Listen to changes in MetaA11yManager configured modifiers, and propagate
these along to the MetaSeatNative. This lets the backend keep track of
configuration changes in a11y modifiers.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4217>
The ::a11y-modifiers-change method allows tracking for changes in the
configured modifiers, add this method to allow backends to get the
modifiers so that they can be passed along the lower layers.
Carlos Garnacho: Turn into a method instead of a signal argument, turn
into an array+length instead of a hashtable.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4217>
Implement the org.freedesktop.a11y.KeyboardMonitor interface,
allowing screen readers to interact with Mutter and grab
shortcuts or full keyboard interaction.
Carlos Garnacho: Move setup to ::constructed.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4217>
This a11y manager will handle key event emission to screen
readers and other ATs. This initial commit only introduces
the object.
Carlos Garnacho: Make the object take a ::backend property
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4217>
These modifiers will be set by the backend from the main thread, and
need to be handled specially for them to be usable as both modifier
buttons, and their own regular action.
Carlos Garnacho: pass modifiers as array+lenght instead of hashtable.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4217>
The state handling about whether the a11y modifier is a first press (so
could be consumed for other actions), or results in the modifier action
(e.g. caps lock) is performed in the input thread. This information will
be propagated through the CLUTTER_EVENT_FLAG_A11Y_MODIFIER_FIRST_CLICK
flag in the related key events.
Carlos Garnacho: Drop synchronous wait for configuration changes
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4217>
libinput 1.27 added a new "sticky" mode to the tap-and-drag drag lock -
the previous mode is now called the "timeout" mode.
In sticky mode the drag lock is explicitly terminated with an extra tap,
i.e. a full sequence is:
tap, down, [:move, up, wait, down:], up, tap
where the middle part can repeat and/or wait as long as required.
In the previous "timeout" mode the drag lock would automatically release
after a timeout - for users with low dexterity this timeout may be too
short.
The sticky mode is also how macos does drag lock.
Related: https://gitlab.gnome.org/GNOME/gnome-control-center/-/merge_requests/2798
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4292>
By default, copy mode primary tries to use the GPU to perform the copy
and, in case of error, it fallbacks to CPU.
Add a flag (unused for the moment) to allow to use the CPU to perform
the copy.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4251>
More precisely, wait until no further udev hotplug events have arrived
in 2 seconds.
Keep a list of unique UpdateStatesData structs which have received
hotplug events, and call handle_hotplug_event for all of them once the
timeout expires.
This avoids problems due to some monitors generating hotplug events
when power saving is enabled on locking the session, and then
temporarily appearing disconnected.
v2:
* Make meta_test_disconnect_connect wait and run main context dispatch
before checking the number of logical monitors.
v3:
* Call g_source_unref immediately after g_source_attach, simplifies
source cleanup. (Sebastian Wick)
* Free hotplug devices list in meta_kms_finalize. (Sebastian Wick)
* Add KMS debug logging in on_udev_hotplug & hotplug_timeout.
* Bump timeout to 2 seconds. With my affected monitor, the second udev
hotplug event normally arrives almost a second after the first one,
occasionally more than 1.5 seconds though.
* Use UpdateStatesData with custom compare function for hotplug_devices
list data, since the GUdevDevice / device path string pointer values
are always different.
* Don't wait for timeout if meta_is_udev_test_device returns TRUE, to
hopefully fix VKMS CI tests. Drop meta_test_disconnect_connect changes
again.
v4:
* Use hash table instead of list for hotplug_events set. (Sebastian Wick)
* Add comment describing the keys & values in the hash table. (Sebastian Wick)
* Add KMS debug logging in handle_hotplug_event as well.
* Dropped Closes:, this might not suffice to fully address
https://gitlab.gnome.org/GNOME/mutter/-/issues/3831 after all.
v5:
* Simplify hash table annotation comment. (Sebastian Wick)
v6:
* Rename hotplug_timeout local string pointer to hotplug_event.
* Drop g_clear_pointer in favour of g_autofree in on_udev_hotplug.
(Sebastian Wick)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4209>
Handle NULL string pointer in meta_kms_update_states_in_impl.
Drop second parameter of meta_kms_update_states_sync, which wasn't used
by the external test caller anyway. Split out static update_states_sync
function which takes a hotplug event string pointer instead.
Preparation for next commit.
v2:
* Drop UpdteStatesData for encoded hotplug event strings.
v3:
* Put device path at the end of encoded string, allows simplifying
meta_kms_update_states_in_impl slightly further.
v4: (Sebastian Wick)
* Use g_autofree for hotplug_event string in on_udev_hotplug, fixes
leak.
* Store pointer to hotplug event device path string in local variable in
meta_kms_update_states_in_impl.
v5:
* Initialize `path` local variable to `NULL` and test it instead of the
`hotplug_event` parameter. Avoids (false-positive) compiler warning
about `path` possibly being used uninitialized.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4209>
It forced the power save mode to META_POWER_SAVE_ON when reading the
current KMS state.
This was problematic when a hotplug event is emitted while the session
is locked, which can be triggered by monitors polling all their inputs
for a signal: There's no mechanism to restore the previous power save
mode in this case, so the monitors would fail to actually enter power
saving mode but stayed on with a blank screen. This was at least one
cause of the symptoms described in
https://gitlab.freedesktop.org/drm/amd/-/issues/662 .
Moreover, I suspect it hasn't had any effect for the actual reading of
KMS state since 5f6aee341959 ("kms/update: Make power saving an update
wide change"), as changing the power save mode to META_POWER_SAVE_ON no
longer results in any immediate KMS state change, it's now only taken
into account for the next mode set.
It's not clear what the intended effect was in the first place, it was
originally added as part of 65db8efbe8b1 ("MonitorManager: add a KMS
backend") without rationale. It might have been cargo-culted from
somewhere else. It shouldn't be necessary from a KMS API PoV though.
Also adjust the KMS hotplug test to assert that a hotplug event doesn't
implicitly change the power save mode.
v2: (Sebastian Wick)
* Fix shortlog of commit which added
meta_monitor_manager_native_read_current_state.
v3:
* Adjust KMS hotplug test for the change.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4209>
Unused since f27ca241f9a2 ("renderer/native: Move per frame KMS update
to MetaFrameNative") / a6baa77eab89 ("kms: Split out impl/non-impl
separation into MetaThread(Impl)").
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4209>
Don't try to realize the cursor sprite for the HW cursor when it's set.
v2:
* Refactor is_hw_cursor_supported helper out of
realize_cursor_sprite_from_wl_buffer_for_crtc. (Jonas Ådahl)
v3:
* Keep meta_crtc_native_is_hw_cursor_supported check in
meta_cursor_renderer_native_update_cursor, to try and avoid
mysterious CI failure.
v4:
* Rename is_hw_cursor_supported → is_hw_cursor_available_for_gpu
and take a MetaGpuKms * parameter.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4272>
The method currently returns the stage itself when the property
is NULL.
This has become particularly problematic as the method is detected
as getter by gobject introspection, and gjs now optimizes property
accesses by calling the getter method instead.
Address this by turning the method into a genuine getter without
falling back to the stage.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4256>
It's analogous to discard_pending_page_flips but represents swaps that
might become flips after the next frame notification callbacks, thanks
to triple buffering. Since the views are being rebuilt and their onscreens
are about to be destroyed, turning those swaps into more flips/posts would
just lead to unexpected behaviour (like trying to flip on a half-destroyed
inactive CRTC).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1441>
All paths out of `meta_onscreen_native_swap_buffers_with_damage` from
here onward would set the same `CLUTTER_FRAME_RESULT_PENDING_PRESENTED`
(or terminate with `g_assert_not_reached`).
Even failed posts set this result because they will do a
`meta_onscreen_native_notify_frame_complete` in
`page_flip_feedback_discarded`.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1441>
This is a case that triple buffering will encounter. We don't want it
to queue the same onscreen multiple times because that would represent
multiple flips occurring simultaneously.
It's a linear search but the list length is typically only 1 or 2 so
no need for anything fancier yet.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1441>
By definition, headless means no HW display output, so initializing HW
cursor support makes no sense.
Fixes hitting the g_warning in tests when there's a GPU device
available, breaking them.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4259>
When Input Capture was enabled on Input Leap server startup and then
finalized when Input Leap server was stopped, switching keymap was
still triggering its on_keymap_changed callback, but on a freed session
thus triggering use after free a segfault.
Fixes: 2fb3bdf77 - input-capture: Hook up capturing of events to active session
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3360
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4257>
Probe all RGBA 8888 variants.
If there's a GBM device, prefer a format also supported by GBM, if any.
Fall back to dumb BOs otherwise.
This allows the HW cursor to work correctly using BGRA8888 on s390x.
v2:
* Rename get_cursor_format_info → find_cursor_format_info.
* Log device path if we can't find any suitable cursor plane format.
v3:
* Split cursor_planes_support_format helper out of
find_cursor_format_info to make logic clearer. (Sebastian Wick)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4255>
Without doing this, a non-linear color state transformation could result
in premultiplied colour values larger than the alpha value, which
manifested with artifacts such as parts of the cursor shining brighter
than SDR white (with HDR enabled).
This was reported in the GNOME Shell Matrix room on August 8th 2024, and
I later hit it myself.
v2:
* Fix add_pipeline_snippet function formatting. (Sebastian Wick)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4224>
The "seat" property is already used by the parent
ClutterVirtualInputDevice - re-using this property means the parent's
propery never gets set so clutter_virtual_input_device_get_seat()
returns NULL.
This causes mutter to crash if a tablet pad sends a key event via a pad
ring or strip.
Since this type is only ever constructed with a MetaSeatNative as seat
we can extract that object through the parent and drop our property.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/4247>
