Returns the matching tiled window. This is the topmost tiled window in a
complementary tile mode that is:
- on the same monitor;
- on the same workspace;
- spanning the remaining monitor width;
- there is no 3rd window stacked between both tiled windows that's
partially visible in the common edge.
https://bugzilla.gnome.org/show_bug.cgi?id=643075
For maximized windows, titlebars cannot be used to reposition or
scale the window, so if an application does not use it to convey
useful information (other than the application name), the screen
space occupied by titlebars could be put to better use.
To account for this use case, a setting for requesting that windows'
titlebars should be hidden during maximization has been added to
GTK+, add support for this in the window manager.
https://bugzilla.gnome.org/show_bug.cgi?id=665617
meta_window_get_current_tile_area() computes the area where the tiled window
should be based on the current pointer position but that's only meaningful
when the user is actually dragging the window.
When running the tiling constrain the pointer might be on other monitor and at
that point the window jumps to this other monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=642580
When using more than one monitor, tiled maximization can be triggered with the
pointer in one monitor while most of the window area remains in another. This
means that the maximization constraint would maximize the window into the wrong
monitor as it uses the work area size/position as target.
Fix this by using the current tile area as target size/position.
https://bugzilla.gnome.org/show_bug.cgi?id=657519
If XRANDR is availible, we track the first (or primary) output per
crtc (== xinerama monitor) so when the monitors change we can try
to find the same output and move windows there. If we can't find the
original monitor in the new set (or XRANDR is not supported) we move
the window to the primary monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=645408
Different bits of code were using slightly different checks to test
whether a window was an attached dialog. Add a new
meta_window_is_attached_dialog(), and use that everywhere.
Also, freeze the is-attached status when the window is first shown,
rather than recomputing it each time the caller asks, since this could
cause problems if a window changes its type after it has already been
attached, etc. However, if an attached window's parent is destroyed,
or an attached window changes its transient-for, then fix things up by
destroying the old MetaWindow and creating a new one (causing
compositor unmap and map events to be fired off, allowing the display
of the window to be fixed up).
Remove some code in display.c that tried to fix existing windows if
the gconf setting changed, but which didn't actually do anything (at
least under gnome-shell). However, if 654643 was fixed then the new
behavior with this patch would be that changing the gconf setting
would affect new dialogs, but not existing ones.
https://bugzilla.gnome.org/show_bug.cgi?id=646761
Since version 3.0, GTK+ has support for style variants. At the moment,
themes may provide a dark variant, which can be requested by
applications via GtkSettings. The requested variant is exported to
X11 via the _GTK_THEME_VARIANT property - support this property, in
order to pick up the correct style variant in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=645355
An ARGB window with a frame is likely something like a transparent
terminal. It looks awful (and breaks transparency) to draw a big
opaque black shadow under the window, so clip out the region under
the terminal from the shadow we draw.
Add meta_window_get_frame_bounds() to get a cairo region for the
outer bounds of the frame of a window, and modify the frame handling
code to notice changes to the frame shape and discard a cached
region. meta_frames_apply_shapes() is refactored so we can extract
meta_frames_get_frame_bounds() from it.
https://bugzilla.gnome.org/show_bug.cgi?id=635268
We need to redraw a window's shadow any time the value of
meta_window_appears_focused() changes. So make that into a property so
we can get notifications on it.
https://bugzilla.gnome.org/show_bug.cgi?id=636904
Sometimes on_all_workspaces is requested by the client/user, and sometimes
its calculated implicitly due to internal state. We split this up so that
we know when the user has explicitly asked for sticky window, when e.g.
setting wmspec properties or storing session info.
on_all_workspaces means this window is visible on all workspaces.
on_all_workspaces_requested, means the user explicitly made the window
sticky somehow (via imported session, _NET_WM_STATE from another wm,
toggled in the window menu, etc). It always implies on_all_workspaces is
TRUE.
Right now the only time we set on_all_workspaces is for override-redirect
windows, but later we can add a "windows on non-primary monitor are not
part of the workspace switching" feature.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
If mutter is going to be a "real" library, then it should install its
includes so that users can do
#include <meta/display.h>
rather than
#include <display.h>
So rename the includedir accordingly, move src/include to src/meta,
and fix up all internal references.
There were a handful of header files in src/include that were not
installed; this appears to have been part of a plan to keep core/,
ui/, and compositor/ from looking at each others' private includes,
but that wasn't really working anyway. So move all non-installed
headers back into core/ or ui/.
https://bugzilla.gnome.org/show_bug.cgi?id=643959
Drag operations may be cancelled, in which case the dragged window
should be restored to the position/state it had when the drag was
initialized. In order to do this for tiled states, the original
state has to be saved during the operation.
https://bugzilla.gnome.org/show_bug.cgi?id=639988
The previous tiling state of a grabbed window should be restored
if the drag operation is cancelled (by hitting the Escape key).
This might involve to meta_window_tile(), so export the function
in window-private.h.
https://bugzilla.gnome.org/show_bug.cgi?id=639988
It may be desirable for theme authors to treat side-by-side tiled
windows differently, for instance to give the edge-touching border
a width of 0, so add additional frame states for tiled windows.
https://bugzilla.gnome.org/show_bug.cgi?id=637330
In addition to the existing side-by-side tiling modes, this commit
adds a new "maximize" tiling mode. It allows the user to maximize
their windows (in other words, tile with the edge panels) by dragging
their window to the top edge of the monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
A maximized window can't be resized from the screen edges (preserves
Fitts law goodness for the application), but it's still possible
to start a resize drag with alt-middle-button. Currently we just
don't let the user resize the window, while showing drag feedback;
it's more useful to let the user "break" out from the resize.
This provides a fast way to get a window partially aligned with
the screen edges - maximize, then alt-drag it out from one edge.
Behavior choices in this patch:
- You can drag out a window out of maximization in both directions -
smaller and larger. This can be potentilaly useful in multihead.
- Dragging a window in only one direction unmaximizes the window
fully, rather than leaving it in a horizontally/vertically
maximized state. This is done because the horizontally/vertically
maximzed states don't have clear visual representation and can
be confusing to the user.
- If you drag back to the maximized state after breaking out,
maximization is restored, but you can't maximize a window by
dragging to the full size if it didn't start out that way.
A new internal function meta_window_unmaximize_with_gravity() is
added for implementing this; it's a hybrid of
meta_window_unmaximize() and meta_window_resize_with_gravity().
Port of the metacity patch from Owen Taylor in bug 622517.
https://bugzilla.gnome.org/show_bug.cgi?id=629931
When dragging a window over a screen edge and dropping it there,
maximize it vertically and scale it horizontally to cover the
corresponding half of the current monitor.
Whenever a "hot area" which triggers this behavior is entered, an
indication of window's target size is displayed after a short delay
to avoid distraction when moving a window between monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=606260
Add a preference /apps/mutter/general/attach_modal_dialogs. When true, instead
of having independent titlebars, modal dialogs appear attached to the titlebar
of the parent window and are moved together with the parent window.
https://bugzilla.gnome.org/show_bug.cgi?id=612726
A per-window _MUTTER_HINTS property allowing plugins to use custom hints. The
property holds a colon separated list of key=value pairs; plugin-specific keys
must be suitably namespaced, while 'mutter-' prefix is reserved for internal
Mutter use only.
This commit adds MetaWindow::mutter-hints property, and
meta_window_get_mutter_hints() accessor, as well as the internal machinery for
reading and updating of the hints.
https://bugzilla.gnome.org/show_bug.cgi?id=613123
For some consumers it's significantly more convenient to be able
to directly connect to a signal on the Window to know when
Mutter is done with it, rather than having to connect to each
Workspace object (and handle workspace additions, etc.).
Similarly, add window-created which acts globally.
https://bugzilla.gnome.org/show_bug.cgi?id=598289
mutter-window.c originally grew an #include "window-private.h" for
window->override_redirect, but that was just fixed. However since
then it also ended up relying on a few other minor private bits.
To fix that, add meta_window_is_mapped, promote meta_window_toplevel_is_mapped
to public, and use the public MetaDisplay accessor.
Previously, changes to the visibility of a window could be indicated
by meta_compositor_map_window(), meta_compositor_unminimize_window(),
meta_compositor_set_window_hidden(), etc, with the exact behavior
depending on the 'live_hidden_windows' preference.
Simplify this so that visibility is controlled by:
meta_compositor_show_window()
meta_compositor_hide_window()
With an 'effect' parameter provided to indicate the appropriate
effect (CREATE/UNMINIMIZE/MINIMIZE/DESTROY/NONE.)
The map state of the window is signalled separately by:
meta_compositor_map_window()
meta_compositor_unmap_window()
And is used only to control resource handling.
Other changes:
* The desired effect on show/hide is explicitly stored in
MetaWindow, avoiding the need for the was_minimized flag.
At idle, once we calculate the window state, we pass the
effect to the compositor if it matches the new window
state, and then clear the effect to start over for future
map state changes.
* meta_compositor_switch_workspace() is called before any windows
are hidden or shown, allowing the compositor to avoid hiding
or showing an effect for windows involved in the switch.
http://bugzilla.gnome.org/show_bug.cgi?id=582341
* Handling of post-effect cleanups for MutterWindow are
simplified - instead of trying to do different things based
on the individual needs of different effects, we just wait until
all effects complete and sync the window state to what it
should be.
* On unmap, once we destroy the pixmap, we tell ClutterX11Pixmap
that we've done so, so it can clean up and unbind. (The
unbinding doesn't seem to be working properly because of
ClutterGLXPixmap or video driver issues.)
http://bugzilla.gnome.org/show_bug.cgi?id=587251
Mutter is a Clutter-based compositing manager. So, remove the code for
the XRender-based compositor, and make it mandatory to have XComposite,
XRender and Clutter.
Run-time support for non-composited operation is left for now.
* src/compositor/mutter/: Move files from this subdirectory into
the main compositor/ directory.
* compositor/compositor-xrender.ccompositor/compositor-xrender.h:
Remove
* include/compositor-clutter.h: Remove this stray file, it had been
replaced with compositor-mutter.h some time back.
http://bugzilla.gnome.org/show_bug.cgi?id=581813
Code:
All references in the code not related to themes, keybindings, or
GConf were changed from 'metacity' to 'mutter'. This includes, among other
things, strings, comments, the atoms used in the message protocol, and
the envvars used for debugging. The GConf schema file was reduced to
the 3 settings new to mutter.
The overall version was brought up to 2.27 to match current gnome.
Structure:
All files named '*metacity*' were renamed '*mutter*' with appropriate
changes in the automake system. Files removed are
doc/creating_themes, src/themes, doc/metacity-theme.dtd,
metacity.doap. These files will eventually end up in an external
gnome-wm-data module.
Installation location:
On the filesystem the mutter-plugindir was change from
$(libdir)/metacity/plugins/clutter to just $(libdir)/mutter/plugins.
The mutter-plugins.pc.in reflects these changes.
Note:
mutter.desktop.in and mutter-wm.desktop both continue to have
X-GNOME-WMSettingsModule=metacity set. This allows
gnome-control-center to continue using libmetacity.so for
configuration. This is fine since most the general keybindings and wm
settings are being read from /apps/metacity/* in gconf.
Make meta_window_get_icon_geometry() public, so that it can be used
to from plugins to animate windows minimizing to the correct
position.
Based on a patch from Cosimo Cecchi <cosimoc@gnome.org>
http://bugzilla.gnome.org/show_bug.cgi?id=571109
