When UPower has not yet collected enough data to calculate a time
to discharge, it will report 0 minutes. Show "Estimating..." in
that case instead.
https://bugzilla.gnome.org/show_bug.cgi?id=642753
Currently we remove a workspace when last window on that workspace closes,
which turned out to be too agressive as some apps open either a splashscreen
or a "I have crashed last time" dialog at startup.
Try to detect such apps and give them a chance to open their "real window(s)"
on the workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=642188
_ungrabActor disconnects the event signal handler but does not
check whether it is connected before doing so which can result into
an exception like:
JS ERROR: !!! Exception was: Error: disconnect() takes one arg, the signal handler id
JS ERROR: !!! lineNumber = '0'
JS ERROR: !!! fileName = 'gjs_throw'
JS ERROR: !!! stack = 'Error("disconnect() takes one arg, the signal handler id")@:0
Unfortunately the evolution-data-server client-side libraries seem to
block the calling thread. This is a major problem as we must never
ever block the main thread (doing so causes animations to flicker
etc.). In the worst case, this problem causes login to hang (without
falling back to fall-back mode) and in the best case it slows down
login until a network connection is acquired.
Additionally, in order to sanely use these evolution-data-server
libraries, GConf has to be involved and GConf is not thread-safe. So
it's not really feasible just moving the code to a separate
thread. Therefore, move all calendar IO out of process and use a
simple (and private) D-Bus interface for the shell to communicate with
the out-of-process helper.
For simplification, remove existing in-process code since internal
interfaces have been slightly revised. This means that the shell is no
longer using any native code for drawing the calendar dropdown.
https://bugzilla.gnome.org/show_bug.cgi?id=641396
Signed-off-by: David Zeuthen <davidz@redhat.com>
See commit f2158218bef0c51 in mutter. Basically, we need
to grab org.freedesktop.Notifications before anything else
in the session gets started.
Note: I intentionally removed the Util.killall bits. I believe that
for notification-daemon at least, if we specify
DBUS_NAME_FLAG_REPLACE_EXISTING, we'll take over the name. Not sure
about notify-osd; if that's still a problem, then what we need to do
is add killing (and possibly respawning) of notify-osd to
"gnome-shell --replace", and not have it embedded randomly in a JS file.
https://bugzilla.gnome.org/show_bug.cgi?id=642666
The DBus JS binding will complain if the signature of a method
or of a signal is undefined, so we need to define it even if it
is an empty string, and we need to use the correct property name
for signals.
https://bugzilla.gnome.org/show_bug.cgi?id=643374
For applications with no proper desktop file, the window icon is
used as application icon in the tab switcher, but it won't have
the correct icon size. The current approach is to add additional
padding to these icons - the size turns out inconsistent with
other icons, but the icon appears sharp. For the dash it has been
decided that unsharp icons are less evil than differing icon sizes,
so icons are scaled up to the "right" size - for consistency, do the
same in the alt-tab switcher.
https://bugzilla.gnome.org/show_bug.cgi?id=643300
Mainly due to StTextureCache's way of handling fallback icons, an
implementation of BaseIcon.createIcon() may return an icon smaller
than the requested size. Given that BaseIcon is not used for isolated
elements, but rather for groups of related items (App view, Dash,
Search Results, ...), having some elements end up with the wrong
size is more annoying than having some elements end up ugly due to
scaling, so explicitly enforce the requested icon size.
https://bugzilla.gnome.org/show_bug.cgi?id=642043
As gnome-shell now switched to use the menu file from gnome-menus,
we no longer have direct control over category names. If such a name
contains unescaped markup, the shell will crash when trying to create
the filter label, so make sure to escape markup in category names.
Fix a typo in panel.js, and ensure that all variables used in
functions are scoped to the block (using let), to avoid polluting
the global namespace.
https://bugzilla.gnome.org/show_bug.cgi?id=643210
Rather than connecting to stage::capture-event and then trying to
guess whether or not a given key-press should be handled by us or not,
handle the end-search-on-Escape case from entry::key-press-event
(since it only makes sense when the entry is focused anyway) and the
start-search-on-printable-key case from stage::key-press-event (which
will only get the events that no other actor wanted for itself).
Similarly, do exit-overview-on-Escape and switch-panes cases from
stage::key-press-event, rather than
viewSelector.actor::key-press-event, so that they will work correctly
even if the keyboard focus is somewhere else. (Also fix a longstanding
bug in the pane-switching code, which was supposed to be disabled when
a search was active, but was checking a non-existent variable.)
https://bugzilla.gnome.org/show_bug.cgi?id=642502
The search entry was taking a sort of grab when it was in the
focused-but-empty state, and would eat up most events for other actors
(except, confusingly, for panel actors). The only bit of "modality" we
really need here is that the entry is supposed to go back to the
unfocused state if you click somewhere outside it when it was in the
focused-but-empty state. So do that.
https://bugzilla.gnome.org/show_bug.cgi?id=642502
The division of labor between the two was quite muddled. Rather than
try to invent a clean distinction of what belongs where, just merge
them together.
https://bugzilla.gnome.org/show_bug.cgi?id=642502
When the user cancels the drag while hovering over a window the timeout
handler will throw an exception because the drag actor will be destroyed
at this point.
Fix that by removing the timeout in _onDragEnd.
The xdnd timestamp gets updated on every xdnd-position event,
so while waiting for the window timeout to fire we need to make sure we
update the timestamp when getting on motion to activate the window
with the correct timestamp.
Commit 259c84ed9a refactored out HotCorner into its own class
and added this line and a variable, but it was left behind
when the variable disappeared in commit 7cf311dac0.
See https://bugs.freedesktop.org/show_bug.cgi?id=27788#c1 for details
about the problem this patch is solving
In particular, we should never bring up the dialog if there is no
password on the account. While this sounds like a weird corner case,
it's not.. the Live CD, for example, does not have a root password.
This also avoids the initial dialog resize.. before the patch the
authentication dialog appears and a split-second later an StEntry
widget is added.
Also print out more diagnostic information if showing the modal dialog
fails. Also add a comment about how to easily make this happen.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Currently the panel is positioned from main.js, move that code into
a method in panel.js instead and call it from main.js, which is
consistent with what we do for the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=643064
This is required since we can have chrome on multiple monitors (due to
per-monitor hot-corners).
Windows are primary associated with the monitor that their center is on.
https://bugzilla.gnome.org/show_bug.cgi?id=642881
This is needed so that we can have several instances, one per
monitor.
This also makes the hot corner environments a container which
contains the corner.
https://bugzilla.gnome.org/show_bug.cgi?id=642881
In the mockups the bottom border of active panel buttons is drawn
on top of the panel's border. To get this effect, move the panel
border into the background, so that it is not subtracted from the
vertical space given to the buttons. Adjust the drawing of the rounded
corners to reflect that change.
https://bugzilla.gnome.org/show_bug.cgi?id=643001
This allows PolicyKit applications to disambiguate between when the
authentication dialog is dismissed versus when authentication fails
(e.g. the wrong password has been entered).
See https://bugs.freedesktop.org/show_bug.cgi?id=30653 for more
information.
Signed-off-by: David Zeuthen <davidz@redhat.com>
We never get enter events anyway due to the menu code, and if
the user clicks on a non-menu the menu is removed and ungrabbed
before the target actor gets the event anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=642881
Currently the menu has a hardcoded width which result into the hover
effect of the "Open Calendar" item being "cut off" in the middle rather
then reaching to the edge.
To be consistent with other menu items, make it expand to fill the available
space.
This is special menu item that can alternate
between two choices when you hit the alt key.
It will be useful for getting a hybrid
suspend/power off menu item.
https://bugzilla.gnome.org/show_bug.cgi?id=636680
PopupMenuManager relies on menus being added in the order of the
menu buttons they are attached to, so defer adding the user status
menu until the status icon menus have been added to make the manager
happy.
This patch modifies MessageTray behaviour so that normal (not urgent)
notifications are not shown when the user is Busy (they're sent
immediately to the Summary area). When status is then changed,
notifications still pending are shown again.
Additionally, when status is modified from Idle to anything other than
Busy, the message tray is forced open for 4 seconds, so that summary
icons are visible.
https://bugzilla.gnome.org/show_bug.cgi?id=617225
A PolicyKit Authentication Agent is a construct used to authenticate
one or more identities. See the PolicyKit documentation for more
details on authentication agents and how PolicyKit works:
http://hal.freedesktop.org/docs/polkit/
Since gjs does not support subclassing a GObject class from Javascript
code, we bring in a native class to bridge the VFuncs to GObject
signals. Additionally, this native class also queues up authentication
requests so the user of the native class only has to deal with a
single outstanding request at any one time.
The file js/ui/polkitAuthenticationAgent.js introduces a singleton
that listens for authentication requests via the native class. This
singleton uses the PolkitAgent machinery to do the actual heavy-weight
lifting required for authentication (essentially a PAM conversation).
We currently don't allow the user to pick the identity to be
authenticated.
https://bugzilla.gnome.org/show_bug.cgi?id=642886
Signed-off-by: David Zeuthen <davidz@redhat.com>
Complex popup menus require the ability to manager sequences of items
as "sections", to which you can add and and remove items, as well
as hide and show.
PopupMenuSection does exactly that, leveraging the existing machinery
for submenus, but without being exposed as a submenu to the user.
Also, make getMenuItems() private, since it is used for different things
now and may change semantics in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
Make all subclasses of PopupMenuBase accept a params argument, which
can be used to make the item non reactive, not responsive to hover
and, as a new feature, with a different style class.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
If the Shell is started with HighContrast enabled, it will never
see another value for the GSettings keys. In that case, we just
reset to the default.
https://bugzilla.gnome.org/show_bug.cgi?id=642641
We need the view selector to extend all the way to the right edge of the
monitor, so size and position the view selector in a way that the sum of
its X position and its width add up to the primary monitor width.
https://bugzilla.gnome.org/show_bug.cgi?id=642834
So far transitions do not work for the custom drawn corners, so to
avoid a visible glitch when transitioning a button in the panel corner
while updating the style of the apparently attached corner instantly,
remove transition of those panel buttons until we make it work for the
custom drawn parts as well.
https://bugzilla.gnome.org/show_bug.cgi?id=642697
Current mockups show the panel curving downwards at the edges to
frame the work area and look awesome. Implement those as separate
actors to not affect the struts set by the panel, and synchronize
their state with the corresponding panel buttons so they blend in
with the panel. It might be worth considering whether the corners
should be hidden with maximized windows on the current workspace,
though this might affect the illusion of them being part of the
panel. As the corners don't affect the input region, the small
overlap with windows might not be too bad after all.
https://bugzilla.gnome.org/show_bug.cgi?id=642697
The groups at the panel sides use different left/right padding, so
a slightly different CSS is required for RTL locales. Add :rtl
pseudo classes as necessary and adjust the CSS.
https://bugzilla.gnome.org/show_bug.cgi?id=642697
We now use a border image on active panel buttons to underline the
button's content. As the property does not affect the content's
allocation, the app icon ends up being drawn on top of the border
image. To prevent this, use a custom property to clip the bottom of
the app icon when the button is active.
https://bugzilla.gnome.org/show_bug.cgi?id=642697
While related to the status area, the user status button is clearly
not a status icon, and it does not make too much sense in
startStatusArea(), which is about filling the status area with
icons. Also, the status icon container is added to the panel in
the constructor, in fact, the user status button is the only "toplevel"
panel element which is initialized elsewhere. Not a crucial change,
but makes for a nice read anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=642697
When we are dragging a window over its current workspace or workspace
thumbnail, we show show "no drop possible" feedback instead
of "move here" feedback.
https://bugzilla.gnome.org/show_bug.cgi?id=642329
We don't necessarily get a syncStacking call when an actor is added
at the top of the workspace, so make sure to set the stackAbove value
for it correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=642329
'Search your computer' is problematic for various reasons:
- it specifies the kind of device
- it focuses on local search (while we also do web search)
- it does not advertise the instant search functionality
Change the hint text to 'Type to search' as proposed by Allan Day.
https://bugzilla.gnome.org/show_bug.cgi?id=642287
This starts saving lookingGlass history in gsettings, and also adds
the ability to clear the text field by pressing 'down' on the last
entry, like the run dialog and readline allow.
https://bugzilla.gnome.org/show_bug.cgi?id=642237
runDialog and lookingGlass both implement a home-made history
manager, each working slightly differently than each other in
behavior and implementation.
Extract the behavior and implementation from runDialog, which
reads and saves to GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=642237
We try to position the boxpointer centered above the calendar,
which swaps position with the events list when using a RTL locale,
so make the menu alignment dependent on the text direction.
https://bugzilla.gnome.org/show_bug.cgi?id=642721
As the dash uses different widths and radii for left and right
borders, we need to use different CSS when it is positioned at
the right of the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=642721
- When tweening a workspace to collapse it, round the multiplied
height so that we don't change other workspace sizes via rounding
differences.
- Use separate horizontal and vertical scales, so that every thumbnail
has the same horizontal scale.
https://bugzilla.gnome.org/show_bug.cgi?id=641881
Allow defining a "porthole" that is the visible area of a workspace
thumbnail, and use this to clip the portion under the panel off the
workspace thumbnails. (This is wrong for fullscreen windows, but not
very wrong, and hopefullly the few missing pixels will be
unnoticeable.)
https://bugzilla.gnome.org/show_bug.cgi?id=641880
Because the overall parent allocation width immediately when the workspace
count changes, we were sometimes drawing the indicator in the wrong place
in the indicator animation that proceeded the remove-workspace animation.
Fix this by tweening only the Y position of the indicator and computing
the X position and size in our allocate() method. This also is considerably
simpler than switching the indicator between fixed position and geometry
managed.
https://bugzilla.gnome.org/show_bug.cgi?id=641881
Rather than killing the workspace indicator indicator when we remove
workspaces because the source and target locations might have changed,
do it as a separate first step. This provides a better explanation
than doing it simultaneously with the addition/removal or not at all
and also keeps our computations simple.
https://bugzilla.gnome.org/show_bug.cgi?id=641881
When we animating the scale for the thumbnails, the border and
background should wrap around the current size of the thumbails.
The technique that we are using to animate the scale breaks that
since we don't animate the overall size of the thumbnails box -
we just animate our child actors within the allocation.
To fix this, switch from drawing the background by packing in another
container to drawing the background with a separate actor that
is under the other actors and allocated by our custom logic.
https://bugzilla.gnome.org/show_bug.cgi?id=641881
To explain to the user what is happening, instead of abruptly changing
updating the workspace thumbnail list, slide thubmnails in and out
as they are added and removed.
To implement this, we track a state for each thumbnail and when things
change go through a process of first sliding removed thumbnails out,
then ollapsing the left-over spaces and rescaling the thumbnails, then
finally sliding newly added thumbnails in.
https://bugzilla.gnome.org/show_bug.cgi?id=641881
For historical reasons, StEntry always did hover tracking when you had
visible hint_text, even if track_hover was FALSE. Remove that special
case, and make entries track hover just like all other widgets do.
If we actually needed to distinguish hovered-with-hint-text from
hovered-without-hint-text (which, at the moment, we don't), we could
do that by setting separate CSS for :hover and :hover:indeterminate.
https://bugzilla.gnome.org/show_bug.cgi?id=642483
The setting in org.gnome.desktop.default-applications.at
has been removed, use the corresponding setting in
org.gnome.desktop.a11y.applications instead.
The setting in org.gnome.desktop.default-applications.at
has been removed, use the corresponding setting in
org.gnome.desktop.a11y.applications instead.
If you left the overview immediately after entering it (either
intentionally or due to a bug), the app menu would mistakenly end up
hidden due to flaky interaction between its show() and hide() methods.
Based on a patch by Dan Winship <danw@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=641117
When we have more thumbnails than can fit in the vertical space, scale
them down. This is implemented by using a generic container so we can
compute positions and sizes on the fly and do the appropriate
width-for-height behavior.
The usage of clutter constraints to position the indicator is droppped
since it less complicated to just position the indicator in the right
place ourselves.
https://bugzilla.gnome.org/show_bug.cgi?id=641879
The scale we zoom to in the "zoomed out" mode depends on the width of the
controls area. Once we rescale the workspaces dynamically, we'll need to
update the zoom scale as we add and remove workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=641879
We will change the workspace thumbnail size as we get more thumbnails; it doesn't
really make sense to always show 1/5 of the thumbnails how big or small they are,
so instead show a CSS-configurable length.
https://bugzilla.gnome.org/show_bug.cgi?id=641879
Fix a bug in the computation of the zoomed-out scale and use a StBin
instead of an unnecessary StBoxLayout. Using the StBin will allow
correct width-for-height behavior for the controls.
https://bugzilla.gnome.org/show_bug.cgi?id=641879
Add WorkspaceThumbnail.ThumbnailsBox to handle managing the array
of workspace thumbnails; the logic will get more complex as we add
scaling and animation.
https://bugzilla.gnome.org/show_bug.cgi?id=641879
The settings in org.gnome.desktop.default-applications.at
have been removed, use the corresponding settings in
org.gnome.desktop.a11y.applications instead.
gsettings-desktop-schemas had two conflicting settings for showing
the magnifier: 'show-magnifier' in org.gnome.desktop.a11y.magnifier
and 'screen-magnifier-enabled' in org.gnome.desktop.a11y.applications.
The former has been removed in favor of the latter, so adjust to this
change.
Add the machinery to cancel the notification when a new playing a
new one (wrapping ca_context_cancel), then use it when scrolling
the status icon.
Not doing it for the slider because it causes noise, either with the
keyboard, with mouse drag or with mouse wheel.
https://bugzilla.gnome.org/show_bug.cgi?id=633667
The original icon doesn't exist, which results in empathy summary
items in the tray showing no icons (invisible) at all. With this fix
users can now at least see where the icons are (they are no longer
invisible).
https://bugzilla.gnome.org/show_bug.cgi?id=639468
As Main.overview is now usable from the view selector's constructor,
move the setup of signal connections there and remove the show/hide
methods which were used as workaround.
https://bugzilla.gnome.org/show_bug.cgi?id=642196
To enable find-as-you-type when entering the overview and disabling
it when leaving, we used a chain of functions calls from ViewSelector
over SearchTab to SearchEntry. As find-as-you-type should be enabled
while the overview is shown, the activation/deactivation can be
handled entirely by the SearchEntry itself by tying it to the entry's
visibility.
https://bugzilla.gnome.org/show_bug.cgi?id=642196
As Main.overview is now usable from the dash's constructor, move
the setup of signal connections there and remove the show/hide
methods which were used as workaround.
https://bugzilla.gnome.org/show_bug.cgi?id=642196
The Overview does not only hold the different elements visible in
the overview, but is also a central point to manage drag signals.
As objects which are constructed in the overview constructor cannot
access Main.overview (as its constructor has not finished yet), we
use misnamed show/hide methods to work around this limitation, which
are called when entering/leaving the overview.
A better way to handle this problem is to remove the limitation
altogether by splitting the overview constructor between internals,
which remain in the constructor, and more complex objects which
need to access Main.overview, and whose initialization is moved
to a public init() function which is called by main.js after the
overview has been constructed.
https://bugzilla.gnome.org/show_bug.cgi?id=642196
This patch fixes the summary notification reappearing if you click on the
summary item to hide it and hover away. It also ensures that when you click
on any summary item which doesn't correspond to the summary notification
being shown, a new summary notification will replace it right away.
What used to happen is that we'd unset the clicked item in _unlock() that
was called when the focus was ungrabbed because the user clicked outside
of the summary notification, but then would have this._clickedSummaryItem
be null in _onSummaryItemClicked() , and set it to the clicked item all
over again. This patch ensures that we unset the clicked item only when
it is necessary.
We also needed to add the code to call _updateState() again to show a new
summary notification when a previous one was hidden, but
this._clickedSummaryItem was set.
https://bugzilla.gnome.org/show_bug.cgi?id=642005
Follow-up to commit 09717aae58 so
title changes also support markup instead of the ugly "<i></i>"
status.
Additionally, make sure to escape the contact's title as that
may accidentally contain unsafe markup or characters.
https://bugzilla.gnome.org/show_bug.cgi?id=642209
We were adding pango markup to the message in ContactManager.setPresence,
but weren't correctly marking the message as containing pango markup,
allowing for uglyness such as "User is <i>away</i>." being shown to the
user.
https://bugzilla.gnome.org/show_bug.cgi?id=642209
As the dash is one of the primary drop targets for dragging application
launchers, it's reasonable to use the dash icon size for app icons'
drag actors, especially with the larger size now used in the application
view.
https://bugzilla.gnome.org/show_bug.cgi?id=639428
As elements in the dash are scaled to accommodate a growing number
of items, the icon size used may end up rather small. In that case,
dragging items to the dash which are significantly larger than items
in the dash is getting clumsy, so it makes sense for some components
to synchronize the size of drag actors with the currently used icon
size in the dash. To enable other components to do this, make the icon
size a public property.
https://bugzilla.gnome.org/show_bug.cgi?id=639428
- Center the icon texture in the area allocated for it, and always give
the nominal size - avoid off-by-one scaling if the parent allocated
a little less or more size than we wanted.
- Use Math.floor() when centering horizontally to avoid allocation
at a half pixel.
https://bugzilla.gnome.org/show_bug.cgi?id=642124
Make calling workspace.setReservedSlot(null) do nothing if the slot was
already null; this improves efficiency and more importantly chills out some
weird reentrancy at the end of drag and drop that removes a window from
a workspace.
We were properly accounting for the fact that an ancestor of the
parent could be scaled rather than the parent itself when computing
the snap-back scale, but directly using parent.scale_x for the
snap-back location.
https://bugzilla.gnome.org/show_bug.cgi?id=642117
A right click was propagating through to the parent actor meaning
that a right click would activate the workspace twice and leave the
overview instead of just switching to it.
https://bugzilla.gnome.org/show_bug.cgi?id=641973
If you want to select a workspace and go there, having to go back to
the main part of the window selector and click on a window is annoying,
so make a second click on the active workspace go to the main view.
https://bugzilla.gnome.org/show_bug.cgi?id=641973
Some recent painting-efficiency fix broke the inspector, which
accidentally depended on things getting repainted too often, and so
was failing to highlight things properly now. A simple queue_redraw()
fixes this, but while I was there, I decided to port the drawing hook
to JS as well, since all the necessary parts of cogl work fine from
JS.
https://bugzilla.gnome.org/show_bug.cgi?id=642058
That way it can be used when other components of the message tray need to
grab focus, such as the summary bubble with multiple notifications or the
summary item's right click menu.
https://bugzilla.gnome.org/show_bug.cgi?id=641810
The view might get mapped before the filters have been added, so
trying to reset to the "All" filter will throw an exception. Fix
by only do the reset if the filters have been initialized.
When switching to the app view, it is unlikely that a user is
going to select an application from the same filter list as the
last time the view was used, so reset the view to the "All" filter
on switch.
https://bugzilla.gnome.org/show_bug.cgi?id=641987
When switching to the application view, the view is still scrolled
to the position it had when left previously. Given that it is rather
unlikely that the application the user wants to select is located close
to that position, it appears beneficial to start at a predictable
position, so make sure that the scroll position is always reset to
the top.
https://bugzilla.gnome.org/show_bug.cgi?id=641987
The default state of the switcher is constructed but not visible,
so create it that way.
This fixes a bug where if we created the switcher but didn't show it
or use it we'd end up with an empty, odd looking switcher.
We already skip animations for item additions/removals while the
overview is hidden or when initially filling the dash (to avoid
an odd zoom effect when showing), apply the same logic to animations
of icon size changes.
If a window is closed, the list of running applications may change
while the overview is hidden. Animating dash changes is pointless
in this case, so update the dash without animations in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=636156
The dash is created empty and the initial set of items is added
before it's shown for the first time. As the additions of items
is now animated, this results in a slightly odd effect when all
items zoom in at once. So special-case the first time _redisplay()
is called and skip animations in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=636156
In general, all changes in the shell interface should be backed
by animations to give the interface a more natural feel and provide
feedback of what's happening. Currently the dash violates that
principle, as items simply appear/disappear or change size abruptly,
so add animations for application list and icon size changes.
https://bugzilla.gnome.org/show_bug.cgi?id=636156
Clutter containers only take their children's size into account, but
not their scale. As we want the dash to change its size smoothly
when zooming items in/out, we wrap each item in a custom container
which does consider the child's scale.
https://bugzilla.gnome.org/show_bug.cgi?id=636156
