This is inspired by 98892391d7 where the usage of
`g_signal_handler_disconnect()` without resetting the corresponding
handler id later resulted in a bug. Using `g_clear_signal_handler()`
makes sure we avoid similar bugs and is almost always the better
alternative. We use it for new code, let's clean up the old code to
also use it.
A further benefit is that it can get called even if the passed id is
0, allowing us to remove a lot of now unnessecary checks, and the fact
that `g_clear_signal_handler()` checks for the right type size, forcing us
to clean up all places where we used `guint` instead of `gulong`.
No functional changes intended here and all changes should be trivial,
thus bundled in one big commit.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/940
Properly take the panel_orientation_transform into account in
update_monitor_crtc_cursor. This fixes us sometimes drawing the cursor
on two monitors at the same time as we did not properly swap the crtc
width/height when a panel_orientation_transform is active.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/927
Create the intermediate shadow framebuffer for use exclusively when a
shadowfb is required.
Keep the previous offscreen framebuffer is as an intermediate
framebuffer for transformations only.
This way, we can apply transformations between in-memory framebuffers
prior to blit the result to screen, and achieve acceptable performance
even with software rendering on discrete GPU.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/877
If we did a mode set, the gamma may have been changed by the kernel, and
if we didn't also update the gamma in the same transaction, we have no
way to predict the current gamma ramp state. In this case, read the
gamma state directly from KMS.
This should be relatively harmless regarding the race conditions the
state prediction was meant to solve, as the worst case is we get none or
out of date gamma ramps; and since this is for when gamma ramps are not
updated at mode setting time, we'd get intermediate gamma state to begin
with, so it's not worse than what we currently do anyway.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/851https://gitlab.gnome.org/GNOME/mutter/merge_requests/840
We can't just update the state of the connector and CRTC from KMS since
it might contain too new updates, e.g. from a from a future hot plug. In
order to not add ad-hoc hot plug detection everywhere, predict the state
changes by looking inside the MetaKmsUpdate object, and let the hot-plug
state changes happen after the actual hot-plug event.
This fixes issues where connectors were discovered as disconnected while
doing a mode-set, meaning assumptions about the connectedness of
monitors elsewhere were broken until the hot plug event was processed.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/782https://gitlab.gnome.org/GNOME/mutter/merge_requests/826
It was not the lack of forcing the shadow fb that caused slowness, but
rather due to the method the shadow fb content was copied onto the
scanout fb. With 'clutter: Use cogl_blit_framebuffer() for shadow FB'
we'll use a path that shouldn't be slow when copying onto the scanout
fb.
Also 437f6b3d59 accidentally enabled
shadow fb when using hw accelerated contexts, due to the cap being set
to 1 in majority of drivers. While the kernel documentation for the
related field says "hint to userspace to prefer shadow-fb rendering",
the name of the hint when exposed to userspace is
DRM_CAP_DUMB_PREFER_SHADOW, thus should only be taken into consideration
for dumb buffers, not rendering in general.
This reverts commit 437f6b3d59.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/818
The commit 'renderer/native: Use shadow fb on software GL if preferred'
attempted to force using a shadow fb when using llvmpipe in order to
speed up blending, but instead only did so when llvmpipe AND the drm
device explicityl asked for it.
Now instead always force it for llvmpipe and other software rendering
backends, and otherwise just query the drm device (i.e.
DRM_CAP_DUMB_PREFER_SHADOW).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/807
When suspending, the devices are removed and the virtual device
associated with the corresponding core pointer is disposed.
Add the pointer accessibility virtual device to the core pointer
on resume to restore pointer accessibility on resume if enabled.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/761
The end goal is to have all clutter backend code in src/backends. Input
is the larger chunk of it, which is now part of our specific
MutterClutterBackendNative, this extends to device manager, input devices,
tools and keymap.
This was supposed to be nice and incremental, but there's no sane way
to cut this through. As a result of the refactor, a number of private
Clutter functions are now exported for external backends to be possible.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/672
Add meta-kms and meta-monitor-manager-kms listener for the udev
device-removed signal and on this signal update the device state /
re-enumerate the monitors, so that the monitors properly get updated
to disconnected state on GPU removal.
We really should also have meta-backend-native remove the GPU itself
from our list of GPU objects. But that is more involved, see:
https://gitlab.gnome.org/GNOME/mutter/issues/710
This commit at least gets us to a point where we properly update the
list of monitors when a GPU gets unplugged; and where we no longer
crash the first time the user changes the monitor configuration after
a GPU was unplugged.
Specifically before this commit we would hit the first g_error () in
meta_renderer_native_create_view () as soon as some monitor
(re)configuration is done after a GPU was unplugged.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/713
drmModeGetConnector may fail and return NULL, this may happen when
a connector is removed underneath us (which can happen with e.g.
DP MST or GPU hot unplug).
Deal with this by skipping the connector when enumerating and by
assuming it is disconnected when checking its connection state.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/713
drmModeGetCrtc may fail and return NULL. This will trigger when
meta_kms_crtc_update_state gets called from meta_kms_update_states_sync
after a GPU has been unplugged leading to a NULL pointer deref causing
a crash.
This commit fixes this by checking for NULL and clearing the current_state
when NULL is returned.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/713
Before this commit meta_kms_crtc_read_state was overwriting the
entire MetaKmsCrtcState struct stored in crtc->current_state including
the gamma (sub)struct.
This effectively zero-s the gamma struct each time before calling
read_gamma_state, setting the pointers where the previous gamma values
were stored to NULL without freeing the memory. Luckily this zero-ing
also sets gamma.size to 0, causing read_gamma_state to re-alloc the
arrays on each meta_kms_crtc_update_state call. But this does mean that
were leaking the old gamma arrays on each meta_kms_crtc_update_state call.
This commit fixes this by making meta_kms_crtc_read_state only overwrite
the other values in the MetaKmsCrtcState struct and leaving the gamma
sub-struct alone, this will make read_gamma_state correctly re-use the
gamma tables if the gamma table size is unchanged; or re-alloc them
(freeing the old ones) if the size has changed, fixing the memory leak.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/713
The "device-added" signal should use g_cclosure_marshal_VOID__OBJECT not
g_cclosure_marshal_VOID__VOID.
Instead of fixing this manually, simply replace the closure function for
both signals with NULL, glib will then automatically set the correct
va_marshaller.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/713
COPY_MODE_PRIMARY has two paths, automatically chosen. For debugging purposes,
e.g. why is my DisplayLink screen slowing down the whole desktop, it will be
useful to know which copy path is taken. Debug prints are added to both when
the primary GPU copy succeeds the first time and when it fails the first time.
This is not the full truth, because theoretically the success/failure could
change every frame, but we don't want to spam the logs (even in debug mode)
every frame. In practise, it should be rare for the success or failure to ever
change. Hence, saying what happened on the first time is enough. This does
indicate if it ever changes even once, too, so we know if that unexpected thing
happens.
The debug prints are per secondary GPU since there could be several.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
When the preferred path META_SHARED_FRAMEBUFFER_COPY_MODE_SECONDARY_GPU cannot
be used, as is the case for e.g. DisplayLink devices which do not actually have
a GPU, try to use the primary GPU for the copying before falling back to
read-pixels which is a CPU copy.
When the primary GPU copy works, it should be a significant performance win
over the CPU copy by avoiding stalling libmutter for the duration.
This also renames META_SHARED_FRAMEBUFFER_COPY_MODE_* because the new names are
more accurate. While the secondary GPU copy is always a GPU copy, the primary
copy might be either a CPU or a GPU copy.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
This bit of code was more or less duplicated in meta-renderer-native-gles3.c
and meta-wayland-dma-buf.c. Start consolidating the two implementations by
moving the *-gles3.c function into meta-egl.c and generalizing it so it could
also accommodate the meta-wayland-dma-buf.c usage.
The workaround in the *-gles3.c implementation is moved to the caller. It is
the caller's responsibility to check for the existence of the appropriate EGL
extensions.
Commit 6f59e4858e worked around the lack of
EGL_EXT_image_dma_buf_import_modifiers with the assumption that if the modifier
is linear, there is no need to pass it into EGL. The problem is that not
passing a modifier explicitly to EGL invokes implementation-defined behaviour,
so we should not have that workaround in meta-egl.c.
This patch intends to be pure refactoring, no behavioral changes. The one
change is the addition of g_assert to catch overwriting arbitrary memory.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
We currently don't handle the lack of DRM_CLIENT_CAP_UNIVERSAL_PLANES
KMS capability. Fail constructing a device that can't handle this up
front, so later made assumptions, such as presence of a primary plane,
are actually valid.
If we want to support lack of said capability, the required planes need
to be emulated by a dummy MetaKmsPlane object.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/665
There were fallbacks in place in case IN_FORMATS didn't yield any usable
formats: the formats in the drmModePlane struct, and a hard coded array.
The lack of these fallbacks in place could result in a segfault as code
using the supported plane formats assumed there were at least something
in there.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/662
