When a virtual stream is destroyed, its respective virtual monitor is
destroyed too. When the virtual monitor is destroyed, mutter reloads
the monitor manager.
However, at this point, the virtual stream is not completely destroyed
yet. The viewport of the virtual monitor still exists at this point and
when the monitor manager reloads, it will try to fetch the logical
monitor of the now destroyed virtual monitor, which will fail and thus
gnome-shell will run into a segfault.
Fix this situation by reloading the monitor manager in an idle callback.
When the monitor manager reloads, the virtual monitor is completely
gone, since the viewport of the virtual monitor is destroyed after the
virtual monitor itself.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2864
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3307>
It's hard to tell why turning on HDR mode failed without these log
messages. It could be missing support in the sink (EDID/DisplayID) or
missing support in the driver/display hardware (connector properties) or
just a failure turning it on.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3251>
We can change power save mode for two reasons: gsd-power told us to, or
we saw a hotplug event. Sometimes it's useful to be able to make the
distinction to why a power save mode changed, so add a reason to the
signal.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3233>
The unknown color space's only purpose is to signal that the current KMS
state has a unknown color space set. It is not one of the color spaces
that can be set. We already only try to set a color space if the default
color space is supported so we should use the default color space as a
fallback instead of the unknown color space.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2693
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2915>
We might get told to restore the old monitor configuration by the
monitor configuration prompt, in case the user pressed "revert" or
equivalent. This might be in response to a button press, and those
happen during frame clock dispatch. If we would restore an old
configuration during dispatch, it means we would reconfigure the
monitors including their stage views while dispatching, which means we'd
destroy the frame clock while it's dispatching.
Doing that causes problems, as the frame clock isn't expecting to be
destroyed mid-function. Specifically,
We'd enter
clutter_frame_clock_dispatch (clutter-frame-clock.c:811)
frame_clock_source_dispatch (clutter-frame-clock.c:839)
g_main_dispatch (gmain.c:3454)
g_main_context_dispatch (gmain.c:4172)
g_main_context_iterate.constprop.0 (gmain.c:4248)
g_main_loop_run (gmain.c:4448)
meta_context_run_main_loop (meta-context.c:482)
main (main.c:663)
which would first call
_clutter_process_event (clutter-main.c:920)
_clutter_stage_process_queued_events (clutter-stage.c:757)
handle_frame_clock_before_frame (clutter-stage-view.c:1150)
which would emit e.g. a button event all the way to a button press
handler, which would e.g. deny the new configuration:
restore_previous_config (meta-monitor-manager.c:1931)
confirm_configuration (meta-monitor-manager.c:2866)
meta_monitor_manager_confirm_configuration (meta-monitor-manager.c:2880)
meta_plugin_complete_display_change (meta-plugin.c:172)
That would then regenerate the monitor configuration and stage view
layout, which would destroy the old stage view and frame clock.
meta_stage_native_rebuild_views (meta-stage-native.c:68)
meta_backend_native_update_screen_size (meta-backend-native.c:457)
meta_backend_sync_screen_size (meta-backend.c:266)
meta_backend_monitors_changed (meta-backend.c:337)
meta_monitor_manager_notify_monitors_changed (meta-monitor-manager.c:3595)
meta_monitor_manager_rebuild (meta-monitor-manager.c:3683)
meta_monitor_manager_native_apply_monitors_config (meta-monitor-manager-native.c:343)
meta_monitor_manager_apply_monitors_config (meta-monitor-manager.c:704)
After returning back to the original clutter_frame_clock_dispatch()
frame, various state in the frame clock will be gone and we'd crash.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2901>
This adds a new 'experimental-hdr' string property to the MonitorManager
which can be changed from looking glass.
Currently when the string equals 'on', HDR (PQ, Rec2020) will be enabled
on all monitors which support it. In the future support for more
transfer functions and color spaces as well as HDR metadata can be
added.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2879>
The previous logic tried to keep the position of the top left corner of
the window relative to the top left corner of the monitor. This allowed
the window to move out of the target monitor. This change keeps the
proportions of the distance between the window and the monitor borders
instead if possible. Otherwise it keeps the relative position of the
center of the window clamped to [0,1] to make sure the window lands on
the right output.
This also slightly changes what monitor is considered to be on: the
monitor which contains the center of the window and, if the center is on
no monitor, the monitor wich overlaps the most with the window.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2591>
While already cleaning up API, if this should ever be more non-static
than a constant, it's better if its a function on the monitor manager
instance than something static.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2718>
Instead of passing 4 arguments (red, green and blue arrays as well as a
size), always pass them together in a new struct MetaGammaLut. Makes
things slightly less tedious.
The KMS layer still has its own variant, but lets leave it as that for
now, to keep the KMS layer "below" the cross backend CRTC layer.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
In practice, for KMS backend CRTC's, we cache the gamma in the monitor
manager instance, so that anyone asking gets the pending or up to date
value, instead of the potentially not up to date value if one queries
after gamma was scheduled to be updated, and before it was actually
updated.
While this is true, lets still move the API to the MetaCrtc type; the
backend specific implementation can still look up cached values from the
MetaMonitorManager, but for users, it becomes less cumbersome to not
have to go via the monitor manager.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
It's not really about monitors, even though it is used for monitors.
Lets shrink MetaMonitorManager a bit moving it to the backend.
While at it, stop leaking it too.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2141>
Same applies to MetaOutput. The reason for this is to make it possible
to more reliably know when there was EDID telling us about these
details. This will be used for colord integration.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2141>
This adds the 4 new connector types that mutter didn't know about from
drm_mode.h in the kernel.
Noticed because mutter kept crashing when plugging in a USB-C adapter to
use an external monitor.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2577>
When we change the privacy screen, we added a result listener to the KMS
update object to notify the upper layer about the privacy screen state
change. This was slightly awkward as one might have changed the state
multiple times for a single update, thus it was necessary to remove any
old result listeners to an update before adding a new one.
Doing this will not be possible when updates are fully async and managed
by the KMS impl device.
To handle this, instead make the post-commit prediction notify about
changes that happens in response to a successfully committed update. We
already predicted the new privacy screen state, so the necessary change
was to plumb the actual change into a callback which emits the signal if
there actually was a privacy screen change.
This will then be communicated via the same signal listener that already
listens to the 'resources-changed' signal.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2340>
The monitors settings such as the privacy screen property is propagated
to the monitors via kms updates, however during initialization and
on monitors changes, we end up clearing the pending KMS updates because
such settings are added to the queue before the backend has fully
initialized the monitors, and this may lead to discarding all the
pending updates, including the one we've just planned.
To avoid this, move settings applications after we've both initialized
the backend and notified it about changes.
Also avoid to try set the settings during actual initialization, but
delay that after post-init.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2372>
gnome-desktop is used to retrieve the monitor vendor name which in some
use cases is not needed as it brings a bunch of gnome-desktop unwanted
dependencies.
The change makes mutter fallback to an "Undefined" vendor name if it is
built without gnome-desktop
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2317>
It passes a MetaLogicalMonitor, which isn't introspected right now, so
skip it completely. The entry point to the UI is handled via
MetaDisplay, so it isn't needed.
This fixes the following warning:
<unknown>:: Warning: Meta: (Signal)monitor-privacy-screen-changed: argument object: Unresolved type: 'MetaLogicalMonitor'
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2287>
Adding a <dbus/> element containing a boolean (yes/no) determines
whether org.gnome.Mutter.DisplayConfig ApplyMonitorsConfig will be
callable. The state is also introspectable via the
ApplyMonitorsConfigAllowed property on the same interface.
For example
<monitors version="2">
<policy>
<dbus>no</dbus>
</policy>
</monitors>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2030>
When privacy screen is changed and this happens on explicit user request
(that is not a setting change) we should notify about this via an OSD.
To perform this, we keep track of the reason that lead to a privacy
screen change, and when we record it we try to notify the user about.
When the hardware has not an explicit hotkey signal but we record a
change we must still fallback to this case.
Fixes: #2105
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1952>
