Currently the HistoryManager consumes all arrow up/down key presses
unconditionally. Change this to only consume the event if the entry
text was actually changed, e.g. not when trying to move past the
first/last item.
https://bugzilla.gnome.org/show_bug.cgi?id=682243
Various code around had different paths for ConsoleKit and
logind. Consolidate it by making an abstract class that all
callers can use, which hides the implementation details of the
two daemons.
https://bugzilla.gnome.org/show_bug.cgi?id=682096
In preparation for accessing it in the screenshield, factor out
common code for ConsoleKit and Systemd.
Also, clean up ConsoleKit manager, as the daemon is required in
a non systemd installation. In particular:
- We allow it to be autostarted at session startup (or really,
we expect it to be already there, started by GDM during session
opening).
- We no longer silently assume that the session is active if
it can't start.
https://bugzilla.gnome.org/show_bug.cgi?id=682096
This is a bare-bones copy/replace. It does not implement ChangeLog
support. If we cannot get System Updates integration, I will implement
notification support.
https://bugzilla.gnome.org/show_bug.cgi?id=679099
When PackageKit signals that it prepared an update, offer an option
to reboot and apply it, using a helper that will setup the next
reboot and then calling to gnome-session.
https://bugzilla.gnome.org/show_bug.cgi?id=677394
When connecting to virtual machines with usb-device redirection, such as Spice
enabled vms, automount may get in the way. Specifically if auto-usbredir is
enabled in the vm-viewer, then the usbredir code and the automount code race
for who gets to the device first.
If the automount code wins the race this is a problem, since usbredir causes a
device-disconnect (iow the usb mass storage driver sees an unplug), so in the
end usbredir always wins, and we end up with a non clean potentially corrupt
filesystem. Also see:
https://bugzilla.redhat.com/show_bug.cgi?id=812972
There for the need exists to be able to inhibit gnome-shell's automounting,
since all other inhibits run through gnome-session, I've chosen to do the same
for the automount-inhibiting. I've also submitted a patch to gnome-session to
reserve flag value 16 for this, see bug 678595.
This patch adds support to gnome-shell to honor this new inhibit flag.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=678597
The dependency chain spirals out from folks->zeitgeist->xapian...and
I'm really not interested in pulling in all of that into the core
shell.
There is work on splitting out contact search into gnome-contacts; I'd
add a bug link but Bugzilla is down.
This allows us to move to a file-monitor based approach in the future.
Since we need signals, we convert the current set of functions to an
object we attach signals too, leading to the new ExtensionFinder object.
https://bugzilla.gnome.org/show_bug.cgi?id=677586
This is seldomly used, and isn't checked in SweetTooth. Just remove
this inconsistency here rather than adding infrastructure to manage
and check it elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=677586
Some extensions may have complex layouts with multiple subdirectories.
Currently, getCurrentExtension doesn't support this, as it uses a regex
and assume's that the last path's component's parent is all that's needed.
Fix this.
https://bugzilla.gnome.org/show_bug.cgi?id=677001
gnome-shell-extension-prefs uses format(), but can't pull in Shell
(which is a dependency for the module), since that in turn would pull in
Meta. Fix this by moving the introspected int format function to ShellJS
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=673106
gnome-session moved away from using properties over DBus in 2008, which
means that the code in GNOME 3.0 never should have worked -- but it did,
which makes me suspect that it was a quirk of the GJS DBus implementation.
Switch over to the proper inhibitor API, which is based on methods. If
gnome-session eventually gets ported to GDBus, then we can switch back
to properties.
https://bugzilla.gnome.org/show_bug.cgi?id=672270
Although not all "Finding and reminding" applications are ready
yet, the integration with gnome-documents' search results overlaps
enough with the "Recent Items" provider to justify its removal.
https://bugzilla.gnome.org/show_bug.cgi?id=670150
Substitutions generated by configure don't resolve prefixes, so
cannot be used for paths. Config already had localedir, and next
commit will need libexecdir and sysconfdir, so just bite the bullet
and move to sed.
https://bugzilla.gnome.org/show_bug.cgi?id=658484
Gsm.GetRegistrationInfo and Cdma.GetServingSystem return a single argument
consisting of a tuple, not three separate arguments. This is
a regression from the GDBus port.
https://bugzilla.gnome.org/show_bug.cgi?id=670005
The "extension" object is what I previously called the "helper" object.
It contains the extension importer object as well as the metadata object.
Things that were previously added on to the metadata (state, path, dir, etc.)
are now part of this new "extension" object.
With the new importer changes brought on by the extension prefs tool,
extensions are left without a way to import submodules at the global scope,
which would make them rely on techniques like:
var MySubModule;
function init(meta) {
MySubModule = meta.importer.mySubModule;
}
That is, there's now a lot more meaningless boilerplate that nobody wants
to write and nobody wants to reivew.
Let's solve this with a few clever hacks.
Allow extensions to get their current extension object with:
let extension = imports.misc.extensionUtils.getCurrentExtension();
As such, extensions can now get their own extension object before the
'init' method is called, so they can import submodules or do other things
at the module scope:
const MySubModule = extension.imports.mySubModule;
const dataPath = GLib.build_filenamev([extension.path, 'awesome-data.json']);
https://bugzilla.gnome.org/show_bug.cgi?id=668429
Add two new APIs, "launchExtensionPrefs" to let SweetTooth let the user
launch the extension preferences tool directly from the browser. To allow
SweetTooth to check if an extension can be configured, add a new key to
the 'metadata', 'hasPrefs', which is returned by the GetExtensionInfo/
ListExtensions DBus methods.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
A new tool, 'gnome-shell-extension-prefs' can load a new entry point from
extensions, 'prefs.js', which has an entry point to return a GTK+ widget.
This allows extensions to have their own preferences dialog, without each
extension needing to ship its own Python script and .desktop file.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
ExtensionUtils is a new module that has a lot of miscellaneous things related
to loading extensions and the extension system put into a place that does not
depend on Shell or St.
Note that this will break extensions that have with multiple files by replacing
the old uuid-based importer with an object directly on the meta object.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
The loop can exit with an interval of length one or one of
length zero. In the first case it is correct to check which side
of the interval to return, in the second case no comparison should
be made (since there is only one possible value).
In practice, this usually results in one comparison more than needed,
but in some cases (when the position was past the end of the array),
would call the comparator with undefined.
https://bugzilla.gnome.org/show_bug.cgi?id=666614
Adds two new functions, Util.lowerBound and Util.insertSorted,
that take an array, a value and a comparator, and find the
first position at which the value can be inserted without
violating the order, in optimal time.
https://bugzilla.gnome.org/show_bug.cgi?id=666429
The last patch in the sequence. Every place that was previously
setting prototype has been ported to Lang.Class, to make code more
concise and allow for better toString().
https://bugzilla.gnome.org/show_bug.cgi?id=664436
This continues the series of patches for GDBus porting, affecting
all code that accesses remote DBus objects. This includes modemManager,
automount, autorun (for the hotplug sniffer), calendar, network (for
nm-applet only), power, scripting (for perf monitor interface)
https://bugzilla.gnome.org/show_bug.cgi?id=648651
Port org.gnome.ScreenSaver and org.gnome.SessionManager glue code
to use GDBus, and move /org/gnome/Shell/EndSessionDialog to the
GDBus connection, so it is backed by the org.gnome.Shell name.
https://bugzilla.gnome.org/show_bug.cgi?id=648651
js2-mode is no longer developed and we recommend js-mode these days,
so switch the modelines to specify that, and make them consistent
across all files.
https://bugzilla.gnome.org/show_bug.cgi?id=660358
libsoup won't check for a valid cert by default, so copy some logic from
glib-networking to check against the system cert list. Additionally, allow a
fallback for developers, ~/.local/share/extensions.gnome.org.crt, for easy
local development of the website.
https://bugzilla.gnome.org/show_bug.cgi?id=658870
For those who like their system pure, this provides the ability to purge a
pesky extension and its precious place on your disk space, and in your
"Local Extension" list.
https://bugzilla.gnome.org/show_bug.cgi?id=658612
Conflicts:
js/ui/extensionSystem.js
findUrl() was seeing strings like "You have 1 new message in
foo@example.com/Inbox" and finding the URL
"[http://]example.com/Inbox". Require that URLs either start at the
start of the string, or are preceded by whitespace or an open
paren/quote/etc.
(Since JS doesn't have look-behind assertions like perl does, we have
to actually match the URL-preceding character in the regex, and then
adjust the result findUrl returns accordingly.)
https://bugzilla.gnome.org/show_bug.cgi?id=636252
Although "x:5" could theoretically be a URL with scheme "x" and path
"5", it probably isn't. Only URLify strings that use the "authority"
syntax ("foo://"). (No one ever types out "mailto:" URLs in ordinary
text, so we don't want to match those either.)
https://bugzilla.gnome.org/show_bug.cgi?id=636252
Explode the regex onto multiple lines, and add comments explaining the
pieces. Also, change ()s to (?:)s (non-capturing groups) where
appropriate, and replace the UTF-8 characters with \u escapes so that
they actually work.
https://bugzilla.gnome.org/show_bug.cgi?id=636252
Fix the signal handling; you can't use this.connect('ActiveChanged')
to connect to a D-Bus signal after replacing the signal methods with
the lang.signals versions. Just leave it using the D-Bus signal names,
just like it uses the D-Bus method names.
Also, remove the "_" from "_screenSaverActive", to match what
AutomountManager checks for, and remove getActive(), since it's not
needed.
https://bugzilla.gnome.org/show_bug.cgi?id=654550
Due to lockdown settings or Polkit policy, shutdown may not be
available. If this is the case, the "Power off ..." action should
be hidden from the user status menu.
https://bugzilla.gnome.org/show_bug.cgi?id=652038
If the user typed "a", hit up, and pressed enter again, we wouldn't re-set the
history pointer to the end, so the broken navigation would instead go to the
entry before that.
https://bugzilla.gnome.org/show_bug.cgi?id=648765
In commit 9bd22dc0, I introduced an API to load an arbitrary
.desktop file, not necessarily from the menu path. It turns
out this function was broken because it created ShellApp instances
that were *different* from ones that were cached normally.
As far as I can tell, we didn't initially use it. Then later
Util.spawnDesktop was created which used this function.
Remove this broken function and all callers; if we're loading
.desktop files from *outside* the menu path, we can look at
readding.
This patch also kills off Util.spawnDesktop in favor of callers
talking to ShellAppSystem directly, now that the latter reports
errors.
https://bugzilla.gnome.org/show_bug.cgi?id=644402
Move the "system notification error" handling out of
util.js, and add it to ShellGlobal so we can start
calling it from across the codebase better (including
C).
https://bugzilla.gnome.org/show_bug.cgi?id=644402
Adds an implementation of nm-applet in javascript. Uses the new
introspection from NetworkManager, and temporarily requires
nm-applet to be running for the secret service.
Features a renewed interface, with each device controllable through
a switch, which if toggled off disconnects, and if toggled on
connects to the most recently used valid connection. More esoteric
features like creation of ad-hoc networks have been moved to the
control center panel.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
Around 2.91.90, gnome-session-save was renamed to gnome-session-quit.
This commit restores compatibility with the older gnome-session, for
those testing under GNOME 2.32 or below, by calling the DBus methods
directly.
https://bugzilla.gnome.org/show_bug.cgi?id=644591
Make GSettings support optional, refactor text entry handling,
fix some off-by-one bugs in the management itself, use Params
for parsing, fix other typos and bugs.
https://bugzilla.gnome.org/show_bug.cgi?id=642793
The DBus JS binding will complain if the signature of a method
or of a signal is undefined, so we need to define it even if it
is an empty string, and we need to use the correct property name
for signals.
https://bugzilla.gnome.org/show_bug.cgi?id=643374
runDialog and lookingGlass both implement a home-made history
manager, each working slightly differently than each other in
behavior and implementation.
Extract the behavior and implementation from runDialog, which
reads and saves to GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=642237
With workspace thumbnails, we don't switch workspaces when dragging windows
between workspaces or adding new workspaces, so we also shouldn't switch
on launch.
* Add workspace parameters to shell_doc_system_open(),
shell_app_activate, shell_app_open_new_window()
* Pass a 'params' object when activating items in the overview with
two currently defined parameters: workspace and timestamp. (timestamp
is only implemented where it is easy and doesn't require interface
changes - using the global current timestamp for the shell is almost
always right or at least good enough.)
https://bugzilla.gnome.org/show_bug.cgi?id=640996
Commit a65a0f03d4 changed the literal RegExp to a string-based
RegExp(). As backslashes are treated specially inside strings,
translating an expression as /\s/ to '\s' results in a faulty
regex of /s/, so escape backslashes where necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=639914
GenericDisplay used to provide a common base class for places and
recent items, none of which exists anymore. As of current mockups,
display items in "Finding and Reminding" should be based on
BaseIcon / IconGrid instead.
Since we have to use pkill, kludgily, for the right combination of
portability and featurefulness, put the code in one place rather than
duplicating it everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=635089
Add Util.spawn, Util.spawnCommandLine, and Util.spawnDesktop for
spawning a command/argv/.desktop file in the background, automatically
handling errors via MessageTray.SystemNotificationSource(), and
Util.trySpawn, Util.trySpawnCommandLine, and Utils.trySpawnDesktop
that don't do automatic error handling (but do at least clean up the
error message in the exception a bit).
Update various other bits of code around the shell to use the new
methods.
https://bugzilla.gnome.org/show_bug.cgi?id=635089
Rename imports.misc.utils to imports.misc.util for more consistency
(eg, with shell-util).
Also, use the string-based RegExp() constructor rather than a RegExp
literal, since the literal is extremely difficult to parse correctly,
and confuses emacs and probably other editors and thus messes up
autoindentation, etc.
https://bugzilla.gnome.org/show_bug.cgi?id=635089
Add an entry in config.js.in for PACKAGE_VERSION and GJS_VERSION,
to be used by the notification daemon and in the future by the
extension system.
https://bugzilla.gnome.org/show_bug.cgi?id=639255
The semantics of the first argument changed from literal -> regexp
if the 'g' option was specified. To remove ambiguity, stop using
the spidermonkey extension and create a standard RegExp object.
https://bugzilla.gnome.org/show_bug.cgi?id=630539
The current search system uses the OR operator to concatenate search
terms. While results which are matched multiple times sort before
other matches, it is almost guaranteed that adding an additional term
to the search increments the number of results, which is rather
surprising.
https://bugzilla.gnome.org/show_bug.cgi?id=610955
Sometimes it is useful to print numbers in hex format - add the
appropriate specifier. Also support a minimum field width to
pad the formatted string with spaces (or zeros if the width is
prefixed with '0').
https://bugzilla.gnome.org/show_bug.cgi?id=622597
Fetch the names of the user's "subscribed" contacts, and use the
SimplePresence interface to watch for available/away/busy/etc messages
and create notifications for them.
Currently we display notifications when switching between "available"
and "offline"/"extended away", but when switching between "available"
and "away"/"busy" we just add the information to the chat window
without popping up a notification, to avoid spamming the user with
"Bob's screensaver activated" messages.
https://bugzilla.gnome.org/show_bug.cgi?id=611613
Activate empathy when clicking on a chat icon by asking the
ChannelDispatcher to open the conversation in the default handler.
Also, remove the Approver and Handler for now, since until
telepathy-logger is stable, this means Empathy won't see (and log)
those conversations. This means that empathy's blinky status icon is
back; we'll have to do something else about that.
https://bugzilla.gnome.org/show_bug.cgi?id=611610
Cache avatars to avoid having to re-download them every session.
We use a cache format that is compatible with empathy's, but we don't
actually use empathy's. This could be changed if we wanted.
https://bugzilla.gnome.org/show_bug.cgi?id=614974
Also reorganizes the notification layout to use an StScrollView; very
tall notifications are now scrolled instead of just taking up more and
more of the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=608999
Brute force merge these two by essentially replacing St.TextureCache
with a (renamed) Shell.TextureCache.
One function was added for convenience, namely "st_texture_cache_load_file_simple".
St.TextureCache had a function to load a texture from a filename, and it
returned NULL on error but only half the callers actually checked this. This
function is better.
https://bugzilla.gnome.org/show_bug.cgi?id=607500
The high level goal is to separate the concern of searching for
things with display of those things; for example in newer mockups,
applications are displayed exactly the same as they look in the
AppWell.
Another goal was optimizing for speed; for example,
application search was pushed mostly down into C, and we avoid
lowercasing and normalizing every item over and over.
https://bugzilla.gnome.org/show_bug.cgi?id=603523
Rather of calling .exists() synchronously for all documents, use
ShellDocSystem's async API to only stat docs we're showing.
Use the doc opening functionality in ShellDocSystem.
Also, more intelligently do redisplay(); don't recreate actors
for recent docs if we already have one for that URI. We may
need more intelligent caching here; if e.g. just the associated
application changes, we should probably reread the info.
https://bugzilla.gnome.org/show_bug.cgi?id=603522
