If the cursor is already at the end of the Text contents then we
need to maintain its position when deleting the previous character
using the relative key binding.
The required "fake" libclutter-cogl.la upon with the main clutter
shared object depends is only built with introspection enabled
instead of being built unconditionally.
Passing:
--library=clutter-@CLUTTER_FLAVOUR@-@CLUTTER_API_VERSION@
to g-ir-scanner, when building Cogl was causing g-ir-scanner to
link the introspection program against the installed clutter library,
if it existed or fail otherwise. Instead copy the handling from
the json/ directory where we link against the convenience library
to scan, and do the generation of the typelib later in the
main clutter/directory.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1594
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If text is set, ClutterText should never return less than the layout
height for minimum and preferred heights.
This holds unless ellipsize and wrap are enabled, in which case the
minimum height should be the height of the first line -- which is
the height needed to at the very least show the ellipsization.
Based on a patch by: Thomas Wood <thomas@openedhand.com>
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1598
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
I was seeing clutter_text_get_selection trying to malloc up to 4Gb due to
unexpected negative arithmetic for the start/end offsets which resulted
in a crash.
This just tests for positions of -1 before deciding if the start/end
positions need to be swapped. The conversion from position to byte offset
already works with -1.
cogl_clip_push_window_rect is implemented using GPU scissoring which allows
the GPU to cull anything that falls outside a given rectangle. Since in the
case of picking we only ever care about a single pixel we can get the GPU to
ignore all geometry that doesn't intersect that pixel and only rasterize for
one pixel.
Previously clipping could only be specified in object coordinates, now
rectangles can also be pushed in window coordinates.
Internally rectangles pushed this way are intersected and then clipped using
scissoring. We also transparently try to convert rectangles pushed in
object coordinates into window coordinates as we anticipate the scissoring
path will be faster then the clip planes and undoubtably it will be faster
than using the stencil buffer.
The stencil buffer is always cleared the first time a clip is used
that needs it and the stencil test is disabled otherwise so there is
no need to clear before a paint.
COGLenum, COGLint and COGLuint which were simply typedefs for GL{enum,int,uint}
have been removed from the API and replaced with specialised enum typedefs, int
and unsigned int. These were causing problems for generating bindings and also
considered poor style.
The cogl texture filter defines CGL_NEAREST and CGL_LINEAR etc are now replaced
by a namespaced typedef 'CoglTextureFilter' so they should be replaced with
COGL_TEXTURE_FILTER_NEAREST and COGL_TEXTURE_FILTER_LINEAR etc.
The shader type defines CGL_VERTEX_SHADER and CGL_FRAGMENT_SHADER are handled by
a CoglShaderType typedef and should be replaced with COGL_SHADER_TYPE_VERTEX and
COGL_SHADER_TYPE_FRAGMENT.
cogl_shader_get_parameteriv has been replaced by cogl_shader_get_type and
cogl_shader_is_compiled. More getters can be added later if desired.
Calling glReadPixels is bad enough in forcing us to synchronize the CPU with
the GPU, but glFinish has even stronger synchonization semantics than
glReadPixels which may negate some driver optimizations possible in
glReadPixels.
Commit 43fa38fcf5 broke out-of-tree builds by removing some of the
builddir directories from the include path. builddir/clutter/cogl and
builddir/clutter are needed because cogl.h and cogl-defines-gl.h are
automatically generated by the configure script. The main clutter
headers are in the srcdir so this needs to be in the path too.
When building Clutter with introspection enabled everything stops
at Cogl GIR generation because it depends on the installed library
to work. Since we still require some changes in the API to be able
to build the GIR and the typelib for Cogl we should disable the
generation of the GIR as well.
If the filter means that the there should be no rows left in the model,
clutter_model_get_iter_at_row (model, 0) should return NULL.
Howevever the currene implementation misbehaves and returns a bad iterator.
This change resolves the issue by tracking if we actually found any
non-filtered rows in our pass through the sequence.
OH Bugzilla: 1591
Currently, the default screen guard value is 0, which is a valid
screen number on X11, and it might not be the default.
Patch suggested by: Owen W. Taylor <otaylor@redhat.com>
Currently, the introspection data for Cogl is built right into
Clutter's own typelib. This makes functions like:
cogl_path_round_rectangle()
Appear as:
Clutter.cogl_path_round_rectangle()
It should be possible, instead, to have a Cogl namespace and:
Cogl.path_round_rectangle()
This means building introspection data for Cogl alone. Unfortunately,
there are three types defined in Cogl that confuse the introspection
scanner, and make it impossible to build a typelib:
COGLint
COGLuint
COGLenum
These three types should go away before 1.0, substituted by int,
unsigned int and proper enumeration types. For this reason, we can
just set up the GIR build and wait until the last moment to create
the typelib. Once that has been done, we will be able to safely
remove the Cogl API from the Clutter GIR and typelib and let
people import Cogl if they want to use the Cogl API via introspection.
When calling clutter_model_iter_next () / clutter_model_iter_prev () we need
to update the row for the iterator. In order to improve the peformance of
iterating this change adds a private row mutator and switches ClutterListModel
to use it.
In order to carry out various comparisons for e.g. identifying the first
iterator in the model we need a ClutterModelIter. This change switches from
creating a new iterator each time to reusing an existing iterator.
This is simply a wrapper around cogl_color_set_from_4f and
cogl_material_set_color. We already had a prototype for this, it was
an oversight that it wasn't already implemented.
There were several functions I believe no one is currently using that were
only implemented in the GL backend (cogl_offscreen_blit_region and
cogl_offscreen_blit) that have simply been removed so we have a chance to
think about design later with a real use case.
There was one nonsense function (cogl_offscreen_new_multisample) that
sounded exciting but in all cases it just returned COGL_INVALID_HANDLE
(though at least for GL it checked for multisampling support first!?)
it has also been removed.
The MASK draw buffer type has been removed. If we want to expose color
masking later then I think it at least would be nicer to have the mask be a
property that can be set on any draw buffer.
The cogl_draw_buffer and cogl_{push,pop}_draw_buffer function prototypes
have been moved up into cogl.h since they are for managing global Cogl state
and not for modifying or creating the actual offscreen buffers.
This also documents the API so for example desiphering the semantics of
cogl_offscreen_new_to_texture() should be a bit easier now.
These are necessary if nesting redirections to an fbo,
otherwise there's no way to know how to restore
previous state.
glPushAttrib(GL_COLOR_BUFFER_BIT) would save draw buffer
state, but also saves a lot of other stuff, and
cogl_draw_buffer() relies on knowing about all draw
buffer state changes. So we have to implement a
draw buffer stack ourselves.
Signed-off-by: Robert Bragg <robert@linux.intel.com>
It is valid in some situations to have a material layer with an invalid texture
handle (e.g. if you setup a texture combine mode before setting the texture)
and so _cogl_material_layer_free needs to check for a valid handle before
attempting to unref it.
Adds missing notices, and ensures all the notices are consistent. The Cogl
blurb also now reads:
* Cogl
*
* An object oriented GL/GLES Abstraction/Utility Layer
Redundant clearing of depth and stencil buffers every render can be very
expensive, so cogl now gives control over which auxiliary buffers are
cleared.
Note: For now clutter continues to clear the color, depth and stencil buffer
each paint.
When replacing the fbo_handle with a new handle it first unrefs the
old handle. This was previously a call to cogl_offscreen_unref which
silently ignored attempts to unref COGL_INVALID_HANDLE. However the
new cogl_handle_unref does check for this so we should make sure the
handle is valid to avoid the warning.
Bug 1565 - test-fbo case failed in many platform
clutter_texture_new_from_actor was broken because it created the FBO
texture but then never attached it to the material so it was never
used for rendering. The old behaviour in Clutter 0.8 was to assign the
texture directly to priv->tex. In 0.9 priv->tex is replaced with
priv->material which has a reference to the tex in layer 0. So putting
the FBO texture directly in layer 0 more closely matches the original
behaviour.
Currently ClutterModel::get_iter_at_row() ignores whether we have
a filter in place. This also extends to the get_n_rows() method.
The more consistent, more intuitive and surely more correct way to
handle a Model with a filter in place is to take into account the
presence of the filter itself -- that is:
- get_n_rows() should take into account the filter and return the
number of *filtered* rows
- get_iter_at_row() should also take the filter into account and
get the first non-filtered row
These two changes make the ClutterModel with a filter function
behave like a subset of the original Model without a filter in
place.
For instance, given a model with three rows:
- [row 0] <does not match filter>
- [row 1] <matches filter>
- [row 2] <matches filter>
- [row 3] <does not match filter>
The get_n_rows() method will return "2", since only two rows will
match the filter; the get_first_iter() method will ask for the
zero-eth row, which will return an iterator pointing to the contents
of row 1 (but the :row property of the iterator will be set to 0);
the get_last_iter() method will ask for the last row, which will
return an iterator pointing to the contents of row 2 (but the :row
property of the iterator will be set to 1).
This changes will hopefully make the Model API more consistent
in its usage whether there is a filter in place or not.
Currently, there is no way for implementations of the ClutterModel
abstract class to know whether there is a filter in place. Since
subclasses might implement some optimization in case there is no
filter present, we need a simple (and public) API to ask the model
itself.
Setting the wrap mode on the PangoLayout seems to have disappeared
during the text-actor-layout-height branch merge so this brings it
back. The test for this in test-text-cache no longer needs to be
disabled.
We also shouldn't set the width on the layout if there is no wrapping
or ellipsizing because otherwise it implicitly enables wrapping. This
only matters if the actor gets allocated smaller than its natural
size.
Bug 1561 - Bad code in clutter-alpha.c
The implementation of the easing modes equations followed closely
the JavaScript and ActionScript counterparts. Obviously, JS and AS
are not C-compatible, so later versions of gcc (4.4.0 for instance)
would complain about uninitialized variables and such. The code is
also obfuscated and hard to debug/understand.
For these reasons, the implementation should be unobfuscated and
sanitized.
A lockup was reported by fargoilas on #clutter and removing the server grab in
clutter_x11_texture_pixmap_sync_window fixed the problem.
We were doing an x server grab to guarantee that if the XGetWindowAttributes
request reported that our redirected window was viewable then we would also
be able to get a valid pixmap name. (the composite protocol says it's an
error to request a name for a window if it's not viewable) Without the grab
there would be a race condition.
Instead we now handle error conditions gracefully.
The documentation for the ::cursor-event says that the signal
is emitted only when the cursor position changes. Right now it
is being emitted every time we ensure the cursor position during
the Text paint sequence.
The clutter_text_ensure_cursor_position() function should check
whether the stored cursor position has changed since the last
paint, and emit the ::cursor-event signal only when there has
been a change.
We only want to eschew the pango_layout_set_width() on editable,
single-line Text actors because they can "scroll" the PangoLayout.
This fixes the ellipsization on entries.
In unifying the {gl,gles}/cogl.c code recently, moving most of the code into
common/cogl.c the gmodule.h include was also mistakenly moved.
Thanks to Felix Rabe for reporting this issue.
Note: I haven't tested this fix myself, as I'm not set up to be able to
build for OS X
Buffer objects aren't currently available for glx indirect contexts, so we
now have a fallback that simply allocates fake client side vbos to store the
attributes.
This makes the #if 0'd debug code that was in _cogl_journal_flush_quad_batch
- which we have repeatedly found usefull for debugging various geometry
issues in Clutter apps - a runtime debug option.
The outline colors rotate in order from red to green to blue which can also
help confirm the order that your geometry really drawn.
The outlines are not affected by the current material state, so if you e.g.
have a blending bug where geometry mysteriously disappears this can confirm
if the underlying rectangles are actually being emitted but blending is
causing them to be invisible.
Editable ClutterText will scroll when allocated less width than is
necessary to lay out the entire layout on a single line, so return 1 for
the minimum width in this case.
Approved by Emmanuele Bassi, fixes bug #1555.
