Commit Graph

3001 Commits

Author SHA1 Message Date
Neil Roberts
f4ee7dc0e1 clutter-color: Don't directly read the contents of GValue structs
The code for implementing ClutterColor as GParamSpec and the
color↔string transformation functions were assuming that ClutterColor
owns the data in the GValue struct and directly reading
data[0].v_pointer to get a pointer to the color. However ClutterColor
is actually a boxed type and the format of the data array is meant to
be internal to GObject so it is not safe to poke around in it
directly. This patch changes it to use g_value_get_boxed to get the
pointer.

Also, boxed types allow a NULL value to be stored and not all of the
code was coping with this. This patch also attempts to fix that.

http://bugzilla.openedhand.com/show_bug.cgi?id=2068
2010-05-05 18:49:09 +01:00
Neil Roberts
fa1638c0ab clutter-color: Remove the value table
ClutterColor has long had a GTypeValueTable struct around and the
functions defined to be implemented as a fundamental type. However the
struct was never actually used anywhere and ClutterColor is actually
defined as a boxed type. This patch removes the table because it is
very confusing to have code lying around that is not used.

http://bugzilla.openedhand.com/show_bug.cgi?id=2068
2010-05-05 18:49:09 +01:00
Øyvind Kolås
452cb1abbf animator: fix looping when doing cubic interpolation
When using interpolation and the last key is not at 1.0 a bouncing
artifact could be observed after the keys.
2010-05-05 18:24:53 +01:00
Øyvind Kolås
e4089efb4c animator: only keys that are removed due to actors disappearing are inert 2010-05-05 18:24:53 +01:00
Øyvind Kolås
0f8ca38e59 animator: refactoring
renamed KeyAnimator to PropertyIter
2010-05-05 18:24:53 +01:00
Øyvind Kolås
8afb091f56 animator: retain ease-in/interpolation when changing first key
Duplicate the existing ease-in/interpolation mode for the property when
removing, replacing the first key for a property or adding a new first
key for a property.
2010-05-05 18:24:53 +01:00
Øyvind Kolås
d45395d78b animator: fix crash when setting keys on running animator
When inserting or modifying keys of a running animator the internal
iterators per property could go out of sync. Reinitializing the
iterators if the timeline is running avoids this.
2010-05-05 18:24:53 +01:00
Neil Roberts
0ff02d18d2 gles: Fix the functions names for the GL_OES_framebuffer_object ext
In 91cde78a7 I accidentally changed the function names that get looked
up for the framebuffer extension under GLES so that they didn't have
any suffix. The spec for extension specifies that they should have the
OES suffix.
2010-05-05 12:24:11 +01:00
Owen W. Taylor
d8e1bd989c Ignore unexpected GLX_BufferSwapComplete
A server that supports GLX_BufferSwapComplete will always send
these events, so we should just silently ignore them if we've
chosen not to take advantage of the INTEL_swap_event GLX
extension.

http://bugzilla.openedhand.com/show_bug.cgi?id=2102

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-05-05 12:00:40 +01:00
Emmanuele Bassi
33642757f5 animation: Use 'guint' for set_duration() parameter
The :duration property and the get_duration() method use unsigned int,
but the setter using a signed integer for no apparent reason.

http://bugzilla.openedhand.com/show_bug.cgi?id=2089
2010-05-05 11:32:39 +01:00
Jussi Kukkonen
0835e27380 container: use CLUTTER_IS_ACTOR on correct parameter
clutter_container_create_child_meta() uses CLUTTER_IS_ACTOR on the
container parameter instead of the actor parameter.

http://bugzilla.openedhand.com/show_bug.cgi?id=2087

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-05-05 11:31:14 +01:00
Damien Lespiau
71f942d03a debug: Use G_UNLIKELY in the tests
Debugging code is not meant to be run in the nominal code path. Use
G_UNLIKELY to be reduce the number of bubbles in the instruction
pipeline.

Took the opportunity to re-indent the macros.
2010-05-04 17:01:14 +01:00
Owen W. Taylor
f9072b8663 Call backend handle_event from clutter_x11_handle_event()
Whether events come from the main loop source or from
clutter_x11_handle_event(), we need to feed them to the backend
virtual handle_event function. This fixes problems with clients
using clutter_x11_handle_event() hanging because
GLXBufferSwapComplete events aren't received.

http://bugzilla.openedhand.com/show_bug.cgi?id=2101
2010-05-04 11:04:03 +01:00
Robert Bragg
d6dbd62021 debug: wrap glClear calls with the GE macro
This adds a GE macro wrapper around our calls to glClear so we can
print a warning for any errors reported by the driver.
2010-04-30 12:10:16 +01:00
Neil Roberts
e477768bd8 cogl-texture-2d-sliced: Use the converted bitmap when uploading
When uploading texture data the cogl-texture-2d-sliced backend was
using _cogl_texture_prepare_for_upload to create a bitmap suitable for
upload but then it was using the original bitmap instead of the new
bitmap for the data. This was causing any format conversions performed
by cogl_texture_prepare_for_upload to be ignored.

http://bugzilla.openedhand.com/show_bug.cgi?id=2059
2010-04-29 13:15:36 +01:00
Neil Roberts
405d529f44 cogl-texture: Don't attempt to use GL to convert formats under GLES
In commit abe91784c4 I changed cogl-texture so that it would use the
OpenGL mechanism to specify a different internal texture format from
the image format so that it can do the conversion instead of
Cogl. However under GLES the internal format and the image format must
always be the same and it only supports a limited set of formats. This
patch changes _cogl_texture_prepare_for_upload so that it does the
conversion using the cogl bitmap code when compiling for GLES.

http://bugzilla.openedhand.com/show_bug.cgi?id=2059
2010-04-29 13:15:35 +01:00
Neil Roberts
8530b7946a cogl-material: Fix the check to prevent using too many layers
There was a check at the bottom of the loop which sets up the state
for each of the layers so that it would break from the loop when the
maximum number of layers is reached. However after doing this it would
not increment 'i'. 'i' is later used to disable the remaining layers
so it would end up disabling the last layer it just set up.

This patch moves the check to be part of the loop condition so that
the check is performed after incrementing 'i'.

http://bugzilla.openedhand.com/show_bug.cgi?id=2064
2010-04-29 12:15:17 +01:00
Neil Roberts
3c2bb33cbd cogl-material: Fix the warning for when too many layers are used
The warning displayed when too many layers are used had an off-by-one
error so that it would display even if exactly the maximum number is
used. There was also a missing space at the end of the line in the
message which looked wrong when displayed on the terminal.

http://bugzilla.openedhand.com/show_bug.cgi?id=2064
2010-04-29 12:15:11 +01:00
Emmanuele Bassi
ce261025f6 Fix clutter_event_get_coords() for crossing events
The ClutterCrossingEvent data structure contains the coordinates
of the crossing; they are regularly filed out by Clutter and by
the backend event processing code. And yet clutter_event_get_coords()
returns (0, 0) because it thinks that CLUTTER_ENTER and CLUTTER_LEAVE
events do not have coordinates.
2010-04-28 16:19:37 +01:00
Emmanuele Bassi
b7098563c2 actor: Make consistent use of the name in error reporting
Whenever we are warning inside ClutterActor we prefer the actor's name
to its type, if the name is set. The current code is made less readable
by the use of the ternary operator:

  priv->name != NULL ? priv->name : G_OBJECT_TYPE_NAME (self)

This looks like a job for a simple convenience function.
2010-04-27 10:12:25 +01:00
Emmanuele Bassi
9024cd9f7c Clean up the Texture private data structure 2010-04-26 16:27:15 +01:00
Neil Roberts
a881c8b07e cogl-path: Make cogl_path_arc_rel static
cogl_path_arc_rel was never in any public headers so it isn't part of
the public API. It also has a slightly inconsistent name because the
rest of the relative path functions are called cogl_path_rel_*. This
patch makes it static for now to make it more obvious that it isn't
public. The name has changed to _cogl_path_rel_arc.
2010-04-22 18:17:59 +01:00
Neil Roberts
e16f05326e cogl-path: Add documentation for the angles of cogl_path_arc
This adds documentation for how Cogl interprets the angles given to
cogl_path_arc.
2010-04-22 18:17:59 +01:00
Emmanuele Bassi
73e4d49053 profile: Add profiling points for Text
Add a static timer for the text layout code, and two counters for the
layout cache hit and miss conditions.
2010-04-22 17:54:05 +01:00
Emmanuele Bassi
5608a54708 profile: Fix the report generation
Timers and counters might not exist, so make every section of the
profile report depend on the object that it is querying.

This fixes the profile report generation that was broken by commit
8146d8d08d.
2010-04-22 17:52:13 +01:00
Emmanuele Bassi
05cf570570 actor: Add an internal variant of get_stage()
For internal use we should have a get_stage_internal() variant that
avoids type checks and calls to public functions. The implementation
is trivial enough, and it will avoid (scene graph depth + 1) type
checks and (scene graph depth) function calls.
2010-04-22 16:49:57 +01:00
Emmanuele Bassi
1355c19f66 docs: Fix gtk-doc warnings 2010-04-22 16:39:18 +01:00
Neil Roberts
3196658b8c cogl-path: Fix the truncation when adding to a copied path
If a path is copied and then appended to, the copy needs to have the
last sub path truncated so that it fits in the total path size in case
the original path was modified. However the path size check was broken
so if the copied path had more than one sub path it would fail.
2010-04-21 22:36:43 +01:00
Neil Roberts
abc64a2c67 cogl-clip-stack: Use orientation of the polygon to set clip planes
Previously the clip stack code was trying to detect when the
orientation of the on-screen rectangle had changed by checking if the
order of the y-coordinates on the left edge was different from the
order the x-coordinates on the top edge. This doesn't work for some
rotations which was causing the clip planes to clip the wrong side of
the line. This patch makes it detect the orientation by calculating
the signed area which is a standard computer graphics algorithm.

http://bugzilla.openedhand.com/show_bug.cgi?id=2079
2010-04-21 13:24:59 +01:00
Neil Roberts
7f2b2e1364 cogl-path: Document how a shape is filled
This adds some documentation to cogl_path_fill() describing the fill
rule Cogl uses.
2010-04-21 13:20:23 +01:00
Neil Roberts
44c86fcead cogl-path: Don't try to union sub paths
When drawing a path with only a single sub path, Cogl uses the
'even-odd' fill rule which means that if a part of the path intersects
with another part then the intersection would be inverted. However
when combining sub paths it treats them as separate paths and then
unions them together. This doesn't match the semantics of the even-odd
rule in SVG and Cairo. This patch makes it so that a new sub path is
just drawn as another triangle fan so that it will continue to invert
the stencil buffer. This is also much simpler and more efficient as
well as being more correct.

http://bugzilla.openedhand.com/show_bug.cgi?id=2088
2010-04-21 11:39:28 +01:00
Neil Roberts
78dc59b348 picking: Read the colour value using COGL_PIXEL_FORMAT_RGBA_8888_PRE
In commit c0a553163b I changed the format used to read the picking
pixel to COGL_PIXEL_FORMAT_RGB_888 because it was convenient to avoid
the premult conversion. However this broke picking on GLES on some
platforms because for that glReadPixels is only guaranteed to support
GL_RGBA with GL_UNSIGNED_BYTE. Since the last commit cogl_read_pixels
will always use that format but it will end up with a conversion back
to RGB_888. This patch avoids that conversion and avoids the premult
conversion by reading in RGBA_8888_PRE.

http://bugzilla.openedhand.com/show_bug.cgi?id=2057
2010-04-21 11:34:04 +01:00
Neil Roberts
0cb09cd40d cogl_read_pixels: Always use GL_RGBA/GL_UNSIGNED_BYTE under GLES
Under GLES glReadPixels is documented to only support GL_RGBA with
GL_UNSIGNED_BYTE and an implementation specfic format which can be
fetched with glGet, GL_IMPLEMENTATION_COLOR_READ_FORMAT_OES and
GL_IMPLEMENTATION_COLOR_READ_TYPE_OES. This patch makes it always read
using GL_RGBA and GL_UNSIGNED_BYTE and then convert the results if
neccessary.

This has some room for improvement because it doesn't attempt to use
the implementation specific format. Also the conversion is somewhat
wasteful because there are currently no cogl_bitmap_* functions to
convert without allocating a new buffer so it ends up doing an
intermediate copy.

http://bugzilla.openedhand.com/show_bug.cgi?id=2057
2010-04-21 10:56:21 +01:00
Neil Roberts
9750b90f37 cogl-bitmap: Fix converting formats with and without alpha channels
_cogl_bitmap_convert_format_and_premult was failing when converting
from RGBA to RGB and vice versa. _cogl_bitmap_fallback_convert
converts without altering the premult status so when choosing a new
format it would copy over the premult bit. However, it did this
regardless of whether the new format had an alpha channel so when
converting from RGBA_8888_PRE to RGB_888 it would end up inventing a
new meaningless format which would be RGB_888_PRE. This patch makes it
avoid copying the premult flag if the destination has no alpha. It
doesn't matter if it copies when the source format has no alpha
because it will always be unset.

_cogl_bitmap_convert_format_and_premult was also breaking when
converting from RGBA_8888_PRE to RGB_888 because it would think
RGB_888 is unpremultiplied and try to convert but then
_cogl_bitmap_fallback_premult wouldn't know how to do the conversion.

http://bugzilla.openedhand.com/show_bug.cgi?id=2057
2010-04-21 10:56:21 +01:00
Neil Roberts
a28440eafb clutter-texture: Remove confusing comments about realization
In 125bded81 some comments were introduced to ClutterTexture
complaining that it can have a Cogl texture before being
realized. Clutter always assumes that the single GL context is current
so there is no need to wait until the actor is realized before setting
a texture. This patch replaces the comments with clarification that
this should not be a problem.

The patch also changes the documentation about the realized state in
various places to clarify that it is acceptable to create any Cogl
resources before the actor is realized.

http://bugzilla.openedhand.com/show_bug.cgi?id=2075
2010-04-19 15:34:43 +01:00
Robert Bragg
62ac3b312e glx: handle spurious GLX_BufferSwapComplete events gracefully
Instead of simply aborting we now print out a warning, when a spurious
GLX_BufferSwapComplete event is handled since it seems that people are
coming across the problem (perhaps due to a buggy driver) and making
apps crash in this situation is a bit extreme.
2010-04-19 11:24:42 +01:00
Neil Roberts
716ec82db8 clutter-cairo-texture: Use the new cogl_pixel_buffer API
ClutterCairoTexture now stores the surface image data in a Cogl pixel
buffer object. When clutter_cairo_texture_create is called the buffer
is mapped and a new Cairo surface is created to render directly to the
PBO. When the surface is destroyed the buffer is unmapped and a Cogl
texture is recreated from the buffer. This should enable slightly
faster uploads when using Cairo because it avoids having to copy the
surface data to the texture.

http://bugzilla.openedhand.com/show_bug.cgi?id=1982

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-04-16 13:19:57 +01:00
Emmanuele Bassi
1a1e7d3573 text: Increase the size of the Layout cache
Currently, each ClutterText caches 3 Pango layouts:

  » one for the preferred, unbounded width
  » one for the preferred height for a given width
  » one for the allocated size

Some layout managers do a double pass that could flush the whole cache
before it has a chance of actually storing relevant data, resulting in
a continuous series of misses.

We can try to counteract this by doubling the size of the cache, from
three slots to six. More than six would be pointless, as well as too
memory consuming; but we might get down to a number between 3 and 6 at
any later point.
2010-04-16 12:57:49 +01:00
Rob Bradford
dd407326fe text: Check generated size of layouts in cache
By comparing the requested size against the computed sized for existing
Pango layouts we can avoid creating layouts where the requested size
matches that of a previously computed one.

In particular this optimisation means that when working with a fixed
positioning based layout (with no constraints on the size of the
ClutterText) the same PangoLayout can be used to calculate the preferred
width, height and also the layout used for the actual painting.

http://bugzilla.openedhand.com/show_bug.cgi?id=2078

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-04-16 12:50:35 +01:00
Neil Roberts
708bbc72e1 cogl: Implement retained clip stacks
This adds three new internal API functions which can be used to retain
the clip stack state and restore it later:

 _cogl_get_clip_stack
 _cogl_set_clip_stack
 _cogl_clip_stack_copy

The functions are currently internal and not yet used but we may want
to make them public in future to replace the cogl_clip_stack_save()
and cogl_clip_stack_restore() APIs.

The get function just returns the handle to the clip stack at the top
of the stack of stacks and the set function just replaces it.

The copy function makes a cheap copy of an existing stack by taking a
reference to the top stack entry. This ends up working like a deep
copy because there is no way to modify entries of a stack but it
doesn't actually copy the data.
2010-04-15 14:51:01 +01:00
Neil Roberts
3a58bc440b cogl-clip-stack: Convert to be a CoglHandle
CoglClipStacks can now be reference counted via a CoglHandle. The
ClipClipState now stores handles in the list rather than CoglClipStack
pointers.
2010-04-15 14:51:01 +01:00
Neil Roberts
aba7fb63cb Separate out CoglClipStackState from cogl-clip-stack.c
CoglClipStackState has now been renamed to CoglClipState and is moved
to a separate file. CoglClipStack now just maintains a stack and
doesn't worry about the rest of the state. CoglClipStack sill contains
the code to flush the stack to GL.
2010-04-15 14:51:00 +01:00
Neil Roberts
732223074b cogl-slip-stack: Store clip window rect entries in Cogl coordinates
When glScissor is called it needs to pass coordinates in GL's
coordinate space where the origin is the bottom left. Previously this
conversion was done before storing the window rect in the clip
stack. However this might make it more difficult if we want to be able
to grab a handle to a clip stack and use it in different circumstances
later. This patch moves the coordinate conversion to inside the clip
state flushing code.
2010-04-15 14:50:55 +01:00
Neil Roberts
e9aa5d807c cogl-clip-stack: Store window rect entries as ints not floats
The window rectangles are passed in as integers so there is no point
in converting them to floats when storing a stack entry for them.
2010-04-15 14:50:26 +01:00
Neil Roberts
a0e19c9469 cogl-clip-stack: Use reference counted stack entries
The stack is now stored as a list of reference counted entries.
Instead of using a GList, each entry now contains a link with a
reference to its parent. The idea is that this would allow copying
stacks with a shared ancestry.

Previously the code flushed the state by finding the bottom of the
stack and then applying each entry by walking back up to the top. This
is slightly harder to do now because the list is no longer
doubly-linked. However I don't think it matters which order the
entries are applied so I've just changed it to apply them in reverse
order.

There was also a restriction that if ever the stencil buffer is used
then we could no longer use clip planes for any subsequent entries. I
don't think this makes sense because it should always work as long as
it doesn't attempt to use the clip planes more than once. I've
therefore removed the restriction.
2010-04-15 14:47:01 +01:00
Emmanuele Bassi
15ef549207 docs: Clean up ClutterActor's long description
The Actor's long description is a bit cluttered; it contains a section
on the actor's box semantics, on the transformation order and on the
event handling.

We should use <refsect2> tags to divide the Actor's description into
logically separated sections.

We should also add a section about the custom Scriptable properties that
ClutterActor defines, and the special handling of unit-based properties.
2010-04-14 23:34:38 +01:00
Neil Roberts
1445e9d32d cogl-atlas-texture: Fix a memory leak
The CoglAtlasTexture struct was not being freed in
_cogl_atlas_texture_free so there would be a small leak whenever a
texture was destroyed.

Thanks to Robert Bragg for spotting this.
2010-04-13 17:26:03 +01:00
Neil Roberts
30f43c6cda cogl-material: Use CLAMP_TO_EDGE for WRAP_AUTOMATIC unless overriden
CoglMaterial now sets GL_CLAMP_TO_EDGE if WRAP_MODE_AUTOMATIC is used
unless it is overridden when the material is flushed. The primitives
are still expected to expose repeat semantics so no user visible
changes are made. The idea is that drawing non-repeated textures is
the most common case so if we make clamp_to_ege the default then we
will reduce the number of times we have to override the
material. Avoiding overrides will become important if the overriding
mechanism is replaced with one where the primitive is expected to copy
the material and change that instead.
2010-04-12 15:44:23 +01:00
Neil Roberts
75f1dc90b0 cogl-material: Add support for setting the wrap mode for a layer
Previously, Cogl's texture coordinate system was effectively always
GL_REPEAT so that if an application specifies coordinates outside the
range 0→1 it would get repeated copies of the texture. It would
however change the mode to GL_CLAMP_TO_EDGE if all of the coordinates
are in the range 0→1 so that in the common case that the whole texture
is being drawn with linear filtering it will not blend in edge pixels
from the opposite sides.

This patch adds the option for applications to change the wrap mode
per layer. There are now three wrap modes: 'repeat', 'clamp-to-edge'
and 'automatic'. The automatic map mode is the default and it
implements the previous behaviour. The wrap mode can be changed for
the s and t coordinates independently. I've tried to make the
internals support setting the r coordinate but as we don't support 3D
textures yet I haven't exposed any public API for it.

The texture backends still have a set_wrap_mode virtual but this value
is intended to be transitory and it will be changed whenever the
material is flushed (although the backends are expected to cache it so
that it won't use too many GL calls). In my understanding this value
was always meant to be transitory and all primitives were meant to set
the value before drawing. However there were comments suggesting that
this is not the expected behaviour. In particular the vertex buffer
drawing code never set a wrap mode so it would end up with whatever
the texture was previously used for. These issues are now fixed
because the material will always set the wrap modes.

There is code to manually implement clamp-to-edge for textures that
can't be hardware repeated. However this doesn't fully work because it
relies on being able to draw the stretched parts using quads with the
same values for tx1 and tx2. The texture iteration code doesn't
support this so it breaks. This is a separate bug and it isn't
trivially solved.

When flushing a material there are now extra options to set wrap mode
overrides. The overrides are an array of values for each layer that
specifies an override for the s, t or r coordinates. The primitives
use this to implement the automatic wrap mode. cogl_polygon also uses
it to set GL_CLAMP_TO_BORDER mode for its trick to render sliced
textures. Although this code has been added it looks like the sliced
trick has been broken for a while and I haven't attempted to fix it
here.

I've added a constant to represent the maximum number of layers that a
material supports so that I can size the overrides array. I've set it
to 32 because as far as I can tell we have that limit imposed anyway
because the other flush options use a guint32 to store a flag about
each layer. The overrides array ends up adding 32 bytes to each flush
options struct which may be a concern.

http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-12 15:44:23 +01:00
Neil Roberts
463ebc8220 Split the wrap mode of _cogl_texture_set_wrap_mode into three
GL supports setting different wrap modes for the s, t and r
coordinates so we should design the backend interface to support that
also. The r coordinate is not currently used by any of the backends
but we might as well have it to make life easier if we ever add
support for 3D textures.

http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-12 15:44:23 +01:00