When the app well doesn't contain any applications, it displays a placeholder text
to indicate that it's a drop target. When porting WellGrid from St.Bin to St.BoxLayout,
the call to set_child() to set the text was overlooked.
https://bugzilla.gnome.org/show_bug.cgi?id=617281
Currently, only the base style class is set in the constructor, the
style update according to the state of the represented app is deferred
until the actor is shown.
As existing icons are destroyed and recreated when the number of icons
changes, this behavior causes the icons of running apps to flicker if
CSS transitions are used.
Set the style directly in the constructor and update the code to not
delay style updates until the actor is shown - StWidget does defer
expensive calculations until the actor is mapped anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=620782
As the search entry captures the pointer when activated, the hover
state is not updated properly when the activation is cancelled
(either by clicking outside the entry or by hitting Escape).
Update the state manually in these cases.
https://bugzilla.gnome.org/show_bug.cgi?id=611095
Separate out the main app view into different sections based on the categories
in the desktop file. The configuration is done via gmenu and the desktop menu
specification, we set XDG_MENU_PREFIX="gs-" on startup, so that gmenu reads
gs-applications.menu, which we install.
There is no support for "submenus" - only the menus directly under
Applications will be displayed as categories.
https://bugzilla.gnome.org/show_bug.cgi?id=614131
Currently we only relayout when the screen size changes, this gets
the cases where a monitor gets added/removed but not when the primary
monitor changes.
We need to relayout on all monitor layout changes.
Remove ShellGlobal::screen-size-changed signal as it is no longer used, Gdk is
used to track changes now.
A ShellGlobal::gdk-screen property is added for this purpose.
https://bugzilla.gnome.org/show_bug.cgi?id=620377
In all the cases where we activate GNOME 2 UI, e.g. the shutdown
dialog, pop out of the overview. Otherwise, it's fairly broken
since you won't see the result of your action.
https://bugzilla.gnome.org/show_bug.cgi?id=620525
Currently we don't get any drop events for dual screen modes with a screen
at the right, and behave weird by hardcoding the screen size and 0 as drag
edges.
Fix that by spawning the drop group over the whole stage and take the primary monitors position and size into account in _handleDragOver.
https://bugzilla.gnome.org/show_bug.cgi?id=620378
This patch adds ISO week dates to the calendar. Week dates are an
often used feature in business and government offices. Can be turned
on through gconf, off by default.
https://bugzilla.gnome.org/show_bug.cgi?id=603532
When dragging windows in linear view, the workspace zooms out to
allow moving the window to other workspaces. Enable the same
behaviour for items dragged from the dash.
https://bugzilla.gnome.org/show_bug.cgi?id=618055
While zoomed out, the workspaces view's drop target spans the entire
monitor to implement reactive screen edges. When a drop event is not
handled by the view, an attempt is made to pass it on down the stack,
but it doesn't work properly. Fix it by iterating the target's parents
as well.
Also improve the code which translates dnd coordinates to target
positions.
https://bugzilla.gnome.org/show_bug.cgi?id=619203
Ignore the fullscreen flag when we are in the overview,
otherwise we might up not showing actors like the panel even though
they have visibleInOverview set to true.
https://bugzilla.gnome.org/show_bug.cgi?id=619693
Add events when we start preparing a frame and finish preparing
a frame. (In addition to measuring property-updating overhead, this allows
us to see the interval between finishing preparing a frame and starting
painting the frame, which is the relayout time.)
https://bugzilla.gnome.org/show_bug.cgi?id=619515
Currently, the drag and drop code assumes that on a successful drop
the target will either consume the drag actor or that it is otherwise
OK to destroy the actor.
As the drag behavior for window preview was changed, dropping a preview
on the dash now results in the preview being swallowed - to fix, add an
option to restore the actor in case of a successful drop as well.
https://bugzilla.gnome.org/show_bug.cgi?id=619203
The activities overview is not a place where we expect users to
interact with a specific application, so showing the application
menu there is misleading.
https://bugzilla.gnome.org/show_bug.cgi?id=618479
There are some places in the code where we use both fixed positioning
and CSS. Currently we use either a combination of ClutterGroup and StBin,
or we uses StBoxLayout with fixed positioning. Replace those with the new
StGroup container.
https://bugzilla.gnome.org/show_bug.cgi?id=613907
First, simply set the ellipsize flag on the application menu labels.
Next, rework how we lay out the panel components so that the center
box is always centered and constrains the left and right, rather
than pushing it around.
Previously, as part of making the shell not obviously explode if
one had a lot of tray icons, we allowed them to push the clock over.
Instead, go back to just failing in this case; we need to exile legacy
tray icons, not be slightly less ugly.
https://bugzilla.gnome.org/show_bug.cgi?id=592640
SwitcherList.actor is no longer a St.BoxLayout but a
GenericContainer now, so the hack in AppSwitcher._getPreferredHeight is no
longer needed (it is called with the correct width now).
https://bugzilla.gnome.org/show_bug.cgi?id=613194
Switch from having separate METRICS and METRIC_DESCRIPTIONS objects
in a perf module to a single METRICS array. This is done so the
perf module can define the units for each metric.
In addition to improving the output in the web interface, the purpose
of having units is to give some clue about how to pick from multiple
values from different runs. In particular, with the assumption that
"noise" on the system will increase run times, for time values we want
to pick the smallest values, while for "rate" values, we want to pick
the largest value.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
When SHELL_PERF_OUTPUT is set, instead of just dumping out the metrics, dump
a more complete report with:
- Event descriptions
- Metric descriptions and value
- Event log
Helper functions shell_perf_log_dump_events() and shell_perf_log_dump_log()
are added to ShellPerfLog to support this. The gnome-shell wrapper is adapted
to deal with the changed report format.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add gnome-shell options:
--perf-iters=ITERS"
Numbers of iterations of performance module to run
--perf-warmup
Run a dry run before performance tests
Make a successful run of a performance test return 0 not non-zero,
and handle the difference between that and a 0-exit in normal
usage (meaning replaced) in the wrapper.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add some basic statistics for allocated memory based on mallinfo(),
and use that to define two metrics:
usedAfterOverview: bytes used after the overview is shown once
leakedAfterOverview: additional bytes used when the overview is
shown a second time.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
We want to be able to summarize the behavior of the shell's
performance in a series of "metrics", like the latency between
clicking on the Activities button and seeing a response.
This patch adds the ability to create a script under perf/
in a special format that automates a series of actions in the
shell, writing events to the performance log, then collects
statistics as the log as replayed and turns them into a set
of metrics.
The script is then executed by running as gnome-shell
--perf=<script>.
The 'core' script which is added here will be the primary
performance measurement script that we use for shell performance
regression testing; right now it has a couple of placeholder
metrics.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
To support scheduling performance-measurement scripts that want to run
a number of actions in series, add shell_global_run_at_leisure() to run
a callback when all work is finished.
The initial implementation of this is not that accurate: we track
business in Tweener.js via new shell_global_begin_work(),
shell_global_end_work() functions, and we also handle the case
where the main loop is continually busy.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
We don't need to reposition the menu every time its button is
allocated; we can just stick it in the right place when we pop it up
(which is guaranteed to not be during a layout cycle).
(This means that now we won't reposition the menu if the button
moves/resizes while the menu is already popped up, but it's not clear
that we'd want it to anyway, since that could easily result in the
user selecting the wrong item, etc.)
Also, we don't need to override the menu's width any more, so remove
that.
https://bugzilla.gnome.org/show_bug.cgi?id=619113
* Align the icons inside text
* Add application name to Quit
* Fade in/out the menu
* Drop some padding around the edges
* Add padding around the separators
* Use a gradient for separators
https://bugzilla.gnome.org/show_bug.cgi?id=618460
Per design discussion, change things back so that when choosing
an individual window, we raise only that window. However
when we select an application, raise all windows.
A behavioral change required to clearly differentiate these
is that when the window thumbnail list is popped up, it no
longer has the first window selected by default. Therefore
the user has to explicitly press the down arrow or use the
mouse to enter individual window selection mode.
https://bugzilla.gnome.org/show_bug.cgi?id=617959
