When the actor gets a new "main" surface assigned, it adds the
new surface to the stack of surface actors, but forgets to remove
the old one.
This stale pointer in the array may cause invalid reads and crashes
after the assigned surface is disposed, e.g. when destroying the
MetaWindowActor tries to disconnect signals from all accounted
surface actors.
Fixes: 9a2c8b2592 ("window: Add suspend state")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3252>
Commit 3bfcb6d1 fixed the check for tiling via keybindings, but
ignored a subtle edge case when tiling with the pointer: The
monitor used for tiling is the monitor with the pointer, which
is not necessarily the one that contains the largest part of the
window.
That is, the correct monitor to check against depends on the
context where the function is called. We can either figure
it out automatically via the current window drag, or make it
a parameter.
The latter is clearer, because the callers already decide which
monitor to use for tiling anyway.
Fixes: 3bfcb6d1b9 ("window: Fix portrait orientation check for tiling")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3248>
These snippets are retrieved anew every time a window is resized. But
callers never modify them, they're effectively read-only so cache them
at the place of creation.
This is required to convince the pipeline hash that each reuse of the
same snippet really is the same snippet and so the pipeline is unchanged.
`CoglPipelineSnippetList` only does shallow comparisons and there's no
need right now to reimplement it as a deep comparison.
This eliminates the log message:
> Over 50 separate %s have been generated which is very unusual,
> so something is probably wrong!
which isn't actually a leak but more a warning about wasting time.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6958
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3224>
GInitable initialization is failable, currently, it may fail before error
traps are initialized, but error traps would be invariably deinitialized on
finalize() of the failed object. This results in an assert hit, on top of the
original failure to initialize the backend.
The libX11 error handlers are a pure client-side construct, and not a server
request, they just need XInitThreads() called to set up the library-side locks
protecting access to the global variable. This is done beforehand already at
meta_backend_x11_init(), so initialize the error traps around that time too.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3242>
Commit 9c3b130f67 changed slightly destruction order to handle use-after-free
situations, but missed a small new one introduced by the order change: The
MetaX11Display may schedule callbacks through MetaLaters, which depend on the
MetaCompositor, which is now freed before the MetaX11Display.
Since there is no winning move here, make the MetaX11Display aware of this
by avoiding to remove the callback if the MetaCompositor is already gone.
The MetaLaters infrastructure is already fully freed at this point (incl. the
data it contained), so this shouldn't be a leak.
Fixes: 9c3b130f67 ("display: Fix destruction order")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3247>
Use work area from the monitor that the window is currently on to
determine if tiling should be allowed.
Window tiling is disabled for monitors with portrait orientation, but
the work area we use to detect portrait orientation is taken from the
monitor that currently has the mouse pointer.
This works fine for edge tiling using the mouse, but this is broken when
using keybindings for window tiling because your mouse pointer could be
on a different monitor that has horizontal orientation.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3199>
While adjusting the monitor layout of my docked laptop, mutter got a
segfault while attempting to dereference the frame_info struct. This
happened on gnome-shell 44.4-1.fc38.
cogl_onscreen_peek_head_frame_info() just forwards the call to
g_queue_peek_head() which returns NULL in the event that the queue is
empty. If finish_frame_result_feedback() is expected to always be called
with a non-empty queue there's still a bug somewhere, but regardless
this API can legitimately return NULL so it should be checked for prior
to dereferencing.
Fixes: 61801a713a ("onscreen/native: Avoid freezing the frame clock on failed cursor commits")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3229>
If we are making an update that only disables CRTCs, we would not
actually post it, but just drop it then post nothing, as it wasn't ever
added to the mode set update hash table. This resulted in hotplugs where
we loose the all the connectors we had, where we want to disable all
CRTCs and enable nothing, to fail to disable said CRTCs.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3073>
This removes the implicit dependency on `display->stack_tracker`
existing and being valid in `on_stack_changed()` because
now it is the stack-tracker's responsibility to subscribe
to the "changed" signal of the stack and handle the changes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3202>
The _NET_WM protocol, written before the birth of XInput 2.x, does have
no notion of different input devices whatsoever. Anyways, in a X11 session
it is safe to assume this refers about the Virtual Core Pointer since
every input device by default drives it (incl. touchscreens through the
"pointer emulating sequence", and styli).
This assumption falls apart in a Wayland session with non-pointer input,
since we do actually distinguish between all the distinct pointer devices
and touchpoints, and do not let them emulate mouse input.
We do need to specify a device/sequence there to drive the window
move/resize operation. The _NET_WM_MOVERESIZE message just gives us the
x/y root coordinates the resize was started from, so work from there
into guessing what is the most likely device/sequence that did trigger
the request on the client side.
Conversely, on Wayland we do not need to check for possible race
conditions in the pressed button states since we have larger guarantees
about not missing these events if we checked for the button modifier
mask beforehand, so make that race condition check specific to the
X11 sessions.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2836
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3059>
There can be events which don't not have source devices set on them, because
they are not backed by real hardware and rather generated by us, for example
IM events coming from the shell's OSK.
So don't assume all events have a source device in
update_pointer_visibility_from_event() and rather ignore those without one,
as we are only interested in events coming from "real hardware" here.
This fixes an issue where the mouse pointer would appear on devices without
any input from actual mice/touchpads on OSK key presses.
Fixes: 6aa42d6dad
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3236>
When we call get_grab_info() to get the sequence, device and coordinates for
a touch window drag, as the device we use the device from the
MetaWaylandPointer, assuming that it's set to the core pointer.
In the case where there is no pointer device present on the seat (so no
mouse nor touchpad), the wayland pointer remains disabled though, and
pointer->device is NULL.
This means touch window dragging on hardware without pointer devices
present is broken (because MetaWindowDrag assumes that there's a valid
device passed in meta_window_drag_begin()). Fix it by taking the core
pointer directly from ClutterSeat instead of going the extra detour through
MetaWaylandPointer.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3238>
If meta_eis_viewport_get_position() returned FALSE, the variable
'has_position' would be initialized. This variable represents
exactly the return value of meta_eis_viewport_get_position(),
so just assign it to the variable directly.
Spotted by Coverity.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3237>
CLUTTER_SCROLL_SOURCE_UNKNOWN only generates continuous scroll events
and no discrete scroll events.
As a result, scrolling only works in applications, that support high
resolution scroll wheels, like GTK4 applications.
GTK3 applications, on the other hand, don't support high resolution
scroll wheel events, and such scrolling does not work in these
applications.
Fix this issue by using the scroll source CLUTTER_SCROLL_SOURCE_WHEEL.
Since commit 92a90774a4 ([0]),
CLUTTER_SCROLL_SOURCE_WHEEL generates discrete events to ensure that
scrolling in legacy applications still works.
[0]: https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2664
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3235>
We need to trigger a mode set when power-save changes to 'on' if it's
purely about power saving, but when they arrive as part of a hotplug
event, we'll handle all that later, in the monitors-changed handling,
that contains the new configuration.
This avoids a crash that happens due to the mode set being queued on now
disabled connectors.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2985
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3233>
We can change power save mode for two reasons: gsd-power told us to, or
we saw a hotplug event. Sometimes it's useful to be able to make the
distinction to why a power save mode changed, so add a reason to the
signal.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3233>
If the deadline timer is disabled (like on nvidia-drm or when
`MUTTER_DEBUG_KMS_THREAD_TYPE=user`), then we need to call
`meta_kms_device_set_needs_flush` on every cursor movement. But some were
getting skipped if they coincided with page flips, which resulted in some
cursor movements failing to schedule the frame clock. This resulted in
unnecessary levels of frame skips when using lower frequency input devices
which are less likely to provide another event within the same frame period.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3002
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3210>
Add a pair of calls to ensure the error trap infrastructure
survives for the MetaBackend. This will help on later commits that
largely operate on the MetaBackendX11 Display.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3230>
Keep a per-display list of error traps, so we don't mix them
together, and possibly deem unintended error traps outdated.
This means init/deinit calls are now stackable, and need to
happen evenly. In order to honor this, move the MetaX11Display
error trap destrution to finalize.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3230>
This forces not using the seat_proxy. But still allows the use of
session_proxy.
On tests, headless mode is explicitly set and it might not be available a
systemd session. To avoid test failing on this situation skip using
meta_launcher wich uses session_proxy and seat_proxy.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3093>
If we're a input-only remote desktop session, create libei regions on an
absolute pointer device corresponding to all logical monitors. This
allows absolute pointer motions without screen casting.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3228>
Sometimes it makes no sense to have a shared pointer device, for example
when they have no set region occupying the global stage coordinate
space. This applies to for example window screen cast based pointer
device regions - they are always local to the window, and have no
position.
We do need shared absolute devices in some cases though, primarily
multi-head remote desktop, where it must be possible to keep a button
reliably pressed when crossing monitors that have their own
corresponding regions.
To handle this, outsource all this policy to the one who drives the
emulated input devices. Remote desktop sessions where the screen casts
correspond to specific monitors (physical or virtual), we need to make
sure they map to the stage coordinate space, while for window screencast
or area screencasts, we create standalone absolute pointer devices with
a single region each.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3228>
We already have the remote desktop session ID, and we'll soon need the
actual remote desktop session in the screen cast session, so pass it on
construction.
The old screen cast type is set implicitly instead.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3228>
A MetaEisViewport represents an absolute region backend by e.g. a
pointer device. There are two kinds: a standalone viewport, which
corresponds to a viewport that has no neighbours, and a non-standalone,
which represents a region of a global coordinate space.
The reason for having non-standalone viewports is to allow to mirror the
logical monitor layout of a desktop, while the standalone are meant to
represent things that are not part of the logical monitor layout.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3228>
How EIS will be used depends on its context, meaning we'll have multiple
EIS contexts that expose different things. To prepare for this remove
the global socket since that won't work with multiple contexts.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3228>
This fixes a compiler warning:
```
src/x11/events.c:523:1: warning: ‘get_event_name’ defined but not used [-Wunused-function]
523 | get_event_name (MetaX11Display *x11_display,
| ^~~~~~~~~~~~~~
```
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3223>
This used to be the behavior, until commit 5d35138df0 changed the meaning
of the return value of MetaCursorRendererClass::update_cursor(). This
made the user of pure-overlay cursors (singular, MetaWaylandTabletTool)
miss their overlays.
Change the return value, so that it matches the desired behavior of
a backend-less overlay-only cursor renderer.
Fixes: 5d35138df0 ("cursor-renderer: Make 'handled_by_backend' state 'needs_overlay'")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3218>
We react on changes to has_hw_cursor, but always try to inhibit if
there is no cursor sprite. While this looks like a reasonable optimization
with the typical situation of one cursor renderer, it may fall into
inhibiting twice without knowing to unwind, e.g.:
1. has_hw_cursor: TRUE, cursor_sprite: !=NULL -> inhibit
2. has_hw_cursor: FALSE, cursor_sprite: NULL -> inhibit
3. has_hw_cursor: TRUE, cursor_sprite: !=NULL -> uninhibit, but once
And this may also result in the CLUTTER_PAINT_FLAG_NO_CURSORS flag
staying on for Tablet cursors, that (so far) always use overlay paths.
This results in invisible tablet cursors after using the mouse at
least once.
Fixes: e52641c4b6 ("cursor-renderer/native: Replace HW cursor with KMS cursor manager")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3218>
Under strange timings, the GTK frames client may implicitly queue
relayouts that end up disagreeing with the latest frame size as
given by Mutter, this results in GTK calling XResizeWindow, and
Mutter plain out ignoring the resulting XConfigureRequestEvent
received.
This however makes GTK think there's pending resize operations,
so at the next resize it will freeze the window, until enough
resizes happened to thaw it again. This is seen as temporary
loss of frame-sync ness (e.g. frozen frame, and other weird
behavior).
In order to make GTK happy and balanced, reply to this
XConfigureRequest, even if just to ignore it in a more polite
way (we simply re-apply the size Mutter thinks the frame should
have, not GTK), this results in the right amount of
ConfigureNotify received on the frames client side, and the
surface to be thawed more timely, while enforcing the size as
managed by Mutter.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2837
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3189>
This is meant for compatibility purposes with the shell extensions
avoiding to break a bunch of them in the last minute and we would
drop it in the GNOME 46 release.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3128>
Currently, Meta/Cogl/Clutter makes use of cairo_rectangle_int_t despite
the existance of MetaRectangle.
In order to make MetaRectangle usable in Cogl/Clutter as well, Mtk would
provide such base types that are shared across the various private
libraries
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3128>
Dropped obsolete Free Software Foundation address pointing
to the FSF website instead as suggested by
https://www.gnu.org/licenses/gpl-howto.html
keeping intact the important part of the historical notice
as requested by the license.
Resolving rpmlint reported issue E: incorrect-fsf-address.
Signed-off-by: Sandro Bonazzola <sbonazzo@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3155>
This used to be the case before the refactor at commit 43cee4b6b6,
use_clipped_redraw would be unset before the larger check if has_buffer_age
was set, but clutter_damage_history_is_age_valid() was FALSE. This got
replaced by a check just on the latter, which will also be FALSE if
has_buffer_age is not present.
We have other means to achieve clipped redraws, so this slight change
culled all of them.
Fixes: 43cee4b6b6 ("stage-impl: Do clipped redraws when drawing offscreen")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2771
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3221>
This changes how state is tracked by introducing an explicit state. We
need this since we use asynchronous calls to the out of process
component that handles actual inhibitation, including idleness.
This means if inhibitations changes rapidly, we might end up with an
incorrect state if we e.g. try to uninhibit while we're currently trying
to inhibit.
This is done by adding a state variable that accounts for the pending
state, as well as the active state, with a function that looks at the
current conditions to derive what state we should be in, and what state
we are in, to decide what the next action should be.
For example, if we're trying to inhibit, but now wants to uninhibit,
we'll wait for the inhibit call to complete, recheck what we want, which
would result in an async uninhibit call being made.
Fixes: 388b534062 ("wayland: Implement idle inhibit protocol")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3219>
This fixes the following
1. Minimize window; minimize animation starts
2. Do something that immediately destroys the animated actor (e.g. terminate)
3. This triggered the timeline of the animation to emit a "stopped"
signal while all transitions of the actor were destroyed
Previously we'd implicitly animate the scale again (set_scale(..)) which
created a new transition The hash table iterator didn't like this and
abort():ed
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3213>
The 'suspend state' is meant to track whether a window is likely to be
visible any time soon. The hueristics for this are as follows:
* If a window is hidden, it will enter the 'hidden' state.
* If a window is visible, and unobscured, it will enter the 'active'
state.
* If a window is visible, but obscured by another window, it will enter
the 'hidden' state.
* If there is a mapped clone of a window, it will enter the 'active'
state.
* If the window has been in the 'hidden' state for 3 seconds, it will
enter the 'suspended' state.
This will eventually be communicated to Wayland clients so that they can
change their behaviour to e.g. save power.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3019>
