clutter_init() fails under normal circumstances like
being unable to open a display connection, so it shouldn't
be handled with g_error() producing a core dump.
Clutter consistently produces an error message when
clutter_init() fails, so we don't need to print out any
error message.
https://bugzilla.gnome.org/show_bug.cgi?id=643910
The number instructions in a shader is limited to 64 on r300 hardware,
the fade shader in StScrollViewFade was ending up using 97 instructions
which is way over the limit.
So refactor the shader to use less instructions by precomputing as many
values as possible outside of the conditionals. The resulting shader
ends up using 34 instructions which is well within the hardware limits.
https://bugzilla.gnome.org/show_bug.cgi?id=644589
GThemedIcon expects the first name to be the most specific, and
will thus prefer it to later ones. We thus need to order the names
from the longer to the shorter.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
* Run gnome-shell-perf-helper during performance tests
* Use MUTTER_WM_CLASS_FILTER to omit all other windows
* Add new Scripting methods: createTestWindow,
waitTestWindows, destroyTestWindows
* Create a single 640x480 test window for testing overview
animation performance.
https://bugzilla.gnome.org/show_bug.cgi?id=644265
We need to connect to the NameOwnerChanged signal before we execute the
DConf binary. Refactor things so that we connect to the signal when
we first get the bus object. Split the code for waiting for a D-Bus
name into a wait_for_dbus_name() function for latter reuse.
https://bugzilla.gnome.org/show_bug.cgi?id=644265
When navigating from a non-immediate descendant of a container, we
were attempting to use clutter_actor_get_transformed_position() to get
the exact position of that actor relative to the container, but this
did not really make sense, since we would be using the position of
the intermediate container when navigating back.
https://bugzilla.gnome.org/show_bug.cgi?id=644134
g_themed_icon_new_with_default_fallbacks() does not do what we want
with symbolic icons; if the user's icon theme is not "gnome", then it
will end up preferring a non-symbolic icon from the higher-level theme
over a symbolic icon from gnome-icon-theme-symbolic.
If the shell requests a symbolic icon, and there is only a
non-symbolic icon available, that should be considered a programmer
error, just like requesting a non-existent icon name. So change the
code to only look up "-symbolic" names when drawing an
ST_ICON_SYMBOLIC icon.
https://bugzilla.gnome.org/show_bug.cgi?id=644142
* calendar-server subdirectory of build directory needs to
be created.
* Generate shell-enum-types.c/.h in build directory rather than
in the possibly-read-only source directory.
Build gnome-shell as a binary linked against libmutter-wm, instead of
a module to be loaded by libmutter-wm. Move the majority of
initialization-type stuff from gnome_shell_plugin_start() into main().
We still build libgnome-shell as a shared library, so that the linker
doesn't discard all the methods that are never called from C.
https://bugzilla.gnome.org/show_bug.cgi?id=641724
Add Ctrl-Alt-Tab support to ViewTab, and fix the Applications pane to
scroll to track the keyboard focus.
The Windows pane can be switched to, but navigation within the pane is
not yet implemented.
https://bugzilla.gnome.org/show_bug.cgi?id=618887
PopupMenuManager was pretending that it knew nothing about the menu's
sourceActors, while also trying to handle keynav between them. This
was a big mess, and resulted in bugs in navigation between panel menus
and the Activities button, and it totally gets in the way when trying
to add keynav to the dash (whose menu sources are arranged vertically
rather than horizontally).
Fix this up by moving the panel-specific parts to PanelMenuButton
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=641253
At times, RTL locales require different CSS, so always create theme
nodes with :ltr/:rtl pseudo classes depending on the widget's text
direction, to provide an easy way to handle those cases without
requiring a separate stylesheet.
https://bugzilla.gnome.org/show_bug.cgi?id=643835
Instead of defining rules manually, use the included make support,
which means Makefiles are less prone to API changes, support
verbosity correctly (instead of inconsistently hardcoding --quiet),
are cleaner to read, and emit GISCAN/GICOMP instead of GEN (which
is nicer).
https://bugzilla.gnome.org/show_bug.cgi?id=643371
The current gnome-shell.in script has a huge amount of
unnecessary complexity for the installed, normal case. Fix
this by adding a configure option (defaulting to false) that
installs a simple, obvious wrapper script around mutter.
We do change the gnome-shell build setup to pass this option
by default for jhbuild.
https://bugzilla.gnome.org/show_bug.cgi?id=642084
Unfortunately the evolution-data-server client-side libraries seem to
block the calling thread. This is a major problem as we must never
ever block the main thread (doing so causes animations to flicker
etc.). In the worst case, this problem causes login to hang (without
falling back to fall-back mode) and in the best case it slows down
login until a network connection is acquired.
Additionally, in order to sanely use these evolution-data-server
libraries, GConf has to be involved and GConf is not thread-safe. So
it's not really feasible just moving the code to a separate
thread. Therefore, move all calendar IO out of process and use a
simple (and private) D-Bus interface for the shell to communicate with
the out-of-process helper.
For simplification, remove existing in-process code since internal
interfaces have been slightly revised. This means that the shell is no
longer using any native code for drawing the calendar dropdown.
https://bugzilla.gnome.org/show_bug.cgi?id=641396
Signed-off-by: David Zeuthen <davidz@redhat.com>
See commit f2158218bef0c51 in mutter. Basically, we need
to grab org.freedesktop.Notifications before anything else
in the session gets started.
Note: I intentionally removed the Util.killall bits. I believe that
for notification-daemon at least, if we specify
DBUS_NAME_FLAG_REPLACE_EXISTING, we'll take over the name. Not sure
about notify-osd; if that's still a problem, then what we need to do
is add killing (and possibly respawning) of notify-osd to
"gnome-shell --replace", and not have it embedded randomly in a JS file.
https://bugzilla.gnome.org/show_bug.cgi?id=642666
gs-applications was introduced because we initially wanted a limited set
of categories, but this has now changed and we're back to categories
similar to the ones in the applications.menu from gnome-menus.
We can fix gnome-menus to have better categories, if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=641148
The vertical scrollbar is located on the left in RTL locales, so
pass an additional parameter to the shader which indicates the
locale's text direction.
https://bugzilla.gnome.org/show_bug.cgi?id=643156
In RTL locales, the vertical scrollbar should be located on the
left, so take the widget's text direction into account when
allocating the view's elements.
https://bugzilla.gnome.org/show_bug.cgi?id=643156
This allows PolicyKit applications to disambiguate between when the
authentication dialog is dismissed versus when authentication fails
(e.g. the wrong password has been entered).
See https://bugs.freedesktop.org/show_bug.cgi?id=30653 for more
information.
Signed-off-by: David Zeuthen <davidz@redhat.com>
A PolicyKit Authentication Agent is a construct used to authenticate
one or more identities. See the PolicyKit documentation for more
details on authentication agents and how PolicyKit works:
http://hal.freedesktop.org/docs/polkit/
Since gjs does not support subclassing a GObject class from Javascript
code, we bring in a native class to bridge the VFuncs to GObject
signals. Additionally, this native class also queues up authentication
requests so the user of the native class only has to deal with a
single outstanding request at any one time.
The file js/ui/polkitAuthenticationAgent.js introduces a singleton
that listens for authentication requests via the native class. This
singleton uses the PolkitAgent machinery to do the actual heavy-weight
lifting required for authentication (essentially a PAM conversation).
We currently don't allow the user to pick the identity to be
authenticated.
https://bugzilla.gnome.org/show_bug.cgi?id=642886
Signed-off-by: David Zeuthen <davidz@redhat.com>
When retrieving a ShellApp from the GHashTable of child processes,
we need to take an extra reference, that the GHashTable of windows
to apps will own.
Also add some documentation to avoid repeating this bug in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=642699
Using clutter_get_current_event_time can result into too old timestamps
when there is no current Clutter or Mutter event, since
clutter_get_current_event_time() returns the timestamp of the last event
delivered to Clutter. This can result in, for example, grabs failing. Use
the event time of the current event (if any) and CurrentTime otherwise.
https://bugzilla.gnome.org/show_bug.cgi?id=642188
Currently an entry's primary/secondary icon can only be set by
filename. In order to allow using themed icons, add API to set
a generic ClutterActor as icon.
https://bugzilla.gnome.org/show_bug.cgi?id=642333
For historical reasons, StEntry always did hover tracking when you had
visible hint_text, even if track_hover was FALSE. Remove that special
case, and make entries track hover just like all other widgets do.
If we actually needed to distinguish hovered-with-hint-text from
hovered-without-hint-text (which, at the moment, we don't), we could
do that by setting separate CSS for :hover and :hover:indeterminate.
https://bugzilla.gnome.org/show_bug.cgi?id=642483
