Since commit 0c807bddaf, the run dialog no longer handles Escape
key presses itself but uses the action key mechanism of modal dialogs.
As the latter uses key-release events, our own handling of the Escape
key runs on key-press.
Fix this by bailing out early if anything has pushed a modal in addition
to the overview (like system modals, looking glass, ...).
https://bugzilla.gnome.org/show_bug.cgi?id=688196
Invalid ID errors from that function are normal, because the set
of IDs to acknowledge may not match the set in the connection manager
due to race conditions.
This is also what empathy does.
https://bugzilla.gnome.org/show_bug.cgi?id=683449
MessageTray._tween sets the state variable to the in-progress value,
so it must be sure that at the end of the animation the value will
be the corresponding final and nothing else will happen in between.
https://bugzilla.gnome.org/show_bug.cgi?id=683986
Since the introduction of overlay hover borders, there has a been
a timing disconnection between hiding the border and button, and
this creates noise and reduces the effect of the window+overlay
as a single unit.
Solve that by animating the close button too, so that the two actors
are shown and hidden always at the same time.
Also, consolidate the code to make it clear to future authors that
those two items need to stay coordinated.
https://bugzilla.gnome.org/show_bug.cgi?id=688966
Turns out that tweener has a very complex logic to decide when a new
tween on the same properties overrides completely the old, and unfortunately
what we were doing was not enough in all cases.
Just be explicit, and don't let anything else mess with the state.
https://bugzilla.gnome.org/show_bug.cgi?id=688895
On additional monitors the workspacesView takes up the entire monitor
and in some cases windows in overview can end up hard against the
edge of the monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=688133
The panel should change appearance according to the sessionMode,
so add a new panelStyle sessionMode property which allows to
specify a mode specific style class for the panel actors.
https://bugzilla.gnome.org/show_bug.cgi?id=684573
The panel corners overlap the panel in order to hide the underline
used for active buttons where it is supposed to arc downwards
following the roundness of the corner.
Unfortunately this prevents us from using a transparent panel background,
as the overlapped area ends up with the wrong transparency. Work around
this limitation by only overlapping the panel if there is a visible
border.
https://bugzilla.gnome.org/show_bug.cgi?id=684573
Commit c3cab28 removed bits setting the password char that was used to
allow typing the password after a failure but before the first question
for the new attempt came.
Without that code, in complex PAM setups you can end up with a visible
password.
https://bugzilla.gnome.org/show_bug.cgi?id=687113
Desktop files can specify if the application should only be shown for
specified desktops with OnlyShowIn and NotShowIn directives options.
If a menu category only contained entries for a different desktop, we
were still creating the category.
We now only add a category button if there is at least one application
to be displayed in this category.
https://bugzilla.gnome.org/show_bug.cgi?id=687970
We need to do a better job of indicating login process. This can
sometimes take a few seconds (particularly if you get your password
wrong): we need to give better feedback of what's going on.
This adds a spinner next to the login button if the authorization takes
some time.
https://bugzilla.gnome.org/show_bug.cgi?id=687113
The login dialog had these issues:
- the entry was not really disabled, you could still edit text
- the sensitivity state was not reset on verification failure
- the session list was not disabled
The unlock dialog had these issues:
- "Login as another user..." was not insensitive
- redundant password char setting, overwriting the one given by the
question
The entry insensitive style was also wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=687113
The "Sign In" button of the login dialog has its look disabled when the
entry is empty, but it can still be triggered by the Enter key.
This fixes the modal dialog so it does not trigger the action of an
insensitive button, and also means we do not need to connect to the
"activate" signal of the entry anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=687113
Make the button layout public for callers to be able to have more
control over like adding custom widgets. Also, the clearButtons and
addButton methods are added as convenience for the most frequent usage.
https://bugzilla.gnome.org/show_bug.cgi?id=687113
Open a modal dialog, try to open the message tray -> no effect, the message
tray is blocked by the dialog.
Close the dialog, try to open the message tray by pointer -> still
no effect, because the old timeout id was not cleared the first time,
so the dwell callback thinks the tray is about to open.
https://bugzilla.gnome.org/show_bug.cgi?id=688750
Windows in the overview should be highlighted when hovered, to indicate
they are an active target.
Based on a patch by Marc Plano-Lesay <marc.planolesay@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=665310
Setting auto-register to true launches the initial registration, and will
afterwards re-launch the agent registration if NetworkManager gets restarted.
When the component is disabled we'll first disable auto-registration, and only
then request to unregister.
https://bugzilla.gnome.org/show_bug.cgi?id=688379
The top panel and message tray icons were by default a gnome foot and
are replaced by better ones. The applications icon is now using the
symbolic apps icon of the dash, and the windows icon is also improved.
https://bugzilla.gnome.org/show_bug.cgi?id=641303
MessageTray tweens both opacity and y to hide or show _notificationWidget,
but only y when expanding it. This means that an existing tween to hide
the notification will continue running, clearing the notification state.
If the hiding one completes before the showing one, the onComplete handler
will throw an exception (because the notification was nullified) and
therefore break the state tracking.
https://bugzilla.gnome.org/show_bug.cgi?id=683986
Instead of adding search providers to the system as we find them, wait
until we loaded information from all the directories, and then add all
providers at once.
This will be useful when we will sort the providers information
according to the sort order saved in GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
The AnimatedIcon does not have an API for controlling the animation but
relies on the :visible property changes to start and stop a timeout used
to update the frame.
This has the inconvenient of having a side effect when visible is set to
true multiple times, and is not really the API expected from such
component. Also, there is a race if it is displayed before the images
are loaded: there is no child yet and thus we get this._frame = NaN
which leads to a crash.
Switch to a play/stop API instead, and add a load event callback to the
TextureCache.load_slice_image to exactly know when we can start using
the images.
https://bugzilla.gnome.org/show_bug.cgi?id=687583
As we now allow the ctrl-alt-tab popup on the lock screen, it should
be possible to navigate back from the top bar, so add the corresponding
elements to the switcher.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
The original condition the property was based on was added to make
the a11y switcher available in the login screen, though it did never
work properly - after popping up the switcher, additional tab key
presses were ignored. As we are now able to filter bindings much more
selectively, we can simplify the check and drop the sessionMode property.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
With the new flexible system in place, there's no point explicitly
hardcoding some built-in keybindings; just use the generic mechanism
for everything.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
Currently we hardcode the set of keybindings that are available in the
overview; add a generic mechanism to specify in which KeybindingModes
a keybinding should be available.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
For now we just use it to assign an identifier to modal modes in
which we want to allow some keybindings, but we don't use it for
any actual filtering; we'll start doing this shortly.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
We are currently using a hack to allow a select set of keybindings
in the overview. Implement the new MetaPlugin keybinding_filter
hook, which provides a cleaner way to achieve the same.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
Remove section titles for ethernet and mobile broadband, and replace
them with device status items that recognize if multiple devices are
installed in the same section, and if so automatically disambiguate.
https://bugzilla.gnome.org/show_bug.cgi?id=677142
Due to an oversight, the width of the password entry is currently
determined by the length of the message description. Fix the flags
so that the entry spans the entire width of the dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=684810
When updating the dash, we already avoid all animations while the
overview is hidden. However, as we are using Main.queueDeferredWork(),
updates may be deferred up to ~20 seconds while the overview is hidden.
If the overview is entered before a queued update has taken place, it
will be run immediately on map - as the overview is visible by then,
this means animating any outstanding changes.
Work around this by skipping animations during overview transitions as
well.
https://bugzilla.gnome.org/show_bug.cgi?id=686530
If the session mode has no locking support, screenshield had code to
unlock automatically, but it did so by checking the return value of
the constructor, instead of checking if the constructor was actually
callable, so it would get a TypeError before reaching the check.
https://bugzilla.gnome.org/show_bug.cgi?id=687708
At the moment, only the mouse can be used to focus and answer a chat
notification.
This adds a new keybinding (defaults to <Super>+n) to focus and expand
the active notification.
https://bugzilla.gnome.org/show_bug.cgi?id=652082
When in the overview, if you move the mouse cursor over one of the
application launchers in the dash, all the unrelated windows are dimmed
both both in the window view and in the workspace view.
It helps to easily understand whether or not there are already opened
windows for this application, and where they are. It can also help in
differentiating the windows in the overview (sometimes the thumbnails
aren't precise enough to easily know which thumbnail belongs to which
application).
https://bugzilla.gnome.org/show_bug.cgi?id=657315
This has also the benefit of getting the application even if it can not
be retrieved through AppSystem, which can happen if the runtime WMClass
does not match the one of the desktop file.
This especially looked wrong with the following commits related to the
bug.
https://bugzilla.gnome.org/show_bug.cgi?id=657315
We simply hide the label when the popup is opened instead of relying
on the popup state when the hover state change.
To do this we replace the flag isMenuUp by a 'menu-state-changed' signal
on the AppWellIcon. This simplifies the dash label visibility handling
code that need additional changes for the bug.
https://bugzilla.gnome.org/show_bug.cgi?id=657315
Initializing this synchronously means that we will possibly wait for the
process to be auto-activated and answering to our call.
If the process is already running it also might not answer immediately
our request, as it might be doing sync I/O.
The right thing to do is to initialize the proxy asynchronously; there
are try/catch blocks in place for when the object is not available, or
not properly initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
This is called in the main thread, which we should never block for
synchronous I/O.
Since the operation we're wrapping is async already, just use
g_file_query_info_async() instead.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
Remote search providers install an auxiliary keyfile to specify
static information, such as the object path/bus name needed to activate
the binary. Such keyfiles also specify the application the providers
pushes results for; currently, we support two formats for application
information
- two fields, "Title" and "Icon" that specify a (translatable) title and
an icon name for display
- one field "DesktopId" that specifies the desktop file name of the
application backing the provider, which obsoletes the previous
Title/Icon syntax
Since all providers in GNOME use DesktopId now, and we need to ensure a
remote search providers is always backed by an application for future
development, this commit drops the support for the older syntax.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
Switch from a ClutterDragAction to a ClutterGestureAction, that gives
us the velocity of mouse motion at each step, and use it to compute the
animation time for completing the hide gesture.
https://bugzilla.gnome.org/show_bug.cgi?id=682537
The background is the same as the normal desktop, so we blur and
desaturate it to clearly show that it's not the normal system state.
To do so, we don't use standard ClutterEffects, to avoid the FBO
indirection. Instead, we take advantage of MetaBackgroundActor support
for GLSL code and paint the shaded background texture directly.
https://bugzilla.gnome.org/show_bug.cgi?id=682536
After some changes, the tooltip label at the dash is not available
until it is visually shown. As this is not anymore a reliable
source of accessible name, we just set the accessible name
with the string used on that label.
https://bugzilla.gnome.org/show_bug.cgi?id=686583
If we lock before the user becomes active again, gnome-session will never
change presence from IDLE, and thus we'll never hide the lightbox.
Instead, install our own idle monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=687020
Entering the overview with the overlay key is done on key release but
exiting the overview on key press, which is inconsistent.
This change makes the overview hidden also on key release.
https://bugzilla.gnome.org/show_bug.cgi?id=683024
Adding a radial gradent to the dimming effect gives more depth to
the background.
Shading is computed in a GLSL fragment shader, and uses distance to
center of the screen to interpolate the darkening value to use.
Based on a patch by Pierre-Eric Pelloux-Prayer <pelloux@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=669798
The AnimatedIcon does not have an API for controlling the animation but
relies on the :visible property changes to start and stop a timeout used
to update the frame.
This has the inconvenient of having a side effect when visible is set to
true multiple times, and is not really the API expected from such
component.
Switch to a start/stop API instead. Also, update to the first frame at
startup while we are at it, since this is the expected behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=687583
You can't login until something has been entered in the password field.
We should therefore make the login button insensitive until you have
entered some text.
https://bugzilla.gnome.org/show_bug.cgi?id=687112
Notifications that are created in response to direct user actions like
"is ready" or "'foo' has been removed from favorites" should always be
displayed even though the user has marked him/herself busy.
https://bugzilla.gnome.org/show_bug.cgi?id=662900
The barrier was introduced to make the message tray hot corner
usable in multiple monitor setups. With the hot corner gone in
3.6, the pointer barrier doesn't make much sense anymore, so
remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=687457
Instead of keeping track of the old adjustment.upper keep track of the
old adjustment.value that corresponded to the bottom scroll position.
This fixes the integrated chatview not always scrolling to the bottom
by removing the assumption that page_size is constant between updates,
which is not the case as the view is presented in various different ways.
https://bugzilla.gnome.org/show_bug.cgi?id=686571
I've heard quite a bit of feedback from people who want to log out,
even if they are the sole user on their system. It doesn't seem worth
alienating them over this; so add a setting to make the 'Log out' item
always show up.
https://bugzilla.gnome.org/show_bug.cgi?id=686057
While we recreate icons on style changes elsewhere, the faded
icon in the application menu will stick around after icon theme
changes until another application is focused.
https://bugzilla.gnome.org/show_bug.cgi?id=687224
