The BinLayout should store a pointer to the Container that it is
using it as the layout manager.
This allows us to fix the API and drop the additional Container
arguments from set_alignment() and get_alignment().
This also allows us to add a ClutterBinLayout::add() method which
adds an actor and sets the alignment policies without dealing with
variadic arguments functions and GValue (de)marshalling.
Use the LayoutManager API to set a back pointer to the Box actor
inside the LayoutManager used by the box.
This also allows us to replace the LayoutManager on a Box, since
the LayoutManager will be able to replace all the metadata if
needed.
The LayoutManager implementation might opt to take a back pointer
to the Container that is using the layout instance; this allows
direct access to the container itself from within the implementation.
The ClutterBox::add method is a simple wrapper around the Container
add_actor() method and the LayoutManager layout properties API. It
allows adding an actor to a Box and setting the layout properties in
one call.
If the LayoutManager used by the Box does not support layout properties
then the add() method short-circuits out.
Along with the varargs version of the method there's also a vector-based
variant, for language bindings to use.
Instead of overloading ClutterChildMeta with both container and layout
metadata and delegate to every LayoutManager implementation to keep a
backpointer to the layout manager instance, we can simply subclass
ChildMeta into LayoutMeta and presto! everything works out pretty well
for everyone.
The chapter on how to subclass ClutterActor inside the API reference for
Clutter is still using ClutterUnit and referencing to concepts that have
been changed since the document was written.
ClutterBehaviourPath has been changed and ClutterBehaviourBspline has
been removed; now we use ClutterPath everywhere we need to describe a
path. This warrants a chapter in the migration guide.
The get_type() function for ClutterInterval is missing from the
known GObject types, so gtk-doc doesn't know that it has to
introspect it for hierarchy, properties and signals.
Currently, to update a property inside an animation you have to
get the interval for that property and then call the set_final_value()
method.
We can provide a simpler, bind()-like method for the convenience of
the developers that just validates everything and then calls the
Interval.set_final_value().
The version number in the title made sense when we were breaking
API with every minor release. Now that we're API stable we can
drop that and make the output in Devhelp and on the website slightly
more good looking.
We should follow the convention for boxed types initializers of:
<type_name>_from_<another_type> (boxed, value)
For ClutterUnits as well; so:
clutter_units_pixels -> clutter_units_from_pixels
clutter_units_em -> clutter_units_from_em
...
We should still keep the short-hand version as a macro, though.
It might be desirable for some applications and/or platforms to get
every motion event that was delivered to Clutter from the windowing
backend. By adding a per-stage flag we can bypass the throttling
done when processing the events.
http://bugzilla.openedhand.com/show_bug.cgi?id=1665
It would be useful inside a custom actor's paint function to be able to
tell if this is a primary paint call, or if we are in fact painting on
behalf of a clone.
In Mutter we have an optimization not to paint occluded windows; this is
desirable for the windows per se, to conserve bandwith to the card, but
if something like an application switcher is using clones of these windows,
they will not get painted either; currently we have no way of
differentiating between the two.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1685
Currently, the transformation matrix for an actor is constructed
from scenegraph-related accessors. An actor, though, can call COGL
API to add new transformations inside the paint() implementation,
for instance:
static void
my_foo_paint (ClutterActor *a)
{
...
cogl_translate (-scroll_x, -scroll_y, 0);
...
}
Unfortunately these transformations will be completely ignored by
the scenegraph machinery; for instance, getting the actor-relative
coordinates from event coordinates is going to break badly because
of this.
In order to make the scenegraph aware of the potential of additional
transformations, we need a ::apply_transform() virtual function. This
vfunc will pass a CoglMatrix which can be used to apply additional
operations:
static void
my_foo_apply_transform (ClutterActor *a, CoglMatrix *m)
{
CLUTTER_ACTOR_CLASS (my_foo_parent_class)->apply_transform (a, m);
...
cogl_matrix_translate (m, -scroll_x, -scroll_y, 0);
...
}
The ::paint() implementation will be called with the actor already
using the newly applied transformation matrix, as expected:
static void
my_foo_paint (ClutterActor *a)
{
...
}
The ::apply_transform() implementations *must* chain up, so that the
various transformations of each class are preserved. The default
implementation inside ClutterActor applies all the transformations
defined by the scenegraph-related accessors.
Actors performing transformations inside the paint() function will
continue to work as previously.
Although we wouldn't recommend developers try and interleve OpenGL drawing
with Cogl drawing - we would prefer patches that improve Cogl to avoid this
if possible - we are providing a simple mechanism that will at least give
developers a fighting chance if they find it necissary.
Note: we aren't helping developers change OpenGL state to modify the
behaviour of Cogl drawing functions - it's unlikley that can ever be
reliably supported - but if they are trying to do something like:
- setup some OpenGL state.
- draw using OpenGL (e.g. glDrawArrays() )
- reset modified OpenGL state.
- continue using Cogl to draw
They should surround their blocks of raw OpenGL with cogl_begin_gl() and
cogl_end_gl():
cogl_begin_gl ();
- setup some OpenGL state.
- draw using OpenGL (e.g. glDrawArrays() )
- reset modified OpenGL state.
cogl_end_gl ();
- continue using Cogl to draw
Again; we aren't supporting code like this:
- setup some OpenGL state.
- use Cogl to draw
- reset modified OpenGL state.
When the internals of Cogl evolves, this is very liable to break.
cogl_begin_gl() will flush all internally batched Cogl primitives, and emit
all internal Cogl state to OpenGL as if it were going to draw something
itself.
The result is that the OpenGL modelview matrix will be setup; the state
corresponding to the current source material will be setup and other world
state such as backface culling, depth and fogging enabledness will be also
be sent to OpenGL.
Note: no special material state is flushed, so if developers want Cogl to setup
a simplified material state it is the their responsibility to set a simple
source material before calling cogl_begin_gl. E.g. by calling
cogl_set_source_color4ub().
Note: It is the developers responsibility to restore any OpenGL state that they
modify to how it was after calling cogl_begin_gl() if they don't do this then
the result of further Cogl calls is undefined.
This function should only need to be called in exceptional circumstances
since Cogl can normally determine internally when a flush is necessary.
As an optimization Cogl drawing functions may batch up primitives
internally, so if you are trying to use raw GL outside of Cogl you stand a
better chance of being successful if you ask Cogl to flush any batched
geometry before making your state changes.
cogl_flush() ensures that the underlying driver is issued all the commands
necessary to draw the batched primitives. It provides no guarantees about
when the driver will complete the rendering.
This provides no guarantees about the GL state upon returning and to avoid
confusing Cogl you should aim to restore any changes you make before
resuming use of Cogl.
If you are making state changes with the intention of affecting Cogl drawing
primitives you are 100% on your own since you stand a good chance of
conflicting with Cogl internals. For example clutter-gst which currently
uses direct GL calls to bind ARBfp programs will very likely break when Cogl
starts to use ARBfb programs internally for the material API, but for now it
can use cogl_flush() to at least ensure that the ARBfp program isn't applied
to additional primitives.
This does not provide a robust generalized solution supporting safe use of
raw GL, its use is very much discouraged.
To allow for flushing of batched geometry within Cogl we can't support users
directly calling glReadPixels. glReadPixels is also awkward, not least
because it returns upside down image data.
All the unit tests have been swithed over and clutter_stage_read_pixels now
sits on top of this too.
The clutter_actor_pick() function just emits the ::pick signal
on the actor. Nobody should be using it, since the paint() method
is already context sensitive and will result in a ::pick emission
by itself. The clutter_actor_pick() is just confusing things.
The Clutter API reference should have a section on how to port
applications from older version of Clutter to the new API.
The first guide deals on how to port animations created with
ClutterEffect to clutter_actor_animate().
ActorBox should have methods for easily extracting the X and Y
coordinates of the origin, and the width and height separately.
These methods will make it easier for high-level language bindings
to manipulate ActorBox instances and avoid the Geometry type.
The Vertex and ActorBox boxed types are meant to be used across
the API, but are fairly difficult to bind. Their memory management
is also unclear, and has to go through the indirection of
g_boxed_copy() and g_boxed_free().
Merge branch 'master-clock-updates'
* master-clock-updates: (22 commits)
Change the paint forcing on the Text cache text
[timelines] Improve marker hit check and don't fudge the delta
Revert "[timeline] Don't clamp the elapsed time when a looping tl reaches the end"
[tests] Don't add a newline to the end of g_test_message calls
[test-timeline] Add a marker at the beginning of the timeline
[timeline] Don't clamp the elapsed time when a looping tl reaches the end
[master-clock] Throttle if no redraw was performed
[docs] Update Clutter's API reference
Force a paint instead of calling clutter_redraw()
Fix clutter_redraw() to match the redraw cycle
Run the repaint functions inside the redraw cycle
Remove useless manual timeline ticking
Move elapsed-time calculations into ClutterTimeline
Limit the frame rate when not syncing to VBLANK
Decrease the main-loop priority of the frame cycle
Avoid motion-compression in test-picking test
Compress events as part of the frame cycle
Remove stage update idle and do updates from the master clock
Call g_main_context_wakeup() when we start running timelines
Remove unused msecs_delta member
...
The clutter_redraw() function is used by embedding toolkits to
force a redraw on a stage. Since everything is performed by
toggling a flag inside the Stage itself and then letting the
master clock advance, we need a ClutterStage method to ensure
that we start the master clock and redraw.
