A per-window _MUTTER_HINTS property allowing plugins to use custom hints. The
property holds a colon separated list of key=value pairs; plugin-specific keys
must be suitably namespaced, while 'mutter-' prefix is reserved for internal
Mutter use only.
This commit adds MetaWindow::mutter-hints property, and
meta_window_get_mutter_hints() accessor, as well as the internal machinery for
reading and updating of the hints.
https://bugzilla.gnome.org/show_bug.cgi?id=613123
To replace all calls to deprecated code, GTK+ 2.20 is required - add
some basic compatibility code, so that it is still possible to build
mutter with GTK+ 2.18 when not using -DGSEAL_ENABLE.
https://bugzilla.gnome.org/show_bug.cgi?id=595496
COGL bug http://bugzilla.openedhand.com/show_bug.cgi?id=2110 results
in pending drawing at the time of cogl_offscreen_new_to_texture() going
to the newly created framebuffer rather than the stage.
This would result in most windows being missing for the first frame
when a new window is mapped.
Work around this by calling cogl_flush() before
cogl_offscreen_new_to_texture().
https://bugzilla.gnome.org/show_bug.cgi?id=618138
The beginning maximization/unmaximization don't go through
start_effect_simple(), so we need to freeze the window
separately.
Change MutterWindow.freeze_count to a signed integer for
consistency with other counts, and so the logic for
checking for errors works properly.
https://bugzilla.gnome.org/show_bug.cgi?id=616546
This changes the way we handle Damage events so instead of getting an
event when the damage region of a pixmap becomes non-empty we now get
sent all damage rectangles and stream those all though to
ClutterX11TexturePixmap using clutter_x11_texture_pixmap_update_area()
For Clutter 1.2, ClutterGLXTexturePixmap was updated so that calls to
clutter_x11_texture_pixmap_update_area are now cheap (glXBindTexImageEXT
calls are now deferred until just before painting) and since
ClutterGLXTexturePixmap is now capable of queueing clipped redraws that
can result in only updating a sub-region of the stage during a repaint
cycle (and using glXCopySubBufferMESA to present the sub-region redraw
to the front buffer) this should improve performance and reduced power
consumption for a range of use cases. (For example viewing a website
that has animated adverts doesn't force the whole screen to be redrawn
for each frame of the advert)
Besides being able to take advantage of glXCopySubBuffer to only update
a small region of the stage the fact that this patch makes Mutter now
request RawRectangles from the X server means we no longer do a
synchronous X request for a complete Damage Region for every window
damaged each frame. This should also improve performance.
CLUTTER_PAINT=redraws can be used to visualize what parts of the stage
are redrawn and with this patch applied I can open a terminal and as I
type I see that only the damaged areas of the terminal are being
redrawn.
In the case where a mutter window is created for an X Window that is
already mapped then we weren't calling mutter_window_mark_for_repair and
so we weren't calling XCompositeNameWindowPixmap e.g. for menu windows.
This doesn't get noticed because as soon as some damage gets delivered
for such windows the pixmap will be named anyway, but if we were to
change how damage is handled this would result in broken menus.
We now call mutter_window_mark_for_repair in mutter_window_new when the
given Window is already mapped.
It's nice to indicate when a title is truncated with an ellipsis.
Because themes may draw a title multiple times to draw a shadow, or
may include the window icon within the title area, we can't determine
the proper ellipsization width automatically, so add an optional
attribute to the <title/> element "ellipsize_width" which, if set,
is the width to ellipsize at.
This is only enabled if a theme version of 3.1 is required.
When it's not set, we keep the old behavior of just letting the
title be clipped with a hard edge.
https://bugzilla.gnome.org/show_bug.cgi?id=591842
Sometimes you want to position something (usually the title) to be centered
with respect to the entire frame instead of centered with respect to the
individual piece currently being drawn.
This patch adds frame_x_center and frame_y_center variables that represent
the X/Y centers of the frame in the coordinate system of the piece being
drawn.
The theme version is bumped from 3.0 to 3.1 (3.0 is just the new version
system, 3.1 will have all the features we add for Mutter-2.28.)
position expressions
https://bugzilla.gnome.org/show_bug.cgi?id=591842
Although multi-screen support has not been tested and probably
doesn't fully work, the basic setup for multi-screen is that
we have the same list of plugins for all screens, but a different
instance of the plugins for each screen.
To allow plugins to do setup that is screen independent and needs
to occur early in the setup process, we identify a "default plugin
manager" and load (but not start) that plugin manager's plugins
immediately after we know our list of plugins.
That plugin manager is then reused for the first screen we open
and the plugins are started at that time. Separate plugin managers
are loaded and started for any other screens we open.
(A plugin could keep track of whether the screen-independent
setup has been done in a static variable, or it could do everything
in a way that is safe to do repeatedly.)
https://bugzilla.gnome.org/show_bug.cgi?id=615586
Allow a plugin to redirect preferences from one GConf location
to another GConf location. This is useful for keys that need to be
set differently in a plugin-managed environment (like GNOME Shell)
as compared to in standalone Metacity.
Overriding is implemented by overwriting the keys in the arrays
of preferences; a list of the current overrides is stored to allow
proper memory management when an override is itself overriden.
(we need to know whether to free the old keys or not)
This patch cleans up the comments in prefs.c a bit as well; some ideas
about less-exciting potential improvements were removed to make the
comments explaining the structure easier to figure out.
https://bugzilla.gnome.org/show_bug.cgi?id=615586
Rather than using the plugin objects constructed() method for doing
setup that requires the MetaScreen, add an explicit start() method
that is called after the screen is set.
The reason for this is that this allows plugin objects to be created
early before the bulk of Metacity setup, which then allows plugins
to affect how the setup happens. (For example, to change the way
that preferences are loaded.)
This is an incompatible change, since 'screen' is now not set in the
constructed method, so the plugin API version is bumped.
https://bugzilla.gnome.org/show_bug.cgi?id=615586
The current mechanism of metacity-theme-1.xml and metacity-theme-2.xml
is not flexible for allowing small-scale additions. With this patch
we bump the major version version once more to metacity-theme-3.xml
and add a single feature:
Any element in the DTD can have an attribute:
version="[<|<=|=>|>] MAJOR.MINOR"
And it will be ignored unless the predicate is met. (< and > should
be to be entity escaped as < and >)
This allows having alternate sections of the theme file for older and
newer version.
* Required GLib version is bumped to 2.14 so we can parse versions
with a regular expression.
* We switch internal version numbers to be "1000 * major + minor"
* We keep a stack of the maximum required version for the current portion
the XML tree so that the "cannot use versions you don't require" stricture
of the old code can be made local to a subpart of the tree.
* A version on the top metacity_theme element causes the entire file to
be ignored; this allows having one metacity-theme-3.xml for version 3.2
and newer (say) and a metacity-1.xml for everything old.
Actual new features will be added starting with 3.1 - 3.0 is just the
version="" feature.
http://bugzilla.gnome.org/show_bug.cgi?id=592503
Simplify code to find the right theme to load and loading it by moving
all the loading code into a load_theme() helper function, and making
meta_load_theme() use that as it searches through the directories.
Look for old-version themes even when loading relative to the working
in debug mode.
Don't unnecessarily duplicate and then free info->theme_file and
info->theme_dir.
http://bugzilla.gnome.org/show_bug.cgi?id=592503
The change to using gconf_client_all_entries() in commit 2d57b1b4
meant that workspaces without a GConf key for their name were not
getting a name at all. Fix this by doing a post-processing loop
to set workspace names that were not otherwise set.
Alternate to patch from Tomas Frydrych
https://bugzilla.gnome.org/show_bug.cgi?id=613136
Since all windows are now MetaWindows as well as compositor
windows, there's no reason to keep a compositor-specific hash table
mapping from XID to MutterWindow.
This reduces complexity and removes a call to XQueryTree that could
potentially produce a BadWindow error if not error-trapped.
https://bugzilla.gnome.org/show_bug.cgi?id=613398
meta_compositor_process_event uses meta_error_trap_push/pop for
every event processed by meta_compositor_process_event which isn't needed
and can cause performance problems.
https://bugzilla.gnome.org/show_bug.cgi?id=613398
- Specify a minimum version of Clutter-1.2.0
- Remove conditionalizatin and always use Clutter-1.1 framebuffer
API rather than raw GL fbos
- Replace deprecated cogl_material/texture_unref() with
cogl_handle_unref()
https://bugzilla.gnome.org/show_bug.cgi?id=610862
