ES6 allows to omit property names where they match the name of the
assigned variable, which makes code less redunant and thus cleaner.
We will soon enforce that in our eslint rules, so make sure we use
the shorthand wherever possible.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
Remove the `this.actor = ...` and `this.actor._delegate = this` patterns in most
of classes, by inheriting all the actor container classes.
Uses interfaces when needed for making sure that multiple classes will implement
some required methods or to avoid redefining the same code multiple times.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
The screen shield creates the unlock dialog based on the session mode.
However since commit 0c0d76f7d6 turned LoginDialog into an actor
subclass (while UnlockDialog kept using the delegate pattern), it is
no longer possible to handle both objects the same way without warnings.
Allow this again by turning UnlockDialog into an actor subclass as well.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/736
Those unused arguments aren't bugs - unbeknownst to eslint, they all
correspond to valid signal parameters - but they don't contribute
anything to clarity, so just remove them anyway.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
ES6 finally adds standard class syntax to the language, so we can
replace our custom Lang.Class framework with the new syntax. Any
classes that inherit from GObject will need special treatment,
so limit the port to regular javascript classes for now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/361
When not using arrow notation with anonymous functions, we use Lang.bind()
to bind `this` to named callbacks. However since ES5, this functionality
is already provided by Function.prototype.bind() - in fact, Lang.bind()
itself uses it when no extra arguments are specified. Just use the built-in
function directly where possible, and use arrow notation in the few places
where we pass additional arguments.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/23
Any symbols (including class properties) that should be visible
outside the module it's defined in need to be defined as global.
For now gjs still allows the access for 'const', but get rid of
the warnings spill now by changing it.
https://bugzilla.gnome.org/show_bug.cgi?id=785084
When set to fill, the label will always end up left-aligned, which
is only correct in LTR locales. Set the alignment explicitly to
work in both RTL and LTR locales.
https://bugzilla.gnome.org/show_bug.cgi?id=712638
These cause annoying allocation cycle warnings, and it's simpler to
just express our desired layout in terms of nested containers.
Adapt the theme to match as well.
https://bugzilla.gnome.org/show_bug.cgi?id=706843
This commit introduces a new BeginRequestType enum which gets
passed to the 'reset' signal to specify whether
a username should be provided to the begin() method and changes
the loginDialog to comply.
Currently, the signal only ever gets emitted with
AuthPrompt.BeginRequestType.PROVIDE_USERNAME
but that will change in the future when providing smartcard
support.
https://bugzilla.gnome.org/show_bug.cgi?id=683437
We currently emit "failed" any time the UserVerifier is reset,
and user verification didn't succeed prior.
A more conceptually clear time to emit "failed" would be if
the UserVerifier is reset and user verification failed prior,
and to emit "failed" if the user cancels unlock.
This commit restructures things to do that. Aside from being
more conceptually clear, it also lays the groundwork for us
to be able to reset the unlock screen without failing.
https://bugzilla.gnome.org/show_bug.cgi?id=683437
There's quite a bit of duplicated code between the login dialog
and the unlock dialog dealing with the various signals from the
ShellUserVerifier.
This commit moves that duplicated code into the AuthPrompt.
https://bugzilla.gnome.org/show_bug.cgi?id=704707
commit ea02380c15 made the login
screen stop using ModalDialog. It makes sense for the unlock
code to also stop using ModalDialog, too (for similar reasons).
Now that the login screen's auth prompt code has been separated
out, the unlock dialog can use it to get the buttons and spinners
etc, that it was previously getting from ModalDialog.
This commit drops the ModalDialog usage in the unlock dialog, and
makes the unlock dialog use GdmUtil.AuthPrompt instead.
https://bugzilla.gnome.org/show_bug.cgi?id=702308
Right now when a user types their password to unlock their session
we end up getting an unlock signal from GDM right away. We then
proceed to deactivate the screensaver before the user has a chance
to read his messages.
This commit makes sure we clear out the message queue before processing
the deactivation request.
https://bugzilla.gnome.org/show_bug.cgi?id=704347
logind sends out an "unlock" signal separately when
verification completes and we already listen for that,
so we don't need to unlock on verification-complete, too.
https://bugzilla.gnome.org/show_bug.cgi?id=704347
For classic mode, we want to use a different styling for the spinner,
so we will pick up the image filename from CSS to make use of mode
specific styling. As the CSS will give us a full pathname, adapt the
API to take a full pathname instead of building it inside AnimatedIcon
from the passed basename.
https://bugzilla.gnome.org/show_bug.cgi?id=693688
Right now, if multiple messages come in, they just sort of
clobber each other.
This commit sets up a message queue, and introduces pauses
long enough for the user to hopefully be able to read those
messages.
https://bugzilla.gnome.org/show_bug.cgi?id=694688
GDM sends a reset signal after verification succeeds
so that a user-switched login screen can prepare for
the next time it's going to be used.
The unlock screen treats resets as failures, though.
This means, on success, we're emitting "failed" and
clearing any last second messages.
This commit changes the unlock code to ignore resets from
GDM after successful verification.
https://bugzilla.gnome.org/show_bug.cgi?id=694688
Right, the common code between the login screen and
the unlock screen handles clearing the user verifier
when GDM sends a reset.
We don't actually always want to clear the messages on
reset in the unlock case, though, so doing it implicitly
is problematic.
This commit moves the clear() call from the common code
to the specific reset handlers.
https://bugzilla.gnome.org/show_bug.cgi?id=694688
With fallback mode dropped, we can no longer rely on gnome-screensaver
to be installed, so we'll have cases where we are unable to lock the
screen. The user menu should not show the "Lock" item in this case,
but as UnlockDialog includes UserMenu, we cannot use the existing check
without creating a circular dependency; move the function to a more
generic place to fix.
https://bugzilla.gnome.org/show_bug.cgi?id=693403
The user widget is the username and avatar shown on
the unlock dialog.
The login dialog has something very similar.
This commit separates the user widget out to its own
file, so we can use it from the login dialog in a
later commit.
https://bugzilla.gnome.org/show_bug.cgi?id=694062
The screensaver schema has a key that it is meant for locking down
the ability to switch user when the screen is locked, but support
for it was not implemented in the new screenshield.
Fix that by checking the key before creating the button.
https://bugzilla.gnome.org/show_bug.cgi?id=691042
Commit c3cab28 removed bits setting the password char that was used to
allow typing the password after a failure but before the first question
for the new attempt came.
Without that code, in complex PAM setups you can end up with a visible
password.
https://bugzilla.gnome.org/show_bug.cgi?id=687113
We need to do a better job of indicating login process. This can
sometimes take a few seconds (particularly if you get your password
wrong): we need to give better feedback of what's going on.
This adds a spinner next to the login button if the authorization takes
some time.
https://bugzilla.gnome.org/show_bug.cgi?id=687113
The login dialog had these issues:
- the entry was not really disabled, you could still edit text
- the sensitivity state was not reset on verification failure
- the session list was not disabled
The unlock dialog had these issues:
- "Login as another user..." was not insensitive
- redundant password char setting, overwriting the one given by the
question
The entry insensitive style was also wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=687113
The "Sign In" button of the login dialog has its look disabled when the
entry is empty, but it can still be triggered by the Enter key.
This fixes the modal dialog so it does not trigger the action of an
insensitive button, and also means we do not need to connect to the
"activate" signal of the entry anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=687113
As we now allow the ctrl-alt-tab popup on the lock screen, it should
be possible to navigate back from the top bar, so add the corresponding
elements to the switcher.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
For now we just use it to assign an identifier to modal modes in
which we want to allow some keybindings, but we don't use it for
any actual filtering; we'll start doing this shortly.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
