. Decrease the quality setting for
the vp8 codec from 10 to 8, and increase the speed setting from 2 to 6.
(Basically, quality affects the visual fidelity of the end result, while
speed affects how much CPU the encoder uses to get a high compression
ratio at that quality level.)
Remove videorate from the pipeline, since the GStreamer VP8 encoder can
handle variable-framerate streams. This means that we won't spend CPU
encoding duplicate frames added by videorate.
https://bugzilla.gnome.org/show_bug.cgi?id=669066
We need to indicate that our GStreamer source produces timestamped
frames, instead of the default, which is to produce a stream of bytes.
This is needed for correctness, and to avoid warnings for some
pipelines.
https://bugzilla.gnome.org/show_bug.cgi?id=669066
For the Intel drivers, using glReadPixels() to read into client-memory
directly from the frame buffer is much slower than creating a pixel
buffer, copying into that, and then mapping that for reading. On other
drivers, the two approaches are likely to be similar in speed. Create
a ShellScreenGrabber abstraction that uses pixel buffers if available.
Use that for screenshots and screen recording.
https://bugzilla.gnome.org/show_bug.cgi?id=669065
Use the correct clip offsets when taking the screenshot of a window, to
exclude possible invisible borders and to include the case where the
window doesn't have any frame itself.
.desktop files have been designed for browsing, so the existing
fields often produce insufficient results when used for search.
gnome-control-center used X-GNOME-Keywords for that purpose, which
has now been standardized as Keywords. It makes sense for us to
support it in gnome-shell as well (and encourage its use outside
of settings panels).
https://bugzilla.gnome.org/show_bug.cgi?id=609702
It seems that Debian has their own prefixes in something like
debian-xterm.desktop. To properly do application matching in these cases,
we need to strip the debian- prefix.
https://bugzilla.gnome.org/show_bug.cgi?id=665647
Writting the screenshot to a file can take a relativly long time
in which we block the compositor, so do that part in a separate
thread to avoid the hang.
https://bugzilla.gnome.org/show_bug.cgi?id=652952
A new texture has undefined contents - when we're creating a shadow,
we need to clear the contents of the texture before drawing the border
and background into it.
https://bugzilla.gnome.org/show_bug.cgi?id=668048
g_dbus_method_invocation_return_value() adopts a floating reference,
so we don't also need to unreference it; fix by replacing the code
using a more compact form using the ^ convenience character in
GVariant type specifications. (Thanks to Ryan Lortie for the
suggestion.)
https://bugzilla.gnome.org/show_bug.cgi?id=667378
According to the GIO docs, sections can have labels too. We support
them by inserting a non reactive menu item at the beginning of the
section. This item is specially flagged to be ignored while processing
changed signals from the model (since it does not correspond to any
model item)
https://bugzilla.gnome.org/show_bug.cgi?id=666681
shell_embedded_window_hide() can be called during widget destruction,
after the associated ClutterActor has been already cleared out.
Fix a crash in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=633028
The application proxy is created asynchrously after the dbus name
is registed. This means that when tracking the first window (and
therefore creating the first window GActionGroup) there is no
app proxy yet.
https://bugzilla.gnome.org/show_bug.cgi?id=633028
Implement the background-size CSS property, specified by the CSS
Backgrounds and Borders Module Level 3, including the keywords
"contain", "cover", and fixed-size backgrounds.
https://bugzilla.gnome.org/show_bug.cgi?id=633462
It's not guaranteed that the application DBus proxy appears before
we receive the first focus event from the toplevel window.
Ensure that the first method to access the action muxer creates it if
hasn't been created yet.
We now have GRemoteActionGroup interface with the needed API,
implemented by GDBusActionGroup.
With the new API we could theoretically turn GActionMuxer itself into a
GRemoteActionGroup and expose the _full API to the shell so that the
timestamps could be passed from there.
Pass the current timestamp as platform data when activating
an action. This is implemented slightly hacky, since we use
clutter_get_current_event_time() to get at the timestamp, but
the alternative is to expose g_action_muxer_activate_action_full
to js, which would be quite a bit more involved.
GTK+ also exports window-specific actions, by putting the object path
for the exported action group in the _DBUS_OBJECT_PATH X property.
We add this action group to the app's muxer with a 'win' prefix,
since that is what the exported menu expects. Whenever the focus
window changes, we update the window-specific actions of its
application, and emit notify::action-group to cause the app
menu to be updated.
GDBusActionGroup api has changed again, adapt to that.
Also, use a GActionMuxer to add the 'app.' prefix to actions,
instead of manually stripping it out of the action names.
In the future, the muxer will also contain per-window actions
with a 'win.' prefix.
GMenuProxy has been replaced by GDBusMenuModel, and the object path
has been moved (now needs to be retrieved from the AppMenu GApplication
property).
Update the test to prefix each action with "app." as documented,
and use a GtkApplicationWindow instead of a plain GtkWindow.
Use the new GApplication support in ShellApp to create the application
menu. Supports plain (no state), boolean and double actions.
Includes a test application (as no other application uses GApplication
for actions)
https://bugzilla.gnome.org/show_bug.cgi?id=621203
GDBusActionGroup and GMenuProxy are new objects in GIO 2.32 that
help with accessing menus and actions of remote applications.
This patch makes it possible for the shell to associate an
application with a dbus name and from that a GMenu, that will
be shown as the application menu.
https://bugzilla.gnome.org/show_bug.cgi?id=621203
grid_width and grid_height were inverted, which caused a crash
in GdkPixbuf code. This was never noticed because the animation
in the panel is a square.
https://bugzilla.gnome.org/show_bug.cgi?id=666606
commit 5350302b09 dropped the possibility
to make a dbus name acquisition failure non-fatal.
Btw, it has also overriden the name in the error message.
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
Signed-off-by: Colin Walters <walters@verbum.org>
https://bugzilla.gnome.org/show_bug.cgi?id=663941
Rewrite code acquiring dbus names so that it uses GDBus, and rewrite
ShellDBus so that it is exposed on the GDBus connection. Ports of
the other objects will follow.
https://bugzilla.gnome.org/show_bug.cgi?id=648651
Not all desktop files tracked by the shell have
Exec lines. This could be because they're actually
run by another process, for instance, and the desktop
file is merely there to provide metadata. For example,
nautilus-pastebin provides a desktop file without an
Exec line.
The shell currently crashes if one of these partial
desktop files is installed and the user attempts to
search from the overview.
commit 37726a4cb6 fixed
a similar crasher.
This commit fixes the next one lower in the code.
https://bugzilla.gnome.org/show_bug.cgi?id=663815
Instead of saving the last_used_time per-app, grab the maximum time for all
windows. The logic is less hard to keep track of, and it solves some edge
case issues where windows that no longer exist update the user time, even
if none of the other windows have been used recently.
https://bugzilla.gnome.org/show_bug.cgi?id=660650
Allow push_modal to optionally only work with a keyboard only grab and
use that in altTab as a fallback to allow switching windows while a pointer grab
is in effect (like during DND operations).
https://bugzilla.gnome.org/show_bug.cgi?id=660457
For some reason, the texture cache decides to make a request and then look up
an icon in the icon theme. If it's valid, it just returns, fine, but if it
doesn't add the icon, it tries to undo the request, leaking an
AsyncTextureLoadData that isn't freed in the process.
https://bugzilla.gnome.org/show_bug.cgi?id=660968
Rather than have five or six structs allocated duplicating data,
just keep one and simplify the code considerably.
Again, part of my ongoing quest to merge St and Mx.
https://bugzilla.gnome.org/show_bug.cgi?id=660968
shell_global_get_memory_info tries to zero initialize the output
parameter with memset, but it passes the wrong size (because of
a missing *). There's no reason to do the memset, though. In the
normal case all members of the struct gets initialized before the
function returns anyway.
This commit drops the memset call in favor of one explicit 0 assignment
that only gets executed on on atypical platforms.
https://bugzilla.gnome.org/show_bug.cgi?id=662236
Without the desktop, even Nautilus hardcodes "Home" in all places
nowadays (except for the desktop itself). I think a run-time dependency
on nautilus being installed (GSettings will abort if the schema is not
found) is not worth it to keep compatibility with the desktop.
(Also, nautilus itself could probably hardcode "Home" for the desktop as
well and remove the preference).
https://bugzilla.gnome.org/show_bug.cgi?id=659895
If we add a 0-sized actor with a border-radius, we will crash as we try to
allocate a 0-sized texture in Cogl. Bail out early instead of doing that.
https://bugzilla.gnome.org/show_bug.cgi?id=661617
We originally OR'ed search terms and favored results which matched
multiple times to get more relevant results. When changing search
to AND search terms, the semantics of "multiple matches" were
changed to refer to a single term matching multiple criteria (name,
executable), which seemed like a good idea at the time.
However in practice this just results in applications whose
user-visible name matches the executable name on disk being
favored over applications using a more generic name, which
isn't too useful (in particular when taking usage frequency
into account).
https://bugzilla.gnome.org/show_bug.cgi?id=623372
Currently we use a very strict definition of "prefix", where the
search term has to match at the very beginning of the searched
criteria (application name, executable name). Use a more liberal
definition by including matches where the preceding character is
a space (application name) or hyphen (executable name) as well;
as many applications use a prefix, this should improve the quality
of results.
https://bugzilla.gnome.org/show_bug.cgi?id=623372
Application search results are internally categorized in four sets,
multiple and single prefix matches and multiple and single substring
matches. Each set is currently sorted alphabetically by application
name when concatenating the sets to the final result.
Change the last step to sort each set by usage frequency instead,
which is more likely to favor the most relevant match than
"arbitrary" alphabetic order.
https://bugzilla.gnome.org/show_bug.cgi?id=623372
Require that all terms match. This is the expected behaviour
and matches what gnome-contacts does. Keep the prefix/infix
weights in place for now.
https://bugzilla.gnome.org/show_bug.cgi?id=660912
Folks uses collection/set objects from libgee to store email addresses
associated with an individual. Unfortunately to extract addresses, parts
of libgee which are unusable from (introspected) bindings have to be
used[0], so add a helper method.
[0] in particular gee_iterator_get(), which is annotated as
"return: (transfer full): gpointer"
https://bugzilla.gnome.org/show_bug.cgi?id=660580
Match folks' name and nick fields, in addition to alias,
and look at email addresses in addition to im addresses.
This is more in line with what gnome-contacts does.
To match this new usage, rename the ALIAS_..._WEIGHT and
IM_..._WEIGHT constants to NAME_ and ADDR_, respectively.
https://bugzilla.gnome.org/show_bug.cgi?id=660580
The translate coordinates are calculated as the offset after the scale, so it
needs to be applied after the scale as well. This fixes random centering issues
in the UI.
https://bugzilla.gnome.org/show_bug.cgi?id=660674
For GIcons we use g_icon_to_string() in the key, but the function
will return NULL if the icon cannot be serialized. As a result,
all non-serializable GIcons of the same size end up with the same
cache key - an example for this are contacts with avatars, which
currently all end up with the same image.
To fix, opt out of caching for GIcons which cannot be serialized.
https://bugzilla.gnome.org/show_bug.cgi?id=660585
Setting up the framebuffers for transitions may fail, in which case
the material used for drawing is left uninitialized, so trying to
access it results in a crash.
Instead bail out in this case, which means that we won't paint
anything during the transition - still, drawing errors are better
than crashes ...
https://bugzilla.gnome.org/show_bug.cgi?id=659676
While we allow for arbitrary modifiers in keybindings, both the
alt-tab and ctrl-alt-tab popups close when ALT is not present in
the modifier mask, resulting in ALT being de-facto hardcoded.
Instead, pass the actual modifier mask when invoking the popups.
https://bugzilla.gnome.org/show_bug.cgi?id=645200
VPN secrets are currently unhandled by the UI code. To avoid
lengthy timeouts, bail out early with an error, so NetworkManager
falls back to the nm-applet agent directly.
https://bugzilla.gnome.org/show_bug.cgi?id=658484
Commit 0af108211c introduced a
regression where applications that appear in multiple categories were
duplicated in the "All Apps" list, because we switched from
uniquifying on desktop file ID to the GMenuTreeEntry.
Switch back to keeping the set of apps based on ID. To flesh this
out, we keep the ShellApp instance for a given ID around forever, and
when we're loading new contents, we replace the GMenuTreeEntry inside
the app. That means callers still get new data.
We still keep around the running app list, though we could just
recompute it from the app list now.
https://bugzilla.gnome.org/show_bug.cgi?id=659351
The apps and settings loading code duplicated the part to traverse a
GMenuTree. Unify this by adding a new function to return a flattened
set.
This will also be useful for a future change to how we store apps -
this way we can look at both the current set of apps and the new set.
https://bugzilla.gnome.org/show_bug.cgi?id=659351
Instead of doing complex computations in the shader just pass in the correct
fade area (taking padding, scrollbars and rtl into account) and just work
with that in the shader.
That fixes a bug where we would fade the scrollbar when padding is present.
https://bugzilla.gnome.org/show_bug.cgi?id=659159
The way the window dimmer shader is applied will cause rendering errors with
the rounded corners, invisible borders or shaped textures since it doesn't deal
well with the multitexturing used by the MetaShapedTexture. Use an off-screen
buffer to flatten the texture before being applied.
https://bugzilla.gnome.org/show_bug.cgi?id=659302
While I've been trying to make the GC kick in more often, I've decided
it's a better tradeoff to aggressively GC at "leisure", for multiple
reasons.
We can and should revisit this at a later time, but basically:
* The shell doesn't generate *that* much JS data - garbage collection
is very fast here.
* Long periods without GC mean we're not calling free() when we
could, which in turn makes heap fragmentation much worse.
* Ensuring the GC runs at idle makes it much less likely we'll take
a random large GC hit in the middle of an animation.
https://bugzilla.gnome.org/show_bug.cgi?id=659254
It was always taking the first .service.in file to create all .service
files: org.gnome.Shell.CalendarServer.service.in was the only one being
used.
https://bugzilla.gnome.org/show_bug.cgi?id=659194
Base ShellStack on StContainer rather than ClutterGroup, so that it
has StWidget-y features (and so we don't have to "cheat" in
shell_stack_allocate()). Implement navigate_focus() to only ever pass
focus into the top-most child, since doing otherwise would be
surprising.
https://bugzilla.gnome.org/show_bug.cgi?id=646934
The translation is taken from GTK+, so translations in the gnome-shell
domain are pointless - hide the string, so that it is not extracted
by xgettext.
In particular, document that you can ignore the get-preferred-*
signals if and only if you have a fixed width/height specified by some
other means.
https://bugzilla.gnome.org/show_bug.cgi?id=657986
This patch fixes the "apps vanish from alt-TAB bug".
If a "package system" rips away and possibly replaces .desktop files
at some random time, we have historically used inotify to detect this
and reread state (in a racy way, but...). In GNOME 2, this was
generally not too problematic because the menu widget was totally
separate from the list of windows - and the data they operate on was
disjoint as well.
In GNOME 3 we unify these, and this creates architectural problems
because the windows are tied to the app.
What this patch tries to do is, when rereading the application state,
if we have a running application, we keep that app around instead of
making a new instance. This ensures we preserve any state such as the
set of open windows.
This requires moving the running state into ShellAppSystem. Adjust
callers as necessary, and while we're at it drop the unused "contexts"
stuff.
This is just a somewhat quick band-aid; a REAL fix would require us
having low-level control over application installation. As long as
we're on top of random broken tar+wget wrappers, it will be gross.
A slight future improvement to this patch would add an explicit
"merge" between the old and new data. I think probably we always keep
around the ShellApp corresponding to a given ID, but replace its
GMenuTreeEntry.
https://bugzilla.gnome.org/show_bug.cgi?id=657990
This adds contacts search to shell, powered by libfolks.
Changes:
- Add Folks and Gee to the build system
- ShellContactSystem, a backend in C
- ContactDisplay, search frontend in JS
https://bugzilla.gnome.org/show_bug.cgi?id=643018
This commit introduces a "session type" for
gnome-shell. It essentially defines what
mode of operation the shell runs in
(normal-in-a-users-session mode, or at-the-login-screen mode).
Note this commit only lays the groundwork. Actually
looking at the key and appropriately differentiating
the UI will happen in subsequent commits.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
shell_global_get() currently implicitly instantiates the shell
global singleton the first time it's called. This means there's
no opportunity to set construction-time properties on the singleton.
This isn't an issue yet, because there aren't any. We will need it
in the future, though, when we grow a --gdm-mode that gets exposed as
a property through the global singleton.
This commit adds a new _shell_global_init() function that must be
invoked before shell_global_get() can be called.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
StAdjustment has some non-functional and unused animation vestiges
like the "elastic" property, st_adjustment_interpolate() and
st_adjustment_clamp().
This commit vacuums that stuff up so it doesn't tempt anyone into
trying to use it.
https://bugzilla.gnome.org/show_bug.cgi?id=657082
A network agent is a component that stores network secrets (like
wifi passwords) in the session keyring. This commit adds an
implementation of it to be used by the shell network dialogs. It
handles most of the keyring stuff, delegating the UI to upper layers.
https://bugzilla.gnome.org/show_bug.cgi?id=650244
Adds get_state() and ::state-changed signals, that replace connecting
and ready, as well as providing indication of when the object was closed
or the connection to PulseAudio failed.
https://bugzilla.gnome.org/show_bug.cgi?id=645708
During a state transition from running to not-running for
window-backend apps, it's possible we get a request for the icon.
Avoid asserting here and just return an empty image.
https://bugzilla.gnome.org/show_bug.cgi?id=656546
Adds methods to shell_global to allow taking screenshots
save the result into a specified png image.
It exposes three methods via shellDBus applications like
gnome-screenshot:
*) Screenshot (screenshots the whole screen)
*) ScreenshotWindow (screenshots the focused window)
*) ScreenshotArea (screenshots a specific area)
https://bugzilla.gnome.org/show_bug.cgi?id=652952
As danw points out,
"It's unique during the lifetime of the window, but reasonably likely to be
reused by another window after this one is destroyed. Using
meta_window_get_stable_sequence() might be better."
https://bugzilla.gnome.org/show_bug.cgi?id=648149
Since almost all of the callers of shell_app_activate were using the
default workspace (by passing -1), remove that parameter.
Add a new shell_app_activate_full() API which takes a workspace as
well as a timestamp; previously we might have been ignoring event
timestamps from elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=648149
This dramatically thins down and sanitizes the application code.
The ShellAppSystem changes in a number of ways:
* Preferences are special cased more explicitly; they aren't apps,
they're shortcuts for an app), and we don't have many of them, so
don't need e.g. the optimizations in ShellAppSystem for searching.
* get_app() changes to lookup_app() and returns null if an app isn't
found. The semantics where it tried to find the .desktop file
if we didn't know about it were just broken; I am pretty sure no
caller needs this, and if they do we'll fix them.
* ShellAppSystem maintains two indexes on apps (by desktop file id
and by GMenuTreeEntry), but is no longer in the business of
dealing with GMenuTree as far as hierarchy and categories go. That
is moved up into js/ui/appDisplay.js. Actually, it flattens both
apps and settings.
Also, ShellWindowTracker is now the sole reference-owner for
window-backed apps. We still do the weird "window:0x1234beef" id
for these apps, but a reference is not stored in ShellAppSystem.
The js/ui/appDisplay.js code is rewritten, and sucks a lot less.
Variable names are clearer:
_apps -> _appIcons
_filterApp -> _visibleApps
_filters -> _categoryBox
Similarly for function names. We no longer call (for every app) a
recursive lookup in GMenuTree to see if it's in a particular section
on every category switch; it's all cached.
NOTE - this intentionally reverts the incremental loading code from
commit 7813c5b93f. It's fast enough
here without that.
https://bugzilla.gnome.org/show_bug.cgi?id=648149
Add a helper function (mostly copied from gtkcalendar.c) for getting
the first week day for the current locale, using nl_langinfo if
available and falling back to the GTK+ gettext fallback otherwise.
Use that function in the calendar, so that the LC_TIME setting is
used if possible.
https://bugzilla.gnome.org/show_bug.cgi?id=649078
If a container is not clip-to-allocation, then its get_paint_volume()
needs to include the paint volumes of all of its children, since they
(or their children) may paint outside the container's allocation.
Also, if the superclass get_paint_volume() returns FALSE, then the
subclass should return FALSE too.
https://bugzilla.gnome.org/show_bug.cgi?id=655812
MetaPlugin wraps a bunch of compositor (and plain metacity) methods
that we can just call ourselves, so just do that. (Presumably this
dates back to some ancient time when it was imagined that plugins
wouldn't need access to the full metacity API.)
https://bugzilla.gnome.org/show_bug.cgi?id=654639
Rather than constantly asking mutter for the MetaScreen, and then
figuring out the MetaDisplay/Display/etc from there, just keep track
of everything we care about inside ShellGlobal.
https://bugzilla.gnome.org/show_bug.cgi?id=654639
When porting to the new gnome-menus API in commit 8f3bdd4f1, the
initial loading of settings apps was left out, so settings panels
are neither found nor can be launched from the top panel menus.
The js modules have so many imports back and forth that it's pretty
much guaranteed that if you import even one of them, you'll end up
importing all of them, including ui.status.bluetooth and
ui.status.network. So fix up the typelib include paths the same way
gnome-shell-jhbuild does, so we can find everything.
https://bugzilla.gnome.org/show_bug.cgi?id=650298
Clutter 1.7.x introduced CLUTTER_CAIRO_FORMAT_ARGB32: which can be used when
sharing textures/data with cairo without having to do check the
byte order and choose the appropriate format by hand.
https://bugzilla.gnome.org/show_bug.cgi?id=654577
Update the sample to be more up to date with respect to Shell practices,
and make it look a bit prettier. Additionally, change the file extract
code so that it's easier to update and add new files later.
https://bugzilla.gnome.org/show_bug.cgi?id=653206
Ideally, this would be an entirely-JS implementation, but we have a
couple of issues with gjs and gobject-introspection to work around, so
we need a ShellMountOperation class for the time being.
This first commit implements the show-processes dialog, with a system
modal style very similar to the EndSession dialog.
Implementations of ask-question and ask-password will follow shortly.
https://bugzilla.gnome.org/show_bug.cgi?id=653520
The sniffer is a simple helper process, activated as a DBus service,
that tries to crawl as many files as possible in the provided target
directory (i.e. the new mount's root), for a maximum amount of time -
which is set here to 1.5 seconds (i.e. it will crawl either all the
files in the directory tree, or as many as it can before the specified
timeout expires).
Crawled files are ordered by their content type, and a generic estimation
of the type of files composing the directory is returned to the caller,
using generic 'x-content/*' mimetypes.
The process will then set an autoquit timeout on itself, which can be
disabled by setting the env variable HOTPLUG_SNIFFER_PERSIST for
debugging purposes. The HOTPLUG_SNIFFER_DEBUG env variable can also be
set to enable debugging output.
https://bugzilla.gnome.org/show_bug.cgi?id=653520
==17386== 1,669 (88 direct, 1,581 indirect) bytes in 1 blocks are definitely lost in loss record 4,090 of 4,151
==17386== at 0x4C24AF4: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==17386== by 0x691B099: g_malloc0 (in /usr/lib/libglib-2.0.so.0.2800.8)
==17386== by 0x692006A: g_option_context_new (in /usr/lib/libglib-2.0.so.0.2800.8)
==17386== by 0x5124C57: meta_get_option_context (in /usr/lib/libmutter.so.0.0.0)
==17386== by 0x401D4F: main (in /usr/bin/gnome-shell)
https://bugzilla.gnome.org/show_bug.cgi?id=654269
The gconf keys used to restore GNOME aren't in a proper GNOME3 environment.
To mimic what GNOME3 gnome-session does would be extremely complicated, so
just launch the system gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=654527
The cogl path pads the corners out to the maximum corner radius to make the
math and painting logic easier. Unfortunately, when the radius exceeds the
actor's halfsize, the padding ends up interfering with other corners, creating
a big mess of rendering errors.
It'd be extremely complicated to fix this properly in the Cogl code,
so take the Cairo fallback.
https://bugzilla.gnome.org/show_bug.cgi?id=649513
Currently, any cases of overlapping corners were just ignored and rendered incorrectly.
Implement the corner overlap algorithm as specified by the W3C to fix this.
https://bugzilla.gnome.org/show_bug.cgi?id=649513
Unfortunately, gjs cannot handle binary C strings directly from
gobject-introspection. Add a simple workaround method in C to help
us save random files from the web.
https://bugzilla.gnome.org/show_bug.cgi?id=653989
Remove ShellGlobal's monitor-related methods, and have
Main.layoutManager provide that information instead. Move
Main._relayout() to LayoutManager, and have other objects connect to
the layout manager's 'monitors-changed' signal to know when the screen
geometry has changed.
https://bugzilla.gnome.org/show_bug.cgi?id=636963
shell_util_get_file_display_name_if_mount() uses a nautilus setting
to use a name for $HOME which is consistent with the file manager.
But while nautilus was ported to GSettings a while ago, we are still
trying to access the old GConf setting.
https://bugzilla.gnome.org/show_bug.cgi?id=653511
Only skip the areas of the scrollbars when they are invisible
and add take the horizontal scrollbar into account as well
when calculating the faded area.
https://bugzilla.gnome.org/show_bug.cgi?id=651866
jhbuild will default to srcdir != builddir in the future for various
reasons.
The enum generation rules were just broken and both did
cd $(srcdir) and $(addprefix $(srcdir)).
Also, remove an unnecessary $(addprefix) from the GIR sources; thanks
to Dan Winship for pointing out that make will look in both srcdir and
builddir, so it's not necessary to add a prefix explicitly. Doing so
breaks obviously when adding the sourcedir to a builddir file.
https://bugzilla.gnome.org/show_bug.cgi?id=653199
Using the list of stylesheets loaded with st_theme_load_stylesheet(),
one can build an StTheme that is completely identical to the previous
one, except for one property (application-stylesheet).
This allows rt and the user-theme extension to work while respecting
the theming of other extensions.
https://bugzilla.gnome.org/show_bug.cgi?id=650971
As the Shell does more than observing channels (users can interact with them),
it has to be an Handler as well. We have to make sure that all the new
incoming text channels are handled by the Shell by default, so we make it an
Approver as well.
From an user point of view, the only difference is that Empathy's tray icon
will stop blicking when receiving new channels.
We rely on ChannelDispatcher.DelegateChannels() and PresentChannel() to
interact with Empathy. Those methods have been implemented in
telepathy-mission-control 5.9.0 and telepathy-glib 0.15.0.
shell_global_get_memory_info() is a new function which extracts a few
global counters we have already, namely glibc's mallinfo, spidermonkey's
JSGC_BYTES, and gjs' counters for boxed/object/etc wrappers.
There is some slight overlap with perf; ultimately though I'd
like this function to do some more extensive analysis, so it wouldn't
be quite the same.
perf is going to be mainly concerned with how big the whole process
over time is; memory_info is for debugging memory leaks.
https://bugzilla.gnome.org/show_bug.cgi?id=650692
Theme authors now have the power (and responsibility) of creating fade
effects with the new CSS length property '-st-fade-offset'. A value of
0 disables the effect.
This new CSS approach replaces the current programmatic toggle of
the 'vfade' property. A new CSS style class name 'vfade' is used as
a replacement for the old property.
https://bugzilla.gnome.org/show_bug.cgi?id=651813
cogl_read_pixels() used to only support a useless pixel format, but it
will do our preferred format now, so use it rather than doing GL stuff
by hand.
https://bugzilla.gnome.org/show_bug.cgi?id=648758
Remove a workaround for clutter_actor_get_transformed_position() not
working inside paint(), and remove a comment about
ClutterText::position not being properly notified, since it is now.
(However, it doesn't seem worth it to rewrite the code to use
notification, since that would actually end up being more complicated
than the current solution.)
https://bugzilla.gnome.org/show_bug.cgi?id=648758
StScrollBar was tracking whether or not it currently had a valid
allocation, but since Clutter 1.4 there is a method it can call to get
that information instead.
https://bugzilla.gnome.org/show_bug.cgi?id=648758
A new envrionment variable GNOME_SHELL_ENABLE_CLEANUP is added which
causes us to attempt freeing global data. The reason this isn't
enabled by default is that it's a waste of time at best, and at
worst in corner cases could cause crashes which would fill up
crash databases. Better to leave it as a developer-only tool.
Start stubbing out some cleanup in ShellGlobal.
https://bugzilla.gnome.org/show_bug.cgi?id=649517
Move some more environment-initializationy stuff from main.js to
environment.js, and be more careful about not importing shell JS
modules until after the environment has been fully patched.
Change gnome-shell-plugin to call Environment.init() before
Main.start(); this means that Environment.init() now runs before any
shell JS modules (besides environment itself) have been imported.
Make run-js-test create a ShellGlobal and use its js_context, so that
the shell_global_set_property_mutable() stuff in Environment.init()
will work correctly in tests as well.
https://bugzilla.gnome.org/show_bug.cgi?id=649203
The tests were broken again, because since Shell-0.1.gir now has
'shared-library="libgnome-shell.so"', the references to Shell.PerfLog
ended up pulling in libgnome-shell in addition to the copy of
shell-perf-log.c that libjs-test was built with.
Fix all this hopefully forever by just making run-js-test link to
libgnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=649203
shell-global had become a dumping ground for functions that didn't
have anywhere else to be. Make shell-util the dumping ground instead,
and have shell-global only have methods that involve the ShellGlobal
object.
https://bugzilla.gnome.org/show_bug.cgi?id=648755
==13810== 11,360 bytes in 1 blocks are definitely lost in loss record 18,574 of 18,765
==13810== at 0x4005447: calloc (vg_replace_malloc.c:467)
==13810== by 0x5191882: standard_calloc (gmem.c:107)
==13810== by 0x51920A7: g_malloc0 (gmem.c:196)
==13810== by 0x4056201: blur_pixels (st-private.c:466)
==13810== by 0x40573B4: _st_create_shadow_cairo_pattern (st-private.c:710)
==13810== by 0x4070746: st_theme_node_paint (st-theme-node-drawing.c:856)
==13810== by 0x3FEFFFFF: ???
https://bugzilla.gnome.org/show_bug.cgi?id=649497
When activating an uninteresting window, the last_user_time isn't updated,
because we aren't tracking the window that the user_time gets updated on.
Hack around this by setting the last_user_time in shell_app_activate when
activating an uninteresting window.
https://bugzilla.gnome.org/show_bug.cgi?id=643302
When activating an uninteresting window, the last_user_time isn't updated,
because we aren't tracking the window that the user_time gets updated on.
Hack around this by setting the last_user_time in shell_app_activate when
activating an uninteresting window.
https://bugzilla.gnome.org/show_bug.cgi?id=643302
This property represents that the widget is being labelled by an
actor. The name is label-actor to avoid problems with the current
StButton:label and StTooltip:label
Before this change, we displayed dialogs on the monitor containing the
focused window if there was any, otherwise on monitor 0. We now use
the primary monitor rather than monitor 0 when no window has focus.
https://bugzilla.gnome.org/show_bug.cgi?id=648305
I unintentionally made .desktop->pid association "win" over
WM_CLASS. Fixing this makes the case of ancillary .desktop file
entry points (e.g. gnome-control-center's various shortcut .desktop
files) correctly show System Settings, and not whatever the shortcut
is.
In the future I'd like to have a way to say "this .desktop file
is a shortcut, ignore me" or something.
https://bugzilla.gnome.org/show_bug.cgi?id=646689
We weren't specifying _ALLOW_REPLACEMENT for anything except
org.gnome.Shell, which created a race - if the exiting process
didn't exit fast enough, the replacing process would fail
to get the name.
https://bugzilla.gnome.org/show_bug.cgi?id=646257
As a side effect of (see bug 642221), we no longer put docks or
transient windows into the hash table mapping windows to apps. The
"focused application" code relied on at least transients being in
there.
Fix this by calling the public API to map a window to an app, which
will at least follow transients. Whether we also want further
matching here (e.g. with window grouping) is another issue, but that
can happen as a different bug.
https://bugzilla.gnome.org/show_bug.cgi?id=647082
If a caller sets an StLabel's text to what it already is (as, eg, the
clock menu does), do nothing. Unless the label is editable, in which
case, setting the text has a visible side effect (dropping the
selection), so we don't optimize that out.
https://bugzilla.gnome.org/show_bug.cgi?id=645648
Add an uninstall-hook to undo the effect of install-exec-hook, and add
an $(AM_V_GEN) to the rule that copies either gnome-shell-real or
gnome-shell-jhbuild to gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=646730
If we're unmapped (or destroyed) during a scroll, we want to clean
up the changes we've made to Clutter's event handling, remove our
signal handler, and emit ::scroll-stop.
https://bugzilla.gnome.org/show_bug.cgi?id=646825
Adding correct annotations to Gio.File.load_contents revealed that gjs
doesn't actually support array+length combinations. For 3.0 this would
be invasive to fix, so add a method to ShellGlobal which does what
we need.
https://bugzilla.gnome.org/show_bug.cgi?id=646333
Add a function that gets the current allocation of an actor
transformed into stage coordinates. This avoids a misfeature of
clutter_actor_get_transformed_size() where when a size request is
queued (even if it won't eventually change the size), the returned
value is the transformed size request rather than the last allocation.
https://bugzilla.gnome.org/show_bug.cgi?id=645744
settings.menu was removed in gnome-menus commit
b68bcd27f44ce2c494f6e3cd9695890b9c02af04; gnomecc.menu is the intended
replacement.
(On Red Hat Linux derived systems, settings.menu continues to exist)
https://bugzilla.gnome.org/show_bug.cgi?id=645063
Previously (because I suck) we were ignoring the return value of
RequestName, and so we'd totally ignore the fact that we failed
to acquire the DBus name.
Make this consistent by using meta_get_replace_current_wm() and
if we're in --replace, actually replace immediately.
https://bugzilla.gnome.org/show_bug.cgi?id=645593
The next draft of the CSS Backgrounds and Borders module will actually
define when the blur radius means. Fix our code to use that definition
(2 * standard deviation) rather than using the 1.9 * that we extracted
from what Mozilla was doing.
https://bugzilla.gnome.org/show_bug.cgi?id=632506
Some functions in StTextureCache enforce square ClutterTextures,
even in cases where the underlying CoglTexture has a different
width:height ratio.
Add padding in those cases to keep the resulting image from being
stretched.
https://bugzilla.gnome.org/show_bug.cgi?id=643866
If, for example, the stage is divided into multiple monitors, we
might want to constrain tooltips so they don't cross monitor boundaries.
Add a function to set a per-stage callback to constrain tooltips.
https://bugzilla.gnome.org/show_bug.cgi?id=645547
Instead of showing tooltips immediately on hover, wait until a timeout
after the last motion (timeout is given by the gtk-tooltip-timeout
GtkSetting.)
https://bugzilla.gnome.org/show_bug.cgi?id=642871
Use ClutterContainer functions for adding the tooltip instead of
calling clutter_actor_set_parent behind the stage's back, and do
it inside st_widget_show_tooltip (which is a normal method) instead
of overriding st_tooltip_show, which is a vfunc and it is called
internally by Clutter, therefore it is limited in what it can safely
do.
Also, instead of positioning the tooltip with clutter_actor_set_position,
modify the anchor point when the associated widget moves, so that
only a redraw is queued.
https://bugzilla.gnome.org/show_bug.cgi?id=635100
Inside the Shell, all the UI (including chrome, the overview, and
the actual windows) is not a child of the stage but of a special
ClutterGroup, which is cloned inside the magnifier.
Add function for setting this special actor so that actors added by
St are visible in the magnifier. Nothing yet uses this, but the
tooltip will soon.
https://bugzilla.gnome.org/show_bug.cgi?id=635100
As of commit 34ce17c4b3, search results use large icons, or thumbnails
when available. To keep the amount of upscaling for the latter as small
as possible, request a large thumbnail size.
https://bugzilla.gnome.org/show_bug.cgi?id=645493
If you have XFixes 5 (and corresponding xserver support) then we
add barriers on the panel and in the message tray corner so that
its easy to reach the corners even when there are monitors to the
sides of the primary monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=622655
If the pointer moves on or off the stage while another process has a
grab, we will lose track of it. One example of this is that if you use
a popup menu from a message tray trayicon, the tray will stay up after
the menu goes away, because the shell never saw the pointer leave it.
Add a new method shell_global_sync_pointer() that causes clutter to
recheck what actor is under the pointer and generate leave/enter
events if appropriate.
Of course, we can't actually tell for sure when another process has a
grab, so we need a heuristic of when to call this. Currently we call
it from Chrome._windowsRestacked(), which is not really the right
thing at all, but does fix the menu-from-trayicon case...
https://bugzilla.gnome.org/show_bug.cgi?id=630842
If the user clicks on the title of a trayicon's SummaryItem, forward
that click to the trayicon. Also adjust
gnome_shell_plugin_xevent_filter() so that if the trayicon takes a
grab as a result of this, we don't hide the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=630842
StButton was mistakenly considering any Space/Enter KEY_RELEASE to be
a click, when in fact it should only count as a click if it also got
the corresponding KEY_PRESS as well. This meant that when typing in a
chat notification, any Space/Enter keypress would dismiss the
notification, since the StEntry would take the PRESS event but ignore
the RELEASE, allowing it to propagate to the notification itself,
which would treat it as a click.
https://bugzilla.gnome.org/show_bug.cgi?id=645243
Alt+F2 restart was failing after a rebuild when running from the
source tree because it would try to restart
".libs/lt-gnome-shell-real", which didn't exist yet. Fix this by using
"libtool --mode=execute" at build time to regenerate that file.
https://bugzilla.gnome.org/show_bug.cgi?id=645390
In commit 9bd22dc0, I introduced an API to load an arbitrary
.desktop file, not necessarily from the menu path. It turns
out this function was broken because it created ShellApp instances
that were *different* from ones that were cached normally.
As far as I can tell, we didn't initially use it. Then later
Util.spawnDesktop was created which used this function.
Remove this broken function and all callers; if we're loading
.desktop files from *outside* the menu path, we can look at
readding.
This patch also kills off Util.spawnDesktop in favor of callers
talking to ShellAppSystem directly, now that the latter reports
errors.
https://bugzilla.gnome.org/show_bug.cgi?id=644402
Move the "system notification error" handling out of
util.js, and add it to ShellGlobal so we can start
calling it from across the codebase better (including
C).
https://bugzilla.gnome.org/show_bug.cgi?id=644402
When jhbuilding, we use a jhbuilt gobject-introspection, so the
default typelib path is the jhbuild prefix, not /usr. So if we are
using NetworkManager from packages, we need to adjust GI_TYPELIB_PATH
to include it.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
Adds an implementation of nm-applet in javascript. Uses the new
introspection from NetworkManager, and temporarily requires
nm-applet to be running for the secret service.
Features a renewed interface, with each device controllable through
a switch, which if toggled off disconnects, and if toggled on
connects to the most recently used valid connection. More esoteric
features like creation of ad-hoc networks have been moved to the
control center panel.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
gdm_user_get_real_name() checks for an empty real
name and automatically falls back to username if
real name is NULL. It doesn't automatically fall
back to username if real name is empty, however.
This commit makes it fall back for both cases.
https://bugzilla.gnome.org/show_bug.cgi?id=644765
When we compare the boxes for two actors, they may appear to overlap
by a small amount because of floating-point imprecision. Allow for
up to 0.1 pixel overlap when determining what children are in the
focus direction from the currently focused actor.
https://bugzilla.gnome.org/show_bug.cgi?id=644134
If a process does not have any "interesting" windows, then it can't be
considered a running app. (Previously we were calling
get_app_for_window() before ruling out non-interesting windows, which
ended up calling _shell_app_new_for_window(), which would add the
window to the ShellApp directly, bypassing the is_interesting check.)
https://bugzilla.gnome.org/show_bug.cgi?id=642221
This is another workaround for the lack of gjs supporting array
arguments, this time wrapping tp_connection_upgrade_contacts to
add new features to the connection's self contact.
https://bugzilla.gnome.org/show_bug.cgi?id=642793
Monkey-patch Date.prototype.toLocaleFormat() with a version that uses
g_date_time_format() since the Spidermonkey built-in can't handle
format strings with Unicode characters.
https://bugzilla.gnome.org/show_bug.cgi?id=643350
clutter_init() fails under normal circumstances like
being unable to open a display connection, so it shouldn't
be handled with g_error() producing a core dump.
Clutter consistently produces an error message when
clutter_init() fails, so we don't need to print out any
error message.
https://bugzilla.gnome.org/show_bug.cgi?id=643910
The number instructions in a shader is limited to 64 on r300 hardware,
the fade shader in StScrollViewFade was ending up using 97 instructions
which is way over the limit.
So refactor the shader to use less instructions by precomputing as many
values as possible outside of the conditionals. The resulting shader
ends up using 34 instructions which is well within the hardware limits.
https://bugzilla.gnome.org/show_bug.cgi?id=644589
GThemedIcon expects the first name to be the most specific, and
will thus prefer it to later ones. We thus need to order the names
from the longer to the shorter.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
* Run gnome-shell-perf-helper during performance tests
* Use MUTTER_WM_CLASS_FILTER to omit all other windows
* Add new Scripting methods: createTestWindow,
waitTestWindows, destroyTestWindows
* Create a single 640x480 test window for testing overview
animation performance.
https://bugzilla.gnome.org/show_bug.cgi?id=644265
We need to connect to the NameOwnerChanged signal before we execute the
DConf binary. Refactor things so that we connect to the signal when
we first get the bus object. Split the code for waiting for a D-Bus
name into a wait_for_dbus_name() function for latter reuse.
https://bugzilla.gnome.org/show_bug.cgi?id=644265
When navigating from a non-immediate descendant of a container, we
were attempting to use clutter_actor_get_transformed_position() to get
the exact position of that actor relative to the container, but this
did not really make sense, since we would be using the position of
the intermediate container when navigating back.
https://bugzilla.gnome.org/show_bug.cgi?id=644134
g_themed_icon_new_with_default_fallbacks() does not do what we want
with symbolic icons; if the user's icon theme is not "gnome", then it
will end up preferring a non-symbolic icon from the higher-level theme
over a symbolic icon from gnome-icon-theme-symbolic.
If the shell requests a symbolic icon, and there is only a
non-symbolic icon available, that should be considered a programmer
error, just like requesting a non-existent icon name. So change the
code to only look up "-symbolic" names when drawing an
ST_ICON_SYMBOLIC icon.
https://bugzilla.gnome.org/show_bug.cgi?id=644142
* calendar-server subdirectory of build directory needs to
be created.
* Generate shell-enum-types.c/.h in build directory rather than
in the possibly-read-only source directory.
Build gnome-shell as a binary linked against libmutter-wm, instead of
a module to be loaded by libmutter-wm. Move the majority of
initialization-type stuff from gnome_shell_plugin_start() into main().
We still build libgnome-shell as a shared library, so that the linker
doesn't discard all the methods that are never called from C.
https://bugzilla.gnome.org/show_bug.cgi?id=641724
Add Ctrl-Alt-Tab support to ViewTab, and fix the Applications pane to
scroll to track the keyboard focus.
The Windows pane can be switched to, but navigation within the pane is
not yet implemented.
https://bugzilla.gnome.org/show_bug.cgi?id=618887
PopupMenuManager was pretending that it knew nothing about the menu's
sourceActors, while also trying to handle keynav between them. This
was a big mess, and resulted in bugs in navigation between panel menus
and the Activities button, and it totally gets in the way when trying
to add keynav to the dash (whose menu sources are arranged vertically
rather than horizontally).
Fix this up by moving the panel-specific parts to PanelMenuButton
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=641253
At times, RTL locales require different CSS, so always create theme
nodes with :ltr/:rtl pseudo classes depending on the widget's text
direction, to provide an easy way to handle those cases without
requiring a separate stylesheet.
https://bugzilla.gnome.org/show_bug.cgi?id=643835
Instead of defining rules manually, use the included make support,
which means Makefiles are less prone to API changes, support
verbosity correctly (instead of inconsistently hardcoding --quiet),
are cleaner to read, and emit GISCAN/GICOMP instead of GEN (which
is nicer).
https://bugzilla.gnome.org/show_bug.cgi?id=643371
The current gnome-shell.in script has a huge amount of
unnecessary complexity for the installed, normal case. Fix
this by adding a configure option (defaulting to false) that
installs a simple, obvious wrapper script around mutter.
We do change the gnome-shell build setup to pass this option
by default for jhbuild.
https://bugzilla.gnome.org/show_bug.cgi?id=642084
Unfortunately the evolution-data-server client-side libraries seem to
block the calling thread. This is a major problem as we must never
ever block the main thread (doing so causes animations to flicker
etc.). In the worst case, this problem causes login to hang (without
falling back to fall-back mode) and in the best case it slows down
login until a network connection is acquired.
Additionally, in order to sanely use these evolution-data-server
libraries, GConf has to be involved and GConf is not thread-safe. So
it's not really feasible just moving the code to a separate
thread. Therefore, move all calendar IO out of process and use a
simple (and private) D-Bus interface for the shell to communicate with
the out-of-process helper.
For simplification, remove existing in-process code since internal
interfaces have been slightly revised. This means that the shell is no
longer using any native code for drawing the calendar dropdown.
https://bugzilla.gnome.org/show_bug.cgi?id=641396
Signed-off-by: David Zeuthen <davidz@redhat.com>
See commit f2158218bef0c51 in mutter. Basically, we need
to grab org.freedesktop.Notifications before anything else
in the session gets started.
Note: I intentionally removed the Util.killall bits. I believe that
for notification-daemon at least, if we specify
DBUS_NAME_FLAG_REPLACE_EXISTING, we'll take over the name. Not sure
about notify-osd; if that's still a problem, then what we need to do
is add killing (and possibly respawning) of notify-osd to
"gnome-shell --replace", and not have it embedded randomly in a JS file.
https://bugzilla.gnome.org/show_bug.cgi?id=642666
gs-applications was introduced because we initially wanted a limited set
of categories, but this has now changed and we're back to categories
similar to the ones in the applications.menu from gnome-menus.
We can fix gnome-menus to have better categories, if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=641148
The vertical scrollbar is located on the left in RTL locales, so
pass an additional parameter to the shader which indicates the
locale's text direction.
https://bugzilla.gnome.org/show_bug.cgi?id=643156
In RTL locales, the vertical scrollbar should be located on the
left, so take the widget's text direction into account when
allocating the view's elements.
https://bugzilla.gnome.org/show_bug.cgi?id=643156
This allows PolicyKit applications to disambiguate between when the
authentication dialog is dismissed versus when authentication fails
(e.g. the wrong password has been entered).
See https://bugs.freedesktop.org/show_bug.cgi?id=30653 for more
information.
Signed-off-by: David Zeuthen <davidz@redhat.com>
A PolicyKit Authentication Agent is a construct used to authenticate
one or more identities. See the PolicyKit documentation for more
details on authentication agents and how PolicyKit works:
http://hal.freedesktop.org/docs/polkit/
Since gjs does not support subclassing a GObject class from Javascript
code, we bring in a native class to bridge the VFuncs to GObject
signals. Additionally, this native class also queues up authentication
requests so the user of the native class only has to deal with a
single outstanding request at any one time.
The file js/ui/polkitAuthenticationAgent.js introduces a singleton
that listens for authentication requests via the native class. This
singleton uses the PolkitAgent machinery to do the actual heavy-weight
lifting required for authentication (essentially a PAM conversation).
We currently don't allow the user to pick the identity to be
authenticated.
https://bugzilla.gnome.org/show_bug.cgi?id=642886
Signed-off-by: David Zeuthen <davidz@redhat.com>
When retrieving a ShellApp from the GHashTable of child processes,
we need to take an extra reference, that the GHashTable of windows
to apps will own.
Also add some documentation to avoid repeating this bug in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=642699
Using clutter_get_current_event_time can result into too old timestamps
when there is no current Clutter or Mutter event, since
clutter_get_current_event_time() returns the timestamp of the last event
delivered to Clutter. This can result in, for example, grabs failing. Use
the event time of the current event (if any) and CurrentTime otherwise.
https://bugzilla.gnome.org/show_bug.cgi?id=642188
Currently an entry's primary/secondary icon can only be set by
filename. In order to allow using themed icons, add API to set
a generic ClutterActor as icon.
https://bugzilla.gnome.org/show_bug.cgi?id=642333
For historical reasons, StEntry always did hover tracking when you had
visible hint_text, even if track_hover was FALSE. Remove that special
case, and make entries track hover just like all other widgets do.
If we actually needed to distinguish hovered-with-hint-text from
hovered-without-hint-text (which, at the moment, we don't), we could
do that by setting separate CSS for :hover and :hover:indeterminate.
https://bugzilla.gnome.org/show_bug.cgi?id=642483
Add the machinery to cancel the notification when a new playing a
new one (wrapping ca_context_cancel), then use it when scrolling
the status icon.
Not doing it for the slider because it causes noise, either with the
keyboard, with mouse drag or with mouse wheel.
https://bugzilla.gnome.org/show_bug.cgi?id=633667
If we aren't going to fill the content area of the node with a solid
background color, then we need to clear it of any artifacts left over
from drawing the border.
https://bugzilla.gnome.org/show_bug.cgi?id=640465
This reverts commit b4ec342d06.
The alpha > 0 checks should actually be alpha < 255 for the commit to
make sense as designed. The design isn't right either, though,
since we need to preserve the translucency in translucent gradients,
not block it with a solid color fill.
https://bugzilla.gnome.org/show_bug.cgi?id=640465
If a background gradient isn't fully opaque, then we need to first
fill in the background color so the border color doesn't leak into
the interior.
https://bugzilla.gnome.org/show_bug.cgi?id=640465
We need to be careful to ignore any preexisting color information
in the interior of the node when filling it with the background color,
since the border color may have leaked into the interior and the
background color may be translucent.
https://bugzilla.gnome.org/show_bug.cgi?id=640465
Some recent painting-efficiency fix broke the inspector, which
accidentally depended on things getting repainted too often, and so
was failing to highlight things properly now. A simple queue_redraw()
fixes this, but while I was there, I decided to port the drawing hook
to JS as well, since all the necessary parts of cogl work fine from
JS.
https://bugzilla.gnome.org/show_bug.cgi?id=642058
Built-in Xephyr support was an important debugging/development feature
for a while, but it is no longer especially useful (and has been
mostly broken since Clutter 1.4 anyway).
https://bugzilla.gnome.org/show_bug.cgi?id=610818
Point the arrow to the center of the sourceActor's content box, rather
than its allocation, in case it has asymmetric padding (as the
rightmost message tray summary item does).
https://bugzilla.gnome.org/show_bug.cgi?id=641728
With workspace thumbnails, we don't switch workspaces when dragging windows
between workspaces or adding new workspaces, so we also shouldn't switch
on launch.
* Add workspace parameters to shell_doc_system_open(),
shell_app_activate, shell_app_open_new_window()
* Pass a 'params' object when activating items in the overview with
two currently defined parameters: workspace and timestamp. (timestamp
is only implemented where it is easy and doesn't require interface
changes - using the global current timestamp for the shell is almost
always right or at least good enough.)
https://bugzilla.gnome.org/show_bug.cgi?id=640996
Launch child processes more directly; we retrieve the PID, and
use it to keep track of the .desktop file we launched.
Now, when we get a window, since the X window has a PID, we
have a pretty strong association.
.desktop file <-> PID <-> window
And can thus map window back to .desktop file.
https://bugzilla.gnome.org/show_bug.cgi?id=637745
For historical reasons, we had both StClickable and StButton, which
were nearly identical. StButton was more widely-used, so keep that and
port all StClickable users to that.
https://bugzilla.gnome.org/show_bug.cgi?id=640583
The material of prerendered backgrounds is now painted in the
rectangle determined by st_theme_node_get_paint_box(). As the
ClutterActorBox returned from that function includes the space
needed to draw the box shadow, the background ends up occluding
the shadow.
As the box shadow is not part of the background, factor out a new
helper function which excludes the box shadow, and use it to
prerender and place the background material.
https://bugzilla.gnome.org/show_bug.cgi?id=641522
1. Both functions leaked the nodes in priv->children
2. st_container_remove_all wasn't properly updating first_child and last_child
3. remove_all() is almost never right since it won't cause signal handlers
on the children to be removed. In the rare cases where it might be needed
the caller can simply use clutter_container_remove().
https://bugzilla.gnome.org/show_bug.cgi?id=640781
Due to recent GTK+ changes X11 specific code was moved into different
headers. As Socket/Plug is X11 only this broke our calls to GtkSocket
in the tray code. Fix this by including the new gtkx.h header.
Previously, trying to use a background image and border on
the same node resulted in the background drawing over the border.
This commit adds support for background images to
st_theme_node_render_background_with_border
and changes the code to call that function when appropriate.
https://bugzilla.gnome.org/show_bug.cgi?id=636976
Loading a pixbuf in a way that cairo can use it is a
pretty involved process that involves a lot of code, and pixel
fiddling.
This commit adds the mechanism to StTextureCache so we can reuse
the existing pixbuf handling code there, and also get caching.
https://bugzilla.gnome.org/show_bug.cgi?id=636976
A lot of the border drawing logic in st_theme_node_render_gradient is
applicable to other non-solid background types than gradients.
This commit refactors that code so that support for other non-solid
background types can be more easily integrated later.
https://bugzilla.gnome.org/show_bug.cgi?id=636976
When drawing the background image shadow, we need to clip it
to the node's background color, gradient, or borders if present.
If the background color is transparent, and there aren't any
borders, then we don't clip the shadow since there is nothing
to confine it.
https://bugzilla.gnome.org/show_bug.cgi?id=636976
The border_texture (and border_material) variable is being
overloaded for two purposes: it's used as a source
to 9-slice the border from, and it's used as place to prerender
the background and border together for gradients.
While we only do one or the other for any given node, the two cases
are distinct, and should use distinct variables for readability.
https://bugzilla.gnome.org/show_bug.cgi?id=636976
Currently, "-st-shadow" can mean one of three very
different things:
1) shadow based on alpha of the background image
2) shadow the "border box" of the node
3) shadow applied to the content of a StIcon
It isn't well defined which of the above 3 cases
-st-shadow will mean for any given node, however.
This commit splits the property into three
different properties, "box-shadow",
"-st-background-image-shadow", and "icon-shadow"
to make it all very explicit.
https://bugzilla.gnome.org/show_bug.cgi?id=636976
The vp8 codec provides better performance in pretty much all cases compared
to theora while still being free (as in not patent encumbered).
Also add a %T placeholder to the pipeline string which will be replaced
with the a thread count based on the target system.
https://bugzilla.gnome.org/show_bug.cgi?id=632595
StWidget reports a paint volume large enough to paint the current
theme node. As CSS transitions also paint the previous theme node,
the reported paint volume may be incorrect, resulting in screen
artifacts when painting outside the reported volume.
Add st_theme_node_transition_get_paint_box() to calculate an allocation
large enough to paint both theme nodes, and use it to report the correct
paint volume during transitions.
https://bugzilla.gnome.org/show_bug.cgi?id=640085
Right now is just redefine atk_object_get_name.
If someone wonders why not implement AtkText interface, or expose the
internal ClutterText, here a extract from AtkText doc:
"AtkText should be implemented by AtkObjects on behalf of widgets that
have text content which is either attributed or otherwise
non-trivial. AtkObjects whose text content is simple, unattributed,
and very brief may expose that content via atk_object_get_name
instead;"
StLabel is attributed, but is still simple and brief. In the same way
the atk_object_get_name redefinition is required, so this patch is the
first step. We can implement AtkText in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=626658
It includes:
* Expose a proper focusable state, instead of the default one from
cally, using StWidget::can_focus, and also notifying the state change
* Management of the selected stated, using the current pseudo_class.
* Defines a new virtual method on StWidget: get_accessible_type. In
this way it is not required to reimplement get_accessible just for
a accessible type change. get_accessible is reimplemented using this.
You can see that as a substitute of the atk object factory
https://bugzilla.gnome.org/show_bug.cgi?id=636716
This basically:
* Checks a11y configuration properties
* Checks if clutter has a11y enabled
* Loads atk-bridge
It also ensure proper NO_GAIL and NO_AT_BRIDGE values on gnome-shell
startup script
https://bugzilla.gnome.org/show_bug.cgi?id=612599
Instead of converting a CSS-specified length to an integer by truncation,
round. This means that sizes specified by converting a pixel value into
non-px terms will work reliably instead of potentially being off-by-one.
When changing a child's visibility with skip_paint(), the change
will not be visible until a redraw is triggered. Queue a redraw,
so that the function has an immediate effect.
https://bugzilla.gnome.org/show_bug.cgi?id=639461
If a starting-up app has not requested a particular workspace, then
shell_app_is_on_workspace() should return TRUE for any workspace.
Otherwise we will never get startup notification for them, since the
app menu only shows apps that are starting on the current workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=635089
With IBus, key events sometimes get sent to the server than
redelivered via gdk_event_put(). Since we expect all key events to
be delivered via the GDK event filter Mutter installs, this results
in key input not working.
To fix this, install an event handler with gdk_event_handler_set()
to intercept events being set from GDK to GTK+, pull out the
key events and send them back to Clutter.
Partially based on a patch by Daiki Ueno
https://bugzilla.gnome.org/show_bug.cgi?id=621659
Require that all extensions have a "shell-version" property in their
metadata, which is an array of supported Shell versions.
Extensions can target a specific version triple or an entire stable
version.
Optionally, they can also require a specific GJS version, to ensure
compatibility.
https://bugzilla.gnome.org/show_bug.cgi?id=639255
Synchronizing the actor and window position on paint resulted in lots
of syncing, and also resulted in the window mistakenly being left at
0,0 if the actor wasn't visible when the window first mapped.
Revert back to the old way of doing it, by tying into
clutter_actor_allocate, which was only failing before because of a bug
elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=635695
The gnome-panel allows the user to hover over a tasklist entry
while draging to activate a minimized or obscured window and drop onto it.
Implement a similar behaviour by allowing draging to the activities button or
the hotcorner (and thus opening the overview), which allows the user to
activate any window (even on different workspaces) as a drop target.
https://bugzilla.gnome.org/show_bug.cgi?id=601731
A key for 12hr/24hr clock format has been added to gsettings-desktop-schemas,
so use that instead of the one from the shell clock schema.
As the setting can be controlled from the Date and Time panel of
gnome-control-center now, drop the temporary preference dialog
as well.
https://bugzilla.gnome.org/show_bug.cgi?id=633200
Use the same approach as other generated headers (a temporary file,
compare to the existing, then copy), to avoid touching st.h, so
that other dependent objects are not rebuilt, if not needed.
It should speed up building when switching git branches, as often
config.status or automake are run, causing Makefiles to be recreated.
https://bugzilla.gnome.org/show_bug.cgi?id=638453
Thanks Owen and Colin for debugging this:
<davidz> does anyone have a clue about this cryptic error message: http://fpaste.org/aWgh/ ?
<owen> davidz: well, I'd guess some sort of syntax error...
<walters> hmm
possibly but unlikely fallout from my js versioning
<owen> oh, it's happening here too
walters: exactly
Adding --js-version=1.8 to the wrapper script fixes
walters: I thought you were defaulting to allowing extensions?
<walters> actually, let's do that now anyways
Signed-off-by: David Zeuthen <davidz@redhat.com>
We weren't freeing the whole pixbuf, nor were we the GList of
subpixbufs. Plug both of these leaks in the error handling path
and in the default case.
All of the unreffing/cleanup should happen in the GDestroyNotify
for the result, not some in the handler.
https://bugzilla.gnome.org/show_bug.cgi?id=636489
While non-uniform border widths were parsed correctly, an arbitrary
side's width was picked when painting, so that each border ended up
with the same width and the widths specified in CSS were ignored.
At least for sides between non-rounded corners, using a different
border width can be reasonable, for instance at screen edges.
Different border widths around rounded corners are kind of crack,
but then it would be lame not to support it ...
https://bugzilla.gnome.org/show_bug.cgi?id=607500
For gradient backgrounds, borders were implemented by filling the
background shape with the border color first, and then scaling down
the path to draw the background.
The result is not correct[0], which is especially visible if the border
width is greater than the border radius - so instead of scaling down
the original path, use a separate path for the background.
The result is consistent with the borders we draw for non-gradient
backgrounds, and much closer to the correct standard behavior.
[0] http://www.w3.org/TR/css3-background/#the-border-radiushttps://bugzilla.gnome.org/show_bug.cgi?id=607500
non-absolute paths specified as url()'s in
stylesheets are resolved to be relative to the location
of the stylesheets they are in.
Inline styles don't have physical styleshseets sitting on disk,
which leads to a crash in the url resolving code.
This commit ensures that we don't try to use the stylesheet associated
with a url, if there isn't one to use.
This commit doesn't try to handle relative paths in inline styles.
It only prevents crashes when absolute paths are used.
https://bugzilla.gnome.org/show_bug.cgi?id=636975
This prevents a race at start up that could prevent the user
from getting loaded properly.
In the near future we need to drop the gdm user code entirely
and switch to using the accountsservice library.
When scrolled, st_box_layout_apply_transform() includes the scroll
offset and affects paint volumes. This is right for our children, but
our paint volume is determined by our allocation and borders and
doesn't scroll, so we need to reverse-compensate, the same as we do
when painting.
https://bugzilla.gnome.org/show_bug.cgi?id=630932
In order to take advantage of clipped redraws (only redraw the
parts that actually changed), we have to inform clutter about
our paint_volume by implementing the get_paint_volume virtual
method.
As this feature had been added in in clutter 1.5.x we now require
that.
https://bugzilla.gnome.org/show_bug.cgi?id=630932
We were going to great effort to include the normal directories in the
GJS search path and the code to to do this broke recently when
jsdir and jsnativedir were moved to gjs-internals-1.0.pc. However, it
was actually unnecessary since the standard directories are appended
to the default path.
(We continue to use a GNOME_SHELL_JS envvar separate from GJS_PATH
for the Shell to enable the somewhat unlikely case where someone wants
to invoke the shell specifying a GJS_PATH.)
https://bugzilla.gnome.org/show_bug.cgi?id=635367
Aggressive compiler flags can cause the compiler to be smart enough
to inline functions and detect variables not being set on certain
code paths but not smart enough to understand the overall logic;
add some extra initializations to suppress the warnings.
Fix several minor bugs in the logic found when double checking the
logic before adding the initializations.
Based on a patch by Marc-Antoine Perennou <Marc-Antoine@Perennou.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=634225
At times it is desireable to hide actors from being picked even
with a mode of CLUTTER_PICK_ALL.
Currently we use a pattern of
clutter_actor_hide();
clutter_stage_get_actor_at_pos();
clutter_actor_show();
in these cases, which gets hideous if the actor we want to exclude
from the pick is located in another module.
A more elegant solution is to connect a handler to the ::pick signal,
which stops further emission.
Credit for the idea goes to Owen Taylor.
https://bugzilla.gnome.org/show_bug.cgi?id=634560
The code to draw the root background has now been moved into Mutter,
with added smarts to not draw obscured portions. Remove the old
version of the code and clone the Mutter background actor to draw
the background in the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=634836
We weren't actually referencing the ShellTrayIcon actors at all
on creation, but would unreference them when they were removed,
causing crashes.
When we reference the actors, use g_object_ref_sink() so that
memory management is consistent whether or not the actors are
subsequently added to a parent actor.
Thanks for Jon McCann for help in tracking this down.
https://bugzilla.gnome.org/show_bug.cgi?id=635141
Add a "gicon" property so that a GIcon can be used instead of an
icon name, while still getting icon recoloring from the theme.
Also include a compatibility wrapper in libshell until GJS has
support for interface static methods.
https://bugzilla.gnome.org/show_bug.cgi?id=622451
Connect to the "changed" signal on the default icon theme, and
when it triggers:
- Evict all cached looked up icons from the StTextureCache
- Fake a style change on all StThemeContext; this will result
in StIcon looking up icons again.
https://bugzilla.gnome.org/show_bug.cgi?id=633866
It is not referencing them when adding, and also it is connecting
to the "destroy" signal, emitted on dispose, so there is no risk
of storing finalized objects.
https://bugzilla.gnome.org/show_bug.cgi?id=634781
We were always drawing the border and background of each
StThemeNode, even if they were transparent. The simple
optimization of checking the alpha provides a significant
performance boost (in a quick test, it increased the
overviewFpsSubsequent metric in the core performance test
from 28fps to 35fps).
https://bugzilla.gnome.org/show_bug.cgi?id=634752
Now that we're using St.Icon in the Javascript, there is no reason
to have separate st_texture_cache_load_icon_name() and
st_texture_cache_load_icon_name_for_theme(), instead just add
the StThemeNode argument to st_texture_cache_load_icon_name().
https://bugzilla.gnome.org/show_bug.cgi?id=633866
Use st_texture_cache_load_icon_name_for_theme() so that we get the
right colors for symbolic icons. The code refactoring to achieve this
also avoids constantly starting a new icon load each time we set
a property on initialization ... the icon is loaded only after we
have a #StThemeNode assigned.
https://bugzilla.gnome.org/show_bug.cgi?id=633865
Sometimes it's useful to get the theme node if there is one and do
nothing and wait for the ::style-changed signal if there is no theme
node. Add st_widget_peek_theme_node() that just gets the current
theme node if available. The caller must handle a %NULL return.
https://bugzilla.gnome.org/show_bug.cgi?id=633865
Add st_texture_cache_load_icon_name_for_theme() which, when loading a
symbolic icon, gets a #StIconColors from the theme node and uses that
to colorize the icon.
https://bugzilla.gnome.org/show_bug.cgi?id=633865
A new StIconColors object is used to efficiently track the colors
we need to colorize a symbolic icon.
st_theme_node_compute_icon_colors() is added to compute the
StIconColors for a theme node. (Refcounting of StIconColors means
that we'll typically share the colors object of the parent node.)
https://bugzilla.gnome.org/show_bug.cgi?id=633865
Scaling up icons from the loaded size to a larger size is uniformly
ugly and results in a long series of "fuzzy icon" bugs. It's better
to just load at the specified size and center. (Centering can be
overridden by packing not-fill in the parent container.)
https://bugzilla.gnome.org/show_bug.cgi?id=633865
We don't want the layout to change when we say, change from
battery-full to battery-full-charging, so we should request a square
based on the icon size unconditionally and not try to adapt to the
size of the texture we loaded. This also means that our layout is
independent of the loaded texure which, if we switch away from
using a ClutterActor child will allow us not queue a relayout when
the icon finishes loading.
https://bugzilla.gnome.org/show_bug.cgi?id=633865
Make StIcon compile and work in St.
Changes:
* ::icon-type and st_icon_set_icon_type are added to allow
specifying SYMBOLIC/FULLCOLOR for an icon.
* Ability to set the icon name from the theme is removed; it
wouldn't easily fit into our framework and two levels of
abstraction between code and image doesn't seem that useful.
* size CSS property is renamed from x-st-icon-size to icon-size
to correspond to what we are doing elsewhere.
* CSS and property based icon sizing are cleanly layered - if
you set the icon-size property, the CSS size is ignored.
* Add a simple JS test of StIcon.
https://bugzilla.gnome.org/show_bug.cgi?id=633865
StIconType will be used by a new StIcon class, so move it to the
header file of common enumerations. Including st-types.h which had
the St single-include check revealed that st-texture-cache.h didn't
have that check and several places were including that directly.
Fix that up.
https://bugzilla.gnome.org/show_bug.cgi?id=633865
The ability to set a "content image" on an icon relies on the ability
to have custom theme properties of a "border image" (9-slice) type.
We don't have this, and the capability of a bordered image specified
by the theme can be achieved more naturally with standard CSS facilities.
https://bugzilla.gnome.org/show_bug.cgi?id=633865
ST makes use of GTK+ for input methods and for icon themes; therefore
we have need to initialize GTK+ in order to test these parts of Clutter.
Instead of LD_PRELOADING our module, use a separately compiled executable
that links to the UI components in GNOME Shell, initializes Clutter and
GTK+ and hooks them together.
Getting all the symbols from St and the GUI components exported for
use via GJS requires a bit of contortion: we need to actually link the
St convenience library into a shared library and link the executable
to that since there is no way with libtool to take a convenience library
and put all its symbols into an executable --whole-archive style.
https://bugzilla.gnome.org/show_bug.cgi?id=633657
* Make sure all source files have a LGPL copyright header, and standardize
non-standard variations of the header to a common form.
* Check and update all copyright notices.
* Remove 'Written By:' lines. They are universally incomplete and
typically indicate only who started a particular file.
https://bugzilla.gnome.org/show_bug.cgi?id=634550
We weren't properly nulling out the vadjustment variable in dispose()
which meant in the case of explicit-destroy followed some time later
by garbage collection and disposing the actor again we would crash.
Use StWidget:track-hover rather than doing it ourselves. Don't assume
that hover is always TRUE after an enter_event or FALSE after a
leave_event, since we have a pointer grab and will be getting other
actors' events.
Don't ungrab the pointer when it leaves the button, since that
destroys the whole point of getting a grab in the first place.
Only consider the button to have been clicked when it has both grab
(meaning the mouse was pressed over the button) and hover (meaning the
mouse was released over the button).
Also remove the virtual pressed/released methods, which weren't being
used anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=633853
Like all X API, XFixesGetCursorImage returns arrays of 32-bit
quantities as arrays of long; on 64-bit systems we need to
convert to an array of 32-bit words before creating a texture
from the result.
https://bugzilla.gnome.org/show_bug.cgi?id=633591
Add StWidget:can-focus, st_widget_navigate_focus(), and
st_container_get_focus_chain(), and implement as needed to allow
keyboard navigation of widgets.
https://bugzilla.gnome.org/show_bug.cgi?id=621671
In d66e7dd49 I got confused between border_texture and
background_texture. The background_texture was being created as normal
but in the one place that it gets drawn I accidentally made it use the
border_material instead. This patch makes it create a
background_material similar to the border_material and uses it to
paint.
A few places in st-theme-node-drawing create one-shot material, paint
with it and then free it. This is suboptimal with current Cogl because
it will end up compiling an ARBfp program just for that single paint
and then it will throw it away when the material is destroyed.
There is a new function in st-private.c called
_st_create_texture_material. This creates a simple material for a
texture based on a common parent material that points to a dummy
texture. Any materials created with this function are likely to be
able to share the same program unless the material is further modified
to contain a different number of layers. It would be possible to use
cogl_set_source_texture for this instead except that it's not possible
to modify the material's color in that case so we couldn't render the
texture with opacity.
The corner textures are now stored as a handle to a material that
references the texture rather than storing the texure directly. There
is also a separate border_material member which always points to
border_texture as the only layer.
https://bugzilla.gnome.org/show_bug.cgi?id=633340
Plugging the GtkSocket icon can fail, in which case NaTrayManager emits
tray-icon-removed but the icon has never emitted plug-added, thus the
ShellTrayIcon has not been created. This results in various criticals
and exceptions in the tray-icon-removed handler.
https://bugzilla.gnome.org/show_bug.cgi?id=633028
MutterWindow and MutterPlugin have been renamed to MetaWindowActor
and MetaPlugin, mutter_plugin_list_windows() to
meta_plugin_list_window_actors(). Adapt to those changes.
https://bugzilla.gnome.org/show_bug.cgi?id=632500
Although within St itself there are situations where the semantics of
these functions (return TRUE or FALSE and return the actual value in
an out parameter) is useful, it's mostly just annoying at the
application level, where you generally know that the CSS property is
going to specified, and there is no especially sane fallback if it's
not.
So rename the current methods to lookup_color, lookup_double, and
lookup_length, and add new get_color, get_double, and get_length
methods that don't take an "inherit" parameter, and return their
values directly. (Well, except for get_color, due to the lack of (out
caller-allocates) in gjs.)
And update the code to use either the old or new methods as appropriate.
https://bugzilla.gnome.org/show_bug.cgi?id=632590
Gjs changed to separate the "basic" API from "embedder" API. Unfortunately
due to our use of the importer API and a few other bits, we need to use
the "module" one. In the future I plan to extend the core API to
support this use case.
Add volume control indicator which uses API from gnome-volume-control
to interact with PulseAudio and shows both input and output volumes.
Also adds a small wrapper around libcanberra in ShellGlobal, used by the
volume indicator to provide auditive feedback.
https://bugzilla.gnome.org/show_bug.cgi?id=629455
The library is introspected, and should not require using
Pulseaudio directly.
With help from Giovanni Campagna <scampa.giovanni@gmail.com>
(introspection annotations, build fixes)
https://bugzilla.gnome.org/show_bug.cgi?id=629455
st-theme stores some loaded stylesheets in a custom
stylesheets list. When removing items from this list
it unrefs them, but when adding items to the list it
neglects to ref them. This means that under certain
circumstances the list will contain items that have
already been freed.
https://bugzilla.gnome.org/show_bug.cgi?id=632477
StDrawingArea uses the member variable needs_repaint to keep track
of whether it needs repainting. The variable is set to TRUE correctly,
e.g. on allocation or style changes - alas, it is never set to FALSE,
resulting in the area being repainted continuously.
https://bugzilla.gnome.org/show_bug.cgi?id=632197
Since we're just using a cut-and-paste of gdm code there's a
slight impedance mismatch between how that code and the rest of
the shell manage debug messages. In GDM, they're out of sight by
default, but in gnome-shell they're visible and quite verbose.
This muddies up and masks the useful messages that other parts
of the code generate.
This commit just mutes the messages unconditionally by default,
since they aren't that useful anyway.
The GDM code upstream talks to the account service now,
has better introspection annotations, and is more
asynchronous.
This commit updates the shell's copy to the latest
upstream.
Note, the API changed somewhat and so the callers will
need to be fixed up subsequently.
https://bugzilla.gnome.org/show_bug.cgi?id=631888
1. move logic to shell-app.c
2. change state to RUNNING only after startup sequence complete
3. correct handle state for applications with several .desktop files
https://bugzilla.gnome.org/show_bug.cgi?id=623688
Non-uniform border-radii are already supported when using a gradient
background, this patch adds support for solid colors as well.
The currently applied technique of using corner textures and filling
the remaining area with rectangles is extended, so that each corner is
padded with rectangles to the size of the largest corner.
Add border-radius.js to test cases, to test non-uniform border-radii
with both solid color and gradient backgrounds.
https://bugzilla.gnome.org/show_bug.cgi?id=631091
Icons can be loaded as St.Icon.SYMBOLIC, FULLCOLOR, APPLICATION or
DOCUMENT. The first will look for a symbolic equivalent, the second
looks for a full-color version (and does fallback, eg, from
"drive-harddisk-usb" to "drive-harddisk"). APPLICATION and DOCUMENT do
full-color icons without fallback (as specified by the icon spec).
And update various callers to use the right flags.
Based on a patch from Matt Novenstern.
https://bugzilla.gnome.org/show_bug.cgi?id=621311
Switch to using the layer combine constant rather than the material
primary color for representing the opacity of the material; this
avoids triggering a Cogl bug where changing the primary color corrupts
the layer state.
https://bugzilla.gnome.org/show_bug.cgi?id=629616
The actor emitted by ShellTrayManager is now ShellTrayIcon, a subclass
of ShellGtkEmbed which has several properties on it which are (or will
soon be) useful to the shell.
Part of the rearranging to use ShellTrayIcon means that we now show
the ShellEmbeddedWindow before creating its ShellGtkEmbed, which
requires a few modifications to ShellEmbeddedWindow (notably, telling
it at construct time what stage it will be drawn on, since it needs to
know that before it has a ShellGtkEmbed now).
https://bugzilla.gnome.org/show_bug.cgi?id=608869
Previously the code to keep the X window aligned with its actor made
various assumptions that were true in the panel status tray area but
that are not true in the message tray. Fix it up by repositioning the
X window at clutter_actor_paint() time, which will definitely be
called every time the actor moves, whether it's because of its own or
its parent/ancestor's changes.
https://bugzilla.gnome.org/show_bug.cgi?id=608869
As of 1.4, ClutterGLXTexturePixmap is identical to
ClutterX11TexturePixmap (with the differences having been moved into
the cogl layer). So make ShellGtkEmbed use the (introspected) X11
version, which then allows us to make the instance and class structs
public as well.
https://bugzilla.gnome.org/show_bug.cgi?id=608869
Override the new mutter preference /apps/mutter/general/attach_modal_dialogs
to attach modal dialogs to their parent window. Animate the modal dialogs
expanding from the top of the parent window. Slowly dim the parent window
after the dialog comes up.
https://bugzilla.gnome.org/show_bug.cgi?id=612726
* Use --warn-all, --warn-error
* Fix various broken gtk-doc
* Drop unused shell_get_event_related
* For header defines, we currently require them to end in _H to be skipped
* Drop the no-longer-necessary fix-meta-rectangle.py hack
* Move to the convention of using -private.h for headers that are,
well, private.
* Add shell-wm-private.h
Move shadow helper functions from st-theme-node-drawing to st-private
to make them available to widgets which want to add shadows to internal
actors.
Also add a new helper function for creating the shadow material from a
ClutterActor.
https://bugzilla.gnome.org/show_bug.cgi?id=624384
Reorganize the existing code which parses the -st-shadow property
to allow parsing different shadow properties and add support for
the text-shadow property.
https://bugzilla.gnome.org/show_bug.cgi?id=624384
If a shadow property is inherited from a parent, multiple StThemeNodes
share a common StShadow. It would be possible to use st_shadow_copy()
for this purpose, but proper reference counting is nicer.
https://bugzilla.gnome.org/show_bug.cgi?id=624384
Add basic support for background-position, which only supports absolute
values.
Also don't require an unit to be specified for 0 (because the unit does not
really matter here 0 is 0 regardless of the unit).
https://bugzilla.gnome.org/show_bug.cgi?id=624375
Add st_theme_node_paint_equal() and use that to do two things:
1) Avoid animating transitions where nothing changes.
2) Copy cached painting state from the old theme node to the new
theme node.
https://bugzilla.gnome.org/show_bug.cgi?id=627083
Creating an FBO may be expensive, so we should avoid the operation
if possible. When transitioning between theme nodes, the widget's
opacity is used to paint to the offscreen textures which are blended
together - this means that the textures have to be recreated each time
the widget's opacity changes. It is much more effective to paint the
textures at full opacity and respect the widget's paint opacity when
blending the textures together.
https://bugzilla.gnome.org/show_bug.cgi?id=627085
The current search system uses the OR operator to concatenate search
terms. While results which are matched multiple times sort before
other matches, it is almost guaranteed that adding an additional term
to the search increments the number of results, which is rather
surprising.
https://bugzilla.gnome.org/show_bug.cgi?id=610955
gdk_screen_get_rgb_colormap() has been removed from GTK+; there's
no longer a special visual that is used for drawing true-color
images distinct from the system visual. So, we don't need to
check for it; if the visual isn't the system visual, we just
fall through to the case where we create a new GdkColormap.
The function has been upstreamed as clutter_actor_contains() - with
the switch to clutter-1.4 it is now available to the Shell, so it
is no longer necessary to keep a copy in-tree.
https://bugzilla.gnome.org/show_bug.cgi?id=626512
Add support for the CSS :first-child and :last-child properties to
StContainer, and thus to all containers in St and ShellGenericContainer.
The internal ordering of the container's children is used to determine
the child to which to attach the pseudo class, not the children's
positions. This means that containers where positions can differ from
the ordering (ShellGenericContainer / StGroup) may behave unexpectedly,
so some caution is required.
https://bugzilla.gnome.org/show_bug.cgi?id=625316
When we are manually starting dconf in the case where it can't
be activated via D-Bus, we need to set LD_LIBRARY_PATH in its
environment, since dconf is no longer linked with a rpath.
(Unlike the rest of GNOME, it doesn't use libtool.)
There's an assertion in calculate_gaussian_kernel() to avoid a division
by zero - due to an unnecessary cast from float to int this assertion
is triggered incorrectly for small (but non-zero) values, e.g. a blur
radius of 1px.
Recently, g-ir-scanner got a little stricter with regard to
GSList, marking functions not introspectable if the element
type is not annotated. This fixes a visible JS Error by g-ir
and gdmuser/gdm-user-manager.c
Add SHELL_STAGE_INPUT_MODE_FOCUSED, to move the keyboard focus to the
shell without grabbing the keyboard or mouse, and make
stage_input_mode into a GObject property so that (among other things),
callers can tell when MODE_FOCUSED reverts back to MODE_NORMAL.
https://bugzilla.gnome.org/show_bug.cgi?id=623429
g-ir-scanner is currently buggy and confuses the Gdk.Rectangle alias
with MetaRectangle. Since this is moderately hard to fix in
gobject-introspection and the fix would conflict with in-progress
changes, work around by doing a 'sed job' on the generated Meta.gir.
https://bugzilla.gnome.org/show_bug.cgi?id=623640
The conversion of GdkRectangle to a typedef for cairo_rectangle_int_t
in GTK+-3 makes it no longer a proper boxed type (it's still registered
boxed, but gobject-introspection doesn't know that.) So, switch to using
MetaRectangle, which is now registered as a boxed type by Mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=621845
"text-align" allows setting the alignment of text, with respect to
other lines and allocated space, without requiring a reference to
the ClutterText (which is private for most widgets).
If not specified, all text is left-aligned.
https://bugzilla.gnome.org/show_bug.cgi?id=622447
* Add dconf and dependencies to the moduleset and add
libxml2 dependency to gnome-shell-build-setup.sh
* if we can't ping the dconf D-Bus service, try to
activate it manually.
* Stop forcing GConf via GSETTINGS_BACKEND
https://bugzilla.gnome.org/show_bug.cgi?id=622308
It has probably crossed the line to evil by a mile or so, but here
it is: a Tweener.slowDownFactor replacement used by all animations
without exception.
While at it, update Tweener to use the new setTimeScale() upstream
function instead of adjusting the timeline directly.
https://bugzilla.gnome.org/show_bug.cgi?id=622249
Windows are only added to an application if they are considered
"interesting". If we keep it that way, we cannot unconditionally
call _shell_app_remove_window() - applications without interesting
windows are not considered running, so the call crashes the shell.
https://bugzilla.gnome.org/show_bug.cgi?id=622236
Use GSettings for all Shell configuration. GConf is kept to read
configuration from external programs (Metacity, Nautilus and Magnifier),
but ShellGConf is removed because it's mostly useless for the few calls
we still have. Also get rid of unused GConf code in ShellAppSystem.
A basic GConf schema is still used to override Metacity defaults and
configure Magnifier in a system-wide fashion. GConf is also used as
GSettings backend via the GSETTINGS_BACKEND environment variable.
All of this will be removed when these programs have been ported
to GSettings and able to use dconf.
GLib 2.25.9 is required. Schemas are converted to the new XML format,
and compiled at build time in data/ so that the Shell can be run from
the source tree. This also requires setting the GSETTINGS_SCHEMA_DIR
environment variable both when running installed or from source tree,
in src/gnome-shell.in and src/gnome-shell-clock-preferences.in.
https://bugzilla.gnome.org/show_bug.cgi?id=617917
This is a small memory usage optimization, and cleans up the code.
In particular, this will help for later patches which perform
more substantial operations on running apps.
https://bugzilla.gnome.org/show_bug.cgi?id=621203
Nothing uses ShellOverflowList any more, so remove it. (Even if we
want that sort of functionality again later, we'd want it to be
StWidget-based, and with a name less likely to be confused with
StOverflowBox.)
https://bugzilla.gnome.org/show_bug.cgi?id=621582
This function reads a single image file which contains multiple
images internally.
The image file will be divided using @grid_width and @grid_height;
note that the dimensions of the image loaded from @path
should be a multiple of the specified grid dimensions.
https://bugzilla.gnome.org/show_bug.cgi?id=598349
The framebuffer setup code can fail, e.g. when the texture used as
color buffer has a height/width of 0. In that case, the call to
cogl_pop_framebuffer() will crash the shell trigger an assert. Add
error checking to fail gracefully.
Add _st_actor_contains() in st-private for use within St, and
monkey-patch in a Clutter.Actor.contains() for use by javascript, and
then replace all the duplicate implementations with one or the other
of those.
https://bugzilla.gnome.org/show_bug.cgi?id=621197
Our behavior of reversing the animation when the widget's style
changes back to the previous one is sound. On the other hand, when
there's a change to a new style while a transition is active, we
simply cancel the ongoing transition. Updating the transition
correctly so that the new one starts from an intermediate state
is hard.
Nevertheless, if the style changes before any time of the transition
has elapsed, we should do better than the current behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=621140
First, we were passing an incorrect timestamp to
meta_display_focus_the_no_focus_window - fix that.
The invocation of set_focus_app to the started app there couldn't
really work, because (if the above call had worked) we'd get the
X reply *after* the started app.
What we need to untangle here is the distinction that's now made in
ShellApp between _STATE_STARTING and _STATE_RUNNING. A nice way to
start doing this is to rebase ShellWindowTracker to only be concerned
with app states. Concretely, the current "has windows implies
running" logic now lives just inside shell-app.c.
Rename the app-running-changed signal to be app-state-changed. This
will ultimately be useful so that inside the panel, we can track
the last started app.
https://bugzilla.gnome.org/show_bug.cgi?id=620899
The current code only sets up / updates transitions when the new
node's transition-duration is non-zero. It should cancel an
existing transition if the duration is 0.
It is sometimes desirable to fade smoothly between two styles
instead of changing it abruptly.
Add transitions controlled by the transition-duration CSS property.
https://bugzilla.gnome.org/show_bug.cgi?id=619025
StThemeNodes may have properties - namely shadows - which paint
outside an actor's allocation. This is not a problem unless drawing
is redirected to an offscreen buffer, in which case the actually
painted size is needed in advance when setting up the buffer.
Add a convenience method to calculate an allocation large enough to
paint the node.
https://bugzilla.gnome.org/show_bug.cgi?id=619025
Add st_theme_node_equal() - two nodes are considered equal iff they
refer to identical elements, so e.g. .example and .example:hover are
not equal, even if no .example:hover rule exists in the CSS.
https://bugzilla.gnome.org/show_bug.cgi?id=619025
Previously we were trying to match up remote windows with local
.desktop files, which is definitely wrong. This patch simply
falls back to the app-from-window case for this; better handling
would need design.
https://bugzilla.gnome.org/show_bug.cgi?id=620855
Separate out the main app view into different sections based on the categories
in the desktop file. The configuration is done via gmenu and the desktop menu
specification, we set XDG_MENU_PREFIX="gs-" on startup, so that gmenu reads
gs-applications.menu, which we install.
There is no support for "submenus" - only the menus directly under
Applications will be displayed as categories.
https://bugzilla.gnome.org/show_bug.cgi?id=614131
Currently we only relayout when the screen size changes, this gets
the cases where a monitor gets added/removed but not when the primary
monitor changes.
We need to relayout on all monitor layout changes.
Remove ShellGlobal::screen-size-changed signal as it is no longer used, Gdk is
used to track changes now.
A ShellGlobal::gdk-screen property is added for this purpose.
https://bugzilla.gnome.org/show_bug.cgi?id=620377
When hovering over the entry's ClutterText, the entry itself
currently receives a leave event and updates the hover state.
Apply the same logic as StWidget itself to treat children as
part of the entry.
https://bugzilla.gnome.org/show_bug.cgi?id=620381
Add an event when we receive an event on buffer swap completion; we'll
only get this if Clutter is using the INTEL_swap_event GLX extension,
but it's useful to see the actual timing of video frames.
The recorded event includes the actual timestamp of the swap, since
we are given that in the GLX event - on my system it tends to be
consistently 80-100us before we log the event, but if something was
going wrong in event handling (too much synchronous work), then that
could could show up as a longer delay.
https://bugzilla.gnome.org/show_bug.cgi?id=619516
Currently shadows disregard the overall opacity, so e.g. setting
an ancestor's opacity does not effect the shadow. Fix this by
deferring the setting of the shadow's color until it is painted.
Also move duplicated drawing code from st_theme_node_paint() into
its own function.
https://bugzilla.gnome.org/show_bug.cgi?id=619083
The preference dialog for the panel clock does not set its gettext
domain, so it's not translated even if though translations are
already available.
Fix by setting the domain in the GtkBuilder file and binding the
domain to the locale directory.
https://bugzilla.gnome.org/show_bug.cgi?id=618873
Currently the size of an StGroup depends exclusively on the group's
children - it should be possible to override this behaviour with
fixed values in the CSS.
https://bugzilla.gnome.org/show_bug.cgi?id=613907
Update the GNOME Shell version to 2.31.2, and make corresponding
updates to dependencies:
clutter => 1.2.8
mutter => 2.31.2
gobject-introspection => 0.6.11
gjs => 0.7
Typo: 10000000 instead of 1000000 for a million. Also, use
G_INT64_CONSTANT instead of LL for a 64-bit constant, to avoid
extraneous 128-bit arithmetic on 64-bit machines.
Add a command line option to upload the generated performance report
to a web service. The options for the upload (url, system name, secret
key) are read from ~/.config/gnome-shell/perf.ini.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Switch from having separate METRICS and METRIC_DESCRIPTIONS objects
in a perf module to a single METRICS array. This is done so the
perf module can define the units for each metric.
In addition to improving the output in the web interface, the purpose
of having units is to give some clue about how to pick from multiple
values from different runs. In particular, with the assumption that
"noise" on the system will increase run times, for time values we want
to pick the smallest values, while for "rate" values, we want to pick
the largest value.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add --perf-output=<filename> option to gnome-shell that combines
the reports written for each run by the C/Javascript code into
a complete report.
If this option is not specified, a brief human-readable summary
is printed to stdout instead.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
When SHELL_PERF_OUTPUT is set, instead of just dumping out the metrics, dump
a more complete report with:
- Event descriptions
- Metric descriptions and value
- Event log
Helper functions shell_perf_log_dump_events() and shell_perf_log_dump_log()
are added to ShellPerfLog to support this. The gnome-shell wrapper is adapted
to deal with the changed report format.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add a helper function to write a string as UTF-8 to a GOutputStream.
The signature of GOutputStream:
gboolean g_output_stream_write_all (GOutputStream *stream,
const void *buffer,
gsize count,
gsize *bytes_written,
GCancellable *cancellable,
GError **error);
Can't currently be handled by GJS.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add gnome-shell options:
--perf-iters=ITERS"
Numbers of iterations of performance module to run
--perf-warmup
Run a dry run before performance tests
Make a successful run of a performance test return 0 not non-zero,
and handle the difference between that and a 0-exit in normal
usage (meaning replaced) in the wrapper.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Move the code that starts gnome-shell and waits for it to exit
to a function in preparation for running it multiple times when
doing iterations of a performance test.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add some basic statistics for allocated memory based on mallinfo(),
and use that to define two metrics:
usedAfterOverview: bytes used after the overview is shown once
leakedAfterOverview: additional bytes used when the overview is
shown a second time.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add a facility for defining and recording numeric statistics
as performance events
shell_perf_log_define_statistic()
Define a statistic and the corresponding event type
shell_perf_log_update_statistic_[ix]() -
Update the stored statistic value
shell_perf_log_add_statistics_callback()
Add a function called before collecting statistics
shell_perf_collect_statistics()
Update statistics and record events for them
In addition to the explicit collection, statistics are
recorded at a periodic interval (currently 5s)
https://bugzilla.gnome.org/show_bug.cgi?id=618189
We want to be able to summarize the behavior of the shell's
performance in a series of "metrics", like the latency between
clicking on the Activities button and seeing a response.
This patch adds the ability to create a script under perf/
in a special format that automates a series of actions in the
shell, writing events to the performance log, then collects
statistics as the log as replayed and turns them into a set
of metrics.
The script is then executed by running as gnome-shell
--perf=<script>.
The 'core' script which is added here will be the primary
performance measurement script that we use for shell performance
regression testing; right now it has a couple of placeholder
metrics.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
ShellPerfLog provides a way for different parts of the code to
record information for subsequent analysis and interactive
exploration. Events exist of a timestamp, an event ID, and
arguments to the event.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
To support scheduling performance-measurement scripts that want to run
a number of actions in series, add shell_global_run_at_leisure() to run
a callback when all work is finished.
The initial implementation of this is not that accurate: we track
business in Tweener.js via new shell_global_begin_work(),
shell_global_end_work() functions, and we also handle the case
where the main loop is continually busy.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
The API docs for ShellApp claimed it sorted by the last time the
user interacted with the app, but if one closed a window, then
we would fall back to comparing against a possibly much older
timestamp from another window. Fix this by just keeping a
user time per app.
Also clean up the comparison function to explicitly check the state
instead of deferring to the window list.
https://bugzilla.gnome.org/show_bug.cgi?id=618378
The ShellGlobal initialization performs several actions like connecting
to the X server, ensuring directories exist, etc., that are problematic
because we were creating the object even when running the binary for
introspection scanning. During compilation we may not even have X11
available in e.g. autobuilder type environments, and it's just a
bad idea to connect even if we do.
Avoid this by deferring creation of the ShellGlobal object
until the plugin is actually started.
Now that we're initializing things later, remove the connection to
screen changes, and initialize cached ShellGlobal state at the point
when the plugin is set. The root pixmap actor is now sized initially
on creation too. Instead of relying on screen-size-changed being
emitted on startup, explicitly invoke _relayout().
https://bugzilla.gnome.org/show_bug.cgi?id=618371
I have no idea why there existed code that if we saw e.g. min-width
without a width, we assigned min-width to ->width, thus effectively
treating it as a maximum.
Just delete that bit.
https://bugzilla.gnome.org/show_bug.cgi?id=618482
Starting with gtk-2.20.0 there is a gdk_screen_get_primary_monitor,
which supports querying the primary monitor from xrandr.
But due to a sorting bug and lack of heuristics in the fallback path,
it isn't really useable.
Those bugs are fixed in gtk-2.20.1, so use it when building with
gtk-2.20.1+.
https://bugzilla.gnome.org/show_bug.cgi?id=608647
Passing an explicit width in the wfh case or a height in the hfw case
messes up the request caching, and confuses actors that assume they
won't be called with an explicit width/height unless they're being
allocated along the other axis.
https://bugzilla.gnome.org/show_bug.cgi?id=618295
Adds the ability to create one or more zoom regions that show magnified or
enhanced views of the desktop. The magnifier provides options for:
* magnification factor,
* four mouse tracking modes common to screen magnifiers,
* positioning the magnified view in one of four screen location, or full screen,
* crosshairs to accentuate the position of the mouse,
* user preferences persistence via GConf (schemas in
.../data/gnome-shell.schemas).
* a DBus API to allow other processes to drive the magnifier as a service.
https://bugzilla.gnome.org/show_bug.cgi?id=595507
Add StContainer, which implements the ClutterContainer interface based
on the container methods in st-private and make the existing containers
subclass it.
https://bugzilla.gnome.org/show_bug.cgi?id=613907
To replace all calls to deprecated code, GTK+ 2.20 is required - add
some basic compatibility code, so that is still possible to build the
shell with GTK+ 2.18 when not using -DGSEAL_ENABLE.
https://bugzilla.gnome.org/show_bug.cgi?id=618258
With the transition to GTK+ 3.0, direct access to struct members
will no longer be possible.
This bumps the required minimum version of GTK+ to 2.20.
https://bugzilla.gnome.org/show_bug.cgi?id=618258
The StTable code only supports height-for-width. When called in
width-for-height sizing mode, instead of treating the -1 flag
value of 'for_width' as a real width, and requesting all the
children at 1 pixel wide, use the natural width of the table
as the width for determing the height.
Since we can't rewrap in width-for-height mode, we then report
the natural width also as the minimum width of the table.
https://bugzilla.gnome.org/show_bug.cgi?id=618104
readlink() on /proc/<pid>/exe can have results like:
/usr/bin/gnome-keyring-daemon.#prelink#.5DFZsF (deleted)
/usr/bin/gnome-session (deleted)
To find gnome-session in a more robust way, read /proc/<pid>/cmdline
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=616706
The design calls for raising all windows for a given app in
certain circumstances; implement this. The new _focus method
raises all windows for the app if it's running.
We further change the _activate method (which a lot of the shell
UI calls now) to invoke _focus for the running case, which means
that e.g. the application well will now raise all app windows.
https://bugzilla.gnome.org/show_bug.cgi?id=616051
When creating the directory to store user data, XDG_DATA_HOME is
not guaranteed to exist. Also, the standard mandates permissions
of 0700 for the directory.
https://bugzilla.gnome.org/show_bug.cgi?id=617555
As StEntry handles hover differently depending on whether it is
activated or not, the generic hover support in StWidget is
insufficient. Nevertheless it makes sense to set the hover status
using StWidget methods instead of setting the pseudo class directly.
While the extension system already uses an XDG location (XDG_CONFIG_HOME),
other components use the deprecated $HOME/.gnome2 directory.
Replace both with XDG_DATA_HOME - the existing data (app usage stats,
looking glass history and extensions) is not migrated to the new location.
https://bugzilla.gnome.org/show_bug.cgi?id=617555
The (optional) spread radius allows to make the shadow bigger without
enlarging the blur value. Mozilla supports this parameter for the
-moz-box-shadow property.
https://bugzilla.gnome.org/show_bug.cgi?id=613832
To avoid visual duplication with the application menu, eliminate
the window menu button. (The window menu can still be accessed by
right-clicking on the title bar, or Alt-right-clicking anywhere on the
window.)
This is implemented using the new Mutter facility for GConf key
redirection; we add separate key for 'button_layout' with a default
that omits the menu button.
https://bugzilla.gnome.org/show_bug.cgi?id=591390
With the changes from bug 615586, Mutter now expects a separate start()
method which is called after construction. Move our initialization from
constructed() to start() so it can access the MetaScreen.
https://bugzilla.gnome.org/show_bug.cgi?id=615592
This patch combines several high level changes which are conceptually
independent but in practice rather intertwined.
* Add a "state" property to ShellApp which reflects whether it's
stopped, starting, or started. This will allow us to later clean
up all the callers that are using ".get_windows().length > 0" as
a proxy for this property
* Replace shell_app_launch with shell_app_activate and shell_app_open_new_window
A lot of code was calling .launch, but it's signficantly clearer
if we call this ".open_new_window()", and later if we gain the ability
to call into an application's menu, we can implement this correctly rather
than trying to update all .launch callers.
* Because ShellApp now has a "starting" state, rebase panel.js on top of
this so that when we get a startup-notification sequence for an app
and transition it to starting, it becomes the focus app, and panel.js
cleanly just tracks the focus app, rather than bouncing between SN
sequences. This removes display of non-app startup sequences, which
I consider an acceptable action in light of the committed changes
to startup-notification and GTK+.
https://bugzilla.gnome.org/show_bug.cgi?id=614755
We can't use gdk_display_get_pointer/gdk_window_get_pointer from gjs
when XKB is active. We already had a wrapper that did the
get-modifier-state part of that, but some places also need the
get-pointer-location part of it. So update our wrapper to return both,
and update js code to use it.
https://bugzilla.gnome.org/show_bug.cgi?id=613428
Also, remove a lot of cruft from genericDisplay.js leftover from
previous St-ifications, and remove the pre-gtk-2.16 hacks from the
status tray in panel.js (which are much less needed with the
nearly-all-black panel anyway).
https://bugzilla.gnome.org/show_bug.cgi?id=614516
The actual changes to shell-menu.[ch] are pretty minimal; most of the
changes there are just style/spacing/indentation.
Also, removed shell_menu_append_separator() since it wasn't needed;
the separators would already have been behaving as intended just
because they were non-reactive.
https://bugzilla.gnome.org/show_bug.cgi?id=614516
Most subclasses override get_preferred_width/height, but if they don't
(eg, StDrawingArea), then make sure they still take CSS-specified
sizes into account.
https://bugzilla.gnome.org/show_bug.cgi?id=614516
StThemeNode holds a reference to its parent, but we never released
that reference. This could cause us to hold onto whole chains
of theme nodes with rather dire memory usage implications.
Also move the other g_object_unref into _dispose.
https://bugzilla.gnome.org/show_bug.cgi?id=614660
Currently shell_global_get_primary_monitor just returns the first screen,
in the list as primary.
This is not always correct as the first screen reported by mutter isn't always,
the first one listed by RANDR.
Use gdk_screen_* to query the monitor information and add a heuristic to prefer
LVDS displays (similar like in done for gnome-panel) to prefer the laptop's
internal screen over external displays.
https://bugzilla.gnome.org/show_bug.cgi?id=608647
Ok, there admittedly wasn't a strong rationale for having it in a
later, and by performing this immediately we reduce race conditions
for our focus_app versus startup_notification handling.
https://bugzilla.gnome.org/show_bug.cgi?id=612833
Paint/pick all children, regardless of whether or not they lie within
the content_box. The previous behavior was that a child that was 99%
outside the box would be fully visible, but a child that was 100%
outside the box would be fully hidden. This is somewhat odd, and
doesn't match the behavior of the other St container classes, and at
any rate, the use of clutter_actor_get_allocation_box() for this
optimization was incorrect since it doesn't take into account
transformations (anchor point, rotation, etc) that might cause the
child to be drawn within the content_box anyway.
(For scrolled StBoxLayouts, drawing is still clipped to the
content_box, as before, but will now properly take transformations
into account as well.)
https://bugzilla.gnome.org/show_bug.cgi?id=614047
When the window's top-left corner is the same as the monitor's top-left
corner the check in shell_global_get_focus_monitor fails to detect that.
Use <= rather than < to fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=613944
The idea behind this move is that we have a lot more control over
rendering if StWidget isn't a big pile of actors, and things are
more efficient.
https://bugzilla.gnome.org/show_bug.cgi?id=607500
The hover rewrite added a freeze/thaw_notify to
st_clickable_leave_event() (to match the one already in
st_clickable_enter_event()), which broke code in two places that
assumed "pressed" would still be TRUE when "hover" changed to FALSE.
Fix that by exposing the "held" property as well.
A pointer does not equal to an int on x86_64
(which results into pointer - pointer not being an int either),
fix that by casting the resulting value to an int.
Breakage was introduced by commit 909b5ec43c
If track-hover is set, update the hover property automatically, and
the "hover" pseudo class to match, as StClickable used to do. (Remove
the corresponding code in StClickable). Tweak the tooltip handling to
use track-hover, which also makes it slightly more reliable in the
presence of reactive children, etc.
Since style_class and pseudo_class are space-separated lists of names,
add new methods to add and remove individual names rather than just
re-setting the entire name.
Update existing code to use the new pseudo-class methods where
appropriate. In some cases, this may result in actors having multiple
pseudoclasses where previously they only had one at a time, but there
don't seem to be any visible differences.
(There are some places that could usefully use the new style_class
methods as well, but this patch doesn't change them.)
Also, update test-theme.c to test the new methods.
https://bugzilla.gnome.org/show_bug.cgi?id=604943
The way we were loading data into a CoglTexture, then pulling it out
and manipulating it on the CPU, then loading it back into a texture
was a bit lame.
Clean things up a bit here by loading directly into the CPU, doing
the fading, then creating a texture.
Also cache the faded data in StTextureCache.
https://bugzilla.gnome.org/show_bug.cgi?id=612759
If we don't do this, then boolean/int/list keys will seem to sort of
work (but defaulting to false/0/[] instead of the correct schema
defaults), but string keys will return null, which will usually cause
exceptions or crashes.
https://bugzilla.gnome.org/show_bug.cgi?id=611214
The relationship between adjustments and scrollbars and
scrollable widgets was much more complex than it needed to be.
StScrollView: Have the scroll view own a pair of adjustments,
set them on the child on add(), remove unnecessary
change notification signal connections.
StBoxLayout: Remove auto-create of adjustments, just take the
adjustments from the scrollbars and set them on the scrollable
child. Notify for hadjustment/vadjustment properties.
StScrollBar: Notify adjustment property.
StScrollable: Document how adjustment setting works.
https://bugzilla.gnome.org/show_bug.cgi?id=611740
* Add missing chain-up for dispose and finalize methods
* ShellGenericContainer needs to destroy its children in dispose()
* Fix variable naming and excess casts in st_label_dispose()
https://bugzilla.gnome.org/show_bug.cgi?id=612511
StScrollable: Document how to set adjustments
StBoxLayout: Make sure that we always have upper >= lower + page_size,
so that clamping works properly. Set the page_increment to be slightly
less than the page_size so there is some overlap, as is customary.
StScrollView: Remove unnecessary fabs() calls, rewrite expressions
for additional clarity.
https://bugzilla.gnome.org/show_bug.cgi?id=611740
- Fix existing typos and spacing problems
- Get preferred height, not current height, of shadows
- Let shadows overflow don't clamp them when we have too little space
- Remove a now-unecessary stray MAX()
- Fix up scrollview visibility for the pathological case of no child
- Disconnect from adjustments on remove()
- Don't unset the adjustments on the child on remove(), since they
already existed or were autocreated on add()
(We should what we are doing and set the adjustments of the
scrollbars on the child rather than setting the adjustments of
the child, so we match GTK+'s scrolllable interface, but this
at least makes it consistent instead of a weird mix.)
https://bugzilla.gnome.org/show_bug.cgi?id=611740
StScrollable: Document how size negotation now works between the
parent and scrollable child.
StBoxLayout: Adapt to the new contract for how size negotiation
works; in particular, handle being allocated less than the
minimum size when scrolled and treat the minimum size as the
size of the scrolled area in instead of the natural size.
StScrollView: Substantially rewrite with fixes including:
- Implement new size negotation contract; this allows us
to determine scrollbar visibility without having to
connect to the adjustment.
- Implement all ALWAYS along with the existing NEVER/AUTO
- When hiding and showing scrollbars and shadows, don't
hide and show widgets, just turn on and off including them
in pick and paint. This avoids queueing relayouts.
- Cleanups for the code for connecting to adjustments,
for changing policy, and for turning on and off shadows.
scroll-view-sizing.js: New test case for StScrollView, allowing
resizing the scroll view interactively, changing the scrollbar
policies and turning shadows on and off.
https://bugzilla.gnome.org/show_bug.cgi?id=611740
When an StScrollView is allocated, allocating the child would
cause the adjustment values to change, which would result in
the scrollbars queueing a relayout, which isn't allowed during
allocation.
To avoid this, instead of queueing a relayout when the adjustment
changes:
- When we have a valid allocation already, just go ahead
and reallocate the children.
- Otherwise do nothing immediately and wait until we get allocated
Because the 'needs_allocation' flag in ClutterActor isn't exposed,
this requires some slightly ugly code to shadow that state locally.
https://bugzilla.gnome.org/show_bug.cgi?id=611944
Having StDrawingArea use ClutterCairoTexture causes circularity
problems with sizing - StDrawingArea wants to use its allocation for
the size of the texture, but ClutterTexture wants to use the size of
the texture to determine the requited size.
Avoid this by making StDrawingArea directly use Cairo and CoglTexture;
while doing this, the API is changed a bit for simplicity and to
match our use case:
- Instead of clutter_cairo_texture_create(), we have
st_drawing_area_get_context() to retrieve an already created
context. This can only be called in the ::repaint signal.
- The ::redraw signal is changed to ::repaint so we can have
st_drawing_area_queue_repaint() that doesn't collide with
clutter_actor_queue_redraw()
- ::repaint is now emitted lazily when painting the actor rather
than synchronously at various different points.
https://bugzilla.gnome.org/show_bug.cgi?id=611750
- Specify a minimum version of clutter-1.2.0
- Switch clutter branch in the moduleset to master
- Replace deprecated cogl_texture/material_unref() with
cogl_handle_unref()
- Use cogl_clip_push_rectangle() rather than cogl_clip_push()
- Replace cogl_check_extension() with strstr - should be
accurate enough.
https://bugzilla.gnome.org/show_bug.cgi?id=610679
It's wrong to do anything that requires looking up a widget's style
before you add the widget to the stage, since its final style may
depend on properties inherited from its parents.
st_widget_get_theme_node() used to emit a warning in this case, but
many would-be contributors apparently didn't notice. Help them out.
https://bugzilla.gnome.org/show_bug.cgi?id=610279
StButton animated the background for button transitions; since these aren't
presently part of the shell design, simply remove them. We can readd
these in the future.
StTooltip should probably have :vertical and :horizontal pseudo classes
to make the arrow work but it should still function.
https://bugzilla.gnome.org/show_bug.cgi?id=607500
Rather than having ShellTextureCache know about the type of each
item it's caching, this lays the foundation for simply caching
arbitrary string -> CoglHandle.
https://bugzilla.gnome.org/show_bug.cgi?id=607500
For StWidget we want the ability to load raw CoglHandle references
rather than having a big pile of actors backing StWidget.
Several bits of StWidget expect to be able to synchronously load
textures; this is a crutch to support that until we can cleanly
make this asynchronous.
https://bugzilla.gnome.org/show_bug.cgi?id=607500
Brute force merge these two by essentially replacing St.TextureCache
with a (renamed) Shell.TextureCache.
One function was added for convenience, namely "st_texture_cache_load_file_simple".
St.TextureCache had a function to load a texture from a filename, and it
returned NULL on error but only half the callers actually checked this. This
function is better.
https://bugzilla.gnome.org/show_bug.cgi?id=607500
StScrollBar: Be robust against being disposed multiple times,
which can happen, and in fact, normally happens when destroying
the parent.
StScrollView: Implement remove() for the hscroll and vscroll members,
and just destroy them in dispose() and let them be removed.
unparent the shadows, instead of just unref'ing them directly.
https://bugzilla.gnome.org/show_bug.cgi?id=611203
When starting oocalc or ooimpress from oowriter's menu get_app_for_window,
fails to recognize the newly started up as such, which result into the appMenu
still showing "Openoffice.org Writer" as app name.
Fix this by trying to window itself first before using the group for finding the app.
https://bugzilla.gnome.org/show_bug.cgi?id=611288
Since shell-slicer.h includes st.h, and that includes
<st/*.h>, we need to add -I $(srcdir) to the command line when
running g-ir-scanner to generate Shell-1.0.gir.
For srcdir != builddir, in the builddir, the st/ subdirectory doesn't
exist, so we can't generate st.h there. Just switch to building st.h
directly in the current directory. (The other option would be to
create a st/ subdirectory in the builddir if necessary; might be a
little cleaner, but this works for now and gets things distchecking.)
Add a 'vshadow' property to StScrollView, which, when turned on,
overlays gradient shadows on the top and bottom of the StScrollView.
Turn this on for the StScrollView used for the app browser.
https://bugzilla.gnome.org/show_bug.cgi?id=609604
The type we don't currently handle is _ALWAYS, my original use
of g_return_if_fail was wrong.
Also the default should be AUTOMATIC in the properties, not ALWAYS.
Finally the test case was still using the incorrect St.ScrollPolicy.
https://bugzilla.gnome.org/show_bug.cgi?id=609015
Previously we were hacking out the vertical scrollbar, this patch
allow us to sanely say in which directions we want to scroll.
Note this patch intentionally changes St to depend on GTK+ in the
API. I believe this is a correct long term change where we should
view St as co-evolving with GTK+ rather than replacing or paralleling.
https://bugzilla.gnome.org/show_bug.cgi?id=609015
st_theme_node_adjust_preferred_width/height now limit the content area
of an actor to the max, if given. (The requested width/height may be
larger to make room for borders, etc.)
https://bugzilla.gnome.org/show_bug.cgi?id=606755
In StBin, StBoxLayout, and StTable, if a child has a potential
allocation that is larger than its preferred size, we give it its
preferred size instead. However, the corresponding
get_preferred_height/width methods were not making the same
assumption, which meant that if we had more width than the widget
wanted, we would allocate it its preferred width, but with the height
that corresponded to the larger width.
Fix this by defining new helpers _st_actor_get_preferred_width() and
_st_actor_get_preferred_height() and using them everywhere. Also, make
StBin and StTable use _st_allocate_fill() rather than having
nearly-identical duplicate copies of the code.
https://bugzilla.gnome.org/show_bug.cgi?id=609848
The forward/backward steppers are always allocated a square region at the
scroll bar's ends. Change the allocation to be based on the steppers' size
requests instead.
https://bugzilla.gnome.org/show_bug.cgi?id=609401
Make the framerate, file extension and gstreamer pipeline used by the
screencast recorder configureable using gconf.
This patch does not change the defaults, it justs provides a way for
the user to override them.
https://bugzilla.gnome.org/show_bug.cgi?id=608995
Fixes drawing of the overview in the case where there is no root pixmap
(eg, --xephyr mode).
(And the workaround for not drawing an unintialized ClutterTexture can
be removed now, since the texture will always have been initialized.)
https://bugzilla.gnome.org/show_bug.cgi?id=609339
To comply with C89, structure initializers should have
only constant values.
(Not a thorough check for this throughout the codebase, just
StWidget is fixed up in this commit.)
https://bugzilla.gnome.org/show_bug.cgi?id=608746
As of 2a78adc5e3, gobject no longer allows for setting construct-only
properties via g_object_set() during object initialization; set the
properties in a custom constructor instead.
https://bugzilla.gnome.org/show_bug.cgi?id=608802
In some situations we might need to look up an application from
a process identifier, such as the notification system where we
will determine application from the message sender.
By calling clutter_actor_get_allocation() in st_widget_recompute_style()
to determine whether to redraw gradients, we triggered a complete
reallocation of the stage for each gradient.
As gradients are processed in st_widget_real_style_changed() anyway, the
additional checks in st_widget_recompute_style() are redundant and can
be removed altogether.
https://bugzilla.gnome.org/show_bug.cgi?id=608847
On style changes from gradient to solid backgrounds, the new background
must be drawn unconditionally, not depending on whether old and new
background color differ.
https://bugzilla.gnome.org/show_bug.cgi?id=608914
The current way we keep track of skip-paint children is more
difficult than it needs to be, and can lead to subtle bugs.
(For one, the skip-paint state of a child is remembered
when it is removed then added back again, which is completely
unexpected.)
Instead of using weak references to track children, just remove
items from the skip-paint list by overriding the remove() virtual
function of the ClutterContainer interface.
The 'skip_paint' hash table is then destroyed in finalize rather than
dispose since it doesn't hold references to memory any more but just
passively tracks an attribute of the children that are currently in
the container.
https://bugzilla.gnome.org/show_bug.cgi?id=608848
When moving a widget with a gradient, its allocation changes
continuously, resulting in constant redraws.
Checking for actual size changes before the operation avoids
unnecessary redraws.
https://bugzilla.gnome.org/show_bug.cgi?id=608715
The screen recording wasn't working because of two bad interactions
with Cogl:
- Buffered primitives weren't being flushed out
- Cogl changes the pixel store values away from their default values
Thanks for Jon Nettleton for tracking down the source of the
problems with the recorder.
https://bugzilla.gnome.org/show_bug.cgi?id=598390
StButton has an internal animation for the border-image actor, then
it connects to the "completed" signal passing itself as data. However,
if the button is destroyed, nothing prevents the animation's completed
signal from then causing a reference to freed memory.
Holding a reference to the button is the most straightforward fix here.
https://bugzilla.gnome.org/show_bug.cgi?id=607825
Added signal 'screen-size-changed' to ShellGlobal.
Connect to this signal in main.js and run the _relayout() method.
If Overview or calendar are visible when this signal emit, they will be hiding.
https://bugzilla.gnome.org/show_bug.cgi?id=584526
Replace ngettext with dngettext and set the correct translation
domain, so gnome-shell's domain is searched for translations
rather than mutter's.
https://bugzilla.gnome.org/show_bug.cgi?id=597882
Some theme authors have stated interest in radial gradient backgrounds.
The w3c has some draft:
http://dev.w3.org/csswg/css3-images/#radial-gradients
As this is rather complex, we add only some very basic support, which
extends our syntax for linear gradients:
background-gradient-direction: [vertical|horizontal|radial]
Gradients are centered circles, whose size is determined by the closest
side.
https://bugzilla.gnome.org/show_bug.cgi?id=604945
Some changes to the way we handle CSS gradients:
* draw without padding, thus interpreting gradients as part of the
background rather than as content
* clip to (rounded) border area
* draw the border along the gradient instead of trying to align the
gradient layer with the background/border layer
* use the border_image actor instead of the background_image one
https://bugzilla.gnome.org/show_bug.cgi?id=606257
We were holding on to UsageData structure pointers in previously_running,
but those can be purged by the unused app cleanup. Instead just hold
onto dup'd copies of the application id strings.
Add support for a new -st-shadow property, which is based loosely
on the CSS3 box-shadow property:
http://www.css3.info/preview/box-shadow/
It defers from the specification as follows:
* no multiple shadows
* the optional color argument may be placed anywhere
* the shape is not determined by the widget's bounding box,
but by the background-image property
https://bugzilla.gnome.org/show_bug.cgi?id=603691
Change "./src/gnome-shell --create-extension" to use "gnome-open"
when opening the newly created .js file, so that it is launched
with the user's preferred text editor, instead of hardcoding gedit.
In case of duplicate infos structures with the same id, the
info structures we get from looking up the id in app_id_to_info
aren't necessarily the same as those we used to match, so we
can't rely on matching to implicitly initialize info->casefolded_name.
Since the name collation key isn't used in matching results,
just in sorting, init it on-demand in the sorting which is also more
efficient.
Move CSS handling of StLabel and StButton for their underlying
ClutterText objects into st_private, and implement support for
the underline and strikethrough St text-decoration properties.
Overline isn't implemented for lack of a corresponding Pango
attribute, and blink, well...
https://bugzilla.gnome.org/show_bug.cgi?id=599661
Consumer documentation will live at http://live.gnome.org/GnomeShell/Extensions
In terms of implementation; basically we load extensions from the well-known
directories. Add a GConf key to disable extensions by uuid. There is a new
option --create-extension for the gnome-shell script which takes a bit of
interactive input, sets up some sample files, and launches gedit.
No extensions UI in this patch; that will come later.
https://bugzilla.gnome.org/show_bug.cgi?id=599661
The high level goal is to separate the concern of searching for
things with display of those things; for example in newer mockups,
applications are displayed exactly the same as they look in the
AppWell.
Another goal was optimizing for speed; for example,
application search was pushed mostly down into C, and we avoid
lowercasing and normalizing every item over and over.
https://bugzilla.gnome.org/show_bug.cgi?id=603523
Ideally we'd be able to override _paint, but given that we can't
at the moment, this method gives a way to implement containers
which don't happen to paint all of their children.
https://bugzilla.gnome.org/show_bug.cgi?id=603522
The synchronous close causes us to block in fsync() which has extremely
poor interactivity implications on ext3.
Also, the 5 second timeout was an accidental commit from debugging, 5
minutes is fine.
https://bugzilla.gnome.org/show_bug.cgi?id=602456
StClickable replaces ShellButtonBox. Reduce the number of
button-like things by deleting button.js.
To do so, add CSS style for the actitivies button.
https://bugzilla.gnome.org/show_bug.cgi?id=602131
Now a StBin, and add hover/active style properties. Also, add the
event to the CLICKED signal. Otherwise a straightforward namespace
transformation.
https://bugzilla.gnome.org/show_bug.cgi?id=602131
It's nicer to have ShellDrawingArea as a St widget so it can
participate more cleanly in CSS styling, such as queuing a redraw
automatically on style changes, and allowing subclasses to use
CSS styling.
https://bugzilla.gnome.org/show_bug.cgi?id=602131
Rather than having gradients be individually implemented by higher
level JS widgets, move basic gradient functionality into StWidget.
There is prior art in WebKit for CSS gradients:
http://webkit.org/blog/175/introducing-css-gradients/
However, implementing this would be quite a lot of work; all we
need in the Shell design at the moment is basic horizontal/vertical
linear gradients. So, the syntax now supported is:
background-gradient-type: [vertical|horizontal]
background-gradient-start: color;
background-gradient-end: color;
https://bugzilla.gnome.org/show_bug.cgi?id=602131
An earlier commit was overzealous in removing (out) annotations;
introspection supports (out) for integral types just fine, we
only need to remove them for (out) types where the caller needs
to allocate a boxed type.
https://bugzilla.gnome.org/show_bug.cgi?id=602131
In addition to the Makefile changes, we also change uid_t to gulong in
the public API (which matches how it was already represented in the
gobject properties).
https://bugzilla.gnome.org/show_bug.cgi?id=601458
In a variety of places we're using boxes as data-modeling displays,
and in doing so we often want to either remove the children or
explictly destroy them.
Now ideally Gjs would support callbacks, and this would make using
the for_each functions possible, but even then these functions
are more efficient and shorter to type, at least.
https://bugzilla.gnome.org/show_bug.cgi?id=600734
If the space we're allocated is too small for our border + padding
constraints, don't give negative allocations to callers. Squash
to zero.
It isn't really useful for callers to get negative content sizes,
and certainly breaks most allocation code.
https://bugzilla.gnome.org/show_bug.cgi?id=600734
StTheme CSS supports different border widths for different sides. Implement
it for StWidget by drawing the border internally. However, we don't support
a nonzero corner-radius with nonuniform borders.
https://bugzilla.gnome.org/show_bug.cgi?id=599442
Previously shell_app_remove_window assumed that it was being
passed a window in its list; rather than having callers check
whether a window is interesting and only if so removing it
from the app, just ignore removal of windows we aren't interested
in, like how we ignore addition of windows we already have.
https://bugzilla.gnome.org/show_bug.cgi?id=598502
The behavior in respect to borders matches CSS - the properties set the size of
the content exclusive of the borders (CSS3 box-sizing property - not implemented
here - changes this).
min-width/min-height correspond very closely to the CSS meanings.
width/height are a little different from the CSS meanings - the CSS meaning is
"exactly this size unless overridden by min/max-width/height" - but within the
realm of our layout algorithm, making them control natural size is pretty
close.
This way we can force elements to have a fixed natural or minimum size.
https://bugzilla.gnome.org/show_bug.cgi?id=598651
For the purposes of determining which application is focused, don't
skip "uninteresting" windows. The old get_focused_window code
was used for usage tracking, but here we want reliable application
association.
Also convert a .text= to .set_text that was missed with the last
patch.
https://bugzilla.gnome.org/show_bug.cgi?id=599206
The two parts were mapping windows to applications, and
recording application usage statistics. The latter part
(now called ShellAppUsage) is much more naturally built on top of
the former (now called ShellWindowTracker).
ShellWindowTracker retains the startup-notification handling.
ShellWindowTracker also gains a focus-app property, which is
what most things in the shell UI are interested in (instead of
window focus).
ShellAppSystem moves to exporting ShellApp from more of its
public API, rather than ShellAppInfo. ShellAppSystem also
ensures that ShellApp instances are unique by holding
a hash on the ids.
ShellApp's private API is split off into a shell-app-private.h,
so shell-app.h can be included in shell-app-system.h.
Favorites handling is removed from ShellAppSystem, now inside
appFavorites.js.
Port all of the JavaScript for these changes.
https://bugzilla.gnome.org/show_bug.cgi?id=598646
The window lists were not being resorted when user-time changed, and
the app list was mistakenly "penalizing" apps for having *any*
minimized windows, rather than for having *only* minimized windows.
https://bugzilla.gnome.org/show_bug.cgi?id=598389
Previously, we had ShellAppInfo, which contains fundamental
information about an application, and methods on ShellAppMonitor
to retrieve "live" information like the window list.
AppIcon ended up being used as the "App" class which was painful
for various reasons; among them that we need to handle window
list changes, and some consumers weren't ready for that.
Clean things up a bit by introducing a new ShellApp class in C,
which currently wraps a ShellAppInfo.
AppIcon then is more like the display actor for a ShellApp. Notably,
the ".windows" property moves out of it. The altTab code which
won't handle dynamic changes instead is changed to maintain a
cached version.
ShellAppMonitor gains some more methods related to ShellApp now.
In the future, we might consider changing ShellApp to be a GInterface,
which could be implemented by ShellDesktopFileApp, ShellWindowApp.
Then we could axe ShellAppInfo from the "public" API and it would
return to being an internal loss mitigation layer for GMenu.
https://bugzilla.gnome.org/show_bug.cgi?id=598227
ClutterGroup calls _destroy, but most of St was just calling _unparent.
This caused problems because the DESTROY signal was not emitted
for child elements after destroying a toplevel. Also, in a GC'd
binding it would cause unpredictable lifetime of children.
Some St widgets simply didn't have _dispose at all; implement it.
Note because of the usage of the background_image in StButton,
we can't cleanly destroy it inside the StWidget.
https://bugzilla.gnome.org/show_bug.cgi?id=597845
When we get a ClutterModifierType from Clutter, it might contain
bits not in the enumeration. See bug 59771 for a similar problem
with GdkModifierType.
Add a wrapper Shell.get_event_state() around clutter_event_get_state()
to mask these bits out and only return approved bits.
https://bugzilla.gnome.org/show_bug.cgi?id=597735
gdk_display_get_pointer() sometimes returns values for the mask that
aren't part of the GdkModifierType enumeration, which gjs doesn't like
(bug 597292). Work around that by adding a C wrapper that strips out
the extra flags.
https://bugzilla.gnome.org/show_bug.cgi?id=597559
Add StIMText, which is a drop-in replacement for ClutterIMText but
uses GtkIMContext instead of ClutterIMContext.
StIMText doesn't have preedit support (would need ClutterText
changes), so isn't going to be useful for complicated input methods,
but is good enough to get dead keys and similar working.
entry.js: Simple test case of StEntry
gnome-shell.modules: Remove clutter-imcontext module
https://bugzilla.gnome.org/show_bug.cgi?id=597471
To work around a problem where libcroco < 0.6.2 can't handle
functions starting with 'r' or 'u', preconvert 'rgba' to 'RGBA'
when parsing stylesheets and then check for rgba()
case-insensitively.
(libcroco is uniformly case-sensitive, though the CSS spec requires
that ASCII should be handled case-insensitively.)
https://bugzilla.gnome.org/show_bug.cgi?id=597054
Before we hardcoded popdowns to only button 1 before. But we need
to actually pop down on the release of the activating button.
(Once the button is released, if the we don't pop-down the menu,
then subsequently we let the user use any button.)
https://bugzilla.gnome.org/show_bug.cgi?id=596371
round() is a C99 addition, so causes portability problems:
different C library versions require different #defines to
enable it. So simply avoid using it.
Property enumeration names should correspond exactly to the property names;
in particular the ACTIVE vs :checked disparity was confusing reading the
code.
http://bugzilla.moblin.org/show_bug.cgi?id=6504
Convert the StTable code from StStylable to StThemeNode. The
:row-spacing and :col-spacing GObject properties are converted
into spacing-rows and spacing-columns style properties.
A new interactive test is added for StTable.
https://bugzilla.gnome.org/show_bug.cgi?id=596811
Remove the StTable specific methods to add actors:
st_table_add_actor()
st_table_add_actor_with_properties()
Since they shadow the generic ClutterContainer add_actor() method,
and patch in our add() convenience function as we do for
StBoxLayout.
https://bugzilla.gnome.org/show_bug.cgi?id=596811
Remove the StBoxLayout:spacing GObject property, and instead make
BoxLayout look up the spacing from the CSS style. This makes it
consistent with padding and will allow the use of units. (The
removal of the GObject property entirely instead of making it an
override is consistent with how we handle color, font, padding, etc.)
https://bugzilla.gnome.org/show_bug.cgi?id=596803
Add clutter-text properties to allow getting access to the underlying
ClutterText actor. This corresponds to the get_clutter_text() methods.
The PROP_LABEL and PROP_ENTRY enum values are renamed to PROP_TEXT to
match the names of the properties that they correspond to, and the
properties of StEntry are reordered into alphabetical order.
Based on a patch from Colin Walters
https://bugzilla.gnome.org/show_bug.cgi?id=591245http://bugzilla.moblin.org/show_bug.cgi?id=6313
StBoxLayout: Make consistent that the area scrolled and clipped
to is the content area (excluding borders and padding.) Translate
back appropriately when chaining up so that the parent background
is drawn at the right place and picking on the box (if it's reactive)
picks at the right place on the screen.
clip-to-allocation is removed from StScrollView since it's just
not right - if the child has any non-moving elements, like headers or
borders, it will need to set a narrower clip. And even if the entire
child scrolls, we want to clip to an arrow that excludes the scrollbars.
https://bugzilla.gnome.org/show_bug.cgi?id=595997
When a StBoxLayout is allocated a size less than its natural size,
think "shrink" needs to be divided among the children that have
a smaller minimum size than natural size.
This is done by preferentially shrinking the children that are most
expanded from their minimum size and then increasing that set of
children until we've found enough total shrink.
A new method is used of allocating children at integral sizes - instead
of rounding the per-child extra amount to an integer (which causes
cumulative round-off errors), compute the position as we go along in
floats and round individually for each child widget.
Extend the box-layout test to include of a test of a box being set
to various widths, starting quite narrow.
http://bugzilla.moblin.org/show_bug.cgi?id=6311https://bugzilla.gnome.org/show_bug.cgi?id=595995
If the actor isn't in a stage, then setting up the adjustment
based on the actor's size (which we can't compute) and the
size of the default stage (which isn't relevant), doesn't make
sense. Just use arbitrary default values.
The adjustments will be updated to reasonable values when first
the box is first allocated.
It's not entirely clear to me why we ever want to compute the
adjustment settings this way; perhaps we should always use
default values.
http://bugzilla.moblin.org/show_bug.cgi?id=6307https://bugzilla.gnome.org/show_bug.cgi?id=595996
The CSS specification says that the background extends to the
edge of the border (settable in CSS3 with border-clip), make
BigRectangle match this by computing an "effective border color"
as 'border OVER background'.
(If we don't want this behavior - e.g., to be able to use the
transparent borders as margins, then alternatively transparent
border handling would have to be fixed in st-widget.c, since
prior to this transparent and translucent borders were handled
differently.)
https://bugzilla.gnome.org/show_bug.cgi?id=595993
The current CSS3 border-image is close to a superset of what we were
doing for -hippo-background-image. Woot! rename StThemeImage to
StBorderImage and change parsing to look for:
border-image: <url> <number>...
Rather than
-st-background-image: <url> <length>...
percentanges for the border sizes are not currently supported, neither
are the keywords for handling of the middle part. We always do 'stretch'
for now.
https://bugzilla.gnome.org/show_bug.cgi?id=595990
Use BigRectangle to draw the border and background if there's
a border width or border radius and no border image. (Only
uniform borders are supported for now with some deviations
from the CSS model noted in the comments.)
The background color and image parameters are removed from
StWidget's draw_background() method since they were not used
for StButton (the only current user) and the encapsulation
break that they presented caused some minor problems.
Add a test case for borders, and also use borders to style
the buttons in the 'inline-style' test case.
https://bugzilla.gnome.org/show_bug.cgi?id=595993
Rather than repeating the computation of borders in many different
widget subclasses, add helper functions:
st_theme_node_adjust_for_height()
st_theme_node_adjust_preferred_width()
st_theme_node_adjust_for_width()
st_theme_node_adjust_preferred_height()
st_theme_node_get_content_box()
That are used in get_preferred_width()/get_preferred_height() and
allocate() methods to consistently apply the necessary adjustments.
This allows removing the StPadding type.
Queueing a relayout when the borders/padding change is moved from
st_widget_real_style_changed() to the invoking code to allow access
to the old StThemeNode for comparison. (Should this be added as
a parameter to the signal?)
Borders are included in the geometry adjustments, but borders
are not yet drawn.
https://bugzilla.gnome.org/show_bug.cgi?id=595993
Add support for parsing and caching the border-radius property.
Different radii for the 4 corners are supported; elliptical corners
are not supported.
https://bugzilla.gnome.org/show_bug.cgi?id=595993
Add support for passing an inline-style string when creating a
StThemeNode.
Hook this up to a new 'style' property of StWidget.
Add a test case that demonstrates using this to update font sizes
on the fly.
https://bugzilla.gnome.org/show_bug.cgi?id=595991
ShellTheme replaces both StStyle and ccss_stylesheet_t.
The interface StStylable is replaced by usage of ShellThemeNode.
A concrete node class allows some significant optimizations of property
inheritance that would have been much more difficult to achieve with
the highly abstract pair of StStylable and ccss_node_t.
Some operations that were previously on StStylable (like the
::style-changed signal) are directly on NtkWidget.
Custom properties are no longer registered as param-specs; instead you
call directly into shell theme node to look up a length or color:
shell_theme_node_get_length (theme_node, "border-spacing", FALSE, &spacing);
The dependency on libccss is dropped, while preserving all existing
functionality and adding proper parsing and inheritance of font properties
and proper inheritance for the 'color' property.
Some more javascript tests for CSS functionality are added; workarounds for
a CSS bug where *.some-class was needed instead of .some-class are removed.
https://bugzilla.gnome.org/show_bug.cgi?id=595990
To each .c and .h file, add:
/* -*- mode: C; c-file-style: "gnu"; indent-tabs-mode: nil; -*- */
'gnu' is the default anyways for Emacs, but indent-tabs-mode is not,
so this sets things up to correspond to the policy of no-tabs.
http://bugzilla.moblin.org/show_bug.cgi?id=6467
Import:
HippoCanvasTheme => StTheme
HippoCanvasThemeImage => StThemeImage
HippoCanvasStyle => StThemeNode
StThemeContext is a new class managing the theme for a stage and
global properties like resolution.
test-theme.c is a newly written test program to do verification of the
style matching and property handling rules.
Various changes are made in the import:
- Comprehensive reindentation
- guint32 pixels replaced with ClutterColor
- General pseudo-class support added
- Old-fashioned (non-bordered) background image support added, though
with no support for repeat, etc.
- Bug fixes for problems revealed by test program
https://bugzilla.gnome.org/show_bug.cgi?id=595990
Remove several stale C files that we are no longer using; now
that we have a distcheck hook to catch non-distributed files, these
would otherwise prevent distchecking.
https://bugzilla.gnome.org/show_bug.cgi?id=595988
Add GObject Introspection annotations to methods where needed, in
particular adding (transfer none) to return values that don't transfer
ownership.
st_texture_cache_get_actor() and st_texture_cache_get_texture()
are annotated as (transfer none) since they return a newly
created *floating* texture.
https://bugzilla.gnome.org/show_bug.cgi?id=591245
Import the core MxWidget/MxBin and their dependencies; we use the
namespace "St" (Shell Toolkit) because it is the same length as Mx
so enabling easy sharing of code, but makes it clear that this is
a friendly fork and not a literal import.
Based on a patch by Colin Walters <walters@verbum.org>
https://bugzilla.gnome.org/show_bug.cgi?id=591245
Fix panel, app switcher, and looking glass to limit themselves to the
primary monitor, and run dialog to limit itself to the monitor
containing the currently-focused window.
The overview is also limited to the primary monitor now (with the
other monitors being blacked out), although the workspaces within the
overview are shaped like the full "screen" (the bounding box of all
monitors). To be fixed later.
https://bugzilla.gnome.org/show_bug.cgi?id=593060
Before, if the texture cache received a request to load say
the themed icon for an application multiple times (as could happen
since we have multiple application displays), it would often create
a thread for each one and in fact, load the pixbuf multiple times.
Avoid this by keeping track of outstanding requests.
https://bugzilla.gnome.org/show_bug.cgi?id=596121
This fixes a regression where we weren't using the correct event
timestamps, because for both of these we were sending an XClientMessage
to ourself.
https://bugzilla.gnome.org/show_bug.cgi?id=596262
A previous patch fixed a leak when loading items which shouldn't
be cached, but we also had a leak if two requests for the same
item were outstanding. In that case we load the pixbuf twice,
but should discard subsequent loads when we notice we've already
cached it.
https://bugzilla.gnome.org/show_bug.cgi?id=595321
The menu is needed by the app switcher as well as the overview, so
make it slightly more generic and move the code to appIcon. Also add
support for drawing the menu either to the right of or below the icon.
https://bugzilla.gnome.org/show_bug.cgi?id=590563
When the user click+hold+release over the icon, the effect we want
is for the menu to stick around.
Also, allow the user to mouse over the actual windows and select
them directly. If the user mouses over a window, reflect that in
the menu.
https://bugzilla.gnome.org/show_bug.cgi?id=594699
Callers will generally expect _popup and _popdown to be a no-op if
the menu is already in that state; make it so.
Also change the 'popdown' signal to be 'cancelled'; this is
clearer and allows us to avoid having activate also call popdown.
https://bugzilla.gnome.org/show_bug.cgi?id=594699
We have compatibility code which detects from the window title what
an application is. However, the code didn't handle the case where
we discovered by title, but didn't have the expected .desktop file
installed.
When the user click+hold+release over the icon, the effect we want
is for the menu to stick around.
Also, allow the user to mouse over the actual windows and select
them directly. If the user mouses over a window, reflect that in
the menu.
If start_shell() threw an exception before, we'd overwrite it with
an exception in the finally() clause. Handle this and just print a message
and let the exception propagate.
Before Clutter gained accessors for event information, we had
shell_global_ functions. Now that Clutter has them, use them and
delete the ShellGlobal code.
http://bugzilla.gnome.org/show_bug.cgi?id=594561
When we have multiple windows for an application, implement the following
behavior:
* On click + immediate release, go to the most recently used
* On click, hold for 0.6s, pop up a menu with windows, filtering
the window list to just those windows.
Mouse over on the window list highlights the moused-over window.
Implement this by splitting well item into InactiveWellItem
and RunningWellItem, sharing a base class BaseWellItem.
The application menu code wants to do a popup after a given timeout
while holding. We can implement that by adding a function to
manually break the grab held by the button box.
Freeze+thaw around the hover and pressed property notification on leave
since handlers may want to depend on the pressed state on a hover
transition.
The windows we considered for both the app monitor and the overview
workspaces were the same, but the code was duplicated once in C, once
in Javascript.
On OpenSolaris /usr/bin/python is 2.4; use AM_PATH_PYTHON to find
a newer Python. (The PYTHON environment variable can also be set
before running configure to override the search.)
http://bugzilla.gnome.org/show_bug.cgi?id=578196
Add .AUTOPARALELL which is my GNU-make fix for projects to specify
that the build is parallel-safe, and to automatically parallelize.
Add a missing dependency on built sources, and specify --libtool
to be safe.
Only mouse button 1 is supposed to activate button controls; other
mouse buttons should do nothing unless there is a context menu.
Checking the click count is important, since double-clicks will
otherwise look like unpaired button presses.
http://bugzilla.gnome.org/show_bug.cgi?id=593504
There's seldom a good justification for connecting to signals on
yourself rather than using the default handler slots in the class.
But in particular using the default handler slots means that
an application can connect to ::button-press-event and get in
before the default handling, to implement a button that does
something on press.
http://bugzilla.gnome.org/show_bug.cgi?id=593503
Add an 'active' property to ShellButtonBox. This allows ShellButtonBox
to be used as a "toggle button". It's up the application to connect
it to the ::activate signal; there's no default handling of this.
(It's seldom that the only time you want to toggle a toggle button
through the user interface, so you need some connection to the backend
data store in any case. Removing the default handling all-together
prevents weird interactions.)
When we have built-in styling for ShellButtonBox the 'active' state
would be one of the elements that would be affect the styling.
http://bugzilla.gnome.org/show_bug.cgi?id=593502
shell-global.[ch]: Add shell_global_display_is_grabbed() that
uses the newly added meta_display_get_grab_op() to check
for existing grabs.
shell-status-menu.[ch]: Add shell_status_menu_is_active() to
check if the menu is popped up. Check for active grabs before
popping the menu up. Use gtk_menu_popdown() rather than
gtk_widget_hide(). Remove an excess gtk_widget_show() and
some excess casts.
panel.js: Check whether the status menu is popped up after button
release, and if it's not popped up, unhighlight the button.
Reported by Nuno Donato
http://bugzilla.gnome.org/show_bug.cgi?id=593362
gnome-shell.in: Remove the code to replace gnome-panel by attaching
to it with GDB; this was always problematical (required gdb, debug
symbols, finding the pid of gnome-panel, etc.)
gnome-shell-build-setup.sh: Require 2.26 to be in place before building
the shell; remove gdb from the list of required packages.
http://bugzilla.gnome.org/show_bug.cgi?id=593325
This is a Box subclass which adds several signals useful for implementing
"button like" behavior, such as hover and pressed states, as well as
click activation on release.
Instead of starting Xephyr automatically, require --xephyr to be
passed explicitly.
This makes the operation easier to understand and has the benefit
of allowing running in Xephyr mode when some other window manager
(like gnome-shell!) is running. We also want to emphasize that
Xephyr is a development tool, and not a good preview of the
user-interface.
http://bugzilla.gnome.org/show_bug.cgi?id=592881
In both, using our allocation directly for the child is wrong; we
should create a new allocation that's our width and height.
In ShellDrawingArea, also need to chain up to parent.
For Firefox/OpenOffice, right now we have a workaround in the
code where we look at their "title" property. However, we
weren't monitoring that property for changes, and I'm fairly
certain Firefox at least was mapping a window and then very
quickly changing its title after. So we need to handle
dynamic changes.
Split out the wm_class mapping from the title hack. It was
messy and weird to have the two mixed because they're not
at all related, and we're not trying to handle WM_CLASS changes
right now.
Explicitly connect to notify::title in the case where we had
a title fallback. When a title changes, just treat it as
an add+remove.
In the Application Menu area in the panel, hook up to app-added
and app-removed so we get notification of the active app changing.
Clean up the vendor prefix handling a bit, and add "mozilla" so that
we pick up "mozilla-firefox.desktop" from Firefox's (recent?) change
to have a WM_CLASS of "Firefox".
Separate the application monitor logic for "tracking" and "usage tracking".
The first means we associate an application with a window. The second
means we count focus time inside that window, and consider the window
interesting from a user point of view.
(Really, should probably split ShellAppMonitor into two classes along
this line, with the second consuming the first).
For the purposes of counting running applications and returning
the list of open windows for an application, skip not-usage-tracked
windows.
Together this allows us to associate the Nautilus desktop window
with the nautilus.desktop, but not show "File Manager" open all
of the time.
We now have functionality in Mutter to grab the keyboard on behalf
of a plugin. This avoids interactions with the key handling code
in Mutter that could leave the user with an inconsistent state
and no way to get out of it.
src/shell-global.[ch]: Change shell_global_grab_keyboard() and
shell_global_grab_keyboard() to shell_global_begin_modal()
shell_global_end_modal() and call mutter_plugin_begin_modal()
mutter_plugin_end_modal() rather than directly grabbing the
keyboard.
main.js: Call global.begin_modal/end_modal from Main.startModal()
and Main.endModal()
altTab.js; Remove call to Main.startModal() - we're letting Mutter
handle modality for Alt-Tab.
main.js lookingGlass.js overview.js runDialog.js: Rename
Main.startModal() to Main.beginModal() for consistency with
naming in mutter and ShellGlobal.
http://bugzilla.gnome.org/show_bug.cgi?id=590686
If Mutter exits with an exit status of 0, then that most likely
means that it was replaced by another window manager and we shoudln't
try to start the previous window manager and the panel.
(We don't actually know about the panel, but assume that if someone
is replacing us they know what they are doing.)
When Mutter exits with a signal, we know we want to restart.
When Mutter exits with a non-signal non-zero exit status, it's
ambiguous - we could be exiting because we lost the connection to
the X server, or because of a assertion failure in gnome-shell.
We assume the latter; if the X server is gone, all that will happen
is a bit of noise.
To know why Mutter exited accurately, we always wait() and
kill() the Mutter process, and then, if running in Xephyr, clean up
Xephyr afterwards. This has the nice side effect of exiting when
gnome-shell does and not forcing the user to close Xephyr manually.
http://bugzilla.gnome.org/show_bug.cgi?id=591171
The design has smaller icons in two columns. Add a new
custom display to docDisplay for it.
Clean up some of the texture cache handling for recent URIs so
it's not size-dependent, since the dash size is now different
from the default GenericDisplay size.
Use MetaGroup for a window when looking up applications. If
we know the application for a TYPE_NORMAL window in the group,
use that.
However, we aren't always going to know the application for a window. In
that case, create a fake one.
ShellAppInfo has a "transient" flag so we know not to write these
fake apps to the usage file.
Clean up the idle focus handler to better handle the case where
no window is focused, and where we don't want to track the
particular window.
Update track_window to create the fake window.
When a window goes away, we want to delete the usage.
Rewrite shell_app_monitor_get_running_apps to be based
on the window_to_app hash, because that's what has the pointer
to ShellAppInfo*. Before we were looking up all ids through
ShellAppSystem, but that shouldn't be holding a ref to transients.
Change the well display icon to be centered, since our icons for
window apps aren't 48 pixels.
We need to use the -lib variant which in turn uses the
GETTEXT_PACKAGE define, because the default translation
domain is actually mutter, not gnome-shell.
$(builddir) is not a standard automake variable. With autoconf < 2.64
it ends up getting set in every Makefile.in to '.' (because autoconf
defines it), but that is no longer the case for 2.64.
Since $(builddir) was always '.', just use that instead.
Infrastructure for localization; hook up intltool, create po/
and po/POTFILES.in. We need to call bindtextdomain/bind_textdomain_codeset.
Switch to gnome-autogen.sh to call intltool.
If we pass in -1 for both width and height, we'd attempt
to scale the image to 0x0. Don't do that; just avoid
scaling the pixbuf and let ClutterTexture do it for us.
Because of a history of cut and paste, the different enumeration
and marshal generation generation shell snippets were using the
same temporary file names. This caused problems for parallel
builds.
http://bugzilla.gnome.org/show_bug.cgi?id=591474
This is a start at the "Active Appliction Item" component of the
shell design. Currently we just show the currently focused
application. When launching a new application, we show that as well.
The implementation here is not complete; basically when launching
we de-focus the active one, and the application well shows the
most recent startup sequence.
This kind of fails in the case of multiple sequences, and we
also don't correctly de-focus the current window in other
launch paths.
Pass the error variable to g_key_file_load_from_data_dirs in
Shell.AppSystem.get_default().load_from_desktop_file again, and
use a try/catch in places.js.
This fixes Shell.TextureCache.get_default().load_thumbnail so
that it can be used to get thumbnails (with an icon matching
the mimetype or, in the worst case, gtk-file, as fallback) for
items which don't have a GtkRecentlyUsed object. This is needed
for the Zeitgeist integration.
- Avoid error '"iconname" may be used uninitialized in this function'
by initializing said variable to NULL.
- Define shell_util_get_file_description as static (like the other
similar functions) to avoid another compiler error.
- Don't save errors from g_key_file_load_from_data_dirs into the
variable "error" (ie. pass NULL to it instead). Without this,
gnome-shell crashes if the key file can't be found (with message
"Error invoking Shell.load_from_desktop_file: Valid key file could
not be found in search dirs").
- Check the result of the load_from_desktop_file() call in places.js,
as it may be null.
Previously, ShellAppSystem only loaded (and cached) the set of
.desktop files from applications.menu and settings.menu, using
the gnome-menus library. The ShellAppInfo structure was
a "hidden typedef" for GMenuTreeEntry.
But we need to support loading an arbitrary .desktop file. Thus,
refactor the ShellAppInfo into a real struct, with a refcount,
and allow it to point to either a GMenuTreeEntry or a GKeyFile.
Also, in the case where we fail to lookup an icon for an
application, ensure we return a 0 opacity texture.
Use ShellGenericContainer to implement a fully dynamic layout
for the application well. It's still fixed to 4 columns by default,
but no longer requires a fixed width to be passed in on start.
With another chunk of work, it could likely try to adjust to
the case where we can only fit fewer than 4 items in the well.
Remove the border highlighting on mouseover, since that caused
reallocations, and the grid layout isn't trivial.
Delete the unused shell_global_get_word_with function.
For both of these, because of optimizations a few patches ago, we
ended up relying on hash table ordering which caused instability
in the application well among other things. Define an ordering
for both.
The favorites is just the order of the GConf keys, and new items
get appended. In the future we should allow insertion at any
point which the grid could use.
For running applications order, define a new "initially_seen_sequence"
transient variable which is just an monotonically incrementing
integer assigned to an application for the first time we saw it
running in this session. When an application is closed, it's reset.
When exiting from --replace mode, we want to start the new
gnome-panel with a reasonable working directory so that if, you say,
open a terminal from it it doesn't start off in the gnome-shell
directory.
(gnome-shell itself is running in $HOME because mutter changes
directory itself at startup.)
Reported by Mathieu Bridon
http://bugzilla.gnome.org/show_bug.cgi?id=591145
Some C library versions have __attribute__((warn_unused_result)) on
fgets(). We really don't care since we are just throwing the data
away, but check the result anyways.
When AM_SILENT_RULES is available, use it to strip down the output
of make so we can see what's important rather than gigantic long
compile lines.
Use 'make V=1' to see everything again.
Fix a couple of places where we had 'cmp' rather than 'cmp' and were
getting standard-error spew about missing files when generating
enum-types.h files.
http://bugzilla.gnome.org/show_bug.cgi?id=591002
src/shell-global.c src/shell-process.c: Remove dead code
src/shell-texture-cache.c src/shell-status-menu.c: Remove
<foo>_new() functions that weren't in the header file and
not used anyways:
src/shell-texture-cache.[ch]: Fix a prototype that used ()
when (void) was intended.
http://bugzilla.gnome.org/show_bug.cgi?id=590998
Move the GStreamer initialization from the Javascript code into
shell_recorder_init(). This avoids a dependency on the GStreamer
introspection information and will make it easier to drop the
gir-repository module dependency.
Said function in genericDisplay.js was returning the index of the
actor based upon its position in the entire list, while everywhere
else indexes relative to the currently displayed page were used.
This made actions in the details pane break (bug #590949), so I
replace it with a new function in shell-overflow-list.c,
shell_overflow_list_get_actor_index, which is page based.
Subclass ClutterGroup (to avoid having to implement all of dispose,
raise, lower, add, etc.), and have it proxy the allocation requests
out into signals. We have to group up the two out parameters
into a struct unfortunately.
Included example code in the C file source for now.
The previous application monitoring code was originally designed
to be based on WM_CLASS, which was then resolved on a server.
We have that resolution code locally now, so instead
of saving WM_CLASS data, save application IDs.
Also, inside the WM we have a much better
infrastructure for tracking windows. In particular, rather
than polling, we can just watch for focus notification on
the display, and window add/remove.
Instead of polling XScreensaver, use DBus to watch org.gnome.Session
which already has an idle time watch.
Now there is no polling at all inside the monitor.
When we fail to load a texture, make sure we keep it 0 opacity to avoid
a white square. Also this is useful to avoid the square while loading
a texture asynchronously.
Corresponding with the design, if an application is in a running
state (has > 0 windows open), draw a glow behind the name.
To make the display look a bit nicer, set the width of each item
to be equal to the longest word among all the items.
Make sure that we calculate the next update time correctly.
Store timeout time instead of the timeout delta, so that it doesn't get outdated.
Create a new callback when the time update happens for the original callback.
Make sure last visited time is updated in the details pane by keeping track
of the description actors created for the detail actors.
Add comments to the new functions.
Avoid depending on gdb for replacing an existing panel, since it
requires debuginfo and gdb installed.
Instead we grab the org.gnome.Panel DBus name, using DBus name
replacement semantics.
Extend ShellTextureCache by adding the concept of a policy, which
we expose to the public API for loading URIs.
This lets us have the shell tell the cache to keep the information
icon texture around forever.
Secondly, fix the caching of recent info; we shouldn't always be
loading the backup pixbuf. Move recent info loading entirely
into ShellTextureCache.
GenericDisplay wasn't quite completely converted to the ShellOverflowList
model. Since the list now holds all actors, the indexing/wrapping
was incorrect.
Add a property which lets us keep track of how many items are displayed,
use this in genericDisplay.
Avoid setting selectedIndex to -2 when going up with no items.
If we're not displaying any results at all, don't attempt keynav (for now).
Make the ClutterText and ClutterTexture from the status menu
button available to JavaScript, and from there improve the
font definition of the user name.
shell-status-menu.[ch]: Add public get_name() and get_icon()
functions that return the user name label and icon
texture, remove the markup from update_name_text().
panel.js: Set the font for the button consistently with that
of the other panel labels.
Move thumbnail creation into ShellTextureCache. It's now asynchronous,
and we cache the result.
Create a DocManager class which keeps around the DocInfo objects between
invocations. This is also where we ensure we remove thumbnails for
recent items not known anymore.
Before, we looked up application data in several ways; the ShellAppSystem
exported just application ids (though it parsed the .desktop files internally),
and we'd create a Gio.DesktopAppInfo object (reparsing the desktop file again),
wrapping that inside a JavaScript AppInfo class, and finally the AppDisplay
would again parse the .desktop file to get the categories.
Also, to look up applications by id previously, we traversed the entire
menu structure each time.
Some qualities such as the NoDisplay flag were not easily exposed in the old
system. And if we wanted to expose them we'd have to change several different
application information wrapper classes.
All in all, it was quite suboptimal.
The theme of this new code is basically "just use libgnome-menus". We do
not call into Gio for app lookups anymore. The new Shell.AppInfo class
is a disguised pointer for the GMenuTreeEntry item.
To fix the caching, we keep a simple hash table of desktop id -> ShellAppInfo.
ShellDrawingArea is a size-independent wrapper for a ClutterCairoTexture.
Useful when drawing non-fixed size areas.
ShellStack is a simple container class which holds items
in a completely overlapping Z stack. The main difference
from ClutterGroup is that items will be constrained to
(and allocated) the size of the stack, not getting their
preferred size always.
Although methods like gconf_client_get/set_bool() and such are usable
from gjs, get_list/set_list is not, since there's only one method for
all list types. So ShellGConf wraps GConfClient and adds separate
typed list methods.
Also, add a detailed "changed" signal that can easily be connected to
from js, since we can't currently use gconf_client_notify_add()
directly.
Searching across NoDisplay desktop items can produce weird
results to the user (including duplicates, and items that
aren't really applications at all.) So, don't include them
normally.
But continue including NoDisplay items when we look up the
desktop file for a window, since we want to catch applications
like Evince and Nautilus which are otherwise NoDisplay.
http://bugzilla.gnome.org/show_bug.cgi?id=587548
This is not a complete patch; it doesn't attempt to handle the homogenous
property or column major.
(Based on patch by Colin Walters <walters@verbum.org>)
http://bugzilla.gnome.org/show_bug.cgi?id=587720
Add a GConf key for favorites, and API for retrieving them.
Also add shell_app_system_lookup_basename, which we use from
the app monitor to look up WM_CLASS ids.
Track all windows; at the time of opening (and shell startup)
we call into ShellAppSystem to take the WM_CLASS property and
try to find an associated .desktop file.
Add mozilla-firefox to the list of our WM_CLASS workarounds.
Add shell_global_get_screen, since it's often used.
Fix up the comments about the horizontal gradient code and use 8x1 texture
instead of 8x8.
Make sure the values we assign to the three-stop horizontal gradient
require the use of the three stop gradient, with the middle value not being
right between the side values.
Display the results pane above the workspaces. The results pane is somewhat
transparent and has a blue gradient background. The dash pane is slightly
transparent and also has a blue gradient background.
The results pane shows up when a More control is clicked. It disappears when
a Less control is clicked, an area outside of the dash area is clicked,
an item starts being dragged, or the overlay mode is exited.
Add shell_global_create_horizontal_gradient() to shell-global.[ch]
Currently we position the user status menu at the upper left of
the user status button. Then, because Mutter is inappropriately
positioning override-redirect windows it get shoved into the
workarea. Once that bug is fixed (bug 582639), we'll have to
position the menu ourselves.
This patch aligns the user status menu at the left end of
and beneath the top panel.
http://bugzilla.gnome.org/show_bug.cgi?id=586156
Currently function shell_get_thumbnail_for_recent_info located in
src/shell-global.c is used to get thumbnails for recently used files.
However, it only works if you have a GtkRecentInfo object for the file,
even though the thumbnail generation code doesn't depend on it. This commit
renames the function to shell_get_thumbnail and makes it generic so that it
just takes two strings: a filename and a mimetype.
When there is no root pixmap, the result will be a CoglMaterial
with a layer with no texture, and that causes a crash.
Work around this by supressing painting the root pixmap actor
when there is no root pixmap.
http://bugzilla.gnome.org/show_bug.cgi?id=585196
- clutter_actor_get_transformed_position()/size() return floats
- clutter_stage_get_actor_at_pos() takes a pick mode
- ClutterTimeline no longer has a concept of frames
- ClutterUnit is now replaced by float
- cogl_texture_new_from_data() signature changed
http://bugzilla.gnome.org/show_bug.cgi?id=585013
With clutter changes, we can now no longer clone an actor unless
it is part of a stage. So, we hide the root pixmap source, and
add it.
This means that the logic to free the source actor when the
last clone disappears no longer applies, since the stage will also
reference it; so we just leave the actor around permanently.
http://bugzilla.gnome.org/show_bug.cgi?id=585012
We need a foreach_with_internals() function that includes the
background_texture/background_rectangle actors, so that states
will properly be updated on map/unmap/etc.
http://bugzilla.gnome.org/show_bug.cgi?id=585007
- ClutterUnit is now replaced with float
- allocate() now takes flags rather than absolute_origin_changed boolean
- cogl_texture_new_from_data() signature changed
http://bugzilla.gnome.org/show_bug.cgi?id=585007
The code here is significantly cleaner if we use the data Metacity
already has cached and validated, rather than talking to X directly.
Also some preparatory work for extending the monitor API by
clarifying the name of the (current) main entry point.
To avoid loading applications from two different systems, use
ShellAppSystem solely. This unifies the initial load and the
reload.
Extend ShellAppSystem to also load settings/preferences, and
ensure they appear in the search.
We need to include the icon size in the data we pass to on_pixbuf_loaded()
so that we can include it in the key we use when caching the icon
Currently we save icons in the cache at size 0 but look them up at size 48
so no caching occurs.
http://bugzilla.gnome.org/show_bug.cgi?id=583503
Recent gjs changes have made it log most types of messages (including
log() calls) only to a configured log file and not to stderr. So,
set GJS_DEBUG_OUTPUT=stderr to make *stderr* the log file and get
our log() calls back.
Add a ShellTextureCache class which loads (and can cache)
pixmap->texture conversions. This fixes a problem with the
async code in ClutterTexture that it was lower priority
than animations, and also ensures we're really only
loading these pixbufs once in the icon case.
We need to reset the popularity GSList* at start, and everytime we load data about a another activity. This also implies fixing the typo about (activity != -1).
Thanks to Dan Winship. http://bugzilla.gnome.org/show_bug.cgi?id=582215
If a file already has a failed thumbnail indicator, don't try to
thumbnail it, and if thumbnailing fails, create a failed thumbnail
indicator. (In particular, so that if thumbnail creation times out, we
don't keep retrying and eventually timing out every time the user
opens the overlay.)
http://bugzilla.gnome.org/show_bug.cgi?id=568081
This solves several issues:
- use built-in default so that app monitoring is enabled when schemas are not installed
- don't start/stop timers without checking their previous state
- unreference the default GConfClient
- use #define for the GConf key path
Just because ShellTrayManagerChild had a 'manager' field, I shouldn't
have assumed it was actually being set; fixes a crash with tray icons
that don't support RGBA visuals.
Unless we're running gnome-shell from the source directory, we shouldn't
use the .la file as the mutter plugin. Instead, we use the dynamic
library.
Closes: bgo#581327
* Rename ShellGtkWindowActor to ShellGtkEmbed, and make it require
a ShellEmbeddedWindow rather than a general GtkWindow.
* Add ShellEmbeddedWindow subclass of GtkWindow that bypasses most
of the GtkWindow complexity for size negotiation, and calls out
to a clutter actor instead; also automatically handle reparenting
the GtkWindow into the stage window.
* Use the reworked ShellGtkEmbed in ShellTrayManager, this simplifies
the code a bit, and more importantly results in the tray icons
having the correct size negotiation, rather than having a fixed
24x24 size.
http://bugzilla.gnome.org/show_bug.cgi?id=580047
This is a fairly simple implementation, not all that different from
plain metacity's. Further improvements could be made to
js/ui/altTab.js in the future.
http://bugzilla.gnome.org/show_bug.cgi?id=580917
Calling gdk_window_get_events() then gdk_window_set_events() will
remove "exotic" X event masks that GDK doesn't know about like
SubstructureRedirectMask. A window manager that doesn't select
for SubstructureRedirectMask on the root window is no longer
really a window manager, so various Bad Things were happening.
We can just piggy-back on Mutter selecting for PropertyNotify
events on the root window, so removing the code works fine.
http://bugzilla.gnome.org/show_bug.cgi?id=580572 (reported by Mike Bursell)
Now code can call Main.addShellActor(actor) to declare that that actor
is part of the shell, and so it should (a) be protected by wm struts, and
(b) be part of the stage input area, and then that code automatically
deals with updating if the actor changes size or visibility.
Use the actual image from the file for expanded mode previews for image files. Use the pixbuf loader to set the appropriate image size as soon as the image is prepared, but before it is loaded, to avoid loading large images. Apply the pixbuf orientation setting so that the image is properly rotated. Preserve the original size of the image if its dimensions are smaller than the space available.
Make sure we provide the accurate available width for the details actor. This
width has to exclude the padding and border width. Also provide the available height for the details actor.
Use code copied from GLib to close all file descriptors before we reexec ourselves
on the restart Alt-F2 command. This fixes serious memory leaks when we have mapped
graphics buffers.
http://bugzilla.gnome.org/show_bug.cgi?id=579776
The overlay looks nicer with the root window pixmap drawn on the
background. It is scaled up to twice the size, with positioning
based on the rule of thirds.
The sideshow animations shown when entering or leaving the
overlay and toggling the extended view were implemented by
Marina Zhurakhinskaya. They replace the old method of having a
black rectangle behind the workspaces that partly covers the
sideshow during transitions.
configure.ac: Add gdk-x11, clutter-x11 and clutter-glx modules.
overlay.js: Add a root window pixmap actor, make sideshow width
definitions more logical, replace the way the sideshow
animates when entering or leaving the overlay.
workspaces.js: Remove the backdrop, add helper functions for the
overlay transitions.
shell-global.[ch]: Add a method that creates an actor displaying
the root window pixmap and returning clones of it.
Icons with real alpha transparency weren't being drawn correctly
because the NaTrayIcon was being set redirected in addition to the
window holding it. And nothing drew the icon onto the window holding
it. Use the newly added na_tray_icon_set_composited() to fix.
na-tray-child.[ch]: Add na_tray_child_set_composited() to allow the
application to modify the behavior where gdk_window_set_composited(TRUE)
is called for icons with alpha. Rename na_tray_child_is_composited() to
na_tray_child_has_alpha() to better reflect the meaning and fix things
so that it can be called at any time and not only after the icon is
realized.
na-tray.c: Adapt to na_tray_child_is_composited() rename.
http://bugzilla.gnome.org/show_bug.cgi?id=579454
Merge from gnome-panel
2008-12-09 Vincent Untz <vuntz@gnome.org>
* na-tray-child.c: (na_tray_child_size_request): remove translatable
string in a warning
ShellAppMonitor now depends on gmenu to load menus.
Use the menu data from ShellAppMonitor to show a menu list.
GenericDisplay implementations can now have a sidebar area. We
handle keystrokes such as left/right explicitly.
Some internal API changes to account for the fact that a display
can have another filter in addition to the search.
If Xephyr isn't installed currently src/gnome-shell raises
an exception which isn't at all obvious without looking at
the source. This commit catches the exception and replaces
it with a more informative error message.
Change the overlay behavior to display more details about an item on single
click and launch it on double click.
When the item is clicked on in the expanded view, the details are shown in the
area on the right that is allocated for showing details. The details pop-up is
not shown for the item that was clicked on, but it is shown for other items on
hover and for the item that was clicked if the mouse pointer is moved back to
it.
Both hovering and single clicking results in the details pop-up being shown in
the regular view. (Single clicking actually doesn't do anything in the regular
view, but the details pop-up is shown due to hovering within the time it takes
to perform a single click.)
The overlay now uses 3 columns on the wide screen for displaying items in the
expanded view. This allows keeping the size of the details area the same for
expanded and regular views.
Add shell_get_button_event_click_count() to shell-global.[hc] to retrieve
the click count for button press and release events.
Add selectedItemDetails public variable actor to the generic display to
contain the details of the selected item and be shown in the overlay when
it is in the expanded view mode.
Fix the bug when the sideshow section would loose selection in the expanded
view if it did not have any items, and would not regain it if it was repopulated
with some items (e.g. when the search string changes).
The sideshow no longer takes overlay parent and width as constructor arguments.
It is added to the overlay inside the overlay code and manages its own width
instead (which is ok, since it is pretty much a private class within overlay).
Clean up the way selection is moved when an item is launched in order to have
selection on click and activation on double click be implemented in a similar
fashion. An unneeded _activatedItem variable in generic display was removed,
and the selected item is activated instead when necessary. The flow of processing
signals changed so that generic display no longer waits for the selection from
a different sideshow section to be removed before selecting an item that was
clicked on. This removed the need for doActivate() function.
The panel looks nicer when it is drawn as a semi-transparent gradient
above the background color.
shell-global.[ch]: Add a function that creates vertical gradient actors.
panel.js: Change the look of the panel and put the tray in a framed box.
overlay.js: Extend the overlay background to behind the panel.
For development and demonstration purposes, it's neat to be able to
record a screencast of gnome-shell without any external setup.
Built-in recording can also give much better quality than is possible
with a generic desktop recording, since we hook right into the paint
loop.
src/shell-recorder.[ch]: A general-purposes object to record a Clutter
stage to a GStreamer stream.
src/shell-recorder-src.[ch]: A simple GStreamer source element (similar
to appsrc in the most recent versions of GStreamer) for injecting
captured data into a GStreamer pipeline.
src/test-recorder.c: Test program that records a simple animation.
configure.ac src/Makefile.am: Add machinery to conditionally build
ShellRecorder.
tools/build/gnome-shell-build-setup.sh: Add gstreamer packages
to the list of required packages for Fedora.
js/ui/main.js: Hook up the recorder to a MetaScreen ::toggle-recording
keybinding.
http://bugzilla.gnome.org/show_bug.cgi?id=575290
- Force off text mipmapping - it isn't useful to us and causes
problems with old (pre-GEM) Intel drivers.
- Set Pango font options explicitly to enable font hinting.
tools/build/gnome-shell.modules: Point at master branch of Clutter (0.9)
and make gobject-introspection a dep of Clutter.
configure.ac src/Makefile.am: Use Clutter-0.9
js/ui/button.js js/ui/genericDisplay.js js/ui/overlay.js js/ui/panel.js
js/ui/runDialog.js js/ui/workspaces.js src/shell-status-menu.c:
Use ClutterText instead of ClutterLabel and ClutterEntry
js/ui/workspaces.js js/ui/genericDisplay.js: Use ClutterClone instead
of ClutterCloneTexture
src/shell-global.[ch]: Add Shell.get_event_key_symbol() to workaround
unaccessibility of clutter_key_event_symbol() to use.
js/runDialog.js js/overlay.js: Use Shell.get_event_key_symbol() as
appropriate.
Positioning actors at non-integer positions produces bad looking
text. Therefore, do centering as x + round((a-b)/2) rather than
x + (a-b)/2. (This does mean that centering will be less accurate
if an actor is scaled up by a lot, but it's pretty reasonable
to assume that scaling only occurs during an effect and static
displays are unscaled.)
- include only <clutter/clutter.h>
- cogl_rectangle() takes x1/y1/x2/y2 instead of x/y/width/height
- cogl_color() renamed to cogl_set_source_color4ub()
- use explicit CoglMaterial in BigRectangle to combine a texture
and a color.
- Remove defensive calls to cogl_enable(0) - cogl_enable() no
longer exists (enable flags are part of the material)
- Use ClutterCairoTexture actor (from Clutter) rather than ClutterCairo
This ensures that any popup windows we create in process, such as
the user status menu, will get X events delivered even if the user clicks
on the stage input area.
In particular, this lets us track the actor's location better; the old code
didn't work if the actor was put into a container that got moved around.
Part of #568712.
svn path=/trunk/; revision=167
main.js: set desktop environment to "GNOME" so that GIO can determine correctly which applications should be shown in the menus.
appDisplay.js: filter out applications that should not be shown in the menus, check if get_executable() for GAppInfo is not null before using it
svn path=/trunk/; revision=163
This is implemented as a separate process, since creating and running
toplevel windows from inside Metacity has issues.
We now grab a DBus name, and exec the child process. The child monitors
our name to know when to exit.
svn path=/trunk/; revision=153
gjs requires flags types to be registered with GObject to
work properly; g-ir-scanner requires the get_type() functions
to be present in a scanned header in order to find the
GObject type for a flag. So pass {tidy,big}-enum-types.h to
the scanner as appropriate.
svn path=/trunk/; revision=148
The plugin-gobject branch of Mutter (now merged into our branch) converts
plugins to more-standard GObject GTypePlugin, with the plugin itself
being a GObject class.
gnome-shell-plugin.c: Switch plugin to the new scheme
shell-wm.[ch]: Forward effect signals to ShellWM rather than hooking
directly into the plugin vtable.
default: Remove this (accidentally committed) file
svn path=/trunk/; revision=133
We don't want the X server to draw the icons onto the screen, so
use pass automatic=FALSE to clutter_x11_texture_pixmap_set_window();
causing CompositeRedirectManual to be used.
svn path=/trunk/; revision=122
shell-global.[ch]: Replace shell_global_focus_stage()
with shell_global_grab_keyboard()/shell_global_ungrab_keyboard()
main.js: Add startModal()/endModal() functions to go modal and
undo that.
run_dialog.js overlay.js main.js: Use startModal() for the overlay
and for the run dialog.
http://bugzilla.gnome.org/show_bug.cgi?id=561880
svn path=/trunk/; revision=83
shell_tray_manager.c: Add a bg-color property and implement it
by setting a 1x1 pixmap of the right color as the background.
Also, make the colormap of the tray manager window match that
of the socket. That should (untested) make transparency work
properly if the tray icon supports it.
panel.js: Set the bg-color property of the tray manager to
match the panel.
http://bugzilla.gnome.org/show_bug.cgi?id=561872
svn path=/trunk/; revision=82
Add a a method shell_global_focus_stage() to set the
input focus to the stage window, so that Clutter gets
keyboard events.
Adapted from patch in Bug 561299 from Colin Walters
svn path=/trunk/; revision=59
Move libtidy and libtray from lib_LTLIBRARIES to noinst_LTLIBRARIES; this keeps
automake from passing an -rpath when building them, which in turn convinces
libtool to build them as convenience libraries rather than shared objects.
svn path=/trunk/; revision=55
* configure.ac: Look for paths to all the g-i tools, and
also get the full path to metacity
* src/Makefile.am: Remove noinst library, not necessary now
svn path=/trunk/; revision=45
notification are to the panel. A bit warty, but we don't know how we want
the final UI to look anyway. (The fact that transparency doesn't work is
a known bug.)
svn path=/trunk/; revision=44
For experimenting with using tidy, import TidyButton and TidyGrid
(+ dependencies) into our source tree and set up build machinery
to build them and build a typelib for them.
The sources are build right into libgnome-shell.so, so the Shell.gir
and Tidy.gir actually point to the same shared library.
src/Makefile-tidy.am: Build libtidy-1.0.la
src/Makefile.am: Include built tidy into gnome-shell.la and
build Tidy-1.0.typelib
src/tidy/*: Add some source files from Tidy
svn path=/trunk/; revision=42
When we are animating the overlay, we don't want to be continually
redrawing the (obscured) window actors.
src/shell-global.c: Add 'window-group' property to expose the group
holding the window actors.
js/ui/overlay.js: Hide the window group while the overlay is up.
svn path=/trunk/; revision=39
Make sure that all functions in metacity-symbols.c with a return value
return something so that the compilation is clean.
svn path=/trunk/; revision=38
Installing the plugin typelib into $(libdir)/girepository is
non-sensical since no other program would want to reference it.
Move it to $(pkglibdir)/girepository instead. (Will need to set
environment variables to find it when we make installed operation
work.)
svn path=/trunk/; revision=25
shell-global.[ch]: Add shell_global_get_windows() to get
the list of all MutterWindow for the screen
Makefile.am: Include the metacity typelib so that we can
reference the MutterWindow type
js/ui/overlay.js: Cascade the open windows, scaled down
in the overlay
svn path=/trunk/; revision=24
By default, mutter doesn't pass events to clutter. We need to add an
xevent_filter method to our plugin and do that ourselves.
svn path=/trunk/; revision=7
A plugin for metacity-clutter (mutter) that initializes Javascript
and via Javascript adds an object to the mutter scene graph.
src/gnome-shell-plugin.c: metacity-clutter-plugin
src/shell-global.[ch]: Simple global-information object
js/: Directory for javascript
scripts/start-in-Xephyr: Launch metacity with our plugin
"nested" within an Xephy X server
svn path=/trunk/; revision=2
