There was a typo in getting the height of the full texture to check
whether the sub region fits so that it was using the width
instead. This was causing crashes when debugging is enabled for some
apps.
In cogl_texture_new_from_file we create and own a temporary
bitmap. There's no need to copy this data if we need to do a premult
conversion so instead it just does conversion before passing it on to
cogl_texture_new_from_bitmap.
The Cogl atlas code was using _cogl_texture_prepare_for_upload with a
NULL pointer for the dst_bmp to determine the internal format of the
texture without converting the bitmap. It needs to do this to decide
whether the texture will go in the atlas before wasting time on the
conversion. This use of the function is a little confusing so that
part of it has been split out into a new function called
_cogl_texture_determine_internal_format. The code to decide whether a
premult conversion is needed has also been split out.
When deciding if a material layer is equal it now compares the GL
target and texture number if the textures are not sliced. This is
needed to get batching across atlased textures.
Cogl accepts a pixel format for both the data in memory and the
internal format to be used for the texture. If they do not match then
it would convert them using the CoglBitmap functions before uploading
the data. However, GL also lets you specify both formats so it makes
more sense to let GL do the conversion. The driver may need the
texture in a specific format so it may end up being converted anyway.
The cogl_texture_upload_data functions have been removed and replaced
with a single function to prepare the bitmap. This will only do the
premultiplication conversion because that is the only part that GL
can't do directly.
The premult part of _cogl_convert_premult has now been split out as
_cogl_convert_premult_status. _cogl_convert_premult has been renamed
to _cogl_convert_format to make it less confusing. The premult
conversion is now done in-place instead of copying the
buffer. Previously it was copying the buffer once for the format
conversion and then copying it again for the premult conversion. The
premult conversion never changes the size of the buffer so it's quite
easy to do in place. We can also use the separated out function
independently.
The internal format of the atlas texture is still set to the
appropriate format so Cogl will disable blending for textures that are
intended to be RGB. This should end up ignoring the alpha channel from
the texture in the atlas. This makes the code slightly easier to
maintain and should also improve the chances of batching.
* device-manager: (37 commits)
x11: Re-enable XI1 extension keyboards
x11: Always handle core device events before XI events
docs: Documentation fixes for DeviceManager
device-manager: Fix the signals definition
docs: Add sections for InputDevice and DeviceManager
docs: Add clutter_input_device_get_device_name()
tests: Print out the device details on motion
Always register core devices
device: Remove unused is_default member
win32: Experimental implementation of device support
tests: Print the device name, as well as its Id
x11: Fill out the :name property of the InputDevices
device: Add the :name property to InputDevice
x11: Store core devices on the X11 Backend singleton
device: Unset the cursor actor when leaving the stage
device: Add pointer actor getter
x11: Discard the LeaveNotify for off-stage ButtonRelease
device: Do not overwrite the stage for an InputDevice
event: Off-stage button releases have a click count of 1
event: Scroll events do not have click count
...
Added a "selection-bound" notify on clutter_text_clear_selection as it
changes the value.
Added utility function clutter_text_set_positions, in order to
change both cursor position and selection bound inside a
g_object_[freeze/thaw]_notify block
Added g_object_[freeze/thaw]_notify in other functions that changes
both cursor position and selection bound
Solves http://bugzilla.openedhand.com/show_bug.cgi?id=1955
ClutterStage has both set_key_focus() and get_key_focus() methods, but
there is no :key-focus property. This means that it is not possible to
get notifications when the key-focus has changes except by connecting to
both the ::key-focus-in and ::key-focus-out signals and do additional
bookkeeping.
http://bugzilla.openedhand.com/show_bug.cgi?id=1956
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The TimeoutPool is not used by ClutterTimeline any more, so we need to
remove a sentence from its description. We also need to fix the gtk-doc
syntax errors.
Instead of assigning a new colour to each quad of a batch, the
rectangle debugging code now assigns a new colour to each batch so
that it can be used to visually see what is being batched. The colour
is stored in a global variable that is reset during cogl_clear. This
improves the chances that the same colour will be used for a batch in
the next frames to avoid flickering.
When setting up the state for the vertex buffer,
enable_state_for_drawing_buffer tries to keep track of the highest
numbered texture unit in use. It then disables any texture arrays for
units that were previously enabled if they are greater than that
number. However if there is no texturing in the VBO then the max used
unit would be left at 0 which it would later think meant unit 0 is
still in use so it wouldn't disable it. To fix this it now initialises
the max used unit to -1 which it should interpret as ‘no units are in
use’ so it will later disable the arrays for all units.
Thanks to Jon Mayo for reporting the bug.
http://bugzilla.openedhand.com/show_bug.cgi?id=1957
In the example for clutter_actor_animate the "x" and "y" properties
are floats so they need to be passed float values in the var args
otherwise it will crash. There was also a missing comma.
There were some other minor problems with the behaviours example which
would cause it not to compile.
We were checking the number of texture units against the GL enum that is
used in glGetInteger() to query that number. Let's abstract this in a
little function.
Took the opportunity to dig a bit on the usage of GL limits for the
number of texture (image) units and document our use of them. We'll need
something finer grained if we want to fully exploit texture image units
with a programmable pipeline.
An example of what could be the equivalent of
"RBG = REPLACE(TEXTURE)
A = MODULATE(PREVIOUS,TEXTURE)"
using the ARB_texture_env_combine extension was given, but it seems that
a few typo were left:
* remove a spurius GL_COMBINE_ALPHA
* use the _ALPHA variant of SRCN and OPERANDN when setting up the
alpha combiner
It's very useful to see the actual number the reference value is
compared too when the test fails. GTest has g_assert_cmp$type()
functions for that, so make good use of them.
A small doubt has risen about the use of CoglTextureUnit in materials:
will texture matrices still work if we have several materials, each of
them having at texture on the same texture unit? The answer is yes!
test-cogl-multitexture has been extended to use 2 materials with about
the same setup except a little difference: the texture matrices for the
lightmaps rotate in opposite directions.
While at it, changed the rotation behaviour by an implicit animation
with a small additional bonus bling.
The index field of CoglTextureUnit was never set, leading to the
creation of units with index set to 0. When trying to retrieve a texture
unit by its index (!= 0) with _cogl_get_texture_unit(), a new one was
created as it could not find it back in the list of textures units:
ctx->texture_units.
http://bugzilla.openedhand.com/show_bug.cgi?id=1958
The :opacity property is defined using a GParamSpecUchar. This usually
leads to issues with language bindings that don't have an 'unsigned
char' type and that need to explicitly handle the conversion between
G_TYPE_UCHAR and G_TYPE_INT or G_TYPE_UINT.
The property definition already specifies an interval size of [0, 255]
on the values; more importantly, GObject already implicitly transforms
between G_TYPE_UCHAR and G_TYPE_UINT (the GValue transformation
functions are registered at type system initialization time) so
switching between a GParamSpecUchar and a GParamSpecUint should not be
an ABI break.
I have tested a simple program using the opacity property before and
after the change and I cannot see any run-time warnings related to this
issue.
Be more drastic if the internal state is broken, and assert() if the
expected Alpha and Timeline instances we need are not valid. This
usually implies a library bug or a massive heap corruption.
The Animation code does transformation of values between type A and A'
after checking for compatibility using g_value_type_compatible(). This
is incorrect: compatibility means that the two types can be copied. The
correct conversion should follow:
if (compatible (type (A), type (A')))
copy (A, A');
else
if (transformable (type (A), type (A')))
transform (A, A');
else
error("Unable to trasform type A in A'");
The transformation might still fail, so we need to check for errors
there as well as a fall-through case.
We should not just check for compatibility, but also for the ability to
transform a GValue of type A into another of type A'.
Usually compatibility is enough, especially if types can be
introspected beforehand; some times, though, we also need to check for
transformability as a type can provide the transformation functions
necessary for the operation.
The commit 1c69c61745 which improved the
protection against timeline removals during the master clock advancement
was only doing half the job - and actually broke the chaining of
animations inside the ::completed signal.
We cannot simply take a reference on the timelines and still use the list
held by the master clock because the do_tick() might result in the
creation of a new timeline, which gets added at the end of the list with
no reference increase and thus gets disposed at the end of the iteration.
We also cannot steal the master clock timelines list because a timeline
might be removed as the direct result of do_tick() and remove_timeline()
would not find the timeline, failing and leaving a dangling pointer
behind.
For this reason we copy the list of timelines out of the one that the
Master Clock holds, take a reference on each timeline, advance them all,
release the reference and free the list.
The extension keyboard support in XInput 1.x is hopelessly broken.
Nevertheless, it's possible to use some bits of it, as we prefer the
core keyboard events to the XInput events, thus at least having proper
handling for X11 key events on the Stage window.
The XI 1.0 layer is complementary to the X11 core devices handling; this
means that core events will still be emitted for the core pointer and
keyboard devices, and that secondary (floating) devices should be
handled on top of that.
Thus, the XI event handling code should be executed (if explicitly
compiled in and enabled) if the core device events have not been parsed.
Note: this is going away with XI2, which completely replaces both core and
XI1 events.
Even with XInput support we should always register core devices. This
allows us to handle enter and leave events correctly on the Stage and
to have a working XInput 1.x support in Clutter.
