mutter/clutter/cogl/common/cogl.c
2009-07-28 12:13:43 +01:00

855 lines
22 KiB
C

/*
* Cogl
*
* An object oriented GL/GLES Abstraction/Utility Layer
*
* Copyright (C) 2007,2008,2009 Intel Corporation.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 02111-1307, USA.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "cogl.h"
#include <string.h>
#include <math.h>
#include <stdlib.h>
#ifdef HAVE_CLUTTER_GLX
#include <dlfcn.h>
#include <GL/glx.h>
typedef CoglFuncPtr (*GLXGetProcAddressProc) (const guint8 *procName);
#endif
#include "cogl-debug.h"
#include "cogl-internal.h"
#include "cogl-util.h"
#include "cogl-context.h"
#include "cogl-material-private.h"
#if defined (HAVE_COGL_GLES2) || defined (HAVE_COGL_GLES)
#include "cogl-gles2-wrapper.h"
#endif
#ifdef COGL_GL_DEBUG
/* GL error to string conversion */
static const struct {
GLuint error_code;
const gchar *error_string;
} gl_errors[] = {
{ GL_NO_ERROR, "No error" },
{ GL_INVALID_ENUM, "Invalid enumeration value" },
{ GL_INVALID_VALUE, "Invalid value" },
{ GL_INVALID_OPERATION, "Invalid operation" },
{ GL_STACK_OVERFLOW, "Stack overflow" },
{ GL_STACK_UNDERFLOW, "Stack underflow" },
{ GL_OUT_OF_MEMORY, "Out of memory" },
#ifdef GL_INVALID_FRAMEBUFFER_OPERATION_EXT
{ GL_INVALID_FRAMEBUFFER_OPERATION_EXT, "Invalid framebuffer operation" }
#endif
};
static const guint n_gl_errors = G_N_ELEMENTS (gl_errors);
const gchar *
cogl_gl_error_to_string (GLenum error_code)
{
gint i;
for (i = 0; i < n_gl_errors; i++)
{
if (gl_errors[i].error_code == error_code)
return gl_errors[i].error_string;
}
return "Unknown GL error";
}
#endif /* COGL_GL_DEBUG */
void
cogl_clear (const CoglColor *color, gulong buffers)
{
GLbitfield gl_buffers = 0;
COGL_NOTE (DRAW, "Clear begin");
cogl_clip_ensure ();
if (buffers & COGL_BUFFER_BIT_COLOR)
{
GE( glClearColor (cogl_color_get_red_float (color),
cogl_color_get_green_float (color),
cogl_color_get_blue_float (color),
0.0) );
gl_buffers |= GL_COLOR_BUFFER_BIT;
}
if (buffers & COGL_BUFFER_BIT_DEPTH)
gl_buffers |= GL_DEPTH_BUFFER_BIT;
if (buffers & COGL_BUFFER_BIT_STENCIL)
gl_buffers |= GL_STENCIL_BUFFER_BIT;
if (!gl_buffers)
{
static gboolean shown = FALSE;
if (!shown)
{
g_warning ("You should specify at least one auxiliary buffer "
"when calling cogl_clear");
}
return;
}
glClear (gl_buffers);
COGL_NOTE (DRAW, "Clear end");
}
static inline gboolean
cogl_toggle_flag (CoglContext *ctx,
gulong new_flags,
gulong flag,
GLenum gl_flag)
{
/* Toggles and caches a single enable flag on or off
* by comparing to current state
*/
if (new_flags & flag)
{
if (!(ctx->enable_flags & flag))
{
GE( glEnable (gl_flag) );
ctx->enable_flags |= flag;
return TRUE;
}
}
else if (ctx->enable_flags & flag)
{
GE( glDisable (gl_flag) );
ctx->enable_flags &= ~flag;
}
return FALSE;
}
static inline gboolean
cogl_toggle_client_flag (CoglContext *ctx,
gulong new_flags,
gulong flag,
GLenum gl_flag)
{
/* Toggles and caches a single client-side enable flag
* on or off by comparing to current state
*/
if (new_flags & flag)
{
if (!(ctx->enable_flags & flag))
{
GE( glEnableClientState (gl_flag) );
ctx->enable_flags |= flag;
return TRUE;
}
}
else if (ctx->enable_flags & flag)
{
GE( glDisableClientState (gl_flag) );
ctx->enable_flags &= ~flag;
}
return FALSE;
}
void
cogl_enable (gulong flags)
{
/* This function essentially caches glEnable state() in the
* hope of lessening number GL traffic.
*/
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl_toggle_flag (ctx, flags,
COGL_ENABLE_BLEND,
GL_BLEND);
cogl_toggle_flag (ctx, flags,
COGL_ENABLE_BACKFACE_CULLING,
GL_CULL_FACE);
cogl_toggle_client_flag (ctx, flags,
COGL_ENABLE_VERTEX_ARRAY,
GL_VERTEX_ARRAY);
cogl_toggle_client_flag (ctx, flags,
COGL_ENABLE_COLOR_ARRAY,
GL_COLOR_ARRAY);
}
gulong
cogl_get_enable ()
{
_COGL_GET_CONTEXT (ctx, 0);
return ctx->enable_flags;
}
void
cogl_set_depth_test_enabled (gboolean setting)
{
/* Currently the journal can't track changes to depth state... */
_cogl_journal_flush ();
if (setting)
{
glEnable (GL_DEPTH_TEST);
glDepthFunc (GL_LEQUAL);
}
else
glDisable (GL_DEPTH_TEST);
}
gboolean
cogl_get_depth_test_enabled (void)
{
return glIsEnabled (GL_DEPTH_TEST) == GL_TRUE ? TRUE : FALSE;
}
void
cogl_set_backface_culling_enabled (gboolean setting)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
/* Currently the journal can't track changes to backface culling state... */
_cogl_journal_flush ();
ctx->enable_backface_culling = setting;
}
gboolean
cogl_get_backface_culling_enabled (void)
{
_COGL_GET_CONTEXT (ctx, FALSE);
return ctx->enable_backface_culling;
}
void
cogl_set_source_color (const CoglColor *color)
{
CoglColor premultiplied;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
/* In case cogl_set_source_texture was previously used... */
cogl_material_remove_layer (ctx->default_material, 0);
premultiplied = *color;
cogl_color_premultiply (&premultiplied);
cogl_material_set_color (ctx->default_material, &premultiplied);
cogl_set_source (ctx->default_material);
}
static void
project_vertex (const CoglMatrix *modelview_matrix,
const CoglMatrix *projection_matrix,
float *vertex)
{
int i;
/* Apply the modelview matrix */
cogl_matrix_transform_point (modelview_matrix,
&vertex[0], &vertex[1],
&vertex[2], &vertex[3]);
/* Apply the projection matrix */
cogl_matrix_transform_point (projection_matrix,
&vertex[0], &vertex[1],
&vertex[2], &vertex[3]);
/* Convert from homogenized coordinates */
for (i = 0; i < 4; i++)
vertex[i] /= vertex[3];
}
static void
set_clip_plane (GLint plane_num,
const float *vertex_a,
const float *vertex_b)
{
#if defined (HAVE_COGL_GLES2) || defined (HAVE_COGL_GLES)
GLfloat plane[4];
#else
GLdouble plane[4];
#endif
GLfloat angle;
CoglMatrix inverse_projection;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
/* Calculate the angle between the axes and the line crossing the
two points */
angle = atan2f (vertex_b[1] - vertex_a[1],
vertex_b[0] - vertex_a[0]) * (180.0/G_PI);
_cogl_current_matrix_push ();
/* Load the identity matrix and multiply by the reverse of the
projection matrix so we can specify the plane in screen
coordinates */
_cogl_current_matrix_identity ();
cogl_matrix_init_from_array (&inverse_projection,
ctx->inverse_projection);
_cogl_current_matrix_multiply (&inverse_projection);
/* Rotate about point a */
_cogl_current_matrix_translate (vertex_a[0], vertex_a[1], vertex_a[2]);
/* Rotate the plane by the calculated angle so that it will connect
the two points */
_cogl_current_matrix_rotate (angle, 0.0f, 0.0f, 1.0f);
_cogl_current_matrix_translate (-vertex_a[0], -vertex_a[1], -vertex_a[2]);
_cogl_flush_matrix_stacks ();
plane[0] = 0;
plane[1] = -1.0;
plane[2] = 0;
plane[3] = vertex_a[1];
#if defined (HAVE_COGL_GLES2) || defined (HAVE_COGL_GLES)
GE( glClipPlanef (plane_num, plane) );
#else
GE( glClipPlane (plane_num, plane) );
#endif
_cogl_current_matrix_pop ();
}
void
_cogl_set_clip_planes (float x_offset,
float y_offset,
float width,
float height)
{
CoglMatrix modelview_matrix;
CoglMatrix projection_matrix;
float vertex_tl[4] = { x_offset, y_offset, 0, 1.0 };
float vertex_tr[4] = { x_offset + width, y_offset, 0, 1.0 };
float vertex_bl[4] = { x_offset, y_offset + height, 0, 1.0 };
float vertex_br[4] = { x_offset + width, y_offset + height,
0, 1.0 };
_cogl_get_matrix (COGL_MATRIX_PROJECTION,
&projection_matrix);
_cogl_get_matrix (COGL_MATRIX_MODELVIEW,
&modelview_matrix);
project_vertex (&modelview_matrix, &projection_matrix, vertex_tl);
project_vertex (&modelview_matrix, &projection_matrix, vertex_tr);
project_vertex (&modelview_matrix, &projection_matrix, vertex_bl);
project_vertex (&modelview_matrix, &projection_matrix, vertex_br);
/* If the order of the top and bottom lines is different from the
order of the left and right lines then the clip rect must have
been transformed so that the back is visible. We therefore need
to swap one pair of vertices otherwise all of the planes will be
the wrong way around */
if ((vertex_tl[0] < vertex_tr[0] ? 1 : 0)
!= (vertex_bl[1] < vertex_tl[1] ? 1 : 0))
{
float temp[4];
memcpy (temp, vertex_tl, sizeof (temp));
memcpy (vertex_tl, vertex_tr, sizeof (temp));
memcpy (vertex_tr, temp, sizeof (temp));
memcpy (temp, vertex_bl, sizeof (temp));
memcpy (vertex_bl, vertex_br, sizeof (temp));
memcpy (vertex_br, temp, sizeof (temp));
}
set_clip_plane (GL_CLIP_PLANE0, vertex_tl, vertex_tr);
set_clip_plane (GL_CLIP_PLANE1, vertex_tr, vertex_br);
set_clip_plane (GL_CLIP_PLANE2, vertex_br, vertex_bl);
set_clip_plane (GL_CLIP_PLANE3, vertex_bl, vertex_tl);
}
void
_cogl_add_stencil_clip (float x_offset,
float y_offset,
float width,
float height,
gboolean first)
{
CoglHandle current_source;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
_cogl_journal_flush ();
/* temporarily swap in our special stenciling material */
current_source = cogl_handle_ref (ctx->source_material);
cogl_set_source (ctx->stencil_material);
if (first)
{
GE( glEnable (GL_STENCIL_TEST) );
/* Initially disallow everything */
GE( glClearStencil (0) );
GE( glClear (GL_STENCIL_BUFFER_BIT) );
/* Punch out a hole to allow the rectangle */
GE( glStencilFunc (GL_NEVER, 0x1, 0x1) );
GE( glStencilOp (GL_REPLACE, GL_REPLACE, GL_REPLACE) );
cogl_rectangle (x_offset, y_offset,
x_offset + width, y_offset + height);
}
else
{
/* Add one to every pixel of the stencil buffer in the
rectangle */
GE( glStencilFunc (GL_NEVER, 0x1, 0x3) );
GE( glStencilOp (GL_INCR, GL_INCR, GL_INCR) );
cogl_rectangle (x_offset, y_offset,
x_offset + width, y_offset + height);
/* Subtract one from all pixels in the stencil buffer so that
only pixels where both the original stencil buffer and the
rectangle are set will be valid */
GE( glStencilOp (GL_DECR, GL_DECR, GL_DECR) );
_cogl_set_current_matrix (COGL_MATRIX_PROJECTION);
_cogl_current_matrix_push ();
_cogl_current_matrix_identity ();
/* Cogl generally assumes the modelview matrix is current, so since
* cogl_rectangle will be flushing GL state and emitting geometry
* to OpenGL it will be confused if we leave the projection matrix
* active... */
_cogl_set_current_matrix (COGL_MATRIX_MODELVIEW);
_cogl_current_matrix_push ();
_cogl_current_matrix_identity ();
cogl_rectangle (-1.0, -1.0, 1.0, 1.0);
_cogl_current_matrix_pop ();
_cogl_set_current_matrix (COGL_MATRIX_PROJECTION);
_cogl_current_matrix_pop ();
_cogl_set_current_matrix (COGL_MATRIX_MODELVIEW);
}
/* make sure our rectangles hit the stencil buffer before we restore
* the stencil function / operation */
_cogl_journal_flush ();
/* Restore the stencil mode */
GE( glStencilFunc (GL_EQUAL, 0x1, 0x1) );
GE( glStencilOp (GL_KEEP, GL_KEEP, GL_KEEP) );
/* restore the original source material */
cogl_set_source (current_source);
cogl_handle_unref (current_source);
}
void
_cogl_disable_stencil_buffer (void)
{
GE( glDisable (GL_STENCIL_TEST) );
}
void
_cogl_enable_clip_planes (void)
{
GE( glEnable (GL_CLIP_PLANE0) );
GE( glEnable (GL_CLIP_PLANE1) );
GE( glEnable (GL_CLIP_PLANE2) );
GE( glEnable (GL_CLIP_PLANE3) );
}
void
_cogl_disable_clip_planes (void)
{
GE( glDisable (GL_CLIP_PLANE3) );
GE( glDisable (GL_CLIP_PLANE2) );
GE( glDisable (GL_CLIP_PLANE1) );
GE( glDisable (GL_CLIP_PLANE0) );
}
/* XXX: This should be deprecated and Cogl should be left to manage
* the glViewport automatically when switching draw buffers. */
void
cogl_viewport (guint width,
guint height)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
COGL_NOTE (MISC, "glViewport(0, 0, %u, %u)", width, height);
GE( glViewport (0, 0, width, height) );
ctx->viewport_width = width;
ctx->viewport_height = height;
}
void
_cogl_setup_viewport (guint width,
guint height,
float fovy,
float aspect,
float z_near,
float z_far)
{
float z_camera;
CoglMatrix projection_matrix;
cogl_viewport (width, height);
/* For Ortho projection.
* _cogl_current_matrix_ortho (0, width, 0, height, -1, 1);
*/
cogl_perspective (fovy, aspect, z_near, z_far);
/*
* In theory, we can compute the camera distance from screen as:
*
* 0.5 * tan (FOV)
*
* However, it's better to compute the z_camera from our projection
* matrix so that we get a 1:1 mapping at the screen distance. Consider
* the upper-left corner of the screen. It has object coordinates
* (0,0,0), so by the transform below, ends up with eye coordinate
*
* x_eye = x_object / width - 0.5 = - 0.5
* y_eye = (height - y_object) / width - 0.5 = 0.5
* z_eye = z_object / width - z_camera = - z_camera
*
* From cogl_perspective(), we know that the projection matrix has
* the form:
*
* (x, 0, 0, 0)
* (0, y, 0, 0)
* (0, 0, c, d)
* (0, 0, -1, 0)
*
* Applied to the above, we get clip coordinates of
*
* x_clip = x * (- 0.5)
* y_clip = y * 0.5
* w_clip = - 1 * (- z_camera) = z_camera
*
* Dividing through by w to get normalized device coordinates, we
* have, x_nd = x * 0.5 / z_camera, y_nd = - y * 0.5 / z_camera.
* The upper left corner of the screen has normalized device coordinates,
* (-1, 1), so to have the correct 1:1 mapping, we have to have:
*
* z_camera = 0.5 * x = 0.5 * y
*
* If x != y, then we have a non-uniform aspect ration, and a 1:1 mapping
* doesn't make sense.
*/
cogl_get_projection_matrix (&projection_matrix);
z_camera = 0.5 * projection_matrix.xx;
_cogl_set_current_matrix (COGL_MATRIX_MODELVIEW);
_cogl_current_matrix_identity ();
_cogl_current_matrix_translate (-0.5f, -0.5f, -z_camera);
_cogl_current_matrix_scale (1.0f / width, -1.0f / height, 1.0f / width);
_cogl_current_matrix_translate (0.0f, -1.0 * height, 0.0f);
}
CoglFeatureFlags
cogl_get_features (void)
{
_COGL_GET_CONTEXT (ctx, 0);
if (!ctx->features_cached)
_cogl_features_init ();
if (cogl_debug_flags & COGL_DEBUG_DISABLE_VBOS)
ctx->feature_flags &= ~COGL_FEATURE_VBOS;
return ctx->feature_flags;
}
gboolean
cogl_features_available (CoglFeatureFlags features)
{
_COGL_GET_CONTEXT (ctx, 0);
if (!ctx->features_cached)
_cogl_features_init ();
return (ctx->feature_flags & features) == features;
}
/* XXX: This function should be deprecated, and replaced with a
* cogl_draw_buffer_get_size() API instead. We don't support offset
* viewports, and you can't have floating point viewport sizes. */
void
cogl_get_viewport (float v[4])
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
v[0] = 0;
v[1] = 0;
v[2] = ctx->viewport_width;
v[3] = ctx->viewport_height;
}
void
cogl_get_bitmasks (gint *red,
gint *green,
gint *blue,
gint *alpha)
{
GLint value;
if (red)
{
GE( glGetIntegerv(GL_RED_BITS, &value) );
*red = value;
}
if (green)
{
GE( glGetIntegerv(GL_GREEN_BITS, &value) );
*green = value;
}
if (blue)
{
GE( glGetIntegerv(GL_BLUE_BITS, &value) );
*blue = value;
}
if (alpha)
{
GE( glGetIntegerv(GL_ALPHA_BITS, &value ) );
*alpha = value;
}
}
void
cogl_set_fog (const CoglColor *fog_color,
CoglFogMode mode,
float density,
float z_near,
float z_far)
{
GLfloat fogColor[4];
GLenum gl_mode = GL_LINEAR;
/* The cogl journal doesn't currently track fog state changes */
_cogl_journal_flush ();
fogColor[0] = cogl_color_get_red_float (fog_color);
fogColor[1] = cogl_color_get_green_float (fog_color);
fogColor[2] = cogl_color_get_blue_float (fog_color);
fogColor[3] = cogl_color_get_alpha_float (fog_color);
glEnable (GL_FOG);
glFogfv (GL_FOG_COLOR, fogColor);
#if HAVE_COGL_GLES
switch (mode)
{
case COGL_FOG_MODE_LINEAR:
gl_mode = GL_LINEAR;
break;
case COGL_FOG_MODE_EXPONENTIAL:
gl_mode = GL_EXP;
break;
case COGL_FOG_MODE_EXPONENTIAL_SQUARED:
gl_mode = GL_EXP2;
break;
}
#endif
/* TODO: support other modes for GLES2 */
/* NB: GLES doesn't have glFogi */
glFogf (GL_FOG_MODE, gl_mode);
glHint (GL_FOG_HINT, GL_NICEST);
glFogf (GL_FOG_DENSITY, (GLfloat) density);
glFogf (GL_FOG_START, (GLfloat) z_near);
glFogf (GL_FOG_END, (GLfloat) z_far);
}
void
cogl_disable_fog (void)
{
/* Currently the journal can't track changes to fog state... */
_cogl_journal_flush ();
glDisable (GL_FOG);
}
#if 0
void
cogl_flush_gl_state (int flags)
{
_cogl_flush_matrix_stacks ();
}
#endif
void
cogl_flush (void)
{
_cogl_journal_flush ();
}
void
cogl_read_pixels (int x,
int y,
int width,
int height,
CoglReadPixelsFlags source,
CoglPixelFormat format,
guint8 *pixels)
{
GLint viewport[4];
GLint viewport_height;
int rowstride = width * 4;
guint8 *temprow;
g_return_if_fail (format == COGL_PIXEL_FORMAT_RGBA_8888);
g_return_if_fail (source == COGL_READ_PIXELS_COLOR_BUFFER);
temprow = g_alloca (rowstride * sizeof (guint8));
glGetIntegerv (GL_VIEWPORT, viewport);
viewport_height = viewport[3];
/* The y co-ordinate should be given in OpenGL's coordinate system
so 0 is the bottom row */
y = viewport_height - y - height;
/* Setup the pixel store parameters that may have been changed by
Cogl */
glPixelStorei (GL_PACK_ALIGNMENT, 4);
#ifdef HAVE_COGL_GL
glPixelStorei (GL_PACK_ROW_LENGTH, 0);
glPixelStorei (GL_PACK_SKIP_PIXELS, 0);
glPixelStorei (GL_PACK_SKIP_ROWS, 0);
#endif /* HAVE_COGL_GL */
/* make sure any batched primitives get emitted to the GL driver before
* issuing our read pixels... */
cogl_flush ();
glReadPixels (x, y, width, height, GL_RGBA, GL_UNSIGNED_BYTE, pixels);
/* TODO: consider using the GL_MESA_pack_invert extension in the future
* to avoid this flip... */
/* vertically flip the buffer in-place */
for (y = 0; y < height / 2; y++)
{
if (y != height - y - 1) /* skip center row */
{
memcpy (temprow,
pixels + y * rowstride, rowstride);
memcpy (pixels + y * rowstride,
pixels + (height - y - 1) * rowstride, rowstride);
memcpy (pixels + (height - y - 1) * rowstride,
temprow,
rowstride);
}
}
}
void
cogl_begin_gl (void)
{
CoglMaterialFlushOptions options;
gulong enable_flags;
int i;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
if (ctx->in_begin_gl_block)
{
static gboolean shown = FALSE;
if (!shown)
g_warning ("You should not nest cogl_begin_gl/cogl_end_gl blocks");
shown = TRUE;
return;
}
ctx->in_begin_gl_block = TRUE;
/* Flush all batched primitives */
cogl_flush ();
/* Flush our clipping state to GL */
cogl_clip_ensure ();
/* Flush any client side matrix state */
_cogl_flush_matrix_stacks ();
/* Setup the state for the current material */
/* We considered flushing a specific, minimal material here to try and
* simplify the GL state, but decided to avoid special cases and second
* guessing what would be actually helpful.
*
* A user should instead call cogl_set_source_color4ub() before
* cogl_begin_gl() to simplify the state flushed.
*/
options.flags = 0;
_cogl_material_flush_gl_state (ctx->source_material, &options);
/* FIXME: This api is a bit yukky, ideally it will be removed if we
* re-work the cogl_enable mechanism */
enable_flags |= _cogl_material_get_cogl_enable_flags (ctx->source_material);
if (ctx->enable_backface_culling)
enable_flags |= COGL_ENABLE_BACKFACE_CULLING;
cogl_enable (enable_flags);
/* Disable all client texture coordinate arrays */
for (i = 0; i < ctx->n_texcoord_arrays_enabled; i++)
{
GE (glClientActiveTexture (GL_TEXTURE0 + i));
GE (glDisableClientState (GL_TEXTURE_COORD_ARRAY));
}
ctx->n_texcoord_arrays_enabled = 0;
}
void
cogl_end_gl (void)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
if (!ctx->in_begin_gl_block)
{
static gboolean shown = FALSE;
if (!shown)
g_warning ("cogl_end_gl is being called before cogl_begin_gl");
shown = TRUE;
return;
}
ctx->in_begin_gl_block = FALSE;
}