When set to fill, the label will always end up left-aligned, which
is only correct in LTR locales. Set the alignment explicitly to
work in both RTL and LTR locales.
https://bugzilla.gnome.org/show_bug.cgi?id=712596
When set to fill, the label will always end up left-aligned, which
is only correct in LTR locales. Set the alignment explicitly to
work in both RTL and LTR locales.
https://bugzilla.gnome.org/show_bug.cgi?id=712638
When set to fill, the label will always end up left-aligned, which
is only correct in LTR locales. Set the alignment explicitly to
work in both RTL and LTR locales.
https://bugzilla.gnome.org/show_bug.cgi?id=712638
Filtering out "non-interesting" windows beforehand as we currently do
means that we may get properties that should be based on all windows,
like the last time the application was used, wrong.
Just track all windows and filter out non-interesting windows manually
in the one place we actually care about the difference.
https://bugzilla.gnome.org/show_bug.cgi?id=719824
As far as I can tell, the only behavior change of a transient source
is that they auto-destroy after viewing their summary box pointer.
Since all transient sources are only associated with transient
notifications, it seems that we can never get to their summary box
pointer in the first place! Remove support for this.
https://bugzilla.gnome.org/show_bug.cgi?id=710115
Rather than implement special focus policies like only allowing keynav
when pressing down, simply give the active page key focus when entering
the overview.
This may break stuff, as it's somewhat of a tricky patch to get right.
Testing this one would be super appreciated.
https://bugzilla.gnome.org/show_bug.cgi?id=644306
Simply use St's existing key navigation system by making all the window
clones StWidgets, and making the WorkspacesView a focus group.
Since the workspace view is effectively "fake", we need to add a focus
delegator so that when key focus is assigned to the fake workspaces page,
we can keynav inside it properly.
https://bugzilla.gnome.org/show_bug.cgi?id=644306
For mysterious reasons I'm not sure of myself, navigate_focus will only focus
mapped actors. So, make sure the widget is showing before navigating to it.
https://bugzilla.gnome.org/show_bug.cgi?id=709853
If the background is already removed, or we're trying to remove bad content,
this is probably a bug in content accounting, so let us crash so we can fix
the bugs.
https://bugzilla.gnome.org/show_bug.cgi?id=719803
Stomping on local variables and trying to keep loop state isn't
too fun. Just use a new variable here so we aren't too confused
with what we're doing.
https://bugzilla.gnome.org/show_bug.cgi?id=719803
We don't have any better way of determining whether something is a slideshow
animation, so discriminate on the .xml filename instead of waiting for
gdk-pixbuf to determine whether it can load a file or not.
https://bugzilla.gnome.org/show_bug.cgi?id=719803
The destroy vfunc might be called during object finalization, and
we can't call any JS from a GC finalizer, so we use a signal
connection instead, as that is removed by GObject the first time
the object is disposed.
https://bugzilla.gnome.org/show_bug.cgi?id=719730
After a user types in their password at the login screen, one
of two things can happen
1) a new session is started
2) an existing session is switched to
In the latter case, GDM sends a reset signal to the login screen,
so it knows to go back to the user list and wait to be summoned
again.
Unfortunately, all reset signals are ignored after verification
success. The reason is because the reset handler was copied from
the unlock dialog as part of a deduplication effort in commit
7e7295f259 and the unlock dialog
handler at the time also emitted a "failed" signal on reset
(which wouldn't make sense to emit after success).
These days "failed" is handled in a different way.
This commit changes the code to let reset signals through after
successful verification.
https://bugzilla.gnome.org/show_bug.cgi?id=710456
AppDisplay queues a deferred work to load frequently used apps when the
apps page is loaded. Unfortunately, when the overview is first opened,
all the pages start out visible and then immediately get hidden, so the
deferred work runs immediately after the first overview opening, whether
the user was going to view their frequent apps or not.
Start all pages off as hidden, and rearrange the code so that pages are
only shown when they really need to be.
https://bugzilla.gnome.org/show_bug.cgi?id=712753
This is also exposed in the ShowOSD DBus method, the "monitor"
parameter may contain an integer to indicate the monitor number.
If the value is not provided or <0 is used, the monitor is shown
on the primary monitor as usually.
This way, the OSD can be used to notify upon events that solely
apply to one monitor, like tablet mapping as discussed in
https://bugzilla.gnome.org/show_bug.cgi?id=710373.
https://bugzilla.gnome.org/show_bug.cgi?id=712664
You would think we would already do something like this, but apparently
lots of code was calling hide() without checking if the box pointer was
already visible, causing it to queue a full tween. The biggest win was
with ibusCandidatePopup.js, which called hide() on every DBus message.
This increases the performance for me to enter the overview by a tiny
bit. The remaining time is spent updating the frequent apps / all apps
display.
https://bugzilla.gnome.org/show_bug.cgi?id=712727
The methods we call in _updateState may not be reentrant, so make
sure that we never get into a situation where _updateState, through
some crazy chain of events, calls itself.
https://bugzilla.gnome.org/show_bug.cgi?id=711694
Rather than scanning all apps for searching, use Ryan's new desktop
file index and the glib support APIs for app searching instead of our
own system.
https://bugzilla.gnome.org/show_bug.cgi?id=711631
If monitor-changed fires at startup, it will destroy all of the
backgrounds, but since this._isStartup is true, won't recreate any
of them. Additionally, since _bgManagers is indexed by monitor index,
if the primary index is not 0, it could become a sparse array (e.g.
[undefined, undefined, primaryBackground]), and our for loop will
crash trying to access properties of undefined.
Fix both of these issues by always creating background managers for
every monitor, hiding them on startup but only showing them after
the startup animation is complete.
One thing we need to watch out for is that while LayoutManager is
constructing, Main.uiGroup / Main.layoutManager will be undefined,
so addBackgroundMenu will fail. Fix this by passing down the uiGroup
to the background menu code.
https://bugzilla.gnome.org/show_bug.cgi?id=709313
If desktop icons are enabled and not covered by maximized windows,
we will fade them in/out during overview transitions. However when
moving background handling into mutter/gnome-shell, we ended up with
the overview background on top of the DESKTOP window clone, hiding
the fade transition.
Fix the stack order to bring the effect back.
https://bugzilla.gnome.org/show_bug.cgi?id=707671
Our gnome-shell tweener integration has had hooks to determine when
the tweens have started and completed... except that they had a bug
in them. When a tween completed, it queued an idle handler to run
the callback in. If no tweens were running when the idle was removing,
it reset the tween state that contained the idle handler ID. It also
returned false, meaning that the source would always get removed.
If the actor had a tween in-flight when the idle was fired, it wouldn't
clean up after itself. While this is also a simple bug fix, remove the
callback so we don't queue unnecessary, unused idles.
https://bugzilla.gnome.org/show_bug.cgi?id=711732
Removing an existing source before scheduling a new one is not wrong,
but slightly less effective than doing nothing and relying on the
previously created source to do the job.
https://bugzilla.gnome.org/show_bug.cgi?id=711555
As the handler returns false, the corresponding source is removed
automatically and its id invalidated. Reset the id to 0 to reflect
this, otherwise newer versions of GLib will print a warning when
we later try to remove it explicitly.
https://bugzilla.gnome.org/show_bug.cgi?id=711555
There's a potential race condition in the search code: if we have an
outstanding search call to a provider for search "A", and if before it comes
back we do a subsearch for "AB", we won't have any results to pass along.
Previously, we used an empty list when storing the provider results, so we
effectively told the remote search app to filter through this empty list for
any search results that meet the new query, meaning we showed the user 0
results for the provider in this case.
Now that we don't store an empty list, but instead store `undefined`, this race
raises a warning. Solve it by doing an initial search query in this case
instead.
The search code isn't too smart about chained subsearches: now, if we hit this
race while already on a subsearch, we'll do an initial search for the subsearch
query instead, but that is much better than showing the user nothing. This
could be fixed in the future for a performance improvement.
Reviewed-by: Florian Müllner <fmuellner@gnome.org>
When a notification becomes expanded, it's either already shown,
or in the process of being shown. Don't set the state to SHOWING
again, which confuses our state machine.
The asynchronous nature of extension loading, session loading, and more,
makes the code racy as to what is initialized first, and hard to debug.
Additionally, since gjs is single-threaded, the only code we're running
in a thread anyway is readdir, which is going to be I/O bound, so the
code here is actually likely to be faster.
Drop this in favor of some good old fashioned synchronous loading.
We currently only ensure that width and height are positive, so it
is still possible to pass in values that don't make any sense at all
(which may even result in a crash when exceeding limits imposed by
X11).
There is nothing to screenshot outside the actual screen area, so
restrict the parameters to that.
https://bugzilla.gnome.org/show_bug.cgi?id=699752
We want to move away from gnome-menus eventually, so the simple
utility method isn't really worth keeping around. Reimplement it
in the one place that uses it.
https://bugzilla.gnome.org/show_bug.cgi?id=698486
Long ago, the search system worked in a synchronous manner: providers
were given a query, and results were collected in a single array of
[provider, results] pairs, and then the search display was updated
from that.
We introduced an asynchronous search system when we wanted to potentially
add a Zeitgeist search provider to the Shell in 3.2. For a while, search
providers were either async or sync, which worked by storing a dummy array
in the results, and adding a method for search providers to add results
later.
Later, we removed the search system entirely and ported the remaining
search providers to simply use the API to modify the empty array, but the
remains of the synchronous search system with its silly array still
lingered.
Finally, it's time to modernize. Promises^WCallbacks are the future.
Port the one remaining in-shell search engine (app search) to the new
callback based system, and simplify the remote search system in the
process.
`a + b ? c : d` is parsed as `(a + b) ? c : d`, not the more intuitive
`a + (b ? c : d)`.
This was causing a bad slide animation and Clutter warnings when coming
out of the overview.
The org.gnome.login-screen schema contains a key to disable the
power/restart buttons; our support for this fell victim to the
new combined status menu, add it back.
https://bugzilla.gnome.org/show_bug.cgi?id=711244
Before, workspacesOnlyOnPrimary was implemented in quite a crazy manner:
* If workspacesOnlyOnPrimary was false, we'd create one WorkspacesView per
monitor, with the primary one being a bit special.
* If workspacesOnlyOnPrimary was true, we'd create one WorkspacesView, and
additional montiors would be handled inside that WorkspacesView as
"extra workspaces".
This caused numerous bugs as the two modes weren't consistently
implemented, and a lot of code was duplicated between all the modes.
Fix this by always creating WorkspaceViews, even if it only handles
one interface. We do this by having two different WorkspacesView-ish
classes: WorkspacesView handles the traditional combination of lots
of workspces, and a new ExtraWorkspaceView is in control of only one
workspace.
Right now, the workspace update code is complex and spread across parts:
WorkspacesView takes a set of workspaces and looks like it owns them, but
WorkspacesDisplay is actually in charge of setting them up and creating
new ones for each WorkspacesView.
Change initialization and handling to move all of the creation/destruction
responsibilities to WorkspacesView.
We pass in monitorIndex into each WorkspacesView, which is a lie in the
workspacesOnlyOnPrimary case, as the primary WorkspacesView currently has
the responsibility of handling the extra workspaces on all the other
monitors. The commit will clean this up and punt the responsibility back
to WorkspacesDisplay.
Not because ClutterActor is bad or wrong, but because I always get
confused on the difference, and having them both in SlideLayout
makes the code a bit easier to read and understand.
The parent SlidingControl had an onOverviewShowing, but we had
overridden it with the same code in both subclasses. Just move it
back to SlidingControl.
When we create a result actor, cache it, so it can be used for
subsearches of the same initial. For now, to keep memory usage
and the stage graph relatively clean, don't persist the actors
across searches, but maybe we should do this in the future.
This also means that we don't query getResultMetas for items
that we've seen in the same initial search.
https://bugzilla.gnome.org/show_bug.cgi?id=704912
The existing provider system is split between a confusing mess of
RemoteSearch, SearchSystem, SearchDisplay, and ViewSelector, partly
because of the vestigal in-shell search system. Move most of the
logic to search.js so it's easier to read.
We fetch and store the list of providers from the search system when we
construct SearchResults, but we never update this list when providers are
changed at runtime, causing various bugs making the search not seem as
snappy as it should be. Make sure to always fetch the list of providers
from the search system.
While the existing comment is correct in that a source's notifications
will be destroyed first, the code takes a shortcut which prevents the
Source::count-updated signal from being emitted. Given that the purpose
of the signal is to keep notification counters up-to-date which is
pointless when the source is about to be destroyed, the shortcut makes
sense; just save notifications explicitly in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=710596
search.js used to do a lot more, but now that most of the
functionality has been moved to the remote search system,
it doesn't do a lot. Merge searchDisplay.js into it.
It's been broken for quite a bit since we removed Panel.Animation,
and hasn't really ever worked with our new search results. It's also
the only non-remote provider left.
Maybe we'll add it back as a remote provider later, but for now, just
ditch it.
The new API is designed to support features like persistence and uses
the new org.freedesktop.Application specification for activating
actions on notifications. While we won't add support for persistence
yet, implement the new notification spec with parity of the old one.
https://bugzilla.gnome.org/show_bug.cgi?id=710137
Some consumers may want to construct their buttons specially, so allow them
to do that by adding a new API that takes a button instead of a label.
https://bugzilla.gnome.org/show_bug.cgi?id=710137
Their use blocks activation of the default button by keyboard, which
is important for accessibility. Use a Clutter.ClickAction instead,
which doesn't have this problem as it only considers mouse events.
https://bugzilla.gnome.org/show_bug.cgi?id=710144
Otherwise, when closing the tray, we'll try to focus an actor, which will
focus the stage window, which will drop the focus from whatever window we
already had focused.
https://bugzilla.gnome.org/show_bug.cgi?id=710347
The application picker will always open with the view that was last
selected during the session, but the selection is reset on each
restart. This results in some annoyance for users that use the
ALL view exclusively, as they have to toggle views once each
session - the same would apply to exclusive FREQUENT view users
were the defaults to be changed, so the best solution is to simply
make the selected view persistent by storing it in GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=710042
If we pushNotification the same notification multiple times, we
won't append it to the array again, but we will attach multiple
handlers needlessly.
https://bugzilla.gnome.org/show_bug.cgi?id=710115
oVirt is software for managing medium-to-large scale deployments of
virtual machine guests across multiple hosts. It supports a feature
where users can authenticate with a central server and get
transparently connected to a guest system and then automatically get logged
into that guest to an associated user session.
Guests using old versions of GDM support this single-sign-on capability
by means of a greeter plugin, using the old greeter's extension
API.
This commit adds similar support to the gnome-shell based login screen.
How it works:
* The OVirtCredentialsManager singleton listens for
'org.ovirt.vdsm.Credentials.UserAuthenticated'
D-Bus signal on the system bus from the
'org.ovirt.vdsm.Credentials'
bus name. The service that provides that bus name is called
the oVirt guest agent. It is also responsible for interacting
with the the central server to get user credentials.
* This UserAuthenticated signal passes, as a parameter, the a token
which needs to be passed through to the PAM service that is specifically
set up to integrate with the oVirt authentication architecture.
The singleton object keeps the token internally so it can be queried
later on.
* The OVirtCredentialsManager emits a signal 'user-authenticated' on
it's object once the dbus signal is triggered
* When the 'user-authenticated' signal is emitted, the login screen
tells GDM to start user verification using the PAM service. The
authentication stack of the service includes a PAM module
provided by oVirt that securely retrieves user credentials
from the oVirt guest agent. The PAM module then forwards those
credentials on to other modules in the stack so, e.g.,
the user's gnome keyring can be automatically unlocked.
* In case of the screen shield being visible, it also will react on that
'user-authenticated' signal and lift the shield.
In that case the login screen will check on construction time if
the signal has already been triggered, and a token is available.
If a token is available it will immediately trigger the functionality
as described above.
Signed-off-by: Vinzenz Feenstra <evilissimo@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=702162
Allow the prefix 'special:' applied to result IDs to mark results
that should be always shown, even when they would overflow the
maximum results cap. This will be used by epiphany for the special
"Search the Web" result.
https://bugzilla.gnome.org/show_bug.cgi?id=707055
NotificationDaemon doesn't pass a gicon to the Notification constructor,
because it calls .update() immediately after, so messageTray.js
calls into Source.createIcon(), which returns null and crashes.
Instead, shortcut the Notification constructor by skipping
.update() completely.
https://bugzilla.gnome.org/show_bug.cgi?id=709998
The _background hack was added because the old way the zooming animation
worked, it set the allocation of the workspaces view and thumbnails box
to the final position and used animations to smoothly animate.
During the 3.6 cycle when we added the new search view, Cosimo changed the
way the zoom animation works so that rather than set the final allocation
and animate, we actually do adjust the allocation of the workspaces view
and thumbnails box.
So, as the hack is no longer necessary, we can drop it.
https://bugzilla.gnome.org/show_bug.cgi?id=694881
In order for the workspace thumbnails box to have the correct size,
we need to constrain the width of the thumbnails box to the height we're
given, instead of assuming an unlimited height.
https://bugzilla.gnome.org/show_bug.cgi?id=694881
We cannot wait for the queued update region to fire when
xdnd is being used because a wrong input shape can result
into a xdnd leave event when the user moves the pointer fast.
https://bugzilla.gnome.org/show_bug.cgi?id=708887
Since the agregate menu does 120% of font-size, make this
for all dropdown arrows in gnome-shell and rename the css
class to make clear that it is used in overall gnome-shell
https://bugzilla.gnome.org/show_bug.cgi?id=709564
According to the designs, the notifications switch was supposed
to move from the user menu to the new message tray menu. However
so far the new system status implementation only removed the old
switch, so add it back in its new place now.
https://bugzilla.gnome.org/show_bug.cgi?id=707073
Because of the animation and collision with relayout, the title of windows in overview may not appear, mainly
the first time we enter in overview
With an animation delay of 0.1s, you'll not see the difference
https://bugzilla.gnome.org/show_bug.cgi?id=709392
Show "Hardware Disabled" when disabled by HW switch, and
generically "Disabled" when airplane mode is active, as
indicated by v4 mockups.
Note that bluetooth is not affected by NM handling of airplane
mode (and generally the firmware makes the USB bluetooth
adapter disappear when rfkilled), so this is in NMDeviceModem
instead of NMConnectionDevice.
https://bugzilla.gnome.org/show_bug.cgi?id=709043
Since commit 1242a16265, we will use a fake prompt which
cancels alls requests without dialog when the keyring component
is disabled. However this does only apply to new requests, dialogs
that are already active when the session mode changes are kept
open. This is not quite as expected, so cancel the prompt in that
case.
https://bugzilla.gnome.org/show_bug.cgi?id=708910
The property is on the NMClient, not NMDevice. Also, make sure
we disconnect the signal when the item is destroyed.
Also, connect to wireless-hardware-enabled, which we'll use soon.
https://bugzilla.gnome.org/show_bug.cgi?id=709635
Destroying the notification will make the key focus be reset to NULL, which
means that gnome-shell will try to focus the MRU window, thinking the user is
done interacting and wants to go back to whatever they were doing.
Unfortunately, since we focus two windows at the same time, they will have
the same timestamp, meaning that the window that actually gets focused will
be a race as to whoever responds to their WM_TAKE_FOCUS event last.
If we explicitly set the focus beforehand, then gnome-shell will believe it
got key focus taken away from it, and won't try to focus the MRU when the
key focus drops to NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=703265
We must reduce the forWidth in the call to get_preferred_height()
with the border width, otherwise we might request a smaller height
that we actually need and overflow.
https://bugzilla.gnome.org/show_bug.cgi?id=696564
If the active connection for the device is not the primary or
activating globally, it won't have the _connection and _primaryDevice
expando properties, so grab them from the settings object.
https://bugzilla.gnome.org/show_bug.cgi?id=709043
The patch fixes the following warning, and along with it, the proper
destruction of the NMConnectionSection is performed so that items get
correctly removed from the menu.
(gnome-shell:24528): Gjs-WARNING **: JS ERROR: TypeError:
this.statusItem is undefined
NMConnectionSection<.destroy@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:173
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
_parent@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:175
NMConnectionDevice<.destroy@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:292
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
_parent@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:175
NMDeviceModem<.destroy@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:448
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
NMApplet<._removeDeviceWrapper@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:1421
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
NMApplet<._deviceRemoved@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:1416
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
https://bugzilla.gnome.org/show_bug.cgi?id=709248
Don't assume that this._bgManagers.push() (i.e adding to the end) is always
correct.
On startup we call _createPrimaryBackground which passes in the primary index
which may not be 0.
We connect to the changed signal in _init() but never actually disconnect from
it. The callback has a reference to "this" which results into the background
object not getting garbage collected.
Fix that leaks by disconnecting in _destroy()
https://bugzilla.gnome.org/show_bug.cgi?id=709263
