As with GAMMA_LUT, track whether privacy screen state has been pushed to
KMS in the onscreen. This leaves MetaOutput and MetaCrtc to be about
configuration, and not application.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2814>
As with CRTC GAMMA_LUT, we're moving towards making the entity managing
KMS updates aware if there are any changes to be made, and whether KMS
updates are actually needed or not, and for privacy screen changes, this
means we need to communicate whether the privacy screen state is valid
or not. This allows the caller to create any needed MetaKmsUpdate.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2814>
We're moving towards making the entity managing KMS updates aware if
there are any changes to be made, and whether KMS updates are actually
needed or not, and for GAMMA_LUT changes, this means we need to
communicate whether the GAMMA_LUT state is valid or not. This allows the
caller to create any needed MetaKmsUpdate.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2814>
When the pointer crosses monitors, we account for a single motion event
resulting in the pointer moving across more than 2 monitors, in order
to correctly account each monitor scale and the distance traversed
across each monitor in the resulting relative motion vector.
However, memory on the direction is kept short, each iteration to
find the target view just remembers the direction it came from. This
brings a pathological case with 4 monitors with the same resolution
in a 2x2 grid, and a motion vector that crosses monitors at the
intersection of all 4 in a perfect diagonal. (Say, monitors are
all 1920x1080 and pointer moves from 1920,1080 to 1919,1079).
In that case, the intersection point at the crossing between 4
monitors (say, 1920,1080) will be considered to intersect with 2
edges of each view. Since there is always at least 2 directions to
try, the loop will always find the direction other than the one
it came from, and as a result endlessly jump across all 4 possible
choices.
In order to fix this, consider only the global v/h directions,
we already know if the pointer moves left/right or up/down, so
only consider those directions to jump across monitors.
For the case at hand, this will result in three monitors visited,
(either bottomright/bottomleft/topleft, or bottomright/topright/topleft)
with a total distance of 0,0 in the middle one, effectively
resulting in a correct diagonal motion.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2598
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2803>
Refactor code so that variables don't depend the on motion line
content, but the other way around. This makes it clearer what each
vector means.
This has no functional changes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2803>
Commit 4e0ffba5c attempted to fix initialization of keyboard a11y,
but mousekeys do attempt to create a virtual input device at a
time that it is too early to try to create one.
Defer this operation until keyboard devices are added, so that
we are ensured to already have the seat input thread set up.
Fixes: 4e0ffba5c - backends/native: Initialize keyboard a11y on startup
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2778>
This means objects have an owner, where the chain eventually always
leads to a MetaContext. This also means that all objects can find their
way to other object instances via the chain, instead of scattered global
singletons.
This is a squashed commit originally containing the following:
cursor-tracker: Don't get backend from singleton
idle-manager: Don't get backend from singleton
input-device: Pass pointer to backend during construction
The backend is needed during construction to get the wacom database.
input-mapper: Pass backend when constructing
monitor: Don't get backend from singleton
monitor-manager: Get backend directly from monitor manager
remote: Get backend from manager class
For the remote desktop and screen cast implementations, replace getting
the backend from singletons with getting it via the manager classes.
launcher: Pass backend during construction
device-pool: Pass backend during construction
Instead of passing the (maybe null) launcher, pass the backend, and get
the launcher from there. That way we always have a way to some known
context from the device pool.
drm-buffer/gbm: Get backend via device pool
cursor-renderer: Get backend directly from renderer
input-device: Get backend getter
input-settings: Add backend construct property and getter
input-settings/x11: Don't get backend from singleton
renderer: Get backend from renderer itself
seat-impl: Add backend getter
seat/native: Get backend from instance struct
stage-impl: Get backend from stage impl itself
x11/xkb-a11y: Don't get backend from singleton
backend/x11/nested: Don't get Wayland compositor from singleton
crtc: Add backend property
Adding a link to the GPU isn't enough; the virtual CRTCs of virtual
monitors doesn't have one.
cursor-tracker: Don't get display from singleton
remote: Don't get display from singleton
seat: Don't get display from singleton
backend/x11: Don't get display from singleton
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2718>
Add a helper function that ensures any queued virtual input events have
been flushed from the input thread. This works by posting a task to the
input thread, which will itself queue another callback back to the main
thread. Once the main thread callback is invoked, the flush call is
unblocked and the function returns. Upon this, any previously emitted
virtual input event should have already passed through the input thread
back into the main thread, however not necessarily fully processed.
For making sure it has been processed, one also have to make sure the
stage has been updated, e.g. via `meta_wait_for_paint()`.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2727>
On hotplug, the events we receive from the kernel are async, and
connectors in the kernel come and go as they please. In practice, this
means that calling drmModeGetConnector() twice more or less directly
after each other, there is no guarantee that the latter call will return
anything if the former did.
When updating the connector in response to hotplugs, we'd first update
the list of existing connectors, and following that, query each and
every one again for their current state, to update our internal
representation; only the former handled drmModeGetConnector() returning
NULL, meaning if unlucky, we'd end up doing a null pointer dereference
when trying to update the state.
Handle this by querying the kernel for the current connector state only
once per connector, updating the list of connectors and their
corresponding state at the same time.
Fixes the following crash:
#0 meta_kms_connector_read_state at ../src/backends/native/meta-kms-connector.c:684
#1 meta_kms_connector_update_state at ../src/backends/native/meta-kms-connector.c:767
#2 meta_kms_impl_device_update_states at ../src/backends/native/meta-kms-impl-device.c:916
#3 meta_kms_device_update_states_in_impl at ../src/backends/native/meta-kms-device.c:267
#4 meta_kms_update_states_in_impl at ../src/backends/native/meta-kms.c:604
#5 update_states_in_impl at ../src/backends/native/meta-kms.c:620
#6 meta_kms_run_impl_task_sync at ../src/backends/native/meta-kms.c:435
#7 meta_kms_update_states_sync at ../src/backends/native/meta-kms.c:641
#8 handle_hotplug_event at ../src/backends/native/meta-kms.c:651
#9 on_udev_hotplug at ../src/backends/native/meta-kms.c:668
Related: https://bugzilla.redhat.com/show_bug.cgi?id=2131269
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2709>
It is generally assumed here and there that the pointer at all point in
time is within some logical monitor, if there is any logical monitor to
be within.
With the input thread, this was for a short amount of time not reliable,
resulting in crashes in combination with hotplugging or suspend/resume,
where monitors come and go quickly.
What happens is that the pointer at first is within a logical monitor,
but when that logical monitor is removed, while the new monitor
viewports are handed to the input thread, the constraining happens
asynchronously, meaning there is a time between between the new
viewports are sent, and before clutter_seat_query_state() starts
reporting the constrained position.
If a new client mapped a maximized window during this short time frame,
we'd crash with
#0 meta_window_place at ../src/core/place.c:883
#1 place_window_if_needed at ../src/core/constraints.c:562
#2 meta_window_constrain at ../src/core/constraints.c:310
#3 meta_window_move_resize_internal at ../src/core/window.c:3869
#4 meta_window_force_placement at ../src/core/window.c:2120
#5 xdg_toplevel_set_maximized at ../src/wayland/meta-wayland-xdg-shell.c:429
#6 ffi_call_unix64 at ../src/x86/unix64.S:105
#7 ffi_call_int at ../src/x86/ffi64.c:672
#8 wl_closure_invoke at ../src/connection.c:1025
#9 wl_client_connection_data at ../src/wayland-server.c:437
The fix for this is to make sure that the viewports are updated and
pointers constrained synchronously, i.e. the main thread will wait until
after the input thread is done constraining before continuing.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=2147502
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2711>
The CRTC cursor sprite scale was incorrectly assumed to be always 1.0
when using the default not-scale-monitor-framebuffer mode. This is
harmless in most cases, as most clients provide HiDPI capable cursors,
but for the ones that didn't, we'd end up drawing their cursors
unscaled, when using the cursor planes.
Fix this by using the "texture scale" which is what is intended for
this.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2477
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2698>
Cursor planes tend to be ARGB8888 and support no other format (ideally
we should not hard code this, but un-hard-coding that is for another
day), and if we put e.g. a XRGB8888 buffer in there, it'll either result
in the gbm_bo allocation failing (it doesn't allow USE_CURSOR with any
other format) or mode setting failing if using dumb buffers directly.
In the former case, we'll fall back to OpenGL indefinitely, and in the
latter, we'll have failed mode sets as long as we try to set the invalid
cursor buffer as the cursor plane.
Change things to process all buffers that are not ARGB8888 using the
scale/rotate machinery we already have, turning XRGB8888 into ARGB8888.
Related: https://gitlab.gnome.org/GNOME/mutter/-/issues/2477
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2698>
Some mice send a value slightly lower than 120 for some detents. The
current approach waits until a value of 120 is reached before sending a
low-resolution scroll event.
For example, the MX Master 3 sends a value of 112 in some detents:
detent detent
| | |
^ ^ ^
112 REL_WHEEL 224
As illustrated, only one event was sent but two were expected. However,
sending the low-resolution scroll event in the middle plus the existing
heuristics to reset the accumulator solve this issue:
detent detent
| | |
^ ^ ^ ^
REL_WHEEL 112 REL_WHEEL 224
Send low-resolution scroll events in the middle of the detent to solve
this problem.
Fix https://gitlab.gnome.org/GNOME/mutter/-/issues/2469
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2668>
Previously, when scroll was received in a remote session, it was handled
as continuous scroll.
This generated issues with clients without high-resolution scroll
support as the code path in charge of accumulating scroll until 120 is
reached was not used and therefore discrete scroll events were not being
generated.
Handle scroll generated in a remote session as discrete scroll when the
source is CLUTTER_SCROLL_SOURCE_WHEEL to fix this issue.
Fix https://gitlab.gnome.org/GNOME/mutter/-/issues/2473
Fixes: 9dd6268d13 ("wayland/pointer: Send high-resolution scroll data")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2664>
We have no way to sanely add safe modes if there are no modes we can
compare with, thus don't try.
Fixes the following crash:
#0 are_all_modes_equally_sized at ../src/backends/native/meta-output-kms.c:284
#1 maybe_add_fallback_modes at ../src/backends/native/meta-output-kms.c:310
#2 init_output_modes at ../src/backends/native/meta-output-kms.c:347
#3 meta_output_kms_new at ../src/backends/native/meta-output-kms.c:414
#4 init_outputs at ../src/backends/native/meta-gpu-kms.c:332
#5 meta_gpu_kms_read_current at ../src/backends/native/meta-gpu-kms.c:368
#6 meta_gpu_kms_new at ../src/backends/native/meta-gpu-kms.c:403
#7 create_gpu_from_udev_device at ../src/backends/native/meta-backend-native.c:461
#8 init_gpus at ../src/backends/native/meta-backend-native.c:551
#9 meta_backend_native_initable_init at ../src/backends/native/meta-backend-native.c:632
Fixes: 877cc3eb7d44e2886395151f763ec09bea350444
Related: https://bugzilla.redhat.com/show_bug.cgi?id=2127801
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2646>
This is an old relic from when ClutterStageView was being added, and
tests were somewhat prepared to be able to test the "X11 style" of
things, with the nested backend some how managing to emulate that.
Lets drop that stuff, it isn't used by the test suite, and isn't useful
anyway; if we want to test X11 configurations, we should use the actual
X11 backend, which didn't make use of this anyway.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2619>
When creating a render device, we create a temporary EGLContext where we
then query the `GL_RENDERER` string to check whether the renderer is any
of the known software renderers. After we're done, we destroy the
context and move on.
This should be fine as according to specification eglDestroyContext(),
with the context being actually destroyed a bit later when it's no
longer current, but mesa, when running RK3399 (Pinebook Pro), this
results in a crash in a future eglMakeCurrent():
#0 in dri_unbind_context () at ../src/gallium/frontends/dri/dri_context.c:266
#1 in driUnbindContext () at ../src/gallium/frontends/dri/dri_util.c:763
#2 in dri2_make_current () at ../src/egl/drivers/dri2/egl_dri2.c:1814
#3 in eglMakeCurrent () at ../src/egl/main/eglapi.c:907
...
We can avoid this, however, by calling eglMakeCurrent() with
EGL_NO_CONTEXT on the EGLDisplay, prior to destroying, effectively
avoiding the crash, so lets do that.
Related: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7194
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2414
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2612>
EGLStream is incompatible with atomic mode setting, but nvidia-drm when
using libgbm is not, so lets only deny using atomic mode setting when
the render device is an EGLStream based one.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2578>
The type of render device used for a specific GPU affects the mode
setting backend that can be used, more specifically, when the render
device is an EGLStream based one, atomic mode setting isn't possible, as
page flipping is done via EGL, not via atomic mode setting commits.
Preparing the render devices before KMS devices means can make a more
informed decision whether to deny-list atomic mode setting for when
a certain GPU uses a EGLStream based render device instance.
This also means we need to translate mode setting devices to render node
devices when creating the render device itself, as doing it later when
creating the mode setting device is already too late.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2578>
Instead of passing 4 arguments (red, green and blue arrays as well as a
size), always pass them together in a new struct MetaGammaLut. Makes
things slightly less tedious.
The KMS layer still has its own variant, but lets leave it as that for
now, to keep the KMS layer "below" the cross backend CRTC layer.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
In practice, for KMS backend CRTC's, we cache the gamma in the monitor
manager instance, so that anyone asking gets the pending or up to date
value, instead of the potentially not up to date value if one queries
after gamma was scheduled to be updated, and before it was actually
updated.
While this is true, lets still move the API to the MetaCrtc type; the
backend specific implementation can still look up cached values from the
MetaMonitorManager, but for users, it becomes less cumbersome to not
have to go via the monitor manager.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
Same applies to MetaOutput. The reason for this is to make it possible
to more reliably know when there was EDID telling us about these
details. This will be used for colord integration.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2141>
As for the types of monitor, X11 and KMS are currently assumed to always be
physical, while the virtual ones are assumed to be virtual. In theory
X11 ones could be virtual, but lets not bother. KMS ones can be virtual
in the case of virtual KMS, but we typically use that for testing as if
it was physical, so lets leave it as such.
Will later be used to feed correct information to colord.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2141>
Create a color manager type that eventually will be the high level
manager of color related behavior, such as ICC profiles and
color "temperature" a.k.a. night light.
For now, it's only an empty shell. It's also constructed by the actual
backend, as at a later point, the X11 and native color management
implementations will differ.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2141>
Although its atomic KMS support seems to work at first, mode sets to
anything other than the Xilinx preferred max resolution of 2048x1280
would result in a hang. The xlnx kernel driver is given:
`DRM_MODE_ATOMIC_ALLOW_MODESET | DRM_MODE_PAGE_FLIP_EVENT`
and it does complete the mode set without error, but page flip events
never arrive and so you're frozen on the first frame.
Revert to legacy KMS which has no such problem with non-default modes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2596>
