We have the drm/InfoFrame encoding and our MetaOutputHdrMetadata
encoding. Check that we can correctly convert between each other by
doing a encode/decode and decode/encode roundtrip and then checking for
equality.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2879>
The HDR Static Metadata InfoFrame contents are described in CTA-861.3
and the kernel maintains a representation of that in `struct
hdr_metadata_infoframe` in `include/uapi/drm/drm_mode.h`.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2879>
The Colorspace property informs the display about the colorimetry of the
content. Only variants supported by the sink are exposed in the
property. The strings representing the color spaces are undocumented but
can be found in the `hdmi_colorspaces` list in
`drivers/gpu/drm/drm_connector.c` in the Linux kernel (v 6.2).
The HDR_OUTPUT_METADATA property is a blob with the InfoFrame content.
We have to query support for the different values in the struct from the
EDID/DisplayID ourselfs.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2879>
On hotplug, the events we receive from the kernel are async, and
connectors in the kernel come and go as they please. In practice, this
means that calling drmModeGetConnector() twice more or less directly
after each other, there is no guarantee that the latter call will return
anything if the former did.
When updating the connector in response to hotplugs, we'd first update
the list of existing connectors, and following that, query each and
every one again for their current state, to update our internal
representation; only the former handled drmModeGetConnector() returning
NULL, meaning if unlucky, we'd end up doing a null pointer dereference
when trying to update the state.
Handle this by querying the kernel for the current connector state only
once per connector, updating the list of connectors and their
corresponding state at the same time.
Fixes the following crash:
#0 meta_kms_connector_read_state at ../src/backends/native/meta-kms-connector.c:684
#1 meta_kms_connector_update_state at ../src/backends/native/meta-kms-connector.c:767
#2 meta_kms_impl_device_update_states at ../src/backends/native/meta-kms-impl-device.c:916
#3 meta_kms_device_update_states_in_impl at ../src/backends/native/meta-kms-device.c:267
#4 meta_kms_update_states_in_impl at ../src/backends/native/meta-kms.c:604
#5 update_states_in_impl at ../src/backends/native/meta-kms.c:620
#6 meta_kms_run_impl_task_sync at ../src/backends/native/meta-kms.c:435
#7 meta_kms_update_states_sync at ../src/backends/native/meta-kms.c:641
#8 handle_hotplug_event at ../src/backends/native/meta-kms.c:651
#9 on_udev_hotplug at ../src/backends/native/meta-kms.c:668
Related: https://bugzilla.redhat.com/show_bug.cgi?id=2131269
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2709>
When we change the privacy screen, we added a result listener to the KMS
update object to notify the upper layer about the privacy screen state
change. This was slightly awkward as one might have changed the state
multiple times for a single update, thus it was necessary to remove any
old result listeners to an update before adding a new one.
Doing this will not be possible when updates are fully async and managed
by the KMS impl device.
To handle this, instead make the post-commit prediction notify about
changes that happens in response to a successfully committed update. We
already predicted the new privacy screen state, so the necessary change
was to plumb the actual change into a callback which emits the signal if
there actually was a privacy screen change.
This will then be communicated via the same signal listener that already
listens to the 'resources-changed' signal.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2340>
The name had a bit conceptual conflicts with MetaKmsUpdate, as it shared
its namespace but had no relation to it. Fix this by renaming it
MetaKmsResourceChanges (and the corresponding META_KMS_UPDATE_CHANGE_*
to META_KMS_RESOURCE_CHANGE_*). The term "resource" is used since that's
already used in the signal, and the fact that the changes partly comes
from changes in the DRM resource as retrieved by drmModeGetResources.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2340>
The ImplDeviceAtomic converts the MetaKmsPlaneRotation back to the
concrete KMS value. The MetaMonitorTransform is always directly
converted to a MetaKmsPlaneRotation.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2379>
Updating the PropTable has the side effect that the parse callback now
also gets called on hotplug but it is used to initialize data. The parse
callbacks are moved to the read_state functions which are aware if this
is an initializing call or just an update.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2379>
The way device backends implement power saving differ, and power saving
needs to contain nothing incompatible in the same update. Make it
impossible to e.g. mode set, page flip, etc while entering power save by
not using MetaKmsUpdate's at all for this.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2159>
Privacy screen events on connector are handled as notification events
that won't cause any monitors reconfiguration but will emit monitors
changed on DBus, so that the new value can be fetched.
We monitor the hardware state so that we can also handle the case of
devices with hw-switchers only.
In case a software state is available it means we can also support
changing the state, and if so expose the state as unlocked.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1952>
When a docking station is disconnected, a few previously existing DRM
connectors may now be gone. When this happens, getting them via the
libdrm API results in NULL pointers returning, and we need to handle
this gracefully by making sure the connector state is properly updated.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2097>
Since we cache already all the KMS parameters we care about let's check at
each device update if anything has really changed and only in such case
emit a resources-changed signal.
In this way we can also filter out the DRM parameters that when changed
don't require a full monitors rebuild.
Examples are the gamma settings or the privacy screen parameters, that
emits an udev "hotplug" event when changed, but we want to register those
only when we handle the changed property.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1964>
In order to make it possible to e.g. unload an unused DRM device, we
need to make sure that we don't keep the file descriptor open if we
don't need it; otherwise we block anyone from unloading the
corresponding module.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1828>
The connector state wasn't properly predicted, as it earlied out if
the connector wasn't part of a mode set connector list.
Instead use the old CRTC to check whether it was used in any mode set,
and whether the connector was part of any new mode set, to predict
whether the connector is inactive or active.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1821>
Instead of telling MetaKmsConnector fill a MetaKmsUpdate with connector
property changes, make the update itself aware of the changes, making
the impl side translate that to property changes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Values may need to be processed and parsed in custom ways; make this
possible via the property table infrastructure using a callback.
Will be used for e.g. parsing rotation and formats.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Instead of relatively verbosely going through the DRM properties finding
the properties we care about and saving their ID's, add a more
declarative way to fetch property metadata. This'll allow for fetching
more property IDs with relatively less code, which will be useful for
the atomic backend.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
This contains a copy of a drmModeModeInfo, describing a mode. It also
has an unused pointer to the impl device it is associated with. It'll
later be used to get a blob ID for the mode.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Detect displays marked as 'non-desktop' by the kernel and skip them when
creating the outputs. Mutter is not able to render images that are shown
properly on those devices anyway.
This avoids lighting up attached VR HMDs and showing the GDM login
screen between the eyes in a VR HMD instead of on the monitor.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1393
We can't just update the state of the connector and CRTC from KMS since
it might contain too new updates, e.g. from a from a future hot plug. In
order to not add ad-hoc hot plug detection everywhere, predict the state
changes by looking inside the MetaKmsUpdate object, and let the hot-plug
state changes happen after the actual hot-plug event.
This fixes issues where connectors were discovered as disconnected while
doing a mode-set, meaning assumptions about the connectedness of
monitors elsewhere were broken until the hot plug event was processed.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/782https://gitlab.gnome.org/GNOME/mutter/merge_requests/826
drmModeGetConnector may fail and return NULL, this may happen when
a connector is removed underneath us (which can happen with e.g.
DP MST or GPU hot unplug).
Deal with this by skipping the connector when enumerating and by
assuming it is disconnected when checking its connection state.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/713
This commit introduces, and makes use of, a transactional API used for
setting up KMS state, later to be applied, potentially atomically. From
an API point of view, so is always the case, but in the current
implementation, it still uses legacy drmMode* API to apply the state
non-atomically.
The API consists of various buliding blocks:
* MetaKmsUpdate - a set of configuration changes, the higher level
handle for handing over configuration to the impl backend. It's used to
set mode, assign framebuffers to planes, queue page flips and set
connector properties.
* MetaKmsPlaneAssignment - the assignment of a framebuffer to a plane.
Currently used to map a framebuffer to the primary plane of a CRTC. In
the legacy KMS implementation, the plane assignment is used to derive
the framebuffer used for mode setting and page flipping.
This also means various high level changes:
State, excluding configuring the cursor plane and creating/destroying
DRM framebuffer handles, are applied in the end of a clutter frame, in
one go. From an API point of view, this is done atomically, but as
mentioned, only the non-atomic implementation exists so far.
From MetaRendererNative's point of view, a page flip now initially
always succeeds; the handling of EBUSY errors are done asynchronously in
the MetaKmsImpl backend (still by retrying at refresh rate, but
postponing flip callbacks instead of manipulating the frame clock).
Handling of falling back to mode setting instead of page flipping is
notified after the fact by a more precise page flip feedback API.
EGLStream based page flipping relies on the impl backend not being
atomic, as the page flipping is done in the EGLStream backend (e.g.
nvidia driver). It uses a 'custom' page flip queueing method, keeping
the EGLStream logic inside meta-renderer-native.c.
Page flip handling is moved to meta-kms-impl-device.c from
meta-gpu-kms.c. It goes via an extra idle callback before reaching
meta-renderer-native.c to make sure callbacks are invoked outside of the
impl context.
While dummy power save page flipping is kept in meta-renderer-native.c, the
EBUSY handling is moved to meta-kms-impl-simple.c. Instead of freezing the
frame clock, actual page flip callbacks are postponed until all EBUSY retries
have either succeeded or failed due to some other error than EBUSY. This
effectively inhibits new frames to be drawn, meaning we won't stall waiting on
the file descriptor for pending page flips.
https://gitlab.gnome.org/GNOME/mutter/issues/548https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
As with CRTC state, variable connector state is now fetched via the
MetaKmsConnector. The existance of a connector state is equivalent of
the connector being connected. MetaOutputKms is changed to fetch
variable connector state via MetaKmsConnector intsead of KMS directly.
The drmModeConnector is still used for constructing the MetaOutputKms to
find properties used for applying configuration.
https://gitlab.gnome.org/GNOME/mutter/issues/548https://gitlab.gnome.org/GNOME/mutter/merge_requests/525
Represents drmModeConnector; both connected and disconnected. Currently
only provides non-changing meta data. MetaOutputKms is changed to use
MetaKmsConnector to get basic metadata, but variable metadata, those
changing depending on what is connected (e.g. physical dimension, EDID,
etc), are still manually retrieved by MetaOutputKms.
https://gitlab.gnome.org/GNOME/mutter/issues/548https://gitlab.gnome.org/GNOME/mutter/merge_requests/525