This fixes an issue analogous to bug 760330 for the X11 backend,
except on this backend we wouldn't crash accessing free'd memory.
Instead we're leaking watches since we steal them from the hash table
which means that when they're removed in
_meta_idle_monitor_watch_fire() they're no longer there and thus
they're never free'd.
https://bugzilla.gnome.org/show_bug.cgi?id=760476
Right now the XSync based idle monitoring code, will fetch all active
watches into a list, and then call their watch callbacks one by one
as necessary. If one watch callback invalidates another watch, the
list will contain free'd memory.
This commit makes sure to consult the hash table after ever call
of a watch callback, to ensure mutter never looks at freed memory.
Fixes crash reported on IRC by Laine Stump with his synergy setup.
https://bugzilla.gnome.org/show_bug.cgi?id=760330
The new tiling code, instead of based around "tiling states", is instead
based around constrained edges. This allows us to have windows that have
three constrained edges, but keep one free-floating, e.g. a window tiled
to the left has the left, top, and bottom edges constrained, but the
right edge can be left resizable.
This system also is easily extended to support corner tiling. We also,
using the new "size state" system, also keep normal, tiled, and
maximized sizes independently, allowing the maximize button to bounce
between maximized and tiled states without reverting to normal in
between. Dragging from the top will always restore the normal state,
though.
https://bugzilla.gnome.org/show_bug.cgi?id=751857
We can know the rotation modes supported by the driver, so
export these as our supported modes, and ensure these modes
are honored on the CRTC primary plane upon apply_configuration().
It is worth noting however that not all hardware will be
capable of supporting all rotation modes (in fact, most of
them won't). A driver independent solution should be in
place to back up the rotation modes unsupported by the
drivers, so this is still a partial solution.
The cursor renderer has also been changed to default to
software-based rendering anytime the cursor enters a
rotated CRTC. Another solution would be actually rotating
the DRM cursor planes, but then it requires applying rotation on
these per-CRTC, and actually transforming the pointer position by
the output matrix. This brings marginal gains, so we use the
"sw" rendered cursor, which will be transformed together with
the primary plane.
https://bugzilla.gnome.org/show_bug.cgi?id=745079
In case a window is hidden when we're ordered to make it transient to
a different parent we must re-evaluate its visibility status or we'll
get into an inconsistent state where the parent is visible and the
child isn't.
https://bugzilla.gnome.org/show_bug.cgi?id=759297
This seems like a more generally useful and intuitive behavior. Note
that, in X sessions, this is what already happened in practice since
meta_display_begin_grab_op() calls meta_window_grab_all_keys() which,
on X11, does meta_window_focus().
https://bugzilla.gnome.org/show_bug.cgi?id=756789
This is a really old behavior introduced in commit
585e362526 which is inconsistent since
it only applies to SSD windows.
If we really want this, we should focus the window elsewhere so that
it applies consistently to all windows.
https://bugzilla.gnome.org/show_bug.cgi?id=756789
Some applications, like Chromium, explicitly set their bounding region
to the client area when full-screen. Detect this case, and allow us to
fullscreen when this happens.
Don't update the stack until after setting the window->transient_for
field. Updating before will cause the stack transient-for constraint to
be missing until the next time constraints are applied.
https://bugzilla.gnome.org/show_bug.cgi?id=755606
The test runner sends a "show" command to the test clients and assumes
this was enough work done by the client to enable the compositor to map
the window. Now that we wait to show a Wayland window until the first
buffer is attached (see bug 750552), we need to make sure that we attach
a buffer before assuming that we have the final stacking order.
So, to in order to continue relying on "show" to be enough to actually
show a window, let the test client wait until it has drawn the first
frame.
This makes the tests using Wayland clients test non-flaky.
https://bugzilla.gnome.org/show_bug.cgi?id=754711
When managing a non-OR window we're required by the ICCCM to behave as
if we received a ConfigureRequest which means that we must generate a
synthetic ConfigureNotify even if the window isn't moved or resized
from its current (initial) geometry.
During MetaWindow's x11/wayland split a slight behavior change for x11
windows crept in. Before the code split, MetaWindow->rect was
initialized with the X window's geometry, but now we're not
initializing MetaWindowX11Private->client_rect which causes the checks
for whether it's necessary to move/resize the window in
meta_window_x11_move_resize_internal() to tell us that we do need to
move/resize which means we do an XConfigureWindow() call and don't
send the sythetic ConfigureNotify. But since the X window isn't really
moving, the XConfigureWindow() call doesn't cause the X server to
generate a ConfigureNotify which breaks some clients such as Java's
AWT.
We can fix this by setting MetaWindowX11Privatew->client_rect for both
OR and non-OR windows. We can set buffer_rect for non-OR windows as
well to simplify the code since it will be assigned the correct value
in meta_window_x11_move_resize_internal() .
https://bugzilla.gnome.org/show_bug.cgi?id=759492
During xwayland initialization we run main loop and dispatch wayland
events, so that xwayland can initialize. If some client during this
phase connects and creates surface, mutter crashes because
it is not initialized yet. If we bind wayland socket after xwayland
is initialized and main loop is not running anymore, no client can
connect to mutter during initialization and that is what we want.
https://bugzilla.gnome.org/show_bug.cgi?id=751845
GDesktopTouchpadScrollMethod was used instead of GDesktopTouchpadClickMethod
which became visible now that the former has been removed from
gsettings-desktop-schemas.
https://bugzilla.gnome.org/show_bug.cgi?id=759304
When the touchpad is two-finger scrolling capable, always enable it.
When the touchpad only supports edge scrolling (usually older devices, and
usually smaller devices), allow disabling the edge scrolling.
This requires a newer gsettings-desktop-schemas as the scroll-method key
was removed, and the edge-scroll-enabled key added.
https://bugzilla.gnome.org/show_bug.cgi?id=759304
Wine removes the minimize func from its Motif hints on full-screen
windows, because, as the Win32 API literally says, the minimize button
is indeed not visible on full-screen windows.
Given that this code was added to prevent minimizing a panel by
accident, I don't necessarily think that it's relevant anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=758186
Unsetting it in meta_display_handle_event() will make the pointer
emulation checks fail on TOUCH_END event handlers across clutter
actors, the sequence should still be considered as pointer emulating
at that time.
As we don't have a way to hook this post clutter event handling,
instead unset/reset it lazily on the next pointer emulating TOUCH_BEGIN
event, the checks would already fail on other sequences, even if the
pointer emulating touch ended earlier. The only extra thing we need
to take care about is sequence collision, at which point it's safe to
just unset the stored sequence if its new incarnation isn't flagged/
deemed as pointer emulating.
https://bugzilla.gnome.org/show_bug.cgi?id=756754
The max potential number of logical monitors (i.e. MetaMonitorInfos)
is the number of CRTCs, not the number of outputs.
In cases where we have more enabled CRTCs than connected outputs we
would end up appending more MetaMonitorInfos to the GArray than the
size it was initialized with which means the array would get
re-allocated rendering invalid some MetaCRTC->logical_monitor pointers
assigned previously and thus ending in crashes later on.
https://bugzilla.gnome.org/show_bug.cgi?id=751638
Use the xdg_shell XML file installed by wayland-protocols instead of
our own copy. This protocol has yet to go through any unstable naming,
but since we had an outdated (though wire compatible) version, some
minor changes were needed.
https://bugzilla.gnome.org/show_bug.cgi?id=758633
Remove our own copy of the pointer gestures protocol, and us the one
installed by wayland-protocols. This also means the new fixed unstable
naming conventions are used for the new version of the protocol, which
is reflected in the change. No functional changes were made, it is only
a rename.
https://bugzilla.gnome.org/show_bug.cgi?id=758633
When running as a native compositor, we can just do that. However, the
previous code must stay for whenever it's run as a X11 client.
Additionally, the fallback switch{} that transforms clutter 1-indexed
buttons into input.h event codes had to be adapted to the change introduced
in clutter commit 83b738c0e, where the 4-7 button range is kept clear for
compatibility with the X11 backend.
https://bugzilla.gnome.org/show_bug.cgi?id=758239
On the wire, Wayland specifies the refresh rate in milliHz. Mutter sends
the refresh rate in Hz, which confuses clients, e.g. weston-info:
interface: 'wl_output', version: 2, name: 4
mode:
width: 2560 px, height: 1440 px, refresh: 0 Hz,
flags: current preferred
interface: 'wl_output', version: 2, name: 5
mode:
width: 3200 px, height: 1800 px, refresh: 0 Hz,
flags: current preferred
and xrandr:
XWAYLAND0 connected 2560x1440+3200+0 600mm x 340mm
2560x1440@0.1Hz 0.05*+
XWAYLAND1 connected 3200x1800+0+0 290mm x 170mm
3200x1800@0.1Hz 0.03*+
Export the refresh rate in the correct units. For improved precision,
perform the KMS intermediate calculations in milliHz as well, and
account for interlaced/doublescan modes.
This is also consistent with what GTK+ expects:
timings->refresh_interval = 16667; /* default to 1/60th of a second */
/* We pick a random output out of the outputs that the window touches
* The rate here is in milli-hertz */
int refresh_rate = _gdk_wayland_screen_get_output_refresh_rate (wayland_display->screen,
impl->outputs->data);
if (refresh_rate != 0)
timings->refresh_interval = G_GINT64_CONSTANT(1000000000) / refresh_rate;
Where the 'refresh_rate' given is exactly what's come off the wire.
1000000000/60000 comes out as 16667, whereas divided by 60 is ...
substantially less.
https://bugzilla.gnome.org/show_bug.cgi?id=758653
If a client only ever sets the hint on window creation we'd never pick
the value. Also, include override redirect windows since the hint is
relevant to them too.
https://bugzilla.gnome.org/show_bug.cgi?id=758544
When managing window, we queue showing the window.
Under wayland, if we commit surface quickly enough,
the showing is unqueued and commit procedure takes care
of mapping and placing the window. In the oposite case,
queue is processed before client sets all we need and
then we have wrong size of window, which leads to broken placement.
Therefore force placement in queue only if the window should already
be mapped. If it is not mapped, we don't care where it is anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=751887
On Odroid U2 (exynos4412) the drm device is not bound to pci.
Open the detection to platform device of the drm subsystem, exclusive of
control devices.
https://bugzilla.gnome.org/show_bug.cgi?id=754911
