A long press is a special form of click action; the default
implementation uses a single signal with multiple states: query, action
and cancel. On click we use the "query" state to check whether the
ClutterClickAction supports long presses; if the callback returns TRUE
then we install a timeout and we either emit the "activate" state when
the timeout expires or we emit the "cancel" state if the pointer leaves
the actor, or if the pointer moves outside a certain threshold. If the
long press reached the "activate" state then we skip the clicked signal
emission.
A property to control the minimum time that has to elapse before a press
is recognized as a long press. This will be used by ClutterClickAction,
but it can be shared across touch-based gestures.
The G_CONST_RETURN define in GLib is, and has always been, a bit fuzzy.
We always used it to conform to the platform, at least for public-facing
API.
At first I assumed it has something to do with brain-damaged compilers
or with weird platforms where const was not really supported; sadly,
it's something much, much worse: it's a define that can be toggled at
compile-time to remove const from the signature of public API. This is a
truly terrifying feature that I assume was added in the past century,
and whose inception clearly had something to do with massive doses of
absynthe and opium — because any other explanation would make the
existence of such a feature even worse than assuming drugs had anything
to do with it.
Anyway, and pleasing the gods, this dubious feature is being
removed/deprecated in GLib; see bug:
https://bugzilla.gnome.org/show_bug.cgi?id=644611
Before deprecation, though, we should just remove its usage from the
whole API. We should especially remove its usage from Cally's internals,
since there it never made sense in the first place.
If an actor or the stage to which it belongs are being destroyed then
there is no point in queueing a redraw that will not be seen anyway.
Bailing out early also avoids the case in which a redraw is queued
during destruction wil cause redraw entries will be added to the Stage,
which will take references on it and cause the Stage never to be
finalized.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2652
With the instantiatable ClutterShaderEffect, the only reason for
ClutterShader to exist is to make the ClutterActor::paint implementation
miserable.
Yes, ClutterShader doesn't use a FBO, so it's "more efficient" on
ClutterTextures. It's also generally wrong unless you know *exactly* how
the actor's pipeline is set up — something we cannot even guarantee
internally unless we start doing lame type checks.
ClutterShaderEffect doesn't require to be sub-classed in order to be
useful. It is possible to just create an instance, set the source and
the uniforms, and attach it to an actor. This should effectively replace
ClutterShader for good.
We were mistakenly using the constant 4 to determine the number of
vertices that need to be culled for a paint-volume to be considered
fully culled too. This is only ok for 2d volumes and was resulting in
some 3d volumes being considered culled whenever 4 out of 8 vertices
were culled. This fix is simply to reference the vertex_count variable
instead of assuming 4.
_clutter_stage_do_pick called by interactive picking and
clutter_stage_get_actor_at_pos could be accidentally reading back the wrong
actor id's if an other stage has had a more recent render due to animation.
This should resolve some multi stage / ClutterGtk related pick id warnings.
Commit 13ac1fe7 purported to extend the _clutter_id_pool_lookup()
warning to the case where the id referred to a deleted actor, but did
not actually do so, because _clutter_id_pool_remove() set deleted IDs
to 0xdecafbad, not NULL. Fix this.
https://bugzilla.gnome.org/show_bug.cgi?id=650597
Those were added on the old "just for automatic testing" times. That was
somewhat silly on that moment. Now is just silly (ie: having the stage
returning as default name "Stage").
The real description should be set by the app, or provided by the
context of a specific actor feature (like the tooltip on StWidget).
The current information provided by the default description can be
mostly obtained from the ATK_ROLE, and the indirect debugging
advantage of having always a meaningful description is just not enough
to justify them, and you can solve that by proper debug logging.
Fixes: http://bugzilla.clutter-project.org/show_bug.cgi?id=2482
Most of the accessibility tests can be executed without the
accessibility support, although it is clear that they will
not work properly (ie using accerciser).
But in some specific cases (right now just the atk event test),
the test will crash if no accessibility support is enabled
Fixes http://bugzilla.clutter-project.org/show_bug.cgi?id=2447
The Cogl depth state API has changed to have a separate CoglDepthState
struct so this test was no longer building. This patch updates it to
use CoglPipeline and the new depth state API.
Cogl has changed the name of the experimental CoglPixelArray API to
CoglPixelBuffer. This updates the test to reflect that so it will
continue to build.
In Cogl, cogl-pango.h has moved to <cogl-pango/cogl-pango.h>. When
using the experimental 2.0 API (which Clutter does) it is no longer
possible to include it under the old name of <cogl/cogl-pango.h> so we
need to update the include location.
In _clutter_actor_queue_redraw_with_clip, there was the possibility that
the actor will add itself to the stage's redraw queue without keeping track
of the allocated list member.
In clutter_actor_unparent, the redraw queue entry was being invalidated
before the mapped notify signal was being fired, meaning that queueing a
redraw of an unmapped actor in the mapped notification callback could
cause a crash.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2621
Since ClutterText has overlapping primitives when selecting, or a
visible cursor, then we need to report that to Clutter, to avoid
bleeding colors through when a Text actor is non-fully opaque.
_clutter_stage_queue_actor_redraw returns a pointer to the
ClutterStageQueueRedrawEntry struct which it allocates. The actor is
expected to store a pointer to this so that it doesn't need to search
the list of queued redraws next time a queue redraw is called. However
_clutter_actor_queue_redraw_full wasn't storing this pointer which
meant that it thought every queue redraw was the first queue
redraw. That meant that queueing a redraw with a clip or an effect
would override any previous attempts to queue a redraw instead of
trying to combine them.
I think this happened because the old queue_redraw_with_clip also
didn't store the pointer and queue_redraw_full was based on that.
This adds a virtual to ClutterActor so that an actor subclass can
report whether it has overlapping primitives. ClutterActor uses this
to determine whether it needs to use ClutterFlattenEffect to implement
the opacity property. The default implementation of the virtual
returns TRUE which means that most actors will end up being redirected
offscreen when the opacity != 255. ClutterTexture and ClutterRectangle
override this to return FALSE because they should never need to be
redirected. ClutterClone overrides it to divert to the source.
The values for the ClutterOffscreenRedirect enum have changed to:
AUTOMATIC_FOR_OPACITY
The actor will only be redirected if has_overlaps returns TRUE and
the opacity is < 255
ALWAYS_FOR_OPACITY
The actor will always be redirected if the opacity < 255 regardless
of the return value of has_overlaps
ALWAYS
The actor will always be redirected offscreen.
This means that the property can't be used to prevent the actor from
being redirected but only to increase the likelihood that it will be
redirected.
ClutterActor now adds and removes the flatten effect depending on
whether flattening is needed directly in clutter_actor_paint(). There
are new internal versions of add/remove_effect that don't queue a
redraw. This means that ClutterFlattenEffect is now just a no-op
subclass of ClutterOffscreen. It is only needed because
ClutterOffscreen is abstract. Removing the effect also makes it so
that the cached image will be freed as soon as an actor is repainted
without being flattened.
This adds a conformance test for redirecting offscreen. It verifies
that the redirected actor has the right paint opacity, that it gets
redrawn only when the image cache needs to be invalidated and that it
ends up with the right appearance.
This adds a property which can be used to redirect the actor through
an FBO before painting so that it becomes flattened in an image. The
image can be used as a cache to avoid having to repaint the actor if
something unrelated in the scene changes. It can also be used to
implement correct opacity even if the actor has overlapping
primitives. The property is an enum that takes three values:
CLUTTER_OFFSCREEN_REDIRECT_NEVER: The default behaviour which is to
never flatten the actor.
CLUTTER_OFFSCREEN_REDIRECT_ALWAYS: The actor is always redirected
through an FBO.
CLUTTER_OFFSCREEN_REDIRECT_ONLY_FOR_OPACITY: The actor is only
redirected through an FBO if the paint opacity is not 255. This
value would be used if the actor wants correct opacity. It will
avoid the overhead of using an FBO whenever the actor is fully
opaque.
The property is implemented by installing a ClutterFlattenEffect.
ClutterFlattenEffect is a new internal class which subclasses
ClutterOffscreen to redirect the painting to an FBO. When
ClutterOffscreen paints, the effect sets an opacity override on the
actor so that the image will always contain the actor at full
opacity. The opacity is then applied to the resulting image before
painting it to the stage. This means the actor does not need to be
redrawn while the opacity is being animated.
The effect has a high internal priority so that it will always occur
before any other effects and it gets hidden from the application.
When calling clutter_actor_clear_constraints the layout of the actor
may change so we need to queue a relayout. Similarly when the effects
are cleared we need to queue a redraw.
