If the GNOME shell crashes, we run a service that may disable
extensions. This is important so that users will not be locked out of
their own session in case an extension is causing crashes.
As this is a very agressive action, we tried to only do this in the
first two minutes of the session. Unfortunately, the logic was broken
and would result in an unclean session shutdown.
Fix this by using the newly introduced gnome-shell-disable-extensions
file. This is created by the extension subsystem for a period of time to
indicate the extensions may be the cause of a gnome-shell failure.
See
https://gitlab.gnome.org/GNOME/gnome-session/issues/43
for a log of the bug happening and the gnome-session part to fix this.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/858
Since the notification message close button had no border, or mouse
over effect, there was no way to determine whether the mouse cursor
were over the button.
Improve this by adding a message-close-button class for the close
button, and a styling for its hovered state, based on media control
button styling.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/855
Increases contrast between normal and hovered states in
message-media-control buttons. Previously there was very little
difference between the two states, making it hard to distinguish
whether the mouse cursor was over the button.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/855
The RenameFolderMenu uses the internal box as a menu item, while PopupMenu
expects to have PopupBaseMenuItem based children with a delegate set.
Instead of using a custom menu with a customized box acting as menu
item,just add a RenameFolderMenuItem that inherits from the parent,
adjusting the features as we need them. In fact, the rename folder menu item
doesn't need any label, padding or default styling so we can reuse
PopupMenuBaseItem after we use our styling properties and we set the
Ornament to HIDDEN.
To get the proper style in place, define rename-folder-popup and
rename-folder-popup-item to override the default popup-menu-item rule
padding instead of using margins.
Pass the menu item as menu's focusActor as this will key-focus it on pop-up,
by overriding the key_focus_in() vfunc we can then delegate the focus
handling to the entry's clutter-text.
Also override the map() vfunc in order to update the entry's content before
mapping the entry.
Finally, use the item's activate method in order to tell the parent menu
we're done with it and that the menu can be closed.
As consequence we can also remove the menu's popup() method, and just use
the default open().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/720
The indicator for the active workspace is currently two pixels
smaller because it doesn't account for the border used for
inactive workspaces.
Fix that to make sure all indicators have the same size.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1243
If there's a stubborn process in our cgroup, we shouldn't hang around
waiting for the default (30 seconds) before the session closes. We've
logged out, SIGTERMed and the thing is refusing to go away, let's not
make people hang around for ages.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/699
Add a new popover with a regular entry + button to rename
folders. The layout is similar to other GNOME applications.
The popup is implemented as a PopupMenu subclass, leaving
the grab management to PopupMenuManager.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/675
Using the bus name to notify service startup to systemd has some
disadvantages. The main one being that systemd will consider a
gnome-shell restart (Alt+F2 r) a service failure and restart the shell,
cleaning up all its children (i.e. user launched applications). In the
future the shell should launch applications in their own transient unit
so that a service restart does not affect applications.
Another potential issue is that we must never load
gnome-shell-wayland.service and gnome-shell-x11.service at the same
time, as systemd does not like two services providing the same bus
name.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1496https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/690
Clocks has exactly the same issue as Weather: Its integration currently
relies on accessing its settings directly, which isn't possible when
the app is sandboxed.
Fix this the same way we did for Weather, by adding our own setting
and syncing it with the app via a custom D-Bus interface.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1158
The existing units were never used as the corresponding support was
never merged into gnome-session.
This commits updates units to be usable with the newer gnome-session
unit definitions. Also added is appropriate failure/restart logic
including the ability to disable extensions. Note that extensions will
only be disabled if a failure happens in the first two minutes after
login.
https://gitlab.gnome.org/GNOME/gnome-session/merge_requests/13https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/507
As gnome-shell is a required component for GNOME sessions, gnome-session
will currently always try to autostart it. However as we are moving towards
using systemd's user instance for session startup, gnome-session should only
be responsible for launching the shell when either not running under systemd
or when we were built without systemd support.
gnome-session can detect the former but not the latter, so communicate this
via the newly added X-GNOME-HiddenUnderSystemd key in the .desktop file.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/507https://gitlab.gnome.org/GNOME/gnome-session/merge_requests/13
Our current Weather integration depends on poking around the app's
settings, which we cannot do when the app is sandboxed (as its
filesystem is "hidden away" in a container in that case).
So instead, use our own GSettings schema for the settings, and sync
it with GNOME Weather via a custom D-Bus interface.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1158
The startup/busy indication in the app menu was left out of commit
22e21ad7d1 because it doesn't use a hard-coded image, but as the
image in the CSS is actually the same used by the spinner class,
drop the "custom" styling and use the regular spinner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/636
Trying to disable an extension that is enabled by the session mode
currently has no effect, which is clearly confusing. We could update
the various extension UIs to reflect that via sensitivity, but being
unable to configure extensions based on which session the user picked
at login isn't obvious either.
So instead, add a 'disabled-extensions' gsettings key to list extensions
that should not be enabled which takes precedence over 'enabled-extensions'
and can be used to disable session mode extensions.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
The existing 'ExtensionStatusChanged' signal has a fixed set of parameters,
which means we cannot add additional state without an API break. Deprecate
it in favor of a new 'ExtensionStateChanged' signal which addresses this
issue by taking the full serialized extension as parameter.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Extensions are currently enabled or disabled by directly changing the
list in the 'enabled-extensions' GSettings key. As we will soon add
an overriding 'disabled-extensions' key as well, it makes sense to
offer explicit API for enabling/disabling to avoid duplicating the
logic.
For the corresponding D-Bus API, the methods were even mentioned in
the GSettings schema, albeit unimplemented until now.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
While mutter supports a variety of different grid layouts (n columns/rows,
growing vertically or horizontally from any of the four corners), we
hardcode a fixed vertical layout of a single column.
Now that mutter exposes the actual layout to us, add support for a more
traditional horizontal layout as well.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/575
Unlike the app grid, we show the search results while the dash is hidden
and with a small scrollbar instead of page indicator dots. This
means there's nothing the search results might horizontally overlap
with and the padding here is unneccessary.
The spacing between the search results and the screen edges is still
sufficient because of the paddings applied to searchResultsContent.
On very small screens (< 1000px), this allows the search results to
utilize a lot more of the horizontal screen space.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/110
The functionality the searchResultsBin container provides can easily be
moved into a subclass of St.BoxLayout, no need for an additional StBin.
The "searchResultsBin" css class isn't used in the stylesheets either.
Same with the scrollChild container.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/110
- generate the OSK key colors from variables in _colors.scss without changing the design
- add hover and active colors for all key, not only letter keys
- use $button_radius for the OSK keys, buttons and entries (no value change for the latter)
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/610
Adds the UI part for the pointer accessibility features.
The various timeouts running are notified using a pie-timer showing
under the pointer.
For dwell-click type selection, we use a drop-down menu. Users can
use the dwell-click to select the next type of dwell click to be
emitted.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/474
This extends the ShellMountPasswordDialog by widgets which allow
specifying parameters supported by TrueCrypt and VeraCrypt compatible
volumes (TCRYPT). This includes:
- Whether the volume to be unlocked is hidden.
- Whether the volume to be unlocked is a system partition.
Note: TrueCrypt and VeraCrypt only support encrypting Windows
systems [1], so the label for this option is "Windows System Volume".
- Whether to use a PIM [2].
- Whether to use keyfiles. Unfortunately, GMountOperation doesn't
support TCRYPT keyfiles, so if this checkbox is checked, we tell the
user that they should unlock the volume with Disks, which supports
unlocking TCRYPT volumes with keyfiles.
[1] https://www.veracrypt.fr/en/System%20Encryption.html
[2] https://www.veracrypt.fr/en/Header%20Key%20Derivation.htmlhttps://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/126
- simplify the close button to use blue, lighter blue and darker blue
solid disks for normal, hover and active states
- use a milky, transparent white border for the hover effect of the border
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/461
This API has been broken for quite some time now as the corresponding
mutter function meta_monitor_manager_get_monitor_for_output was removed.
If anyone tries to use it, we would just run into a backtrace.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/490
Selecting a screen area for a screenshot isn't the same as selecting
items in an icon view, so there's no strong rationale for picking
up the style from GTK. We stopped doing that for other elements like
tile previews long ago, so just use our own style here too.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/481
After the latest texture cache changes, loading the icon at its preferred
size and scaling it via the actor size no longer works. Instead, use the
icon-size property which is applied when loading the icon.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/452
