And take it into account in meta_kms_crtc_get_deadline_evasion.
This uses the same fundamental approach as clutter frame clock scheduling:
Measure the deadline timer dispatch duration, keep track of the longest
duration, and set the timer to fire such that the longest measured
dispatch duration would result in it completing shortly before start of
vblank.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3612
v2:
* Move DEADLINE_EVASION_CONSTANT_US addition from
meta_kms_crtc_determine_deadline to meta_kms_crtc_get_deadline_evasion.
* Calculate how long before start of vblank dispatch completed for
debug output in crtc_frame_deadline_dispatch.
* Shorten over-long lines in crtc_frame_deadline_dispatch.
v3:
* Take VRR into account in crtc_frame_deadline_dispatch &
meta_kms_crtc_update_shortterm_max_dispatch_duration. (Robert Mader)
v4:
* Check if deadline has already passed in meta_kms_crtc_determine_deadline,
set the deadline for one refresh interval later if so.
* Fix indentation in crtc_frame_deadline_dispatch.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3934>
The manager keeps track of which connectors are leasable in general,
which connectors and resources are already part of a lease, and keeps
track of when leases get revoked.
When leasing out connectors, the required drm resources to drive the
connectors are included in the lease as well.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
With leasing, we will give another client control over connectors but
they also need a CRTC to drive them. Those CRTCs won't be available to
the desktop/monitor-manager.
Co-authored-by: Sebastian Wick <sebastian.wick@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3746>
Use a sufficiently low refresh rate to calculate the CRTC deadline
when variable refresh rate is enabled. This is done to avoid cursor
updates from driving the monitor refresh rate.
It's not great solution and is sometimes not enough, but it avoids
stutter in the main content as a result of cursor movement in most
cases.
The unfortunate downside of this approach is that cursor movement
would usually only update with the main content and would not be
smooth when the main content updates are not frequent enough.
A better solution may use an approach similar to LFC (Low Framerate
Compensation) to insert cursor-only updates between updates of the
main content, but achieving adequate results with an approach of this
nature requires more research and experimentation.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1154>
Add functions to update and monitor the value of the "VRR_ENABLED"
KMS property.
This requires the addition of functions to process CRTC property
updates in both the atomic and the simple KMS backends. The
implementation is similar to the implemention of processing
connector updates.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1154>
The kernel doesn't let us set gamma to passthrough with the legacy API
so we have to trick a bit and create an identity LUT, and also when we
read the KMS state, detect when an identity LUT is active.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3552>
Dropped obsolete Free Software Foundation address pointing
to the FSF website instead as suggested by
https://www.gnu.org/licenses/gpl-howto.html
keeping intact the important part of the historical notice
as requested by the license.
Resolving rpmlint reported issue E: incorrect-fsf-address.
Signed-off-by: Sandro Bonazzola <sbonazzo@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3155>
This makes it possible to post KMS updates that will always defer until
just before the scanout deadline. This is useful to allow queuing cursor
updates where we don't want to post them to KMS immediately, but rather
wait until as late as possible to get lower latency.
We cannot delay primary plane compositions however, and this is due to
how the kernel may prioritize GPU work - not until a pipeline gets
attached to a atomic commit will it in some drivers get bumped to high
priority. This means we still need to post any update that depends on
OpenGL pipelines as soon as possible.
To avoid working on compositing, then getting stomped on the feet by the
deadline scheduler, the deadline timer is disarmed whenever there is a
frame currently being painted. This will still allow new cursor updates
to arrive during composition, but will delay the actual KMS commit until
the primary plane update has been posted.
Still, even for cursor-only we still need higher than default timing
capabilities, thus the deadline scheduler depends on the KMS thread
getting real-time scheduling priority. When the thread isn't realtime
scheduled, the KMS thread instead asks the main thread to "flush" the
commit as part of the regular frame update. A flushing update means one
that isn't set to always defer and has a latching CRTC.
The verbose KMS debug logging makes the processing take too long, making
us more likely to miss the deadline. Avoid this by increasing the
evasion length when debug logging is enabled. Not the best, but better
than changing the behavior completely.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2777>
If the device supports the atomic API the property based API is used to
write gamma updates and the legacy API is used in the non-atomic case.
The current state is read from the legacy API always though which can be
different from the property API. This commit always uses the correct API
to update the state.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2861>
We started to report resource changes using prediction when an update
had been successfully committed. While at it, gamma changes were
reported too, but this was problematic, as gsd-color will listen for the
MonitorsChanged D-Bus signal and naively set the gamma again, even if it
didn't change. There aren't currently any actual use cases for being
told when gamma changes from a prediction, so just ignore it and just
report privacy screen changes.
This avoids a feedback loop between mutter and gsd-color.
Fixes: 81b28a1d975f2511d8800faa2c187703eb66ce63
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2531>
When we change the privacy screen, we added a result listener to the KMS
update object to notify the upper layer about the privacy screen state
change. This was slightly awkward as one might have changed the state
multiple times for a single update, thus it was necessary to remove any
old result listeners to an update before adding a new one.
Doing this will not be possible when updates are fully async and managed
by the KMS impl device.
To handle this, instead make the post-commit prediction notify about
changes that happens in response to a successfully committed update. We
already predicted the new privacy screen state, so the necessary change
was to plumb the actual change into a callback which emits the signal if
there actually was a privacy screen change.
This will then be communicated via the same signal listener that already
listens to the 'resources-changed' signal.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2340>
The name had a bit conceptual conflicts with MetaKmsUpdate, as it shared
its namespace but had no relation to it. Fix this by renaming it
MetaKmsResourceChanges (and the corresponding META_KMS_UPDATE_CHANGE_*
to META_KMS_RESOURCE_CHANGE_*). The term "resource" is used since that's
already used in the signal, and the fact that the changes partly comes
from changes in the DRM resource as retrieved by drmModeGetResources.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2340>
The ImplDeviceAtomic converts the MetaKmsPlaneRotation back to the
concrete KMS value. The MetaMonitorTransform is always directly
converted to a MetaKmsPlaneRotation.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2379>
Updating the PropTable has the side effect that the parse callback now
also gets called on hotplug but it is used to initialize data. The parse
callbacks are moved to the read_state functions which are aware if this
is an initializing call or just an update.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2379>
The property doesn't necessarily exist when using drivers that doesn't
support atomic mode setting, and the way it worked will break night
light and other gamma related features. This makes things use the gamma
length; if it is higher than 0, it definitely supports it one way or the
other, i.e. GAMMA_LUT with the atomic backend, and drmModeCrtcSetGamma()
with the legacy/simple backend.
Fixes: 364572b95c8354ac66674064a8058aa98bc0bbef
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2287
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2435>
It doesn't depend on whether the CRTC is active or not, so always read
it. This is also useful to know whether a CRTC supports gamma, before it
is being turned on, without relying on the existance of properties.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2435>
The way device backends implement power saving differ, and power saving
needs to contain nothing incompatible in the same update. Make it
impossible to e.g. mode set, page flip, etc while entering power save by
not using MetaKmsUpdate's at all for this.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2159>
Since we cache already all the KMS parameters we care about let's check at
each device update if anything has really changed and only in such case
emit a resources-changed signal.
In this way we can also filter out the DRM parameters that when changed
don't require a full monitors rebuild.
Examples are the gamma settings or the privacy screen parameters, that
emits an udev "hotplug" event when changed, but we want to register those
only when we handle the changed property.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1964>
Values may need to be processed and parsed in custom ways; make this
possible via the property table infrastructure using a callback.
Will be used for e.g. parsing rotation and formats.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
