The previous implementation was dereferencing the sample pointer in
order to get the offset to subtract from the member pointer. The
resulting value is then only used to get a pointer to the member in
order to calculate the offset so it doesn't actually read from the
memory location and shouldn't cause any problems. However this is
probably technically invalid and could have undefined behaviour. It
looks like clang takes advantage of this undefined behaviour and
doesn't actually offset the pointer. It also generates a warning when
it does this.
This patch splits the _cogl_container_of macro into two
implementations. Previously the macro was always used in the list
iterator macros like this:
SomeType *sample = _cogl_container_of(list_node, sample, link)
Instead of doing that there is now a new macro called
_cogl_list_set_iterator which explicitly assigns to the sample pointer
with an initial value before assigning to it again with the real
offset. This redundant initialisation gets optimised out by compiler.
The second macro is still called _cogl_container_of but instead of
taking a sample pointer it just directly takes the type name. That way
it can use the standard offsetof macro.
https://bugzilla.gnome.org/show_bug.cgi?id=723530
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 1efed1e0a2bce706eb4901979ed4e717bb13e4e2)
Previously when a pipeline is added to the cache it would never be
removed. If the application is generating a lot of unique pipelines
this can end up effectively leaking a large number of resources
including the GL program objects. Arguably this isn't really a problem
because if the application is generating that many unique pipelines
then it is doing something wrong anyway. It also implies that it will
be recompiling shaders very often so the cache leaking will likely be
the least of the problems.
This patch makes it keep track of which pipelines in the cache are in
use. The cache now returns a struct representing the entry instead of
directly returning the pipeline. This entry contains a usage counter
which the pipeline backends can use to mark when there is a pipeline
alive that is using the cache entry. When the hash table decides that
it's a good time to prune some entries, it will make a list of all of
the pipelines that are not in use and then remove the least recently
used half of the pipelines. That way it is less likely to remove
pipelines that the application is actually regenerating often even if
they aren't in use all of the time.
When the cache is pruned the hash table makes a note of how small the
cache could be if it removed all of the unused pipelines. The hash
table starts pruning when there are more entries than twice this
minimum expected size. The idea is that if that case it hit then the
hash table is more than half full of useless pipelines so the
application is generating lots of redundant pipelines and it is a good
time to remove them.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit c21aac22992bb7fef5a8d0913130b8245e67f2eb)
Conflicts:
cogl/driver/gl/cogl-pipeline-fragend-glsl.c
cogl/driver/gl/cogl-pipeline-progend-glsl.c
cogl/driver/gl/cogl-pipeline-vertend-glsl.c
cogl/driver/gl/gl/cogl-pipeline-fragend-arbfp.c
Previously the private feature flags were stored in an enum and we
already had 31 flags. Adding the 32nd flag would presumably make it
add -2³¹ as one of the values which might cause problems. To avoid
this we'll just use an fixed-size array of longs and use indices for
the enum values like we do for the public features.
A slight complication with this is in the CoglDriverDescription where
we were previously using a static intialised value to describe the set
of features that the driver supports. We can't easily do this with the
flags array so instead the features are stored in a fixed-size array
of indices.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit d94cb984e3c93630f3c2e6e3be9d189672aa20f3)
Conflicts:
cogl/cogl-context-private.h
cogl/cogl-context.c
cogl/cogl-private.h
cogl/cogl-renderer.c
cogl/driver/gl/cogl-pipeline-opengl.c
cogl/driver/gl/gl/cogl-driver-gl.c
cogl/driver/gl/gl/cogl-pipeline-progend-fixed-arbfp.c
cogl/driver/gl/gles/cogl-driver-gles.c
cogl/driver/nop/cogl-driver-nop.c
This adds a #define for gl_PointCoord to all shaders so that it can be
accessed with a name in the Cogl namespace.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit c28fc054788e88627bcc2346f4c4c368870ff777)
Previously we would only add the #version pragma to shaders when
point sprite texture coordinates are enabled for a layer so that we
can access the gl_PointCoord builtin. However I don't think there's
any good reason not to just always request GLSL version 1.2 if it's
available. That way applications can always use gl_PointCoord without
having to enable point sprite texture coordinates.
This adds a glsl_version_to_use member to CoglContext which is used to
generate the #version pragma as part of the shader boilerplate. On
desktop GL this is set to 120 if version 1.2 is available, otherwise
it is left at 110. On GLES it is always left as 100.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit e4dfe8b07e8af111ecbcb0da20ff2a2875a2b5d0)
Conflicts:
cogl/driver/gl/gl/cogl-driver-gl.c
This adds a table of driver descriptions to cogl-renderer.c in order of
preference and when choosing what driver to use we now iterate the table
instead of repeating boilerplate checks. For handling the "default driver"
that can be specified when building cogl and handling driver overrides
there is a foreach_driver_description() that will make sure to iterate
the default driver first or if an override has been set then nothing but
the override will be considered.
This patch introduces some driver flags that let us broadly categorize
what kind of GL driver we are currently running on. Since there are
numerous OpenGL apis with different broad feature sets and new apis
may be introduced in the future by Khronos then we should tend to
avoid using the driver id to do runtime feature checking. These flags
provide a more stable quantity for broad feature checks.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit e07d0fc7441dddc3f0a2bc33a6a37d62ddc3efc0)
This removes cogl-queue.h and adds a copy of Wayland's embedded list
implementation. The advantage of the Wayland model is that it is much
simpler and so it is easier to follow. It also doesn't require
defining a typedef for every list type.
The downside is that there is only one list type which is a
doubly-linked list where the head has a pointer to both the beginning
and the end. The BSD implementation has many more combinations some of
which we were taking advantage of to reduce the size of critical
structs where we didn't need a pointer to the end of the list.
The corresponding changes to uses of cogl-queue.h are:
• COGL_STAILQ_* was used for onscreen the list of events and dirty
notifications. This makes the size of the CoglContext grow by one
pointer.
• COGL_TAILQ_* was used for fences.
• COGL_LIST_* for CoglClosures. In this case the list head now has an
extra pointer which means CoglOnscreen will grow by the size of
three pointers, but this doesn't seem like a particularly important
struct to optimise for size anyway.
• COGL_LIST_* was used for the list of foreign GLES2 offscreens.
• COGL_TAILQ_* was used for the list of sub stacks in a
CoglMemoryStack.
• COGL_LIST_* was used to track the list of layers that haven't had
code generated yet while generating a fragment shader for a
pipeline.
• COGL_LIST_* was used to track the pipeline hierarchy in CoglNode.
The last part is a bit more controversial because it increases the
size of CoglPipeline and CoglPipelineLayer by one pointer in order to
have the redundant tail pointer for the list head. Normally we try to
be very careful about the size of the CoglPipeline struct. Because
CoglPipeline is slice-allocated, this effectively ends up adding two
pointers to the size because GSlice rounds up to the size of two
pointers.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 13abf613b15f571ba1fcf6d2eb831ffc6fa31324)
Conflicts:
cogl/cogl-context-private.h
cogl/cogl-context.c
cogl/driver/gl/cogl-pipeline-fragend-glsl.c
doc/reference/cogl-2.0-experimental/Makefile.am
Previously CoglPipelineSnippetList was using the BSD embedded list
type with a mini struct to combine the list node with a pointer to the
snippet. This is effectively equivalent to just using a GList so we
might as well do that. This will help if we eventually want to get rid
of cogl-queue.h
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 54a168f3c7829c427d54ab517533bb9f7384d022)
Previously the sampler uniform declarations such as cogl_sampler0 were
generated by walking the list of layers in the shader state. This had
two problems. Firstly it would only generate the declarations for
layers that have been referenced. If a layer has a combine mode of
replace then the samplers from previous layers couldn't be used by
custom snippets. Secondly it meant that the samplers couldn't be
referenced by functions in the declarations sections because the
samplers are declared too late.
This patch fixes it to generate the layer declarations in the backend
start function using all of the layers on the pipeline instead. In
addition it adds the sampler declarations to the vertex shader as they
were previously missing.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 1824df902bbb9995cae6ffb7a413913f2df35eef)
Conflicts:
cogl/driver/gl/cogl-pipeline-fragend-glsl.c
cogl/driver/gl/cogl-pipeline-vertend-glsl.c
This adds hook points to add global function and variable declarations
to either the fragment or vertex shader. The declarations can then be
used by subsequent snippets. Only the ‘declarations’ string of the
snippet is used and the code is directly put in the global scope near
the top of the shader.
The reason this is necessary rather than just adding a normal snippet
with the declarations is that for the other hooks Cogl assumes that
the snippets are independent of each other. That means if a snippet
has a replace string then it will assume that it doesn't even need to
generate the code for earlier hooks which means the global
declarations would be lost.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit ebb82d5b0bc30487b7101dc66b769160b40f92ca)
This remove cogl-internal.h in favour of using cogl-private.h. Some
things in cogl-internal.h were moved to driver/gl/cogl-util-gl-private.h
and the _cogl_gl_error_to_string function whose prototype was moved from
cogl-internal.h to cogl-util-gl-private.h has had its implementation
moved from cogl.c to cogl-util-gl.c
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 01cc82ece091aa3bec4c07fdd6bc9e5135fca573)
This adds back compatibility for CoglShaders that reference the
cogl_tex_coord_in[] or cogl_tex_coord_out[] varyings. Unlike the
previous way this was done this patch maintains the use of layer numbers
for attributes and maintains forwards compatibility by letting shaders
alternatively access the per-layer tex_coord varyings via
cogl_tex_coord%i_in/out defines that index into the array.
This removes the need to maintain an array of tex_coord varyings and
instead we now just emit a varying per-layer uniquely named using a
layer_number infix like cogl_tex_coord0_out and cogl_tex_coord0_in.
Notable this patch also had to change the journal flushing code to use
pipeline layer numbers to determine the name of texture coordinate
attributes.
We now also break batches by using a deeper comparison of layers so
such that two pipelines with the same number of layers can now cause a
batch break if they use different layer numbers.
This adds an internal _cogl_pipeline_layer_numbers_equal() function that
takes two pipelines and returns TRUE if they have the same number of
layers and all the layer numbers are the same too, otherwise it returns
FALSE.
Where we used to break batches based on changes to the number of layers
we now break according to the status of
_cogl_pipeline_layer_numbers_equal
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit e55b64a9cdc93285049d9b969bef67484c2d9fb3)
Note: this will cause a temporary regression for the Cogl 1.x CoglShader
api since it will break compatibility with existing shaders that
reference the texture varyings from the fragment shader.
The intention is to follow up with another patch to add back
CoglShader compatibility.
This adds a new CoglDriver for GL 3 called COGL_DRIVER_GL3. When
requested, the GLX, EGL and SDL2 winsyss will set the necessary
attributes to request a forward-compatible core profile 3.1 context.
That means it will have no deprecated features.
To simplify the explosion of checks for specific combinations of
context->driver, many of these conditionals have now been replaced
with private feature flags that are checked instead. The GL and GLES
drivers now initialise these private feature flags depending on which
driver is used.
The fixed function backends now explicitly check whether the fixed
function private feature is available which means the GL3 driver will
fall back to always using the GLSL progend. Since Rob's latest patches
the GLSL progend no longer uses any fixed function API anyway so it
should just work.
The driver is currently lower priority than COGL_DRIVER_GL so it will
not be used unless it is specificly requested. We may want to change
this priority at some point because apparently Mesa can make some
memory savings if a core profile context is used.
In GL 3, getting the combined extensions string with glGetString is
deprecated so this patch changes it to use glGetStringi to build up an
array of extensions instead. _cogl_context_get_gl_extensions now
returns this array instead of trying to return a const string. The
caller is expected to free the array.
Some issues with this patch:
• GL 3 does not support GL_ALPHA format textures. We should probably
make this a feature flag or something. Cogl uses this to render text
which currently just throws a GL error and breaks so it's pretty
important to do something about this before considering the GL3
driver to be stable.
• GL 3 doesn't support client side vertex buffers. This probably
doesn't matter because CoglBuffer won't normally use malloc'd
buffers if VBOs are available, but it might but worth making
malloc'd buffers a private feature and forcing it not to use them.
• GL 3 doesn't support the default vertex array object. This patch
just makes it create and bind a single non-default vertex array
object which gets used just like the normal default object. Ideally
it would be good to use vertex array objects properly and attach
them to a CoglPrimitive to cache the state.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 66c9db993595b3a22e63f4c201ea468bc9b88cb6)
Since we used to support hybrid fixed-function + glsl pipelines when
running with OpenGL there were numerous differences in how we handled
codegen and uniform updates between GLES2 and full OpenGL. Now that we
only support end-to-end glsl pipelines this patch can largely unify how
we handle GLES2 and OpenGL.
Most notably we now never use the builtin attribute names. This should
also make it easy for us to support creating strict OpenGL 3.1 contexts
where the builtin names have been removed.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 2701b93f159bf2d3387cedf2d06fe921ad5641f3)
To aid with backporting patches from master made after the deprecated
CoglShader api was removed this patch adds the cogl-glsl- files that
have been added on master so we should get less conflicts when cherry
picking.
This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of
setting up the state of a pipeline:
» fixed; where the vertex and fragment processing are implemented
using fixed function opengl apis.
» fixed-arbfp; where vertex processing is implemented using fixed
function opengl apis but fragment processing is implemented
using the ARB Fragment Processing language.
» glsl; there vertex and fragment processing are both implemented
using glsl.
This means we avoid unusual, combinations such as glsl for vertex
processing and arbfp for fragment processing, and also avoid pairing
fixed-function vertex processing with glsl fragment processing which we
happen to know hits some awkward code paths in Mesa that lead to poor
performance.
As part of this change, the progend now implies specific vertend and
fragend choices so instead of associating a vertend and fragend with a
pipeline we now just associate a progend choice.
When flushing a pipeline and choosing what progend to use, we now call a
progend->start() method that is able to determine if the vertend and
fragend together will be able to handle the given pipeline so the
vertend and fragend ->start() methods no longer need to return a boolean
status.
Since we now don't need to support glsl used in conjunction with fixed
function this will allow us to avoid ever using OpenGL builtin attribute
names, though this patch doesn't change that yet.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
As part of an effort towards being able to write non-opengl based
backends for Cogl this moves most of the opengl specific code under
drivers/gl. drivers/gl and drivers/gles have been moved to
drivers/gl/gl and drivers/gl/es respectively.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 7dc482facb0a265c7f48660079e7e12dd7a2813e)
