This DBus API is intended to be used by gnome-control-center's
displays panel to show monitor labels.
Each output (i.e. hardware monitor) identified by its
org.gnome.Mutter.DisplayConfig API ID has at most one label. On
mirrored setups, all the labels for outputs corresponding to the same
logical monitor (i.e. showing the same contents in the same mode) are
shown together.
At most, only one DBus client at a time is allowed to show labels.
https://bugzilla.gnome.org/show_bug.cgi?id=743744
Because there's nothing (in single-monitor setups) that could
take the drop in this case.
* js/ui/appDisplay.js:
AllView._loadApps(), FrequentView._loadApps(): Pass
an isDraggable parameter when creating the AppIcons,
depending on whether the favorite-apps key is locked.
AppIcon._init(): Check for isDraggable in the params and
do not create _draggable if it was specified, to prevent a
drag from starting.
AppIcon.popupMenu(): Check _draggable before trying to call
fakeRelease on it.
* js/ui/dash.js: Dash._createAppItem(): Check AppIcon._draggable
before trying to connect to its signals.
https://bugzilla.gnome.org/show_bug.cgi?id=741325
In a lockdown scenario, where the favorite-apps GSettings key is not
writable, hide the menu items for adding and removing favorites from the
dash menu. Additionally, reject drops to the dash for DND.
https://bugzilla.gnome.org/show_bug.cgi?id=741325
The code described by the comment was moved away in commit eda27d51,
so it is not misleading at best. It wasn't too useful to begin with,
so kill it off rather than moving it to the correct place ...
When using dynamic workspaces, a new workspace will be appended
when moving a window down to the last (empty) workspace. It makes
sense to extend the behavior in the opposite direction, and prepend
a new workspace when moving a window up from the first workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=665764
New workspaces are inserted by shifting all windows on workspaces
below the insertion position down. As a result, when the new
workspace is inserted before the active one, we end up with
the illusion of a workspace switch. Instead, activate the workspace
on which the windows from the active one ended up.
https://bugzilla.gnome.org/show_bug.cgi?id=665764
We are not supposed to mess around with OR windows, so don't try
to shift them to a different workspace. This fixes a warning with
newer versions of mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=665764
We will soon allow to insert a new workspace by other means than
DND in between workspace thumbnails, so move the relevant code
to a new windowManager method.
https://bugzilla.gnome.org/show_bug.cgi?id=665764
Input method preedit text needs to be disabled on password entries
for security and usability reasons.
IBus 1.5.7 provides the signal set-content-type so that panel UIs can
handle these special purpose input entries:
https://github.com/ibus/ibus/commit/6ca5ddb302c9
Unfortunately IBus versions older than 1.5.10 have a bug which causes
spurious set-content-type emissions when switching input focus that
temporarily lose purpose and hints defeating its intended semantics
and confusing users. We thus don't use it in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=730628
We check for (metasNeeded.length == 0) at the beginning of the function,
which is only ever called when when a non-zero number of results is
received back from the provider. Effectively, this means that
(metas.length != metasNeeded.length) will also catch (metas.length == 0)
and print a nicer message to the log.
The updateSearch() function is called in SearchResults every time new
search hits are available from a search provider; SearchResults will
wait for updateSearch() to complete in a callaback, to update the
overall progress of the search operation.
updateSearch() will call _ensureResultActors(), which will in turn call
getResultMetas() on the search provider, which is an operation that can
fail arbitrarily or return inconsistent data, as it's entirely in the
hands of the search provider.
In case _ensureResultActors() returns a failure, updateSearch() is
currently failing to notify the passed-in callback, which might leave
SearchResults in an inconsistent state: make sure the asynchronous flow
always ends up with a notification to the updateSearch() callback.
So that we'll recreate it the next time we want to show it. Otherwise,
we'll try to call things on a half-destroyed ResizePopup and end up
causing errors instead of showing the user their resize popup.
This will allow g-s-d to handle actions differently based on the
current mode - namely, allow the power button when locked, but
make sure to never show any dialogs in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=711682
Adding new parameters to the signal currently will break keybindings
until gnome-settings-daemon is updated to the new API as well.
Put additional parameters into a dictionary instead to make future
extensions easier.
https://bugzilla.gnome.org/show_bug.cgi?id=711682
When animating workspace switches, windows on the old and new workspaces
are temporarily reparented. If windows are restacked, those windows will
thus be ignored by mutter until meta_switch_workspace_completed() resyncs
the stacking at the end of the animation.
As a result, activating a window on another workspace that is not on top
of the stack is very noticeably a two-step operation of switching workspace
and raising the window. There is a technical reason for that order[0], but
we can avoid the visible disruption by manually syncing the stack during
the switch operation.
[0] https://git.gnome.org/browse/mutter/tree/src/core/workspace.c#n590https://bugzilla.gnome.org/show_bug.cgi?id=741680
Just like keybindings and the message tray pointer barrier, gestures
don't always make sense - for instance, swiping up the screen shield
should not trigger the message tray just as the SelectArea action around
the left edge should not open the overview.
To avoid this, restrict gestures based on the current keybinding mode.
https://bugzilla.gnome.org/show_bug.cgi?id=740237
In certain cases the timeout for starting the calendar helper can
be reached but the calendar helper still loads fine. If so, just
ignore the timeout and wait until we get a notification from
dbus of the successful start.
https://bugzilla.gnome.org/show_bug.cgi?id=735308
While the default Shell style is fairly decent with regard to
accessibility requirements, having the ability to tweak certain
aspects where the regular style works less well is still useful.
For this purpose, try to load a -high-contrast theme variant of
the default stylesheet when a high-contrast theme is requested
(as determined by the GTK+ theme name).
https://bugzilla.gnome.org/show_bug.cgi?id=740447
_hideDone checks _shown to determine if anything has shown the overview
while we hid it, and if so, shows the overview forward just in case.
In a local patch that called _hideDone immediately inside _hide for
testing, this broke. While we don't actually depend on this anywhere,
it doesn't hurt so that the next person to hack this up (perhaps me!)
doesn't get stuck debugging it for 20 minutes.
Since moving to a GFile based API in commit 642bf2b778,
setThemeStylesheet() no longer accepts %null to revert to
the default theme. We should have some way to revert to the
default and the least intrusive option is to return to the
old behavior, so do that.
Correctly computing the ISO week number is tricky and we already
have code in the platform to do it, so just refer its computation
to GDateTime rather than doing it ourselves.
https://bugzilla.gnome.org/show_bug.cgi?id=736722
Using a separate property to show when the application is busy rather
than cramming it into the state property makes the code clearer. In most
places we only care if an app is running or not, not whether it is
actually busy.
https://bugzilla.gnome.org/show_bug.cgi?id=736492
Due to a typo we were always removing the first (index 0) connection
from the global list of connections instead of the correct one.
This resulted in some connections remaining in the shell's connection
list long after they were removed. In particular, this resulted in
multiple copies of a bluetooth connection appearing after suspend/resume
(when the device was readded and the cached connection list was
rescanned).
https://bugzilla.gnome.org/show_bug.cgi?id=740227
I was going to add another DBus property to signal when the shell was
done loading and was idle, and while implementing that I noticed we
aren't emitting PropertyChanged for, well, any property. Let's fix
OverviewActive.
It's unfortunate it's so tedious to correctly implement a DBus
property =/
https://bugzilla.gnome.org/show_bug.cgi?id=704163
Currently, shellDBus only uses the passed in monitor index if it's
strictly > 0. A zero-index monitor is a valid one though, so don't
restrict this to strictly positive indices.
https://bugzilla.gnome.org/show_bug.cgi?id=740074
Commit 1291bcd0c8 implemented it for dateMenu, but the function
is already used in screenShield as well. Just add it globally as
we do for other standard gettext "macros".
Normally users switch xkb input sources and ibus input sources.
But currently the first input source only is running. It's also good
to preload all ibus engines in the logging session so that users switch
input sources quickly without the launching time of input sources.
The following is the ibus change:
https://github.com/ibus/ibus/commit/cff35929a9https://bugzilla.gnome.org/show_bug.cgi?id=695428
WorkspacesDisplay relies on being hidden to disable workspace switches
by scrolling or panning. Usually viewSelector will hide the previous
page on page switch, but we currently miss the case when opening the
overview at the app picker, where the workspaces page is still shown
for the transition, but never hidden.
Fix this by calling hide() in addition to setting the opacity to 0 at
the end of the overview animation.
https://bugzilla.gnome.org/show_bug.cgi?id=737534
Calling g_dbus_proxy_new without any flag means that the caribou
daemon will be launched through D-Bus activation, when creating
a proxy. It smoked out some corner cases in caribou and at-spi2-core,
but generally it would be good to avoid creating unused process.
This patch delays the invocation until the "Run" method is called.
https://bugzilla.gnome.org/show_bug.cgi?id=739712
Leading zeros are common in the 24h format, and indeed used in the
wallclock in the top bar. Convention and consistency within the
same clock format trumps inconsistency between different time formats,
so reverting commit 316f825b2a.
https://bugzilla.gnome.org/show_bug.cgi?id=658675
