Commit Graph

8004 Commits

Author SHA1 Message Date
Florian Müllner
88244222fd workspace: Use new helper function when accepting drops
Moving a window from a secondary monitor to a non-active workspace
currently fails for the aforementioned reasons.

Use the newly added helper function to address this.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/893

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2259>
2022-03-31 17:56:49 +02:00
Florian Müllner
1cb01ec5b1 main: Add help function for moving window to monitor/workspace
MetaWindow.move_to_monitor() can no longer be assumed to have updated
the monitor on return, as under wayland, if the move involves a size
change, the monitor state will only be updated after the new size has
been synced with the client.

If that happens, trying to change the workspace of the moved window
fails, as it is still considered on-all-workspaces until it leaves
the secondary monitor.

It's possible to work around this by waiting for the window to actually
enter the requested monitor. That's finicky enough to warrant a helper
funtion, so add one.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/893

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2259>
2022-03-31 17:56:41 +02:00
Yosef Or Boczko
44d819149f calendar: Fix alignment of world clocks header in RTL
Signed-off-by: Yosef Or Boczko <yoseforb@gmail.com>
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2240>
2022-03-28 18:39:13 +02:00
Florian Müllner
421591359f messageList: Center-align close button vertically
Otherwise it may end up stretched when using larger text.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2257>
2022-03-28 14:50:18 +00:00
Marco Trevisan (Treviño)
8ba7f0f4a9 shellDBus: Actually make ScreenTransitionAsync async
We called such function async but we didn't awaited for the
checkInvocation result in the proper way.

So on failure the shell would report an unhandled promise rejection.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2258>
2022-03-28 15:36:18 +02:00
Raghuveer Kasaraneni
0e45273330 dateMenu: Limit timezone offset hours to integers
If the timezone offset calculation in the World Clocks contains non-zero
minutes, then a decimal Hours value is being displayed. Limit the Hours value
to integers by using Math.floor().

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2255>
2022-03-21 19:29:11 +00:00
13r0ck
85b51b9974 layout: Check again for primary monitor after startup animation idle
On some hardware combinations the display can be known, then unknown again. Meaining that
when the update monitors function is called it will have a value, then be called again
setting this.primaryMonitor to null. If the timing is just right gnome shell will
loadBackground, then by the time the animation is ready the monitor will be gone,
thus methods will be called on a null value. This adds more checks for a valid
primary monitor, and wont play the animation until the system is idle AND has a valid
priamry monitor.

Fixes: #5003
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2144>
2022-03-20 22:48:51 +00:00
Anupam Kumar
db68749335 appDisplay: Home and End keys for app grid navigation
Include Home and End keys for consistent behaviour with respect to
overview navigation.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2241>
2022-03-20 22:19:25 +00:00
Florian Müllner
034e59af2d dateMenu: Mark string for translation
T_() is a convenience shortcut for looking up a string from the
locale defined by LC_TIME, but it isn't recognized as a gettext
keyword. To do that, we also have to wrap the string in N_() or
NC_().

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2246>
2022-03-20 22:12:32 +00:00
Florian Müllner
6c44162c17 switchMonitor: Fix switching configuration
Since commit 37271ffe70, we pass an explicit `switchType` instead
of the selected item's index to select a configuration. Alas, the item
use `switchMode` as property name, so we always end up passing `undefined`.

Change both to `configType` which matches the API on the other end.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5217

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2245>
2022-03-20 22:04:55 +00:00
Daniel van Vugt
2127222b39 overview: Remove desktop fade logic
It existed to fade out/in `nautilus-desktop` for the overview, but it only
ever worked for X11 sessions (`Meta.WindowType.DESKTOP`) and
`nautilus-desktop` no longer exists anyway.

While I had suggested extending it in the past (!1395), that work was
never finished and since then the DING extension has implemented its
own visibility toggling. There seems little value in keeping the old
fade logic around in gnome-shell. Removing it actually fixes a bug with
DING (https://launchpad.net/bugs/1965072).

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2244>
2022-03-20 21:57:51 +00:00
Adam Williamson
c5f6482705 appDisplay: Avoid double slash when creating default folders
Creating these default folders still doesn't work. After some
investigation I found that's because the template we use for
the path when creating the `child` `Gio.Settings` instance
results in a double slash - it comes out as e.g.
/org/gnome/desktop/app-folders//folders/Utilities/ . dconf does
not gracefully handle this as many other things that handle
paths do, it considers it a programmer error. It results in
error messages like:

dconf_changeset_set: assertion 'dconf_is_path (path, NULL)' failed

which is slightly confusing. Anyway, we fix it by removing a
slash from the template.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2242>
2022-03-20 21:50:25 +00:00
Jonas Dreßler
95f4a1ecd6 windowPreview: Avoid LEAVE events triggered by grab of our own StButton
Since the ClutterGrab rework, grabbing properly emits crossing events.

StButtons take a ClutterGrab as soon as they are pressed, so pressing
the close StButton of the WindowPreview takes a grab and causes a
LEAVE+key-focus-out event getting sent to the WindowPreview. This in
turn makes us hide our overlay (which the StButton is part of). We
automatically ungrab ClutterGrabs when hiding actors, so the StButtons
grab now gets released again, key-focus and hover state are updated
again and we emit an ENTER event to the WindowPreview. The preview now
tries show its overlay again and things explode because we re-enter the
mapping machinery.

For the LEAVE event we can break this cycle by detecting the GRAB_NOTIFY
crossing event of our own StButton and not reacting to that.

We should do the same for the key-focus-out event, but these don't pass
context information like a GRAB_NOTIFY flag yet, so just check the
current grab actor here.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3165

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2231>
2022-03-20 21:42:16 +00:00
Jonas Dreßler
64e4d5df48 popupMenu: Fix usage of GRAB_NOTIFY ClutterEventFlag
Actually the flag gjs gives us here is called
Clutter.EventFlags.FLAG_GRAB_NOTIFY, so fix that.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2231>
2022-03-20 21:42:16 +00:00
Jonas Dreßler
b17f00cfb1 workspace: Force creating new layout when there's no allocation yet
Commit ba23279f1f was aimed at fixing a
bug where the layout is frozen so early that we don't have an existing
one to re-use, because no allocation cycle happened yet. It tried to fix
that by forcing the creation of a layout when needsLayout === true,
this turned out to be a bit too much, as it also forced creating a new
layout when the layout was frozen after closing a window (which would
set needsLayout to true).

To fix this regression and still avoid reintroducing the bug the
previous commit fixed, tighten the check a bit and only force creating
the new layout when there's no allocation yet. This makes freezing the
layout after closing a window work again.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2236>
2022-03-13 00:16:19 +00:00
Jonas Dreßler
7bf8f40c84 magnifier: Update zoom region right after enabling the magnifier
We want the zoom region to always be where the mouse cursor is, so make
sure to update it initially, too.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2234>
2022-03-13 00:12:18 +00:00
Jonas Dreßler
f13a6145fd magnifier: Properly hide the second (real) cursor
The magnifier uses a PointerWatcher (which is based on a simple timeout
source) to update the zoom region based on the current mouse cursor
position 60 times a second. When updating the zoom region, it would also
hide mutters cursor using meta_cursor_tracker_set_pointer_visible().

Since a few months, mutter has decoupled the handling of input events
from the monitor refresh rate though, which means it's no longer
guaranteed that the cursor changes only 60 times a second (on higher
refresh rate monitors it actually never was). This means mutter might
show the cursor more often than 60 times a second, while we hide it only
60 times a second, leading to a flickering second cursor.

To fix this, implement the cursor-hiding by listening to
MetaCursorTrackers visibility-changed signal, and immediately hiding the
cursor again when it's shown.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2234>
2022-03-13 00:12:18 +00:00
Jonas Dreßler
aa9edc37a5 workspaceAnimation: Get time outside of the animation-complete callback
We want to use the current event time for activating the workspace, and
this time is only available when calling global.get_current_time() or
Clutter.get_current_event_time() from the context of an event handler.

So instead of trying to get that time when the animation has finished
from the onComplete() handler, get it before and store it as a variable
to use in the onComplete() handler later.

This fixes an error message when switching workspaces using the swipe
gesture where MetaWorkspace complains about the 0-timestamp we pass it.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2233>
2022-03-13 00:06:03 +00:00
Ivan Molodetskikh
4bc195e797 windowManager: Change unfullscreen mode to NORMAL
The unfullscreen action doesn't make sense in other modes. In the
overview in particular it also prevents clicking on the top bar items on
a workspace with a fullscreen client.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2227>
2022-03-13 00:01:17 +00:00
Adam Williamson
81029c7d6c appDisplay: Fix a typo in the DEFAULT_FOLDERS definition
This causes a crash because when we look for 'categories' later
for this entry, it's undefined.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2238>
2022-03-12 09:32:56 +00:00
Adam Williamson
0db64d3562 appDisplay: Fix folder loop in _ensureDefaultFolders
In testing on Fedora, gnome-shell crashes here:

JS ERROR: TypeError: DEFAULT_FOLDERS[folder] is undefined

This needs to be a "for of" loop, not a "for in" loop, because
`folders` is an array of the hash's keys, not the hash itself.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2238>
2022-03-12 09:32:56 +00:00
Carlos Garnacho
c1d13fb471 keyboard: Prevent OSK key buttons from creating grabs
In a very un-StButton fashion, OSK keys are not interested in
altering the current focus state, as otherwise pressing those
will trigger a grab that will alter key focus, so the generated
key or IM state events will not be handled by the actor that
originally had the focus as long as the OSK key is pressed.

Despite being StButtons, OSK keys do already perform their own
press/release handling with internal state tracking, so it is
not a big stretch to simply consume the events, and update the
:active pseudo-class manually.

This makes OSK keys still look and behave as usual, but without
any grabbing shenanigans that might affect the focus state. This
makes all OSK keys work again.

Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4986
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2237>
2022-03-12 09:28:14 +00:00
Carlos Garnacho
c29e0cf6e6 grabHelper: Special case event funneling towards the OSK
In the case of bringing up the OSK while there is a grab (like, every
GNOME Shell entry), we used to special case event capturing so events
directed to the OSK would be let through.

When Clutter.Grab came around, events would be propagated only within
the actor hierarchy that holds the grab, which rendered this special
case just as useless as the OSK while a grab was hold. Since it wouldn't
be part of the grab hierarchy, clicking on the OSK would do nothing.

In order to let the OSK handle events, double down on the special case
and let it forward the event directly to the actor under the device,
instead of trying to let it through somehow. Since the actor under the
device are usually OSK buttons in this case, we don't need further
propagation to make it work, which makes the OSK functional again while
the shell holds a grab.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2237>
2022-03-12 09:28:14 +00:00
Sebastian Keller
6d3df381b3 workspace: Scale slots to current workspace size when layout is frozen
The transition from the overview freezes the workspace layout at the
start of the animation, which means that the calculated window slots
remain the same while the workspace itslef grows. This causes the
windows to appear slightly shrunk in comparison to the workspace and
shifted to the top left. This is especially noticeable during the
beginning of the animation when there is more weight on the slots than
the original window position and if there are not that many open
windows.

Unfreezing the layout for this transition is not possible, because it
would cause issues with newly opened windows abruptly changing the
layout when the animation happens after starting a new app.

This change instead tries to scale the frozen layout to the current
workspace size. While this is not entirely correct, because this scales
the spacing between the slots as well, it is still more accurate than
the completely unscaled slots.

Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4616
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1980>
2022-03-06 00:16:50 +00:00
Florian Müllner
fc4f9f61fa signalTracker: Explicitly register destroyable types
We currently assume that any '::destroy' signal on a GObject type
has the semantics of the ClutterActor/GtkWidget signal, and should
therefore result in all signals being disconnected.

But we already have a case where the assumption doesn't hold: ShellWM
uses '::destroy' for the closing animation of windows, and the ShellWM
object itself remains very valid after the emission.

So rather than making assumptions about '::destroy', check objects
against a list of destroyable types that are explicitly registered
as such.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2226>
2022-03-06 00:10:03 +00:00
Jonas Dreßler
ba23279f1f workspace: Don't freeze the layout when there's no layout yet
On some touchpads/laptops, the swipe gesture to open the overview can be
performed so fast, that it starts and ends in between two frames. Now
when this happens, and the gesture ended with too little movement to
confidently say the user intended to open the overview, we'll close the
overview again.

While closing the overview, we freeze the layout of the Workspace in
order to avoid changes to windows messing with the animation. This means
that in the case described above, we freeze the layout even before the
first frame of the opening animation happens. No frames being drawn also
means no allocations happening, and since we create this._layout in
vfunc_allocate(), this means that on the first allocation cycle of the
overview we'll see this._layoutFrozen = true, but will also not have
a this._layout nor this._windowSlots.

This creates an annoying visual glitch where for a split second all
the windows disappear (overview is visible but no WindowPreviews get
allocated).

To fix this, force creating a layout on the first allocation cycle, even
if the layout is currently frozen.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2203>
2022-03-06 00:00:46 +00:00
Jonas Dreßler
c5cba77a5c panel: Listen differently for button-press events
In the panel we listen for button presses on the panel in order to start
a drag op of the adjacent maximized window. With the recent changes
removing the source detail of events from Clutter, we now can no longer
access buttonEvent.source, but instead need to use
ClutterStage.get_event_actor().

Since that function expects us to pass a ClutterEvent and not a
ClutterButtonEvent, let's listen for the "button-press-event" signal
instead of connecting to vfunc_button_press_event(). This will give us a
ClutterEvent we can work with.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2225>
2022-03-05 23:51:59 +00:00
Florian Müllner
5d1d4b56c6 overviewControls: Do consider work area for HIDDEN state
While we don't want to position overview elements according to
the work area, it does apply in the session when the overview
is hidden. That is, we should take it into account for the HIDDEN
state, so that transitions from and to the overview are correct.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2223>
2022-03-05 22:29:57 +00:00
Florian Müllner
a30363140c overviewControls: Ignore work area again
The work area is really the space that is available to application
windows. Applying it to the overview is therefore questionable,
in particular given that

 - X11 clients that affect struts aren't shown
 - elements added by extensions have other means
   to affect the overview layout

Not applying the work area to the overview also makes ignoring
actors' visibility for struts acceptable again: Assuming that
strut actors are only hidden when the monitor is in fullscreen,
freezing the work area instead of updating it for windows that
are fully obscured by a fullscreen windows makes perfect sense.

This reverts commits 81a1e294f8 and 2b074882f4.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2223>
2022-03-05 22:29:57 +00:00
Florian Müllner
cd33f5d907 Revert "layout: Exclude hidden actors from struts"
The changes violated too many assumptions on the mutter
side. And even if those were addressed, changing the
work area when a window enters/leaves fullscreen isn't
great, because it will force an expensive relayout on
all other windows.

This reverts commit cd1102ff30.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2223>
2022-03-05 22:29:57 +00:00
Jonas Ådahl
b3c7a855c6 workspaceThumbnail: Use transient object for connecting some signals
We want to connect and disconnect a bunch of signals when showing/hiding
the worskpace thumbnails. To make this easy, use a transient object that
we tie to these signal handlers.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2220>
2022-03-05 10:08:48 +01:00
Florian Müllner
69717424f7 workspaceThumbnail: Remove unused properties
Those aren't used anymore since the switch to connectObject().

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2222>
2022-03-05 00:38:05 +01:00
Jonas Ådahl
f979ebcb1a remoteAccess: Hide indicator after a timeout
In order to make very short screen capture sessions more visible, let
the indicator remain visible, but a bit greyed out, for some seconds.
This makes it more obvious something was just capturing the screen.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2132>
2022-03-04 22:05:46 +00:00
Florian Müllner
26235bbe54 js: Use (dis)connectObject()
Start using the new methods to simplify signal cleanup. For now,
focus on replacing existing cleanups; in most cases this means
signals connected in the constructor and disconnected on destroy,
but also other cases with a similarly defined lifetime (say: from
show to hide).

This doesn't change signal connections that only exist for a short
time (say: once), handlers that are connected on-demand (say: the
first time a particular method is called), or connections that
aren't tracked (read: disconnected) at all.

We will eventually replace the latter with connectObject() as
well - especially from actor subclasses - but the changeset is
already big enough as-is :-)

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1953>
2022-03-04 14:14:37 +00:00
Florian Müllner
f45ccc9143 signalTracker: Provide monkey-patching for (dis)connectObject()
The module exports a `addObjectSignalMethods()` method that extends
the provided prototype with `connectObject()` and `disconnectObject()`
methods.

In its simplest form, `connectObject()` looks like the regular
`connect()` method, except for an additional parameter:

```js
    this._button.connectObject('clicked',
        () => this._onButtonClicked(), this);
```

The additional object can be used to disconnect all handlers on the
instance that were connected with that object, similar to
`g_signal_handlers_disconnect_by_data()` (which cannot be used
from introspection).

For objects that are subclasses of Clutter.Actor, that will happen
automatically when the actor is destroyed, similar to
`g_signal_connect_object()`.

Finally, `connectObject()` allows to conveniently connect multiple
signals at once, similar to `g_object_connect()`:

```js
    this._toggleButton.connect(
        'clicked', () => this._onClicked(),
        'notify::checked', () => this._onChecked(), this);
```

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1953>
2022-03-04 14:14:37 +00:00
Florian Müllner
919039e266 appDisplay: Create default folders on start
The default folders used to be created by gnome-software, as that was
where folder management used to be implemented. Since then, folder
management via drag and drop was implemented in the shell, and the
gnome-software code was removed.

The only bit that still involves gnome-software are the default folders
that are created on first run. Given that everything else has moved to
the shell, it makes sense to take over that part as well.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4948

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2110>
2022-03-04 13:02:13 +00:00
Carlos Garnacho
6d895bf8a9 searchController: Avoid event.set_source() API
It does not make sense that the target actor is both destinatary
and content of the events being sent, so this API call is going away.

Since the event can be sent entirely unmodified (more so, it will
become immutable/readonly in the future), avoid creating a copy
since it does not matter sending one or other struct.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2216>
2022-03-04 12:27:34 +00:00
Carlos Garnacho
dc0f286fe9 searchController: Query stage for target actor instead of event.get_source()
Events are going to stop containing the destinatary, so stop using this
API. Querying the stage is equivalent and ensured to be up-to-date.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2216>
2022-03-04 12:27:34 +00:00
Carlos Garnacho
17730fe5c4 popupMenu: Query stage for target actor instead of event.get_source()
Events are going to stop containing the destinatary, so stop using this
API. Querying the stage is equivalent and ensured to be up-to-date.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2216>
2022-03-04 12:27:34 +00:00
Carlos Garnacho
678e34d371 keyboard: Query stage for target actor instead of event.get_source()
Events are going to stop containing the destinatary, so stop using this
API. Querying the stage is equivalent and ensured to be up-to-date.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2216>
2022-03-04 12:27:34 +00:00
Carlos Garnacho
4a8b8e6dd5 grabHelper: Query stage for target actor instead of event.get_source()
Events are going to stop containing the destinatary, so stop using this
API. Querying the stage is equivalent and ensured to be up-to-date.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2216>
2022-03-04 12:27:34 +00:00
Florian Müllner
4735193456 dash: Fix drag placeholder position in RTL
The position corresponds to a child index, which means it must
be mirrored when starting to count from the right.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4574

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2219>
2022-03-03 20:19:19 +00:00
Florian Müllner
cff09617f3 lookingGlass: Take separate grab for object inspector
The object inspector is not a child of the main looking glass dialog,
so it no longer receives pointer/touch events with the new grab API.

Fix this by pushing/popping a separate grab.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5150

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2218>
2022-02-26 18:15:28 +01:00
Jonas Dreßler
eeabdd150c status/bluetooth: Clear list of connected signals on adapter changes
With the porting of gnome-bluetooth to the new GListModel API the
behavior regarding removing adapters changed: It now no longer
guarantees to emit "device-removed" signals for the paired devices when
the adapter gets removed.

This means we need to do that ourselves now, so clear the list of
connected signals when the default adapter changes.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2214>
2022-02-26 15:53:19 +00:00
Jonas Dreßler
94d9264d96 Revert "status/bluetooth: Bail out and hide UI when there's no adapter"
Turns out this broke showing the bluetooth menu entry for adapters which
rely on the had-devices-setup property being set while turned off. These
adapters are completely removed from the system by the firmware after
powering them off, so in that case there is no default adapter anymore,
although we still want to show the menu.

This reverts commit aaf47167b5.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2214>
2022-02-26 15:53:19 +00:00
Jonas Dreßler
bb1ec88dfa overview: Don't expect time argument from drag-end signal
We actually don't get a time from the xdndHandler when it emits
drag-end, so we fail right now when calling
workspaceManager.get_workspace_by_index(time).

Fix it by getting the time ourselves instead.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2211>
2022-02-23 17:58:36 +00:00
Florian Müllner
5d1b9a429e workspaceAnimation: Fix warning on restacking
Only workspace groups that are associated with a workspace have a
background. As a result, when restacking window previews we end up
passing `undefined` to clutter_actor_set_child_above_sibling()
instead of null, triggering a warning.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2209>
2022-02-23 12:29:36 +00:00
Florian Müllner
2b45a01517 cleanup: Use new indentation style for object literals
We have made good progress on object literals as well, although there
are still a lot that use the old style, given how ubiquitous object
literals are.

But the needed reindentation isn't overly intrusive, as changes are
limited to the object literals themselves (i.e. they don't affect
surrounding code).

And given that object literals account for quite a bit of the remaining
differences between regular and legacy rules, doing the transition now
is still worthwhile.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2200>
2022-02-23 12:23:52 +00:00
Florian Müllner
ac9fbe92e5 cleanup: Use new indentation style for arrays
We've made some progress on transitioning to the modern indentation
style, and for arrays the legacy style is now rare enough to make
a bulk transition feasible.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2200>
2022-02-23 12:23:52 +00:00
Florian Müllner
696965c9f7 cleanup: Stop using string concatenation
It's unfortunate that we cannot fully embrace template strings, but
we aren't limited to "legacy" formatting either; replace the last
remaining places where we still use string concatenation to reduce
the difference between regular and legacy style a bit.

Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2200>
2022-02-23 12:23:52 +00:00