In different places we checked the grab op differently when determing
whether we are using _NET_WM_SYNC_REQUEST. This was somewhat covered
up previously by the fact that we only had a sync alarm when using
_NET_WM_SYNC_REQUEST, but that is no longer the case, so consistently
use meta_grab_op_is_resizing() everywhere.
When a client is drawing as hard as possible (without sleeping
between frames) we need to draw as soon possible, since sleeping
will decrease the effective frame rate shown to the user, and
can also result in the system never kicking out of power-saving
mode because it doesn't look fully utilized.
Use the amount the client increments the counter value by when
ending the frame to distinguish these cases:
- Increment by 1: a no-delay frame
- Increment by more than 1: a non-urgent frame, handle normally
https://bugzilla.gnome.org/show_bug.cgi?id=685463
We previously had timestamp information stubbed out in
_NET_WM_FRAME_DRAWN. Instead of this, add a high-resolution timestamp
in _NET_WM_FRAME_DRAWN then send a _NET_WM_FRAME_TIMINGS message
after when we have complete frame timing information, representing
the "presentation time" of the frame as an offset from the timestamp
in _NET_WM_FRAME_DRAWN.
To provide maximum space in the messages,_NET_WM_FRAME_DRAWN and
_NET_WM_FRAME_TIMINGS are not done as WM_PROTOCOLS messages but
have their own message types.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Add a function to convert from g_get_monotonic_time() to a
"high-resolution server timestamp" with microsecond precision.
These timestamps will be used when communicating frame timing
information to the client.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Use XSyncSetPriority() to prioritize the compositor above applications
for X server priority. In practice, this makes little difference because
the Xorg "smart scheduler" will schedule in a single application for
time slices that exceed the frame drawing time, but it's theoretically
right and might make a difference if the X server scheduler is improved.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Using a "sync delay" where we wait for 2 ms after the vblank before
starting to draw the next frame provides for much more predictable
latency for applications. An application can know that if it completes
a frame any time between 8ms before the vblank to the vblank,
it will reliably be drawn on the following vblank period, rather than
having an unpredictable latency depending on whether the compositor
is currently busy drawing a frame or not.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Instead of defining CLUTTER_ENABLE_EXPERIMENTAL_API and
COGL_ENABLE_EXPERIMENTAL_API in individual source files, enable
them on the command line. We weren't tracking exactly what pieces of
experimental API we were using and we were using the experimental
API in most source files that used Clutter and Cogl, so the
local #defines were annoying rather than useful.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
It's possible that a client might update the (extended)
_NET_WM_SYNC_REQUEST_COUNTER counter twice without actually drawing
anything. In that case, we still should send a _NET_WM_FRAME_DRAWN
message since it's hard for a client to know every case in which
no damage is generated. For now, do it the easy way by forcing a
stage repaint.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Resizing the frame triggers creation of a new backing pixmap for the
window, so we should do that first before we resize the client window
and mess up the contents of the old backing pixmap.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
When the application provides the extended second counter for
_NET_WM_SYNC_REQUEST, send a client message with completion
information after the next redraw after each counter update
by the application.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
If an application provides two values in _NET_WM_SYNC_REQUEST_COUNTER,
use that as a signal that the applications wants an extended behavior
where it can update the counter as well as the window manager. If the
application updates the counter to an odd value, updates of the
window are frozen until the counter is updated again to an even value.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Instead of creating a new alarm each time we resize a window
interactively, create an alarm the first time we resize a window
and keep it around permanently until we unmanage the window.
Doing it this way will be useful when we allow the application to
spontaneously generate sync request updates to indicate
frames it is drawing.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Replace the unused meta_compositor_set_updates() with
a reversed-meaning meta_compositor_set_updates_frozen(), and use
it to implement freezing application window updates during
interactive resizing. This avoids drawing new areas of the window
with blank content before the application has a chance to repaint.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
We have some code in gnome-shell that does the equivalent of:
window.get_workspace() == workspace || window.is_on_all_workspaces();
which is a bit unwieldy. We already have a method in mutter,
so use that and document it.
https://bugzilla.gnome.org/show_bug.cgi?id=691744
With some recent changes to how mask textures are constructed from
shapes, a helper method we made was only called in one place, allowing
us to drop a reference/destroy, and remove a double clear.
https://bugzilla.gnome.org/show_bug.cgi?id=679901
Due to a conditional error, meta_region_builder_add_rectangle was called
on every single blank pixel, rather than at the end of spans. With the new
rename, it's fairly clear to see the error. Fix the check to ensure that
we no longer make extraneous calls to meta_region_builder_add_rectangle.
https://bugzilla.gnome.org/show_bug.cgi?id=691874
GtkWindow added the BACKGROUND style class to all windows, which the
CSS file selects on to set a background color for all windows. Without
this, the background color becomes undefined, and thus window frames
look like they have "glitchy" graphics.
https://bugzilla.gnome.org/show_bug.cgi?id=690317
The minimize action does not make much sense without a window list,
which is why its default keybinding was removed in bug 643609;
getting the focused window out of the way quickly can still be useful
though, so change the description to "Hide window" instead, which does
not imply a window list. We will then assign a default shortcut again.
https://bugzilla.gnome.org/show_bug.cgi?id=682887
MetaButtonLayout is extremely unfriendly for introspection: its fields
are arrays of a fixed length, but the actual length is determined by
a custom stop value (e.g. not NULL / 0).
Without API changes this will never work nicely in introspection, but
we can at least make it work; start by filling up unused fields with
the stop value rather than leaving it at random values.
https://bugzilla.gnome.org/show_bug.cgi?id=689263
The style context of the widget is rarely what we want. We won't
fix this to be a MetaFrames style context yet; this just changes
the internal API.
https://bugzilla.gnome.org/show_bug.cgi?id=690317
Currently, we ping windows only when attempting to delete them, but
if the application is not responding, we want to show the dialog
as soon as possible. Given that we cannot be passively notified that
the window stopped responding with the current X11 protocol, a good
workaround is to ping the window when activating it.
If the window stops responding while active, it is expected the user
will try to switch window or open the overview, and when coming back
he'll get the failure dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=684340
Add meta_window_check_alive(), which is a simple wrapper over
meta_display_ping_window(), and takes care of showing the "Application
is not responding dialog" if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=684340
We want to maintain the invariant that an attached modal dialog is always
of type MODAL_DIALOG, so recompute is_attached_dialog() when the window
type changes.
https://bugzilla.gnome.org/show_bug.cgi?id=690454
This removes our final dependency on Core Events, meaning
we can remove support code for them soon.
This commit is a bit ugly as it requires ui having a dependency on
core, but this is already a hack, so this is thus a hack inside a
hack, and two hacks make a right or however that goes.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
In random places that are not grabs, we selected for events on
things like the root window, stage window, COW and more. Switch
these over to using the proper XI2 APIs.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
As calling XIGrabDevice multiple times will change it, just
drop the XChangeActivePointerGrab path and just go down the
XIGrabPointer path always.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
It's unlikely that we'll ever want to support multiple pointer
devices. Multiple keyboard devices may become useful in the future,
but for now, only care about the core keyboard.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
Mechanically transform the event processing of mutter to care
about XI2 events instead of Core Events. Core Events will be left
in the dust soon, and removed entirely.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
In order to make the XI2 handling easier on us in the future, we now
split input events from non-input events. This will allow one code path
to use XIEvent, and the other to use XEvent in the future. This commit
has involved plenty of indenting changes, so it's better seen with
git diff -b or &ignorews=1
https://bugzilla.gnome.org/show_bug.cgi?id=688779
Since we want nice alt-tab applications for gnome-shell, we should up the
limit to 96. In the future, we probably want to get rid of the icon-cache,
and allow looking up a correctly sized icon directly from the window.
To prevent app breakage, set the legacy WM_HINTS pixmap size directly to
32x32.
https://bugzilla.gnome.org/show_bug.cgi?id=689651
Add an additional "switcher" keybinding for switching between
applications rather than windows (like the existing 'switch-windows'
and 'switch-group' bindings).
The purpose of the new keybinding is to be taken over by gnome-shell's
application-based alt-tab popup, so rather than actually implementing
an application switcher in mutter, let it duplicate the normal window
switcher when run standalone.
https://bugzilla.gnome.org/show_bug.cgi?id=688913
Currently meta_display_get_tab_list() will only return windows on
a single workspace. Make the workspace parameter optional to allow
requesting windows from all workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=688913
The window positioning is delayed in idle_move_resize() in case the application
resizes/maximizes its window quickly after its creation. The delayed
positioning uses window->user_rect because of bug 426519 comment 3 (see
meta_window_move_resize_now()).
user_rect was not set in the initial positioning, causing the delayed
positioning unable to know which monitor we use for this window. As a
consequence, the window could jump spontaneously from one monitor to another.
With this patch, the window does not jump anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=556696
As the overlay key works differently from normal keybindings, it
requires special treatment. However, by adding a rudimentary
MetaKeyBinding for it, we will be able to confine the special
handling to mutter and treat it like any other keybinding in
the shell.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
Currently keybindings are blocked while the compositor holds a grab; if
we want a keybinding to be available anyway, we use captured ClutterEvents
to determine the KeyBindingAction the event would have triggered and
run our own handlers (ugh).
Instead, provide a hook to allow the compositor to filter out keybindings
before processing them normally, regardless of whether the compositor
holds a grab or not.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
Since GTK+ commit b1ad5c8abc2c, GtkSetting's CSS provider uses a
priority of GTK_STYLE_PROVIDER_PRIORITY_SETTINGS, which means it
will overwrite the ones we create ourselves.
Bump the priority to fix dark window decorations.
https://bugzilla.gnome.org/show_bug.cgi?id=688182
The X server sends a XkbNewKeyboardNotify event for each keyboard
device when a new keyboard description is loaded. These days a typical
computer has several keyboard devices, e.g. xinput on this laptop
lists 8. Since the work we do on these events is relatively expensive
and we are only really interested in changes to the virtual core
keyboard we can skip other devices' events to cut on needless work.
https://bugzilla.gnome.org/show_bug.cgi?id=674859
Using ClutterEffect is not pratical on MetaBackgroundActor, as the FBO
redirection has a noticeable performance impact. Instead, allow adding
GLSL code directly to the pipeline used to draw the background texture.
At the same time, port MetaBackgroundActor to modern Cogl API.
https://bugzilla.gnome.org/show_bug.cgi?id=669798
When support for multiple plugins was removed, the logic that was
supposed to send events to Clutter directly *only if there is no filter
function from a plugin* was broken, so events were being sent to
Clutter twice if Clutter didn't consume them the first time.
https://bugzilla.gnome.org/show_bug.cgi?id=686406
When using the show-desktop shortcut with no desktop window, unshowing
will focus the second-most-recently-used window. If we find a desktop
window, it will be focused explicitly and everything works as expected;
however without a desktop window, we end up hiding the focus window,
which will use focus_default_window() with the not_this_one parameter
to move focus away. We used to get away with this, as the not_this_one
parameter was ignored until commit e257580b94, now with bug 675982
fixed, we need to explicitly handle the show-desktop case.
https://bugzilla.gnome.org/show_bug.cgi?id=686928
On startup, workspaces are initialized according to the num-workspaces
preference. However when using dynamic workspaces, the actual number
of workspaces in use might be greater than the preference (when
replacing the window manager), forcing windows on those workspaces
to the first workspace.
To fix, ignore the preference completely when using dynamic workspaces
and try to restore the previous number of workspaces (as read from
_NET_NUMBER_OF_DESKTOPS).
https://bugzilla.gnome.org/show_bug.cgi?id=685439
Fixes bug #670396. Without this fix the guard window may not
extend over the whole area of the screen after a XRandR
reconfiguration. The effect being that mouse events are
delivered to invisible windows.
Moving focus immediately on crossing events as we currently do
in focus-follows-mouse mode may trigger a lot of unwanted focus
changes when moving over unrelated windows on the way to a target.
Those accidental focus changes prevent features like GNOME Shell's
application menu from working properly and are visually expensive
since we now use a very distinct style for unfocused windows.
Instead, delay the actual focus change until the pointer has stopped
moving.
https://bugzilla.gnome.org/show_bug.cgi?id=678169
Add a type annotation on the xevent_filter vfunc. This is sufficient
to remove the skip annotation on MetaPlugin and MetaPluginClass
without triggering scan errors.
https://bugzilla.gnome.org/show_bug.cgi?id=671098
If someone plugs in a new monitor, while all their regular windows
should move in absolute X coordinates to ensure they stay on the
same monitor, the desktop window should stay put.
https://bugzilla.gnome.org/show_bug.cgi?id=681159
Simplify the set of window-property functions to remove the
unused functions:
meta_window_reload_properties_from_xwindow()
meta_window_reload_properties()
And to make:
meta_window_reload_property()
static. The code is considerably simplified by removing the
plural variants.
https://bugzilla.gnome.org/show_bug.cgi?id=587255
Plenty of ugly here, but it works; revert when the zenity version
we depend on stops being bleeding-edge (or we can assume a zenity
version that does not error out on unknown options).
https://bugzilla.gnome.org/show_bug.cgi?id=684306
Quotes should definitively part of the translation, but we are in
string freeze now - revert this when we get a string freeze approval
or after the freeze ends.
https://bugzilla.gnome.org/show_bug.cgi?id=684306
As plugins can now define their own keyboard shortcuts via
meta_display_add_keybinding(), it makes sense for them to
expose those shortcuts to System Settings, so add some API
to set the properties gnome-control-center uses to pick up
wm keybinding settings.
https://bugzilla.gnome.org/show_bug.cgi?id=671010
meta_window_group_paint tries to carefully figure out which parts of the
scene it can avoid painting. One area it avoids painting is the region of
the screen occupied by an unredirected window (if there's one present).
When subtracting from the visible region, it gets the coordinate spaces
confused, and ends up subtracting the area at the wrong offset. Fix this
by translating the rectangle subtracted from the visible region.
https://bugzilla.gnome.org/show_bug.cgi?id=677116
When changing the overlay-key setting, the change only takes effect
on restart - there are actually two bugs involved:
(1) the test whether the key has changed is located in the
else part of a test for string settings (and overlay-key happens
to be a string settings ...)
(2) with (1) fixed, a change signal is emitted, which triggers a
reload of all keybindings - unfortunately, the actual value
of overlay-key is only read on startup, so the key is reloaded
using the old value
Fix both issues by replacing the custom handling of the overlay-key
with the regular handling of string preferences.
https://bugzilla.gnome.org/show_bug.cgi?id=681906
Instead of getting the x/y of the MetaBackgroundActor with respect to the
parent, use the same logic that we do for windows, fixing the case
where there is a more complex transformation involved.
https://bugzilla.gnome.org/show_bug.cgi?id=681221
Currently when the window group is moved, the visible region set
on the background actor no longer matches the actually visible
region, resulting in flickering around window actors.
Fix by translating the visible region with the window group.
https://bugzilla.gnome.org/show_bug.cgi?id=681221
When we consider tiling a special case of maximization, it makes
more sense to always unmaximize to the normal state rather than
restoring a previous tile state.
https://bugzilla.gnome.org/show_bug.cgi?id=677565
Currently we decide whether a modal dialog should be attached or not
when mapping it, i.e. we don't pick up preference changes that happen
while the dialog is up. It's not really a big deal given that modal
dialogs are usually transitory, but it's easy enough to add a bit of
extra polish ...
https://bugzilla.gnome.org/show_bug.cgi?id=679904
Side-by-side tiling is conceptually very close to maximization
("half-maximized"), so it makes sense to also hide the titlebar
in this state if requested by the application.
https://bugzilla.gnome.org/show_bug.cgi?id=679290
There was a potential case where we were trying to use uninitialized memory,
in the case where the X server threw an error during XShapeGetRectangles.
In this case, we need to use the implicit shape for the window, which means
we need to rearrange code flow to make it work.
https://bugzilla.gnome.org/show_bug.cgi?id=677977
fixes 4595209346
We're supposed to return an index from here now, no longer a pointer
to the current monitor.
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
Similar to meta_screen_get_primary_monitor, this returns a monitor index.
The monitor that the pointer is on. The previous private implementation
has been renamed to meta_screen_get_current_monitor_info.
https://bugzilla.gnome.org/show_bug.cgi?id=642591
If a window has its BoundingRegion shaped, we shouldn't unredirect it,
as it expects the rest of the windows from being shown under it. This
prevents applications like the Skype screen recorder or gtkRecordMyDesktop
which want to show a "border" around the recorded area from being
unredirected, giving the appearance of making the desktop freeze.
https://bugzilla.gnome.org/show_bug.cgi?id=677657
The "multiple plugins loaded at once" strategy was always a big fiction:
while it may be viable if you're super careful, it's fragile and requires
a bit of infrastructure that we would be better off without.
Note that for simplicity, we're keeping the MetaPluginManager, but it only
manages one plugin. A possible future cleanup would be to remove it entirely.
https://bugzilla.gnome.org/show_bug.cgi?id=676855
We already check that the plugin has the appropriate vfunc in the klass
structure, so we shouldn't need to check for the same data again with
a "features" long.
https://bugzilla.gnome.org/show_bug.cgi?id=676855
We may not show the backtrace, but it's prohibitly expensive to generate,
so don't. If someone wants a backtrace they can use the appropriate G_DEBUG
environment variable plus GDB.
https://bugzilla.gnome.org/show_bug.cgi?id=676855
It is impossible to switch to other windows when keep-on-top is set
for maximized windows; given that keep-on-top is only ever useful
to keep a window visible while focusing a different window, the
current behavior is pointless. So ignore keep-on-top while a window
is maximized.
https://bugzilla.gnome.org/show_bug.cgi?id=673581
This effectively makes MetaShapedTexture not a MetaShapedTexture, but a simple
and dumb MetaMaskedTexture, with an optimization for clipped regions.
We're doing this as the mask may need to be more complicated than made of
a cairo path -- we eventually want GTK+ to draw the entire frame background,
which we'll then scan.
https://bugzilla.gnome.org/show_bug.cgi?id=676052
As we want GTK+ to paint the mask on an A8, we can't simply use a cairo
path. A later commit will make this into a simple masked texture, and
meta-window-actor will be in control of the mask.
https://bugzilla.gnome.org/show_bug.cgi?id=676052
The concept of a clip region doesn't make sense now that we have anti-aliased
corners and a full alpha channel. Once the theme transition is complete,
creating a preview image with an alpha channel will be possible by passing
an ARGB surface to gtk_widget_draw(preview_widget, ...);
https://bugzilla.gnome.org/show_bug.cgi?id=676052
These queued redraws, which is a problem when we want to know exactly
what changed when we redraw, so we do minimal effort. We're eventually
going to replace the queue_redraw API with something a lot better, so
let's just get these out of the way now.
https://bugzilla.gnome.org/show_bug.cgi?id=676052
Since we now cache windows in the X server, we don't really need to cache
them here. Since we are redirecting windows in most cases, we're not gaining
anything except added memory usage. Additionally, remove the clip to screen
optimization - if a window is partially off-screen, we still need to draw
the entire thing as redirection means we won't get an expose event for it.
Additionally, when introducing invisible borders, something accidentally
slipped through: we were getting expose events on the invisible borders,
and they weren't in the cached pixels rect, so we were painting the theme
for them, even if we didn't actually paint anything with cairo. Make sure
to clip out the invisible borders instead of just the client rect so that
we don't draw if our expose event is on the invisible borders.
https://bugzilla.gnome.org/show_bug.cgi?id=675111
The EXPORT_PACKAGES variable to the GIR makefile should be the
packages needed to use this gir. It's also unnecessary to set PACKAGES
(which is just used for CFLAGS at scan-time) since CFLAGS is already
pulls in all necessary CFLAGS.
https://bugzilla.gnome.org/show_bug.cgi?id=671092
==31043== 7 bytes in 1 blocks are definitely lost in loss record 213 of 6,861
==31043== at 0x402B018: malloc (in /usr/lib/valgrind/vgpreload_memcheck-x86-linux.so)
==31043== by 0x417789A: ??? (in /usr/lib/libglib-2.0.so.0.3122.0)
==31043== by 0x4177C42: g_malloc (in /usr/lib/libglib-2.0.so.0.3122.0)
==31043== by 0x418DC3A: g_strdup (in /usr/lib/libglib-2.0.so.0.3122.0)
==31043== by 0x408C470: meta_display_open (display.c:475)
==31043== by 0x40A4D42: meta_run (main.c:552)
==31043== by 0x8048A74: main (mutter.c:96)
https://bugzilla.gnome.org/show_bug.cgi?id=672640
If we explicitly check for a NULL pointer, clang will assume
that the pointer may be NULL at some point. We clearly rely
on the pointer being non-NULL earlier, so fix this guy up.
https://bugzilla.gnome.org/show_bug.cgi?id=674876
meta_window_actor_has_shadow() is called for every paint for every
window, verbosely logging in it makes the output of MUTTER_VERBOSE
pretty much useless.
All animations use the constants directly, so this is just declaring
a bunch of local variables and then doing nothing with it.
Another clang warning.
https://bugzilla.gnome.org/show_bug.cgi?id=674876
Require the headers for "XFree86" Xinerama to be present at compile
time. The older "Solaris" Xinerama is only needed for versions of
Solaris where Mutter is unlikely to work. Solaris 10 and 11 include
the XFree86 Xinerama libraries, and apparently that's the only version
that will actually work for Solaris 11, which uses Xorg.
https://bugzilla.gnome.org/show_bug.cgi?id=674727
Cogl now has public experimental API to create a rectangle texture
which we can use instead of creating a foreign texture with GL. This
avoids Mutter depending on Cogl including a GL header from its public
headers which it might not do in future.
https://bugzilla.gnome.org/show_bug.cgi?id=672711
Since Cogl doesn't support multi-texturing with sliced textures and the
shape texture is combined with the texture-from-pixmap texture we need
to make sure we never construct a sliced mask texture. This patch simply
passes the COGL_TEXTURE_NO_SLICE flag to cogl_texture_from_data when
creating the shape mask texture.
https://bugzilla.gnome.org/show_bug.cgi?id=674731
It seems that the only usage of the "widget" parameter throughout
the entire call chain was to pass between two function calls as
mutual recursion.
https://bugzilla.gnome.org/show_bug.cgi?id=671104
Currently pressing the overlay key only triggers the overview if
no other key is pressed between KeyPress and KeyRelease. Extend
this logic to pointer events, so that KeyPress + ButtonPress actions
are treated explicitly different from "pure" overlay key presses.
In particular, this change allows to re-use the overlay key as mouse
button modifier.
https://bugzilla.gnome.org/show_bug.cgi?id=662476
If we want to support keybindings from extensions installed in the user's
directory, we can't take a schema, as the GSettings object needs to have
a special GSettingsSchemaSource.
https://bugzilla.gnome.org/show_bug.cgi?id=673014
Starting the auto-maximize process on a window like a
META_WINDOW_DESKTOP window that is not maximizable gets placement into
a confused state and eventually results in the window being positioned
at the wrong position (the position that an auto-maximized window would
be restored to.)
https://bugzilla.gnome.org/show_bug.cgi?id=673566
When mutter recognizes a full-screen window, it tries to raise it to the top
of the stack. Unfortunately, a recent rewrite of the stack code didn't do
well with raising a window to the top of the stack if the stack wasn't in
a consistent state -- it would crash. Ensure that the stack is in a consistent
state at the top of meta_stack_raise/meta_stack_lower.
https://bugzilla.redhat.com/show_bug.cgi?id=806437https://bugzilla.gnome.org/show_bug.cgi?id=672797
Commit 2fc880db switched from focusing the topmost window as the default
window to focusing the MRU window. This was done in alignment with the
introduction of per-workspace MRU lists to avoid problems where the window
stack was inadvertently changed when focusing windows during window switches.
Now that focusing windows don't have as big an impact on the stacking order,
we can revert back to focusing the top window, which is less confusing to the
user.
For now, leave per-workspace MRU lists, as they're a pretty good approximation
of a global MRU list, and it works well enough.
https://bugzilla.gnome.org/show_bug.cgi?id=620744
This is a new value, not associated with any keybindings, useful
when the WM needs to order the applications by last-interaction,
taking into account all windows.
https://bugzilla.gnome.org/show_bug.cgi?id=667552
"warning: 'match_tile_mode' may be used uninitialized in this function", it
complains. It thinks it's not unused because of other values of
window->tile_mode, but other complex logic ensures that it can't be
META_TILE_MAXIMIZED, so this is a safe commit.
Windows that have minimum widths larger than the screen can't be maximized,
even though we put them in a maximized state and allow users to do so:
the window just won't change size and position. Fix this by simply not giving
the option to maximize, like what happens for non-resizable windows.
https://bugzilla.gnome.org/show_bug.cgi?id=643606
A lot of code did something similar to:
MetaFrameBorders borders;
if (window->frame)
meta_frame_calc_borders (window->frame, &borders);
else
meta_frame_borders_clear (&borders);
Sometimes, the else part was omitted and we were unknowingly using
uninitalized values for OR windows. Clean this up by just testing
for a NULL frame in meta_frame_calc_borders and clearing for the
caller if so.
https://bugzilla.gnome.org/show_bug.cgi?id=643606
Since we're going to be evaluating the work area at startup now, we need
to make sure that we don't iterate over workspaces before they're assigned.
The easiest way to do this is to make sure that meta_window_get_workspaces
doesn't crash.
https://bugzilla.gnome.org/show_bug.cgi?id=643606
Returns the matching tiled window. This is the topmost tiled window in a
complementary tile mode that is:
- on the same monitor;
- on the same workspace;
- spanning the remaining monitor width;
- there is no 3rd window stacked between both tiled windows that's
partially visible in the common edge.
https://bugzilla.gnome.org/show_bug.cgi?id=643075
After the changes in style handling in GTK+, mutter's tooltips no
longer match the tooltip style used in applications. Given that
all buttons in the default layout are well-known, killing tooltips
altogether rather than fixing the styling issues looks like a valid
approach.
https://bugzilla.gnome.org/show_bug.cgi?id=645101
Windows that start up in a size that is almost as big as the workarea create
extra work for the user (resizing or maximizing) so save the user's time by
detecting such windows and automaximize them.
https://bugzilla.gnome.org/show_bug.cgi?id=671677
Basically we don't really want to create windows that are almost maximized in
size but not actually maximized. This creates work for the user and makes it
very difficult to use and resize manually.
So set the newly unmaximized window size to the previously used size or 80% of the
size of the current workarea (attempting to retain natural aspect ratio if
possible), whichever is smaller.
https://bugzilla.gnome.org/show_bug.cgi?id=671677
Some modifiers like NumLock and ScrollLock don't make sense in
keybindings, which is why we ignore them when matching keybindings
to events. We should do the same in Javascript, so add an accessor
function.
https://bugzilla.gnome.org/show_bug.cgi?id=665215
The move-to-corner keybindings weren't treated as user actions, which
resulted in them not affecting the saved position - they weren't
always being treated as sticky. Marking them as a user action revealed
bugs in the positioning logic that were hidden by the constraint
code applied to automated moves. Fix those as well. Bug tracked
down by Mariusz Libera.
https://bugzilla.gnome.org/show_bug.cgi?id=661256
We currently sync the number of workspaces with the corresponding
preference. This is not really useful with GNOME Shell's dynamic
handling of workspaces, not least as the setting is effectively
ignored. Worse, it will trigger writes to dconf on login, slowing
down startup, so add a setting to indicate that workspaces are managed
dynamically and really ignore the num-workspaces setting when set.
https://bugzilla.gnome.org/show_bug.cgi?id=671568
We were relying on GTK+ emitting GtkWidget::style-updated during
widget initialization to create the GtkStyleContexts used for
window decorations. A recent GTK+ update broke this assumption,
so do the necessary initialization ourselves.
https://bugzilla.gnome.org/show_bug.cgi?id=671796
Mutter originally started out with the idea that only a subset of the total
API was exposed to plugins, so some APIs are duplicated on MutterPlugin.
We've long since abandoned that idea; remove these wrappers.
https://bugzilla.gnome.org/show_bug.cgi?id=671103
After _unmanage the object is semantically dead even if technically it's not,
so remove the prefs listener here to prevent it being called for a dead
object.
In particular this fixes a crash when starting up gnome-shell with at least
one gimp utility window opened which causes mutter to create a MetaWindow for
it only to immediately get an UnmapNotify afterwards which causes mutter to
unmanage the MetaWindow. Afterwards prefs_changed_callback is called for this
dead MetaWindow and tries to dereference the window->monitor pointer which is
already NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=671087
The experimental Cogl api cogl_texture_pixmap_new() was recently changed
so it now expects an explicit CoglContext argument and it can also
return exceptions now via a GError. This patch updates mutters use of
the api accordingly.
This was preventing Clutter from running its dispose, preventing
it from being destroyed correctly. While a major bug and possibly
big memory leak, the most obvious effect was the message that Clutter
spat out:
Clutter-CRITICAL **: clutter_actor_iter_next: assertion `ri->age == ri->root->priv->age' failed
Since we never disposed the actor correctly, it was never removed
from its parent, and the age wasn't updated correctly.
Even with --enable-compile-warnings=error, avoid erroring out on deprecations
for the moment, since we are hitting many Clutter deprecations and some are
hard to fix.
When we were shaping the window with a cairo region, there was an easy
optimization to restrict painting only to the pixels we were going to
actually draw. With rounded corners, the amount of work we have to do
figure out what pixels isn't worth the small savings of not drawing the
completely transparent parts of the corners, so remove this optimization,
and the supporting meta_shaped_texture_get_visible_pixels_region()
https://bugzilla.gnome.org/show_bug.cgi?id=657639
ClutterTexture has many features that we simply don't use and don't make
sense for a subclass with custom drawing. Deriving directly from ClutterActor
simplifies our code by avoiding workarounds and makes things more robust.
Additionally, make it public. GNOME Shell was already assuming that any
MetaShapedTexture was also a ClutterTexture, and we need to replace these
bits with new API for GNOME Shell to use.
https://bugzilla.gnome.org/show_bug.cgi?id=660941
When meta_display_unmanage_window_for_screen() is called, it gets a list
of windows and iterates over them and unmanages them, but unmanaging a
window with attached modal dialogs also unmanages those attached modal
dialogs (in the normal case, temporarily), so we need to guard against
such cases by ref'ing the windows in the list and checking if they have
already been unmanaged.
https://bugzilla.gnome.org/show_bug.cgi?id=668299https://bugzilla.redhat.com/show_bug.cgi?id=760918
If we get two configure events on the root window in close
sequence, then we could get the sequence:
ConfigureNotify on the root window w1xh1
Processed by Mutter
clutter_actor_set_size(stage, w1, h1)
<relayout happens, stage window resized by clutter>
ConfigureNotify on the root window, w2xh2
Processed by Mutter
clutter_actor_set_size(stage, w2, h2)
ConfigureNotify on the stage window, w1, h1)
Processed by Clutter
clutter_actor_set_size(stage, w1, h1)
<relayout happens, stage window resized by clutter>
Leaving the stage at the wrong size. To avoid fighting with Clutter,
switch to resizing the stage with XResizeWindow(), similar to how a
toplevel window is handled by a window manager.
For maximized windows, titlebars cannot be used to reposition or
scale the window, so if an application does not use it to convey
useful information (other than the application name), the screen
space occupied by titlebars could be put to better use.
To account for this use case, a setting for requesting that windows'
titlebars should be hidden during maximization has been added to
GTK+, add support for this in the window manager.
https://bugzilla.gnome.org/show_bug.cgi?id=665617
The current code requires windows to be resizable to be considered
for tiling, which excludes all maximized/tiled windows. While this
restriction concurs with the desired behavior for edge-tiling, it
feels overly restrictive for keybindings.
As the edge-tiling code in update_move() already ensures the above
restriction, it seems save to remove it from the can_tile_maximized()
function, assuming that windows that are not meant to be tiled or
maximized won't provide a maximize function.
https://bugzilla.gnome.org/show_bug.cgi?id=648700
Usually tiling involves a size change and the frame is redrawn
automatically, however this is not the case when switching directly
between left- and right-tiled.
Ensure that a redraw happens in that case as well.
https://bugzilla.gnome.org/show_bug.cgi?id=648700
Rather than defining keybindings in static arrays generated at compile
time, store them in a hash table initialized in meta_display_init_keys()
and filled in init_builtin_keybindings().
This is a prerequisite for allowing to add/remove keybindings at runtime.
https://bugzilla.gnome.org/show_bug.cgi?id=663428
Commit d0910da036 merged the visual-bell/visual-bell-type options,
but the change turned out too disruptive for gnome-control-center /
gnome-shell, so gsettings-desktop-schemas commit a5819b2a4e9 re-added
the separate option.
Move preferences to GSettings, using mainly shared schemas from
gsettings-desktop-schemas.
Unlike GConf, GSettings support is not optional, as Gio is already
a hard dependency of GTK+.
https://bugzilla.gnome.org/show_bug.cgi?id=635378
The code here was always incorrect - we were processing damage events for
windows without having a texture. Before, this didn't matter, as
cogl_texture_get_width silently returned 0 for invalid handles. Cogl commit
4c3dadd35e changed this.
The fix here involves two strategies. First, we try to guard MetaTextureTower
from invalid textures. Second, we try not to go down the path that eventually
calls meta_shaped_texture_update_area by not handling damage events if we
don't have a texture for the window.
https://bugzilla.gnome.org/show_bug.cgi?id=660941
meta_window_move_resize_frame operates much like
meta_window_move_resize, but ensures the window
and its frame (if present) will fit within the
specified dimensions.
https://bugzilla.gnome.org/show_bug.cgi?id=651899
We never destroy the later list that's added by meta_later_add.
==4289== 16 bytes in 1 blocks are definitely lost in loss record 1,632 of 7,258
==4289== at 0x4C2640D: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==4289== by 0x5178D9F: standard_malloc (gmem.c:88)
==4289== by 0x5178E37: g_malloc (gmem.c:164)
==4289== by 0x51924B5: g_slice_alloc (gslice.c:842)
==4289== by 0x5194521: g_slist_insert_sorted_real (gslist.c:900)
==4289== by 0x519465A: g_slist_insert_sorted (gslist.c:957)
==4289== by 0x4EA609A: meta_later_add (util.c:876)
==4289== by 0x4E9C330: meta_screen_queue_workarea_recalc (screen.c:2640)
==4289== by 0x4E9A360: update_num_workspaces (screen.c:1646)
==4289== by 0x4E99026: meta_screen_new (screen.c:924)
==4289== by 0x4E7AB51: meta_display_open (display.c:803)
==4289== by 0x4E9168E: meta_run (main.c:552)
https://bugzilla.gnome.org/show_bug.cgi?id=642652
If we are moving in snap mode (shift pressed) we don't want to tile. We must
also cancel any pending tiling if snap mode is activated during the move drag.
https://bugzilla.gnome.org/show_bug.cgi?id=662270
When we reparent a window to the root when we're exiting, we need to offset
the position by the invisible borders, otherwise windows will creep up and
to the left.
https://bugzilla.gnome.org/show_bug.cgi?id=660848
meta_window_get_current_tile_area() computes the area where the tiled window
should be based on the current pointer position but that's only meaningful
when the user is actually dragging the window.
When running the tiling constrain the pointer might be on other monitor and at
that point the window jumps to this other monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=642580
When using more than one monitor, tiled maximization can be triggered with the
pointer in one monitor while most of the window area remains in another. This
means that the maximization constraint would maximize the window into the wrong
monitor as it uses the work area size/position as target.
Fix this by using the current tile area as target size/position.
https://bugzilla.gnome.org/show_bug.cgi?id=657519
Since the frame window size that meta_window_move_resize() uses depends
on whether the window has horizontal/vertical resize functionality, we
need to update this flag before we resize the window.
https://bugzilla.gnome.org/show_bug.cgi?id=659854
If a window had a type hint intended for override-redirect windows
like NOTIFICATION, we ended up with a window that was decorated but
with a frame type of FRAME_TYPE_LAST, causing assertion failures.
Fix this by making recalc_window_features() just call
meta_window_get_frame_type().
https://bugzilla.gnome.org/show_bug.cgi?id=599988
The theme state used to use GtkStateType, but was ported over to GtkStateFlags,
leaving behind a broken assertion that fails when using certain Metacity
themes, for example Nodoka.
https://bugzilla.gnome.org/show_bug.cgi?id=661286
_NET_FRAME_EXTENTS should contain the difference between where a window asked
to be placed, and where it is. Ideally, this should be the same as the visible
extents.
https://bugzilla.gnome.org/show_bug.cgi?id=659848
A window can specify geometry that it is placed at. We need to exclude invisible
borders when calculating where to place the window, otherwise the window will have
a strange offset.
https://bugzilla.gnome.org/show_bug.cgi?id=659848
When a window loses its frame we must unset any overlay path previously set on
the shaped texture.
Not doing so would cause rendering glitches near the window corners in
e.g. chrome/chromium by changing the Appearance preference "Use system title
bar and borders" → "Hide system title bar and use compact borders".
https://bugzilla.gnome.org/show_bug.cgi?id=659477
Shaded windows are assumed to be reduced to the titlebar: the
current code enforces a visible bottom border of 0 and only takes
the size of the title bar (+ invisible top border) into account
when resizing the frame. However, we still add an invisible border
at the bottom, which is than subtracted from the title bar, resulting
in shaded windows being cut off.
Fix by forcing both visible and invisible bottom borders to 0.
https://bugzilla.gnome.org/show_bug.cgi?id=659266
XFixesCreateRegionFromWindow does not take the window's position into account,
which results into setting a wrong shape for windows not located on the
leftmost monitor.
Fix that by creating the region from the window's MetaRectangle.
https://bugzilla.gnome.org/show_bug.cgi?id=657869
If we do this, then there will be invisible borders around the top of attached
modal dialogs, which is unnecessary -- they can't be resized from the top
border and just interfere with the parent dialog.
This requires changing a bit of API to help identify the type of dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=657795
Our usage of DamageReportBoundingBox was causing us to miss some
updates when an area of the screen was drawn twice in rapid
succession. Add an explicit XSync() call to force the server
to flush rendering to the kernel before we draw.
https://bugzilla.gnome.org/show_bug.cgi?id=657071
If XRANDR is availible, we track the first (or primary) output per
crtc (== xinerama monitor) so when the monitors change we can try
to find the same output and move windows there. If we can't find the
original monitor in the new set (or XRANDR is not supported) we move
the window to the primary monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=645408
The ignored_serials member of Display refers explicitly to crossing
serials - rename the member and associated functions and constants
for clarity.
https://bugzilla.gnome.org/show_bug.cgi?id=597190
* Export meta_display_add_ignored_crossing_serial()
* Add the serial for reshaping the stage
* Increase the size of the "ignored_serials" array a bit to
try to avoid the possibility of losing serials from multiple
reshapes happening close together.
https://bugzilla.gnome.org/show_bug.cgi?id=597190
This goes better with the general style of similar alerts throughout
GNOME 3, and as has been pointed out in bug 591735, 'Mutter' is
a somewhat unfortunate title in several lanuages, such as English
and German.
* At least one line (possibly blank) is required after a function name for a doc header
to be parsed correctly.
* SnStartupSequence isn't a type known to introspection
Some apps that do a lot of rendering on the screen like games, mostly run in
fullscreen where there is no need for them to be redirected doing so does add
an overhead; while performance is critical for those apps.
This can be disabled / enabled at runtime using
meta_enable_unredirect_for_screen / meta_disable_unredirect_for_screen
https://bugzilla.gnome.org/show_bug.cgi?id=597014
Instead of requiring a singleton MetaBackgroundActor for the screen,
allow creating multiple copies that internally share a single
CoglTexture behind the scenes. This will be useful for allowing
multiple views of the screen background with different rendering
options.
https://bugzilla.gnome.org/show_bug.cgi?id=656433
Different bits of code were using slightly different checks to test
whether a window was an attached dialog. Add a new
meta_window_is_attached_dialog(), and use that everywhere.
Also, freeze the is-attached status when the window is first shown,
rather than recomputing it each time the caller asks, since this could
cause problems if a window changes its type after it has already been
attached, etc. However, if an attached window's parent is destroyed,
or an attached window changes its transient-for, then fix things up by
destroying the old MetaWindow and creating a new one (causing
compositor unmap and map events to be fired off, allowing the display
of the window to be fixed up).
Remove some code in display.c that tried to fix existing windows if
the gconf setting changed, but which didn't actually do anything (at
least under gnome-shell). However, if 654643 was fixed then the new
behavior with this patch would be that changing the gconf setting
would affect new dialogs, but not existing ones.
https://bugzilla.gnome.org/show_bug.cgi?id=646761
The code here was wrong in every way: it only updated the shape if all the
borders changed. It never saved new last_borders even if it *had* changed,
and the bounding rectangle's x and y positions were still important otherwise.
This had user-visible impact when doing simple things like changing the
border_width. It would short-circuit here and due to the above incorrectness,
weirdness could happen where windows would be cut off and so on.
https://bugzilla.gnome.org/show_bug.cgi?id=656334
gtk:custom() requires a fallback color in case the GTK+ theme in use
does not define the desired color. As in general the fallback color
will approximate the intended color, there is the risk of typos going
unnoticed. To make catching these kind of errors easier, allow to ignore
the fallback color specified (and fall back to a nice shade of pink
instead) by setting an environment variable.
https://bugzilla.gnome.org/show_bug.cgi?id=656112
get_outer_rect now returns the visible region, and a new get_input_rect
method returns the boundaries of the full frame, including the possible
invisible regions. When undecorated, both do the samething.
https://bugzilla.gnome.org/show_bug.cgi?id=644930
Just a quick little commit to help clean things up for when we add invisible
borders. Additionally, do a little housekeeping in preview-widget as well.
https://bugzilla.gnome.org/show_bug.cgi?id=644930
There were actually *two* MetaFrameGeometry structs: one in theme-private.h,
one in frame.h. The latter public struct was populated by a mix of (void*)
casting and int pointers, usually pulling directly from the data in the private
struct.
Remove the public struct, replace it with MetaFrameBorders and scrap all
the pointer hacks to populate it, instead relying on both structs being used
in common code.
This commit should be relatively straightforward, and it should not do any
tricky logic at all, just a sophisticated find and replace.
https://bugzilla.gnome.org/show_bug.cgi?id=644930
Since we're not setting the frame's output shape any more, it doesn't
make sense to calculate the output shape based on the frame window.
Instead, track the client window directly and calculate the output shape
based on that.
https://bugzilla.gnome.org/show_bug.cgi?id=644930
In preparation for switching to handling the output shape purely by what we
paint, stop applying a shape to the frame of the window. Even when we restore
handling the output shape, this will change the behavior with respect to input;
transparent areas between the frame and the contents will stop clicks rather
than passing them through, but that is arguably at least as expected
considering how that we decorate shaped windows with a frame all around.
https://bugzilla.gnome.org/show_bug.cgi?id=644930
We were leaving some members of the button_layout struct uninitialized if the
pref string didn't have at least one colon or if it was an empty string ("").
https://bugzilla.gnome.org/show_bug.cgi?id=654539
MetaShapedTexture can be a ClutterX11TexturePixmap sub-class, given that
ClutterGLXTexturePixmap is just a shim compatibility layer since Clutter
1.4, and it's been deprecated.
https://bugzilla.gnome.org/show_bug.cgi?id=655064
meta-texture-rectangle and meta-shaped-texture both create textures
with GL_TEXTURE_RECTANGLE_ARB as the target using direct GL
calls. This patch moves that code into a shared utility function in a
separate file instead. The function resolves the required GL symbols
dynamically instead of linking to them directly so that if Clutter
eventually stops linking to -lGL mutter will continue to build. The
function also splits the texture creation into a separate texture
creation and data upload stage so that it can use
cogl_texture_set_region to upload the data. That way it can avoid
clobbering the glPixelStore state and it can let Cogl do any necessary
format conversion. The code preserves the old value of the rectangle
texture binding instead of clobbering it because Cogl expects to be
able to cache this value to avoid redundant glBindTexture
calls. Finally, the function uses cogl_object_set_data to
automatically destroy the GL texture when the Cogl texture is
destroyed. This avoids having to have special code to destroy the cogl
texture.
https://bugzilla.gnome.org/show_bug.cgi?id=654569
texture_tower_revalidate_fbo() called cogl_flush() to work around
clutter bug #2110, which has been long fixed.
As we depend on clutter 1.7.x anyway we can just remove that workaround.
https://bugzilla.gnome.org/show_bug.cgi?id=654729
Clutter now has some API to get the bounds of the current redraw clip
so Mutter no longer needs to make direct GL calls to get the scissor
rect. This should make it more robust against Cogl or Clutter changing
how it does the clipping.
https://bugzilla.gnome.org/show_bug.cgi?id=654551
Calling meta_later_add() or meta_later_remove() from within a
META_LATER_BEFORE_REDRAW callback ended up being a no-op, because of
how run_repaint_laters() was fiddling with the laters list. (This
resulted in a crash in window.c:idle_calc_repaint(), which assumed it
would only be called when a certain queue was non-empty, but was
getting called anyway because of a failed meta_later_remove() call.)
Fix this by having run_repaint_laters() work on a copy of the laters
list instead, and add refcounting to MetaLater so that removing a
later that run_repaint_laters() hasn't gotten to yet won't cause
problems.
https://bugzilla.gnome.org/show_bug.cgi?id=642957
When we get a press of the overlay key, and then another key is pressed,
first try to handle the combination as a global keybinding. If that fails,
call XAllowEvents(..., ReplayKeyboard, ...) to let it be handled by
our per-window keybindings or by the application.
This requires restructuring things to call XAllowEvents a bit later
so we can pass the right mode.
https://bugzilla.gnome.org/show_bug.cgi?id=624869
meta_frames_destroy() was not safe to be called multiple times, which
was causing a crash on exit due to something else changing somewhere
that makes it get called multiple times.
https://bugzilla.gnome.org/show_bug.cgi?id=654489
- menus have a very subtle shadow, define the outline better. Required for gtk theming.
- focused windows are better identified now as unfocused windows have a subtle shadow.
https://bugzilla.gnome.org/show_bug.cgi?id=649374
A x/y typo that was causing shadow bounds to be incorrectly
computed and trails to be left in some circumstances. Behavior
noted by Jakub Steiner.
https://bugzilla.gnome.org/show_bug.cgi?id=649374
The code assumed that the focus window was always the one at the
top of the window stack, which is not true if an unfocused window
has the above hint set.
Rather than fixing this assumption, rename the function to
lower_beneath_grab_window() and use the display's grab window - the
function is only used for displaying the tile previews, which means
that we want the grab window anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=650661
Add an additional color type to pick up colors defined with
@define-color in the GTK+ theme's CSS:
gtk:custom(name,fallback)
(where "name" refers to the name defined in GTK+'s CSS, and fallback
refers to an alternative color spec which is used when the color
referenced by "name" is not found)
The main intent of the change is to allow designers to improve
Adwaita's dark theme variant without having to compromise on colors
which work in the light variant as well.
https://bugzilla.gnome.org/show_bug.cgi?id=648709
This patch fixes an issue encountered when building mutter
out-of-tree:
* When generating mutter-enum-types.[ch], the glib-mkenums command is
executed from $(srcdir), so it is wrong to prepend $(srcdir) to the
template file.
https://bugzilla.gnome.org/show_bug.cgi?id=624910
We now use GtkStyleContext exclusively, so it's a bit weird to store
widget state as GtkStateType and translate it always to GtkStateFlags.
Just use GtkStateFlags instead of GtkStateType.
https://bugzilla.gnome.org/show_bug.cgi?id=650586
GtkStyleContext no longer has dark/light colors GtkStyle used to
have. We already have compatibility code for them in theme.c, so
add two helper functions to make it available outside theme.c.
https://bugzilla.gnome.org/show_bug.cgi?id=650586
GdkColor is about to be deprecated, so move to GdkRGBA instead.
It might be worth considering using cairo patterns for the gradients
rather than using custom code to render gradients to a pixbuf which
is then drawn with cairo, but for now this is just a straight port
of the existing code.
https://bugzilla.gnome.org/show_bug.cgi?id=650586
When detaching/attaching a dialog, we were only updating
appears-focused on the parent if the child itself was focused, but in
fact, we need to do it if the child has an attached child which is
focused too.
To simplify the case of detaching a focused subtree from its parent,
we change meta_window_propagate_focus_appearance() to use
@window->display->focus_window as the window to add/remove as the
attached_focus_window, and @window only as the starting point to
propagate from. That way we can propagate focus-removal up to
@window's (soon-to-be-ex-)ancestors without having to remove it from
its descendants as well.
https://bugzilla.gnome.org/show_bug.cgi?id=647712
Don't set a window's xtransient_for if it would create a loop. Since
this is the only place we ever set xtransient_for, we can therefore
assume everywhere else that it does not loop.
https://bugzilla.gnome.org/show_bug.cgi?id=647712
Back the API version down to 3.0; since we don't make any stability
guarantees, there's no reason to have a merry-go-round of different
directories and filenames that people have to keep up with.
According to the XShape specification, the shaped region should always be
a subset of the bounding region. Certain programs such as wine depended
on this behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=627880
* When unmanaging a screen, stop redirecting subwindows explicitly,
so that we do that before destroying the window manager selection
window.
* Improve comment in the retry code
* When exiting because the previous compositor couldn't be replaced,
don't g_error() and drop a core file.
https://bugzilla.gnome.org/show_bug.cgi?id=653121
When there was no root background pixmap, we were using a 1x1 repeating
texture as a simple way of drawing a solid color without adding a
second code path. However, when that 1x1 texture was combined into
a larger "atlas texture", hardware repeat couldn't be used, so a
small inefficiency from this approach became an enormous inefficiency
as clutter drew every pixel of the background as a separate rectangle.
https://bugzilla.gnome.org/show_bug.cgi?id=652507
When left-clicking the frame border with the titlebar being
off-screen, rather than starting the expected grab operation the
window menu was popped up.
This behavior is pretty confusing, especially since the menu button
was removed from the default layout, making right-clicking the only
way to get to the window menu.
https://bugzilla.gnome.org/show_bug.cgi?id=652369
meta_run() calls meta_finalize() after the main loop exits, which ends
up calling meta_display_close(), which calls
meta_quit(META_EXIT_SUCCESS), meaning that any exit status passed to
the original meta_quit() call is lost.
Fix this by ignoring meta_quit() calls after the main loop is no
longer running.
https://bugzilla.gnome.org/show_bug.cgi?id=652010
Like the setting of new frames' background is delayed until the
frame is associated with its window, delay attaching the initial
style, so that the correct style variant is picked.
https://bugzilla.gnome.org/show_bug.cgi?id=645355
When the _GTK_THEME_VARIANT property changes, rather than just
updating the window's theme_variant property, update its frame
style as well, so that the window decoration reflects the requested
variant. As the initial properties of a window may be read before
its frame is created, there will be cases where the change is not
picked up initially.
https://bugzilla.gnome.org/show_bug.cgi?id=645355
In order to pick up colors from a GtkStyleContext, a temporary
GtkStyle object was created from the context and destroyed after
copying the requested GdkColor. This is slightly inefficient, so
get the appropriate GdkRGBA from the context and translate it to
a GdkColor, based on the compatibility code in gtkstyle.c.
https://bugzilla.gnome.org/show_bug.cgi?id=645355
Rather than sharing a single style context between all frames, use
a default style and one style per encountered variant (as determined
by the _GTK_THEME_VARIANT property), so that colors from the GTK+ style
are picked from the correct theme variant.
https://bugzilla.gnome.org/show_bug.cgi?id=645355
Since version 3.0, GTK+ has support for style variants. At the moment,
themes may provide a dark variant, which can be requested by
applications via GtkSettings. The requested variant is exported to
X11 via the _GTK_THEME_VARIANT property - support this property, in
order to pick up the correct style variant in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=645355
Rather than using a single widget's style for GTK+ colors in themes,
use the style context parameter of the drawing functions for those
colors. Right now, a single style context is shared between frames,
but this will change to support different style variants.
https://bugzilla.gnome.org/show_bug.cgi?id=645355
To determine the correct background style, the UI needs to access
some frame properties via meta_core_get(); this call will bail out
early if window->frame is unset, so delay the call until the
association is made.
https://bugzilla.gnome.org/show_bug.cgi?id=645355
gdk_cairo_set_source_rgba() is a convenience function which was
added to GTK+-3.0 after the port to GtkStyleContext, so we ended
up using cairo_set_source_rgba() instead. Save a couple of lines ...
For the purposes of window placement or arranging window manager or
plugin controls, screens that are just mirrors of other screens should
be ignored, so filter them out of the monitors list.
https://bugzilla.gnome.org/show_bug.cgi?id=649299
If a window is not maximizable, then that probably means it looks dumb
at very large sizes. Even if its hints would allow you to manually
resize it to a large size, don't allow automatically tiling it to half
the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=647901
If a window had no title property set, then the
application-not-responding dialog would cause Mutter to crash
because window->title was NULL; handle that case and use the
string "Application is not responding."
https://bugzilla.gnome.org/show_bug.cgi?id=649114
Command line arguments are supposed to be in the locale encoding,
not UTF-8, and Zenity decodes command line string command line
arguments with this assumption using GOption.
There was a half-hearted attempt to deal with this in delete.c,
but it wasn't correct since it immediately mixed the window title,
converted to the locale encoding with a UTF-8 message.
https://bugzilla.gnome.org/show_bug.cgi?id=649114
As a library, libmutter should not be setting the default translation
domain to point to itself.
Also, move the bindtextdomain() call earlier
(meta_get_option_context), so that translations of command-line
options will be available.
We could call textdomain() in mutter.c, but there's no need to, since
mutter uses dgettext() everywhere anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=649202
Previously, the restart command hardcoded "mutter" as the binary name.
This commit changes it to use g_get_prgname() which has a better chance
of being correct (and it does fix session saving for gnome-shell).
Now that mutter is a library, it might be more correct (but also
much higher overhead) to add api for setting these things from
the outside.
https://bugzilla.gnome.org/show_bug.cgi?id=648828
An ARGB window with a frame is likely something like a transparent
terminal. It looks awful (and breaks transparency) to draw a big
opaque black shadow under the window, so clip out the region under
the terminal from the shadow we draw.
Add meta_window_get_frame_bounds() to get a cairo region for the
outer bounds of the frame of a window, and modify the frame handling
code to notice changes to the frame shape and discard a cached
region. meta_frames_apply_shapes() is refactored so we can extract
meta_frames_get_frame_bounds() from it.
https://bugzilla.gnome.org/show_bug.cgi?id=635268
It's useful to get frame shapes and manipulate them within Mutter, for
example so that the compositor can use them to clip drawing.
For this, we'll need the regions as cairo regions not X regions, so
convert frame shaping code to work in terms of cairo_region_t.
https://bugzilla.gnome.org/show_bug.cgi?id=635268
Using MetaWindowActor.opacity for _NET_WM_WINDOW_OPACITY makes it
difficult to implement effects like fading a window in on map.
Instead, set the opacity on the MetaShadedTexture child and use
it when drawing the shadow.
Since the check MetaWindowGroup does on meta_actor_get_paint_opacity()
no longer covers this, we need to handle the opacity in
meta_window_actor_get_obscured_region() explicitly.
https://bugzilla.gnome.org/show_bug.cgi?id=648613
If a window can not be tiled, e.g. due to its minimum size hints,
dragging away from the top after activating the maximize tile preview
does not cancel the maximization request, the only way to do so is by
hitting Escape.
To fix, reset the tiling state in the maximize-tile code path as
well if necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=646149
Apparently the "fox" toolkit doesn't set WM_CLIENT_MACHINE; while we
could do gymnastics to attempt to figure this out (talk to the X
server?), better to just default to FALSE.
https://bugzilla.gnome.org/show_bug.cgi?id=647662
Since appears-focus only propagates up from modal dialogs, if an
application removed the modal hint from a dialog before destroying it,
then its parent would be left with a stray reference to it in
attached_focus_window, causing it to be permanently appears-focused.
The obvious fix, calling meta_window_propagate_focus_appearance() when
the modal hint is removed, tends to cause noticeable flashing, because
the window will get drawn unfocused and then focused again.
So instead we just change meta_window_propagate_focus_appearance() to
check the window type only when focusing in, not when focusing out.
This would also cause flashing, but in this case we can avoid it by
not notifying the change in appears-focus on the parent window if it
is the expected_focus_window (which it will be by this point). (This
does mean though that if something weird happens and the window
doesn't end up becoming the focus window, it won't get redrawn
unfocused until something else forces it to.)
https://bugzilla.gnome.org/show_bug.cgi?id=647613
We need to redraw a window's shadow any time the value of
meta_window_appears_focused() changes. So make that into a property so
we can get notifications on it.
https://bugzilla.gnome.org/show_bug.cgi?id=636904
This is necessary for gnome-shell to know whether it should try to
replace the org.gnome.Shell DBus name.
Note: We can't just #include <meta/util.h> because it #defines '_'
at least which obviously conflicts with core gettext. We should
un-export util.h or fix it.
https://bugzilla.gnome.org/show_bug.cgi?id=645590
As the position of attached modal dialogs is determined entirely
by the position of the parent window, the dialog may end up
partially off-screen (especially if the dialog is wider than the
parent). In this case, diverge from the calculated position and
try to fit the dialog on-screen.
https://bugzilla.gnome.org/show_bug.cgi?id=631308
This is useful for DnD to another monitor in gnome-shell.
In addition to a normal move it corrects the saved rect for
maximized and fullscreened windows.
https://bugzilla.gnome.org/show_bug.cgi?id=645032
Currently attached modal dialogs are not resizable, but we don't
communicate this to GTK+, so the dialog may end up with resize
grips anyway. As a fix, allow resizing, but account for the dialog
being centered to its parent.
https://bugzilla.gnome.org/show_bug.cgi?id=643597
Getting the contents of a depth-1 pixmap through cairo gives us
an alpha pixmap. We need to convert to a monochrome pixmap
as is expected by the ICCCM definition of WM_HINTS.
https://bugzilla.gnome.org/show_bug.cgi?id=641975
apply_mask made some wrong assumptions that became untrue
after rendering_cleanup landed, such as the number of channels
in the pixmap, causing corruption.
https://bugzilla.gnome.org/show_bug.cgi?id=641975
Currently, attached modal dialog can be grabbed (either by the
title bar, or using Alt+Button1), though they won't move when
dragged. To address this, grab the parent in that case, which
allows to move both the parent and the attached dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=638674
Commit 96c43866 changed the tiling behavior to prefer edge tiling
over maximization in corner cases (well, quite literally). As a
side effect, it only allows untiling of edge-tiled windows by
dragging the window towards the correct edge.
This patch restores the old behavior for untiling, while keeping
the new behavior for untiled windows.
https://bugzilla.gnome.org/show_bug.cgi?id=645455
For tiling, we check whether the pointer is near the edges of
the monitor where the pointer is located, so checking that the
pointer is within the bounds of the monitor is unnecessary and
confusing.
Mark that the the third argument to meta_rectangle_union and
meta_rectangle_intersect is an (out) argument that should be created
by the language binding.
https://bugzilla.gnome.org/show_bug.cgi?id=645247
If dragging the title bar to the edge of the screen to side-tile,
it's easy to end up above the workarea and end up maximized instead.
Make the entire side of the screen act as edge-tiling.
https://bugzilla.gnome.org/show_bug.cgi?id=644961
In a performance or regression testing environment, we may want to
only manage windows from a particular test program, and ignore all
other windows. The MUTTER_WM_CLASS_FILTER environment variable is a
list of WM_CLASS values that should be managed; other windows will
be unmapped and ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=644252
gtk3 no longer has the --screen command-line argument, which mutter
was passing to zenity. Use --display (with an explicitly-specified
screen number) instead.
https://bugzilla.gnome.org/show_bug.cgi?id=643683
This made sense back in the day of stateless window managers,
but gnome-shell isn't. gnome-session will handle gnome-shell
crashing, since it's a required component.
https://bugzilla.gnome.org/show_bug.cgi?id=644529
This adds a preference that when enabled makes all windows not on
the primary monitor be visible on all workspaces (i.e. not part of the
workspace switching handling).
https://bugzilla.gnome.org/show_bug.cgi?id=609258
Sometimes on_all_workspaces is requested by the client/user, and sometimes
its calculated implicitly due to internal state. We split this up so that
we know when the user has explicitly asked for sticky window, when e.g.
setting wmspec properties or storing session info.
on_all_workspaces means this window is visible on all workspaces.
on_all_workspaces_requested, means the user explicitly made the window
sticky somehow (via imported session, _NET_WM_STATE from another wm,
toggled in the window menu, etc). It always implies on_all_workspaces is
TRUE.
Right now the only time we set on_all_workspaces is for override-redirect
windows, but later we can add a "windows on non-primary monitor are not
part of the workspace switching" feature.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
Until the actor is destroyed, we need to have access to the
MetaWindow to access some fields used for painting. Keep a strong
reference to the window rather than just hoping the window will
not be freed.
https://bugzilla.gnome.org/show_bug.cgi?id=642787
We don't actually use the full xrandr to get the primary monitor, we
just rely on the xrandr xinerama compat code to return the primary
monitor first. This lets us avoid adding unnecessary xrandr code and
avoids issues with _NET_WM_FULLSCREEN_MONITORS monitor indexes being
defined wrt xinerama monitor index order.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
The latter move method will place the window by the origin of the
enclosing window decoration/frame, while the former will place by the
origin of the inner window, itself.
(Also moved meta_window_showing_on_its_workspace comment into
gtk-doc)
https://bugzilla.gnome.org/show_bug.cgi?id=642355
When reload_net_wm_state() is called at startup to read the initial
value of _NET_WM_STATE, it was calling recalc_window_type(), but not
recalc_features(), which meant that, eg, meta->skip_taskbar would
never get initialized from meta->wm_state_skip_taskbar, which meant
that next time mutter went to update the window's _NET_WM_STATE, it
would overwrite the app-specified initial values. Fix that.
(In metacity, this bug is masked by the fact that recalc_features()
gets called when reading the intial value of WM_NORMAL_HINTS, which
comes after _NET_WM_STATE in metacity's prop_hooks_table. In mutter,
the table got reordered at some point, exposing the bug.)
https://bugzilla.gnome.org/show_bug.cgi?id=624360
If mutter is going to be a "real" library, then it should install its
includes so that users can do
#include <meta/display.h>
rather than
#include <display.h>
So rename the includedir accordingly, move src/include to src/meta,
and fix up all internal references.
There were a handful of header files in src/include that were not
installed; this appears to have been part of a plan to keep core/,
ui/, and compositor/ from looking at each others' private includes,
but that wasn't really working anyway. So move all non-installed
headers back into core/ or ui/.
https://bugzilla.gnome.org/show_bug.cgi?id=643959
Move all of the mutter code into a new libmutter-wm.so, split its
main() method into meta_get_option_context(), meta_init() and
meta_run(), add methods for using in-process plugins, and add
libmutter-wm.pc pointing to the new library.
The mutter binary is now just a tiny program that links against
libmutter-wm. The --version and --mutter-plugins options are handled
at the mutter level, not in libmutter-wm, and a few strange unused
command-line options (--no-force-fullscreen and --no-tab-popup) have
been removed.
https://bugzilla.gnome.org/show_bug.cgi?id=643959
meta_restart() was broken, in that it restarted mutter with what was
left of argv after GOption and Clutter had possibly modified it.
Rather than try to fix this, just remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=643959
Revert the early_initialize changes (which get in the way in the
"libmutter-wm" paradigm), remove the GConf key for setting plugins,
and remove plugin "params", which weren't being used. Also remove all
the logic for unloading and reloading plugins, since the list never
changes after startup now.
https://bugzilla.gnome.org/show_bug.cgi?id=643959
This changes the introspection configure flag from
--with/--without-introspection to --enable/--disable-introspection,
and changes it so that trying to enable introspection when g-i is not
installed results in an error, rather than being silently ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=643959
It looks amazingly lame if we simply call exit() during logout. While
it's true that for applications that use XSMP, gnome-session will
close them before us, that doesn't do anything for non-XSMP apps,
which we really hope is the common case.
Instead, we just go away when the X server does.
https://bugzilla.gnome.org/show_bug.cgi?id=643437
For GNOME Shell, we need to grab our DBus names *before* we talk XSMP.
gnome-session takes our XSMP connection as "I'm ready", and starts
running all the other random crud that people dropped in as autostart
files. But for example, we need to have claimed
org.freedesktop.Notifications before a lot of said crud starts.
This requires a plugin API version bump.
Misc: Move handling of --version way earlier in main() where
it should be; no point having it wedged after plugin handling.
If we handle a key event then passing it to GTK+ as well can only
cause confusion. Normally GTK+ would do nothing with a key event for
some window it doesn't know about, but plugins might be doing more
things with the GTK+ event queue.
https://bugzilla.gnome.org/show_bug.cgi?id=642426
If a plugin was explicitly specified, falling back to the default
silently is bad; a manager component like gnome-session can
do a better job of handling this scenario.
An example we've hit in gnome-shell is where SpiderMonkey changes
without gjs being rebuilt, and loading the plugin fails due to
unresolved symbols.
But there are obviously others, like the file being missing or
corrupt.
https://bugzilla.gnome.org/show_bug.cgi?id=641384
Similar to the recently added 'size-changed' signal, we may want to do
something in response to a window being repositioned without waiting for
notify::allocation. (Especially since what we can do in notify::allocation
is severely limited by Clutter forbidding queueing an allocation at that
point.)
https://bugzilla.gnome.org/show_bug.cgi?id=641310
If we are previewing hidden windows, we might be previewing them in a context
like a thumbnail view of a workspace where we care about positioning. So, instead
of waiting until the window is first actually shown to place it, if
live_hidden_previews is set, place the window window when we first compute its
visibility, even if we don't end up showing it.
https://bugzilla.gnome.org/show_bug.cgi?id=641309
A plugin that does workspace management on its on may want to set the
workspace layout without having to deal with putting a property
on the root window to be read back and parsed.
Add meta_screen_override_window_layout() that allows the same types
of layouts as _NET_DESKTOP_LAYOUT but without setting a property.
https://bugzilla.gnome.org/show_bug.cgi?id=640552
A logic bug was resulting in the bottom hidden window (hidden means means
minimized or on a different workspace) continually being stacked above
the other hidden windows.
https://bugzilla.gnome.org/show_bug.cgi?id=640679
When we delete a workspace before the active workspace, we need
to upate the _NET_CURRENT_DESKTOP since the active workspace index
changes. To do this workspace.c:set_active_space_hint() is moved
to screen.c:meta_screen_set_active_workspace_hint() so that it
can be shared.
https://bugzilla.gnome.org/show_bug.cgi?id=640581
Emit a signal when the window size changes. While it is already
possible to connect to notify::allocation (or width/height), the
new signal is emitted outside a clutter allocation cycle, which
makes it more convenient when adjusting an actor's size/position
in response.
On gcc-4.4 (void)<expr> doesn't suppress warnings from
__attribute__((warn_unused_result)), so use
G_GNUC_UNUSED (which expands to __attribute__((unused))) instead
of removing a dummy variable.
https://bugzilla.gnome.org/show_bug.cgi?id=640508
As the tile preview is shown or hidden when a window is dragged
around, it may stick around if the drag operation is cancelled.
Make sure that the preview is hidden in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=639988
Drag operations may be cancelled, in which case the dragged window
should be restored to the position/state it had when the drag was
initialized. In order to do this for tiled states, the original
state has to be saved during the operation.
https://bugzilla.gnome.org/show_bug.cgi?id=639988
The previous tiling state of a grabbed window should be restored
if the drag operation is cancelled (by hitting the Escape key).
This might involve to meta_window_tile(), so export the function
in window-private.h.
https://bugzilla.gnome.org/show_bug.cgi?id=639988
GtkStyle has been deprecated in favor of GtkStyleContext. A full
port would involve replacing GdkColor with GdkRGBA - leave this
out for the time being.
Bump the required version of GTK+.
https://bugzilla.gnome.org/show_bug.cgi?id=637761
We want switching between the windows of an application to be an easily
accessible operation. The convenient and memorable keybinding is the
key above the tab key - but the keysym for that key isn't consistent
across different keyboard layouts.
Add code that figures out the key from the XKB geometry and a magic
keysym name "Above_Tab" that refers to this key and switch
the default binding for cycle_group to <Alt>Above_Tab. (This will
have no effect for the normal case of getting the key binding from
GConf until this patch is applied to Metacity as well.)
https://bugzilla.gnome.org/show_bug.cgi?id=635569
It may be desirable for theme authors to treat side-by-side tiled
windows differently, for instance to give the edge-touching border
a width of 0, so add additional frame states for tiled windows.
https://bugzilla.gnome.org/show_bug.cgi?id=637330
With the existing background functions, single buttons can not be
styled separately - on the left side, the style of the left button
is picked, and the right button's style on the right side.
As theme authors may want to add rounded corners to button groups
as a whole, it makes sense to treat the case of a single button in
a group differently.
https://bugzilla.gnome.org/show_bug.cgi?id=635683
When validating button functions and frame styles, the required
format version of the features used in the theme was compared to
the major version number of the supported format, limiting additions
to major theme format bumps.
Use peek_required_version() instead, so the minor version number
of the supported theme format is taken into account.
https://bugzilla.gnome.org/show_bug.cgi?id=635683
While the configured layout is taken into account for positioning
the buttons, the mapping from button function states to button
position states just assumed the default button layout in LTR
locales.
Do a proper mapping depending on the actual layout instead.
https://bugzilla.gnome.org/show_bug.cgi?id=635686
This patch removes the ability to disable compositing in mutter. As
clutter compositing was the reason for the fork from metacity, turning
compositing off does not make sense.
https://bugzilla.gnome.org/show_bug.cgi?id=626875
To deal with reentrancy from compositor plugins doing things like
moving windows between workspaces in an effect callback, update
the visible_to_compositor flag before calling into the compositor.
https://bugzilla.gnome.org/show_bug.cgi?id=613124
When a compositor is present, we keep the visibility state of the
compositor windows in sync with window->visible_to_compositor. We need
to do the same when enabling the compositor.
https://bugzilla.gnome.org/show_bug.cgi?id=613124
* GL_TEXTURE_RECTANGLE_ARB not avaliable
* clutter_glx_texture_pixmap_using_extension / CLUTTER_GLX_TEXTURE_PIXMAP not avaliable
Signed-off-by: Andreas Mueller <schnitzeltony@gmx.de>
Commit 2c8c1c6df49 in gtk+ removed gdk_display_get_core_pointer().
The equivalent functionality can be achieved by using the
GdkDeviceManager to retrieve the client pointer device.
Maximized tiled windows end up with an inconsistent tile mode when
unmaximized by other means than dragging the window free (e.g.
using the unmaximize button or double clicking the title bar), so
reset the tile mode when unmaximizing.
This is not a problem for side-by-side tiling, as there are no
alternatives to dragging the window free.
When a tiled window is maximized (e.g. by clicking the title bar
button), unmaximizing the window restores the tiled state. While
this is reasonable for side-by-side tiling, it is confusing for
"maximize" tiled windows, as unmaximization has no visible effect.
Change unmaximize to only restore the tiled state of side-by-side
tiled windows.
The original patch triggered "maximize" when the window was dragged
to the top, so that the pointer was below or on the monitor edge and
above the work area's top.
If there's no chrome at the top of the monitor, so that monitor edge
and work area top fall together, the pointer cannot be moved above
the work area's top, so tiling was not triggered.
GTK is about to clean up its code and remove duplicate macros and
GdkDrawable usage. To prepare for that landing, we use the future-safe
versions of the same calls.
https://bugzilla.gnome.org/show_bug.cgi?id=636302
The old behavior of being able to shake loose a maximized window
overlaps with and is for the most part superceded by top edge tiling.
This commit changes the code to only enable shake loose behavior
when edge tiling is disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
In addition to the existing side-by-side tiling modes, this commit
adds a new "maximize" tiling mode. It allows the user to maximize
their windows (in other words, tile with the edge panels) by dragging
their window to the top edge of the monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
The meta_window_handle_mouse_grab_op_event function ensures
the tile_mode variable is in a consistent state after a drag
op is finished.
The way this is current done is:
if (!window->maximized_vertically &&
window->tile_mode != META_TILE_NONE)
window->tile_mode = META_TILE_NONE;
While valid, it doesn't "read" as well as using the
META_WINDOW_TILED_SIDE_BY_SIDE macro, since the macro is specifically
about side-by-side tiling.
This commit just changes things to use the macro and to not bother
checking the tile mode (since if we just reset it anyway, then it doesn't
matter if the value is right or wrong to begin with).
https://bugzilla.gnome.org/show_bug.cgi?id=630548
Currently, the new tiling feature, supports side-by-side, horizontal
tiling when dragging windows to one of the vertical edges of a monitor.
Other types of tiling (on other monitor edges) are potentially useful,
though.
This commit renames the preference from side_by_side_tiling to
edge_tiling.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
A direction parameter is passed to meta_compositor_switch_workspace(),
to indicate the direction of the switch depending on the workspace
layout.
In contrast to the switcher popup, this parameter does not take the
text direction of the locale into account. Change this, so that the
workspace switching animations move in the correct direction.
https://bugzilla.gnome.org/show_bug.cgi?id=636083
overlay_key_combo needs the same treatment as other keycodes on a
change - we should always recompute it if we have a keysym not
a keycode, and not only if the keycode hasn't already been
computed.
Simplify the keymap loading logic by unifying the different
branches; in the reorganization this patch fixes a bug where when
we got a MappingKeyboard event we wouldn't update virtual modifiers
correctly.
Based on a patch by Thomas Thurman <tthurman@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=565540
* Select for XKB keyboard notification events explicitly; since GTK+
has selected for XKB events, delivery of old-school MappingNotify
events is disabled.
* Fix a bug where once a keycode was loaded for a key binding,
it would never be reassigned; we want to laod new keycodes for
all bindings that have a key symbol rather than a fixed
keycode.
[ With fixes from Owen W. Taylor <otaylor@fishsoup.net> ]
https://bugzilla.gnome.org/show_bug.cgi?id=565540
Protect against shape_region or bounding_region being NULL in check_needs_shadow.
This can happen for short lived windows and result into a crash.
https://bugzilla.gnome.org/show_bug.cgi?id=635421
Since we aren't depending on Clutter 1.5 or using the new
CoglPipeline name elsewhere, we need to stick to the old
COGL_MATERIAL_WRAP_MODE_* names, which are provided with
compatibility defines in Clutter 1.4.
Pointed out by Rico Tzschichholz
If we have repeats on for a full-sized image, then if the background
is displayed scaled (for example, in a desktop preview mode) then we
can get artifacts along the edge of the background where the repeat
of the opposite edge is blended in by bilinear scaling. So turn off
repeats when the screen and background image sizes match.
https://bugzilla.gnome.org/show_bug.cgi?id=634833
Add code to track and draw the root window background. The advantage of doing
it here as compared to in a plugin is that we can use the visiblity smarts
of MetaWindowGroup to optimize out drawing the background when obscured.
If handling other than tracking the _XROOTPMAP_ID property is desired in the
future, more functionality like setting the background from a file or doing
cross-fades can be added.
The new background actor is exposed to plugins via meta_plugin_get_background_actor()
similar to other exposed actors to allow cloning the background for use in
other displays. The actual class is not installed for public consumption at
the moment since it has no useful methods.
https://bugzilla.gnome.org/show_bug.cgi?id=634833
Create new cogl-utils.[ch] and move a helper function from
MetaShadowFactory there as meta_create_texture_material(); this
allows us to create single-layer materials from different parts of
Mutter and have them share the same template material.
Also expose a function for creating a 1x1 texture of a given
color meta_create_color_texture_4ub().
https://bugzilla.gnome.org/show_bug.cgi?id=634833
When in a partial stage paint, we can combine that with the visibility
information in MetaWindowGroup to further eliminate unneeded drawing.
Since there is no current Clutter API to access the current clip,
drop to using GL directly.
https://bugzilla.gnome.org/show_bug.cgi?id=634779
This is just a microptimization, as we pretty much always use
TFP (and do the check every time we set a pixmap),
we can let gcc generate better code here.
https://bugzilla.gnome.org/show_bug.cgi?id=633002
For various reasons (mostly the stack tracker correctly predicting the
stacking order before getting events, but also because of the processing
that the compositor does to get the actor stacking order) the compositor
can be told to sync the stack when it has nothing to do. Detect this
at the last moment before actually telling Clutter to restack to avoid
triggering unnecessary redraws.
https://bugzilla.gnome.org/show_bug.cgi?id=634771
Since we can't distinguish a ConfigureEvent that indicates a raise
from a ConfigureEvent that indicates a move, we get lots of
STACK_OP_RAISE_ABOVE events for windows that are already in the
right place in the stacking order. Avoid queueing a restack in that
case.
https://bugzilla.gnome.org/show_bug.cgi?id=634771
Fullscreen and maximized windows never have visible shadows - the only
case where we would ever see them is if they bleed onto an adjacent
monitor and that looks bad.
It's small performance win to avoid computing them, and this also avoids
painting the top shadow for all maximized windows in GNOME Shell - since
the top panel isn't a X window, it doesn't factor into the computation
of what parts of windows are visible and maximized windows are computed
as having a top shadow.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
These functions duplicate existing properties; they are added for
convenience and to avoid the GObject property code on some
performance critical painting paths.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
Instead of making optimizing obscured shadows an all-or-none operation,
pass the clip region to meta_shadow_paint() and only paint the 9-slices
that are at least partially visible.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
Instead of setting shadow parameters on individual windows, add the
idea of a "shadow class". Windows have default shadow classes based
on their frame and window type, which can be overriden by setting
the shadow-class property.
Each shadow class has separably configurable parameters for the
focused and unfocused state. New shadow classes can be defined with
arbitrary names.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
Frame types will form the bases of shadow classes, which are strings,
so export the to-string function so that we can do the conversion
uniformly.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
The basic MetaShadowFactory type is moved to a public header, while
the functions to fetch and paint shadows are kept private.
The public object will be used for configuration of shadows by
plugins.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
For attached modal dialogs, we want the shadow to fade out at the top
as if the window was glued to the parent at the top. Add a
shadow-top-fade property to MetaWindowActor and the corresponding
parameter to meta_shadow_factory_get_shadow().
The internal implementation of MetaShadow is adjusted to work
in terms of an "inner border" and "outer border" instead of doing
the calculations in terms of an aggregate border and the spread
of the shadow. The old way of doing things gets clumsy when the
top_fade distance is added in as well.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
Add a new frame type META_FRAME_TYPE_ATTACHED which is used for
attached modal dialogs.
The theme format version is bumped to 3.2, and attached windows
can have borders defined in a metacity-theme-3.xml as:
<window version=">= 3.2" type="attached" style_set="[name]"/>
If no style is defined for "attached", drawing will fall back
to the "border" type.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
The current shadow code just uses a single fixed texture (the Gaussian
blur of a rectangle with a fixed blur radius) for drawing all window
shadows. This patch adds the ability
* Implement efficient blurring of arbitrary regions by approximating
a Gaussian blur with multiple box blurs.
* Detect when multiple windows can use the same shadow texture by
converting their shape into a size-invariant MetaWindowShape.
* Add properties shadow-radius, shadow-x-offset, shadow-y-offset,
shadow-opacity to allow the shadow for a window to be configured.
* Add meta_window_actor_paint() and draw the shadow directly
from there rather than using a child actor.
* Remove TidyTextureFrame, which is no longer used
https://bugzilla.gnome.org/show_bug.cgi?id=592382
\fBmutter\fP configuration can be found under \fIPreferences\fP->\fIWindows\fP and \fIPreferences\fP->\fIKeyboard Shortcuts\fP on the menu-panel. Advanced configuration can be achieved directly through gconf editing (gconf-editor or gconftool-2).
\fBmutter\fP configuration can be found under \fIPreferences\fP->\fIWindows\fP and \fIPreferences\fP->\fIKeyboard Shortcuts\fP on the menu-panel. Advanced configuration can be achieved directly through gsettings.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
