The comment says that we're going to load textures in a loop until we
still have work to do, or if one iteration took more than 5
milliseconds, to avoid blowing up our frame budget, but the check is for
5 seconds, which is hardly a sensible value.
Since Cogl has started restricting what cogl 1.x api is exposed when
COGL_ENABLE_EXPERIMENTAL_2_0_API is defined and since we build all
Clutter internals with COGL_ENABLE_EXPERIMENTAL_2_0_API defined this
patch makes a first pass at reducing our internal use of the Cogl 1.x
api.
The most notable api that's no longer exposed to us internally is
the cogl_material_ api so this switches all Clutter internals to use the
cogl_pipeline_ api instead. This patch also makes quite a bit of
progress removing internal uses of CoglHandle although there is still
more to go.
All of the pipelines used for ClutterTexture actors share a common
pipeline ancestor created with cogl_pipeline_copy. Previously this
ancestor had a dummy 1x1 texture attached to it so that it would end
up with the same state as the child pipelines that will render with a
texture. Cogl now has a mechanism to specify that a texture will be
used with a pipeline layer without having to create an actual texture.
This patch makes it use that to avoid having an unused texture.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
The YUV support depends on the driver support, and not only not many
drivers support YUV natively: the supported colorspaces are pretty much
useless.
The proper way to do YUV to RGB colorspace conversion on the GPU is to
use a fragment shader; for that, ClutterTexture and Cogl provide enough
API to achieve a good result - see the Clutter-GStreamer implementation,
for instance.
The clutter_get_timestamp() output depends on whether Clutter was
compiled with debugging support — it's meant to be used only by the
debugging notes, and it should not be used for anything else.
The static initializer for GMutex has been removed from GLib.
The g_thread_supported() call can also be removed: threading is always
enabled in GLib ≥ 2.31.
The asynchronous loading code could do with some modernization.
First of all, we should drop the internal GMutex held when manipulating
the boolean flags: it's far too expensive for its role, and modern GLib
provides us with bitlocks that are quite a lot faster.
Then we should consolidate most of the implementation into something
smaller and more manageable.
ClutterTexture relies too much on GError, even for things that are
clearly programmer errors. Also, no error message passed to GError
is marked for translation as it should.
We should move the programmer errors, like passing the wrong bpp
value with regards to the presence of the alpha channel, to real
warnings; we should also try and harmonize all the error messages,
and not mention Cogl — especially in the ones marked for translation.
Although this patch doesn't make them public, it documents the
_clutter_actor_get/apply_relative_transform_matrix functions so they
could easily be made public if desired. I think these API could be
useful to have publicly, and I originally documented them because I
thought they would be needed in the MX toolkit.
On reviewing the clutter-actor.c code using
_apply_modelview_transform_recursive I noticed various comments stating
that it will never call the stage's ->apply_transform vfunc to transform
into eye coordinates, but actually looking at the implementation that's
not true. The comments probably got out of sync with an earlier
implementation that had that constraint. This removes the miss-leading
comments and also updates various uses of the api where we were manually
applying the stage->apply_transform.
This adds a virtual to ClutterActor so that an actor subclass can
report whether it has overlapping primitives. ClutterActor uses this
to determine whether it needs to use ClutterFlattenEffect to implement
the opacity property. The default implementation of the virtual
returns TRUE which means that most actors will end up being redirected
offscreen when the opacity != 255. ClutterTexture and ClutterRectangle
override this to return FALSE because they should never need to be
redirected. ClutterClone overrides it to divert to the source.
The values for the ClutterOffscreenRedirect enum have changed to:
AUTOMATIC_FOR_OPACITY
The actor will only be redirected if has_overlaps returns TRUE and
the opacity is < 255
ALWAYS_FOR_OPACITY
The actor will always be redirected if the opacity < 255 regardless
of the return value of has_overlaps
ALWAYS
The actor will always be redirected offscreen.
This means that the property can't be used to prevent the actor from
being redirected but only to increase the likelihood that it will be
redirected.
ClutterActor now adds and removes the flatten effect depending on
whether flattening is needed directly in clutter_actor_paint(). There
are new internal versions of add/remove_effect that don't queue a
redraw. This means that ClutterFlattenEffect is now just a no-op
subclass of ClutterOffscreen. It is only needed because
ClutterOffscreen is abstract. Removing the effect also makes it so
that the cached image will be freed as soon as an actor is repainted
without being flattened.
The shader stack held by ClutterMainContext should only be accessed
using functions, and not directly.
Since it's a stack, we can use stack-like operations: push, pop and
peek.
Telling the user about files not found when loading a ClutterScript with
ClutterTextures in it is very useful and can save a few minutes (or
hours) of frustation because it "does not work".
All the nifty things you discover when translating strings not exposed
to anyone. First the clutter-wide record of the number of typos in one
string. Second, ClutterTexture happened to have the only property blurbs
ending with a '.', remove them.
There are too many examples where the default assumption that an actor
paints inside its allocation isn't true, so we now return FALSE in the
base implementation instead. This means that by default we are saying
"we don't know the paint volume of the actor", so developers need to
implement the get_paint_volume virtual to take advantage of culling and
clipped redraws with their actors.
This patch provides very conservative get_paint_volume implementations
for ClutterTexture, ClutterCairoTexture, ClutterRectangle and
ClutterText which all explicitly check the actor's object type to avoid
making any assumptions about subclasses.
When clutter_texture_new_from_actor is use we need to track when the
source actor queues a redraw or a relayout so we can also queue a redraw
or relayout for the texture actor.
This is a fairly extensive second pass at exposing paint volumes for
actors.
The API has changed to allow clutter_actor_get_paint_volume to fail
since there are times - such as when an actor isn't a descendent of the
stage - when the volume can't be determined. Another example is when
something has connected to the "paint" signal of the actor and we simply
have no way of knowing what might be drawn in that handler.
The API has also be changed to return a const ClutterPaintVolume pointer
(transfer none) so we can avoid having to dynamically allocate the
volumes in the most common/performance critical code paths. Profiling was
showing the slice allocation of volumes taking about 1% of an apps time,
for some fairly basic tests. Most volumes can now simply be allocated on
the stack; for clutter_actor_get_paint_volume we return a pointer to
&priv->paint_volume and if we need a more dynamic allocation there is
now a _clutter_stage_paint_volume_stack_allocate() mechanism which lets
us allocate data which expires at the start of the next frame.
The API has been extended to make it easier to implement
get_paint_volume for containers by using
clutter_actor_get_transformed_paint_volume and
clutter_paint_volume_union. The first allows you to query the paint
volume of a child but transformed into parent actor coordinates. The
second lets you combine volumes together so you can union all the
volumes for a container's children and report that as the container's
own volume.
The representation of paint volumes has been updated to consider that
2D actors are the most common.
The effect apis, clutter-texture and clutter-group have been update
accordingly.
Previously we used the transformed allocation but that doesn't take
into account actors with depth which may be projected outside the
area covered by the transformed allocation.
If set_cogl_texture() is called after unsetting the Texture's material
then we really want to make a copy of the template.
Also, we should assert more often if the internal state goes horribly
wrong: at least, we'll have a backtrace.
When building actor relative transforms, instead of using the matrix
stack to combine transformations and making assumptions about what is
currently on the stack we now just explicitly initialize an identity
matrix and apply transforms to that.
This removes the full_vertex_t typedef for internal transformation code
and we just use ClutterVertex.
ClutterStage now implements apply_transform like any other actor now
and the code we had in _cogl_setup_viewport has been moved to the
stage's apply_transform instead.
ClutterStage now tracks an explicit projection matrix and viewport
geometry. The projection matrix is derived from the perspective whenever
that changes, and the viewport is updated when the stage gets a new
allocation. The SYNC_MATRICES mechanism has been removed in favour of
_clutter_stage_dirty_viewport/projection() APIs that get used when
switching between multiple stages to ensure cogl has the latest
information about the onscreen framebuffer.
Creating new materials for every Texture instance results in a lot of
ARBfp programs being generated/compiled. Since most textures will just
be similar we should create a template material for all of them, and
then copy it in every instance. Cogl will try to optimize the generation
of the program and, hopefully, will reuse the same program most of the
time.
With this change, a simple test shows that loading 48 textures will
result in just two programs being compiled - with and without batching
enabled.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2295
The expectation is that actors should call clutter_actor_queue_redraw
when ever some private state changes that affects painting *or* picking.
ClutterTexture was not doing this for pick_with_alpha property changes.
This adds a wrapper macro to clutter-private that will use
g_object_notify_by_pspec if it's compiled against a version of GLib
that is sufficiently new. Otherwise it will notify by the property
name as before by extracting the name from the pspec. The objects can
then store a static array of GParamSpecs and notify using those as
suggested in the documentation for g_object_notify_by_pspec.
Note that the name of the variable used for storing the array of
GParamSpecs is obj_props instead of properties as used in the
documentation because some places in Clutter uses 'properties' as the
name of a local variable.
Mose of the classes in Clutter have been converted using the script in
the bug report. Some classes have not been modified even though the
script picked them up as described here:
json-generator:
We probably don't want to modify the internal copy of JSON
behaviour-depth:
rectangle:
score:
stage-manager:
These aren't using the separate GParamSpec* variable style.
blur-effect:
win32/device-manager:
Don't actually define any properties even though it has the enum.
box-layout:
flow-layout:
Have some per-child properties that don't work automatically with
the script.
clutter-model:
The script gets confused with ClutterModelIter
stage:
Script gets confused because PROP_USER_RESIZE doesn't match
"user-resizable"
test-layout:
Don't really want to modify the tests
http://bugzilla.clutter-project.org/show_bug.cgi?id=2150
If a Texture has been set to:
• keep its size synchronized with the image data
• maintain the aspect ratio of the image data
then it should also change its request mode depending on the orientation
of the image data, so that layout managers have a fighting chance of
sizing it correctly.
