Commit Graph

758 Commits

Author SHA1 Message Date
Emmanuele Bassi
ce3311df26 conform: Remove unnecessary destroy() calls
Unparented actors are owned by the Script instance, and if that goes
away then the actors go away with it. The fact that we needed an
explicit destroy() before was a hint of a memory management issue that I
blissfully - and regretfully - ignored for the sake of a passing test
suite.
2010-10-19 12:32:02 +01:00
Emmanuele Bassi
b5bbdd6cec build: Add test wrappers to the main ignore file
They are generated at configure time, so it's a good idea to have them
in the main ignore file instead of adding them to the built ignore files
under tests.
2010-10-19 11:03:13 +01:00
Emmanuele Bassi
0f613ea134 cairo-texture: Allow overriding the surface creation
By using a new signal, ::create-surface (width, height), it should be
possible for third party code and sub-classes to override the default
surface creation code in CairoSurface.

This commit takes a bit of the patch from:

  http://bugzilla.clutter-project.org/show_bug.cgi?id=1878

which cleans up CairoTexture; the idea, mutuated from that bug, is that
the CairoTexture actor checks whether the surface it has it's an image
one, and in that case it uses a Cogl texture as the backing store. In
case the surface is not an image one we assume that the surface itself
has some way of updating the GL state and flush the surface.
2010-10-18 11:26:45 +01:00
Emmanuele Bassi
d032b9b2bf conform: Start cleaning up the conformance test suite
Re-order the units into a sensible list, with basic tests at the
beginning, and per-class tests at the end - with Cogl last.

Also, start renaming the unit functions from test_<foo> to <foo>,
so that the executable wrappers and the reports have sensible names.
2010-10-12 17:42:18 +01:00
Emmanuele Bassi
b5d5b9628e conform: Implement TEST_CONFORM_TODO() correctly
The TODO() macro for adding new tests to the test suite has always meant
to be implemented like the TODO block in Test::More, i.e. a test that is
assumed to fail, and which warns if it unexpectedly succeeds.

Since GTest lacks the expressivity of Test::More, the implementation
just verifies that the tests marked as TODO actually fail, and will fail
if they happen to succeed - at which point the developer will have to
change the macro to SIMPLE or SKIP.
2010-10-12 17:11:52 +01:00
Emmanuele Bassi
2a23bab819 conform: Save the revision and date inside the test report
Even if gtester-report doesn't use that information (yet), we should
store the revision of Clutter that generated the report, and the date in
which the test suite was ran.
2010-10-12 15:44:57 +01:00
Neil Roberts
7fd6273c25 tests: Generate the stub scripts using sed
Instead of trying to run ./test-conformance with the -l option to
generate a list of available tests it now runs sed on the
test-conform-main.c file instead. Running the generated executable is
a pain for cross-compiling so it would be nice to avoid it unless it's
absolutely necessary. Although you could tell people who are cross
compiling to just disable the conformance tests, this seems a shame
because they could still be useful along with the wrappers for example
if the cross compile is built to a shared network folder where the
tests can be run on the actual device.

The sed script is a little more ugly than it could be because it tries
to avoid using the GNU extensions '\+' and '\|'.

The script ends up placing restrictions on the format of the C file
because the tests must all be listed on one line each. There is now a
comment to explain this. Hopefully the trade off is worth it.

http://bugzilla.clutter-project.org/show_bug.cgi?id=2363
2010-10-12 15:24:32 +01:00
Neil Roberts
100d541f47 tests: Re-enable the test-anchors conformance test
This test was disabled in b5d58213. The commit message doesn't mention
this so I'm guessing it was a mistake. In any case the test appears to
work now anyway so it should be re-enabled.

http://bugzilla.clutter-project.org/show_bug.cgi?id=2363
2010-10-12 15:24:32 +01:00
Emmanuele Bassi
2831addcf5 test-flow-layout: Track stage size by default
Instead of requiring a special command line switch.
2010-10-12 14:53:20 +01:00
Robert Bragg
471659ed4b test-pixmap: add timeout to draw arcs on pixmap
As a convenient test that clipped redraws are working correctly in
response to X pixmap damage this updates test-pixmap to have a repeating
1 second timeout that draws arcs on the pixmap.
2010-09-30 11:44:12 +01:00
Neil Roberts
d0cab85673 Add a conformance test for clutter_actor_contains
This adds a conformance test for clutter_actor_contains to assert that
it gets the expected results for the given tree of actors.
2010-09-28 15:21:49 +01:00
Emmanuele Bassi
8fe9f3a37d test-clutter-units: Force a known resolution to avoid fuzzyness
Instead of taking the current resolution, whatever it may be, use a
known DPI. This should alleviate fuzzyness and create consistent
results.
2010-09-24 16:21:06 +01:00
Emmanuele Bassi
4c8867ea07 table-layout: Invert row/column in arguments
*** This is an API change ***

The general pattern for axis-aligned arguments is:

        x argument
        y argument

If we consider columns an x-aligned argument, and row a y-aligned
argument, then we need to update the TableLayout functions to be:

        column
        row

and not:

        row
        column
2010-09-23 15:17:58 +01:00
Neil Roberts
bcd4385a0e test-conform: Delay initializing Clutter until a test is run
Instead of calling clutter_init immediately, test-conformance now only
calls it as part of test_conform_simple_fixture_setup. The conformance
tests assert that only one test is run per instance of
test-conformance so it should never end up calling clutter_init
twice. Delaying clutter_init has the advantage that calling
"test-conformance -l" will still work even on systems with no X
server. This could be useful for automated build systems.
2010-09-21 14:10:19 +01:00
Emmanuele Bassi
bdcac5617b test-bind: Fix colors and set the name of the boxes 2010-09-17 12:17:50 +01:00
Emmanuele Bassi
8ca47e3b20 build: Use the power of abs_builddir
When calling test-conformance to get the list of conformance tests.
2010-09-17 12:17:50 +01:00
Emmanuele Bassi
40af71fad7 build: List the units inside a file
This avoids trying to run test-conformance -l multiple times.
2010-09-13 02:10:35 +01:00
Emmanuele Bassi
4ee05f8e21 keysyms: Update the macros to CLUTTER_KEY_*
The keysyms defines in clutter-keysyms.h are generated from the X11 key
symbols headers by doing the equivalent of a pass of sed from XK_* to
CLUTTER_*. This might lead to namespace collisions, down the road.
Instead, we should use the CLUTTER_KEY_* namespace.

This commit includes the script, taken from GDK, that parses the X11
key symbols and generates two headers:

  - clutter-keysyms.h: the default included header, with CLUTTER_KEY_*
  - clutter-keysyms-compat.h: the compatibility header, with CLUTTER_*

The compat.h header file is included if CLUTTER_DISABLE_DEPRECATED is
not defined - essentially deprecating all the old key symbols.

This does not change any ABI and, assuming that an application or
library is not compiling with CLUTTER_DISABLE_DEPRECATED, the source
compatibility is still guaranteed.
2010-09-10 17:54:52 +01:00
Emmanuele Bassi
32ea9702e6 build: Add XML files to the ignore blacklist 2010-09-08 17:50:38 +01:00
Henrik Hedberg
1eae9fcd7e drag-action: Added x-drag-threshold and y-drag-threshold properties
*** This is an API change ***

Replaced the original drag-threshold property with two separate
horizontal (x-drag-threshold) and vertical (y-drag-threshold)
thresholds.

It is some times necessary to have different drag thresholds for the
horizontal and vertical axes. For example, when a draggable actor is
inside a horizontal scrolling area, only vertical movement must begin
dragging. That can be achieved by setting the x-drag-threshold to
G_MAXUINT while y-drag-threshold is something usual, say, 20 pixels.

This is different than drag axis, because after the threshold
has been cleared by the pointer, the draggable actor can be dragged
along both axes (if allowed by the drag-axis property).

http://bugzilla.clutter-project.org/show_bug.cgi?id=2291

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-09-07 10:40:49 +01:00
Emmanuele Bassi
7e56a98413 texture: Use a base material for all instances
Creating new materials for every Texture instance results in a lot of
ARBfp programs being generated/compiled. Since most textures will just
be similar we should create a template material for all of them, and
then copy it in every instance. Cogl will try to optimize the generation
of the program and, hopefully, will reuse the same program most of the
time.

With this change, a simple test shows that loading 48 textures will
result in just two programs being compiled - with and without batching
enabled.

http://bugzilla.clutter-project.org/show_bug.cgi?id=2295
2010-09-06 18:09:19 +01:00
Emmanuele Bassi
abef73bb58 Replace cogl_color_set_from_* with cogl_color_init_from_*
The former is not yet "officially" deprecated by the latter, but it's
confusing to have them both in the code base.
2010-09-03 16:58:47 +01:00
Emmanuele Bassi
88b026fa72 test-actors: Name all the actors
Makes it easier to debug events.
2010-08-26 17:31:32 +01:00
Bastian Winkler
870e7ddfad test-script-parser: Add a second child to the container
The script parser won't apply child and layout properties correctly with
more than one children.

http://bugzilla.clutter-project.org/show_bug.cgi?id=2285

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-08-25 16:18:25 +01:00
Emmanuele Bassi
fd6d6a93f1 build: Fix distcheck errors 2010-08-16 13:23:10 +01:00
Emmanuele Bassi
3142b15a9f build: Use maintainer-clean for the ignore files removal
Instead of distclean.
2010-08-15 18:42:54 +01:00
Emmanuele Bassi
c4913bfce9 Revert "build: Distclean generated ignore files"
Git ignore files are not dist'ed, so it's pointless to remove them on
distclean.

This reverts commit f14587aadc.
2010-08-15 18:33:10 +01:00
Emmanuele Bassi
94c8635d0f build: Autogenerate more ignore files
The tests/accessibility, tests/micro-bench and the examples directory
in the coobook create a lot of non-installed binaries. Since we know who
they are, and we ignore them, we can auto-generate the ignore files as
well.

The rest of Clutter is covered by the main ignore file.
2010-08-14 08:43:16 +01:00
Emmanuele Bassi
f14587aadc build: Distclean generated ignore files 2010-08-13 18:35:35 +01:00
Emmanuele Bassi
a3bc2ebfa7 build: Make test-conform depend on Makefile changes 2010-08-13 18:32:10 +01:00
Emmanuele Bassi
1e0a83b881 build: Autogenerate interactive/.gitignore
Exactly like we did for conform/.gitignore
2010-08-13 18:31:44 +01:00
Emmanuele Bassi
7c412464c2 build: Generate the conformance/.gitignore file
Since we are generating a lot of files that we should ignore, we should
generate the Git ignore file as well.
2010-08-13 18:25:22 +01:00
Emmanuele Bassi
e888da2180 build: Split up the test-conformance SOURCES
Having different sections should make it easier to add new test units to
the build.
2010-08-13 18:15:01 +01:00
Emmanuele Bassi
a25cf14e97 Revert "clutter.modules: Remove deps on gir-repository"
This reverts commit 0ce9cf730b.

The commit contained unrelated changes
2010-08-13 18:12:43 +01:00
Emmanuele Bassi
0ce9cf730b clutter.modules: Remove deps on gir-repository
Keep it in the moduleset, but don't let Clutter depend on it.
2010-08-13 18:09:28 +01:00
Emmanuele Bassi
50c5ecfe87 state: Plug some memory leakage
Thanks to Valgrind, test-state-base now reports 0 bytes definitely lost.
2010-08-13 12:12:59 +01:00
Robert Bragg
a26119b551 tests: Remove use of cogl_program_use
The removes the use of cogl_program_use which has been deprecated and
instead of using the cogl_program_uniform functions we now use the
cogl_program_set_uniform methods.
2010-08-12 16:50:46 +01:00
Neil Roberts
c129c563f5 Remove test-random-text from the interactive .gitignore 2010-08-12 14:37:38 +01:00
Emmanuele Bassi
1a8df6788b Update the micro-bench Git ignore file 2010-08-12 13:48:35 +01:00
Neil Roberts
1e45428483 test-random-text: Convert to a micro-benchmark
test-random-text is moved to the micro-bench directory. It now prints
out the time taken to draw every 10 frames.
2010-08-12 11:54:42 +01:00
Neil Roberts
65f449bdb0 test-text-perf: Add a wider range of characters
Instead of just using the latin alphabet, this adds digits and some
other alphabets to increase the range of glyphs used.
2010-08-12 11:54:41 +01:00
Neil Roberts
c26d2c5ef9 test-text-perf: Scale the text if the settings will not fit
If the font size or the number of characters causes the label not to
fit on the stage, instead of aborting it will now scale the labels so
that it fits within one of the dimensions. This makes it easier to
test with large glyph sizes.
2010-08-12 11:54:41 +01:00
Emmanuele Bassi
304e7dd077 test-drag: Fix the page curl angle 2010-08-11 14:21:22 +01:00
José Dapena Paz
d14e294d86 Add ClutterTableLayout, a layout showing children in rows and columns
A TableLayout is a layout manager that allocates its children in rows
and columns. Each child is assigned to a cell (or more if a cell span
is set).

The supported child properties are:

  • x-expand and y-expand: if this cell with try to allocate the
    available extra space for the table.
  • x-fill and y-fill: if the child will get all the space available in
    the cell.
  • x-align and y-align: if the child does not fill the cell, then
    where the child will be aligned inside the cell.
  • row-span and col-span: number of cells the child will allocate for
    itself.

Also, the TableLayout has row-spacing and col-spacing for specifying
the space in pixels between rows and between columns.

We also include a simple test of the layout manager, and the
documentation updates.

The TableLayout was implemented starting from MxTable and
ClutterBoxLayout.

http://bugzilla.clutter-project.org/show_bug.cgi?id=2038

Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
2010-08-10 23:20:06 +01:00
Emmanuele Bassi
02b7bf3635 test-flow-layout: Use BindConstraints
If we want to fit the FlowLayout to the Stage size we should use the
BindConstraint API instead of a watcher on ::allocation-changed.
2010-08-10 18:47:45 +01:00
Damien Lespiau
985a4db947 gitignore: Ignore test-cogl-shader-{arbfp,glsl}
Fear the out of tree builds!
2010-08-09 17:27:09 +01:00
Robert Bragg
a4339842f9 tests-interactive: Adds a test-cogl-shader-glsl.c
This is based on test-shader.c but is solely implemented with the
cogl_program/shader APIs instead of the clutter shader APIs.
2010-08-09 17:27:02 +01:00
Robert Bragg
f6a1f56031 tests/interactive: Adds a test-cogl-shader-arbfp.c
This tests the ARBfp support for cogl_program and cogl_shader using the
shaders Chris Lord adapted from test-shader when he was experimenting
with adding ARBfp support to clutter back in 2008 (See:
http://bugzilla.clutter-project.org/show_bug.cgi?id=1049)
2010-08-09 17:27:02 +01:00
Emmanuele Bassi
e7381c47fd bin-layout: Add a text to the test
We have a rectangle, a cairo texture and a texture. Let's go add a text
actor as well.
2010-08-05 17:22:50 +01:00
Roman Kudiyarov
5218da748f test: fixed uninitialized variable in test-cogl-point-sprites 2010-08-04 15:13:11 +01:00