Since we're using xcb now, not Xlib, it doesn't have the stupid silly
thing where it copies all 32-bit data to 64-bit data to match the
long-y-ness of it.
It seems the largest possible value is to be passed, so actually pass
that instead. Note that even though the name of the xcb_get_property
parameter is called 'long_length' its actually a uint32_t.
https://bugzilla.gnome.org/show_bug.cgi?id=751136
This piece of code hooks in both wl_data_device and the relevant X
selection events, an X11 Window is set up so it can act as the clipboard
owner when any wayland client owns the selection, reacting to
SelectionRequest events, and returning the data from the wayland client
FD to any X11 requestor through X properties.
In the opposite direction, SelectionNotify messages are received,
which results in the property contents being converted then written
into the wayland requestor's FD.
This code also takes care of the handling incremental transfers through
the INCR property type, reading/writing data chunk by chunk.
https://bugzilla.gnome.org/show_bug.cgi?id=738312
Since commit 6e06648f7, we start out with the invisible frame parts
only, and then add the unconstrained rect's height (which consists of
the visible parts of both frame and client window) *unless* the window
is shaded. While we indeed don't want to add the client height in that
case, we need to explicitly include the visible frame parts now.
https://bugzilla.gnome.org/show_bug.cgi?id=746145
The timer to blacklist the window from frame sync is set at the time of
issuing the sync request, but not removed until the client replies to
the most recent wait serial.
This means that if the client is slowly catching up, the timeout would
fire up regardless of the client slowly updating the alarm to older
values.
Fix this by ensuring the timeout is reset everytime the sync request
counter is updated, to acknowledge the client is not irresponsive,
just slow.
https://bugzilla.gnome.org/show_bug.cgi?id=740424
In order to switch to the correct surface actor scale given the monitor
the surface is on, without relying on the client committing a new state
given some other side effect, sync the surface actor state when the main
monitor associated with the corresponding window changed.
https://bugzilla.gnome.org/show_bug.cgi?id=744933
Kerbel Space Program, and perhaps some other SDL-based programs, use
a really dumb way of specifying icons, which is totally
non-standards-compliant.
The ICCCM specifies that the icon_pixmap field of WM_HINTS should be a
1-bit-deep Pixmap, but we've seen applications set it to a pixmap of the
root depth as well, so we support that.
Kerbel Space Program seems to use it with a 32-bit depth Pixmap,
signifying ARGB32 (which it is), along with a 1-bit icon_mask, which
crashes us.
Keep in mind that Pixmaps, by definition, have no Visual attached, so
we simply have to make a guess at the correct visual based on the
depth. Do that by assuming that a depth-32 visual always means ARGB32,
which is a pretty safe bet.
Windows that set empty input shapes get n_rects of 0 when querying them
later, which makes sense, but the code that interpreted the result
translated it into a NULL input shape, which meant it was the same as
the bounding region. As such, an empty input shape would actually get
interpreted as a full input shape!
We, ourselves, set an empty input shape on tray icon windows in
gnome-shell since we would handle the picking ourselves. This meant that
we'd actually get the MetaSurfaceActorX11 when hovering over the tray
icon, instead of the ShellGTKEmbed that we capture events on and react
to.
This fixes weird tray icon behavior in gnome-shell.
We clip the input region to the client rect, so the client rect should
be up to date before we fetch the input region.
This fixes popup windows not working in GTK+2 under Wayland.
We should also update the shape / input regions when the window is
reconfigured for a complete fix, so that making an O-R window bigger
doesn't confuse mutter, but let's leave that to a future commit.
The coordinates in ConfigureNotify *should* be the coordinates of the
client window; using the coordinates of the frame window compensated for
a problem with the interpretation of StaticGravity for some clients but
broke other clients.
This reverts commit f4f70afe31.
https://bugzilla.gnome.org/show_bug.cgi?id=736719
This prevents issues from happening when processing Enter/Leave events
while in another kind of grab op like a Wayland popup or resizing a
window.
This can't ever really happen except outside of a race condition,
with the X server, since we won't ever pass input events to the
X server in any of these cases, but it can't hurt to be more correct
about what the intended operation is.
GTK+ focuses its own windows with RevertToParent, which means that when
a GTK+ CSD window is destroyed, the X server will set the focus back to
the root window. The event stream that we is an UnmapNotify followed by
a FocusOut event. Our own UnmapNotify-handling code unmanages the window
and forcibly changes the focus to the next default window in the stack.
Since UnmapNotify events don't come with timestamps, we query for one,
and set the window focus using that.
But there's *still* a FocusOut event in the stack, with an older
timestamp and serial than our own focusing. We see this, throw it out
since it's older than the most recent focus, but then our own code that
notices the root has been focused kicks in and tries to focus the
default window... using a timestamp older than our most recent focusing.
meta_display_sanity_check_timestamps notices this, and (rightly so)
puts a warning in our face, telling something is awry.
Only let our workarounds kick in when the event is new enough, otherwise
our code will get confused over old events.
This stops the:
Window manager warning: last_focus_time (367917173) is greater than comparison timestamp (367917170). This most likely represents a buggy client sending inaccurate timestamps in messages such as _NET_ACTIVE_WINDOW. Trying to work around...
warning spam when closing a CSD window.
The merge of the commit af46ef3b 'meta_window_new: clean up error handling'
to the wayland branch accidentally added an extra call to meta_error_trap_push(),
meaning that we leaked one level of error traps for each new window.
Fixes warning:
Gdk-WARNING **: XSetErrorHandler() called with a GDK error trap pushed.
https://bugzilla.gnome.org/show_bug.cgi?id=736589
When the screen resizes, we get a configure event for the composite overlay
window - don't pass that to MetaStackTracker, since the COW isn't in the
stack.
Fixes warning:
mutter-WARNING **: STACK_OP_RAISE_ABOVE: window 0x65 not in stack
Add a private hook for the test framework to get XSyncAlarmEvent events -
this will be used to implement XSyncCounter based synchronization
so that the test framework can deterministically wait until Mutter
has seen actions performed by an X11 client.
https://bugzilla.gnome.org/show_bug.cgi?id=736505
Before, we were using the root window coordinates of the client window,
rather than the toplevel frame window. This caused various Java programs
and programs like VirtualBox and WINE to get confused about where their
window actually is, and make bad ConfigureRequests when trying to
position their windows in the future.
Remove the mass of code here by just using window->rect.
The existing workspace management code is quite hairy, with plenty of
logic inline in all of window.c, workspace.c, and screen.c, making it
hard to understand or make changes to, since you might forget to change
several of the other places the code was around.
Rewrite the internal workspace management logic so that it's
centralized and all in window.c. Document the invariants we need to
maintain, and ensure that these invariants are properly kept, with
asserts in various places.
Extensive testing on gnome-shell did not bring up any issues, and this
is a considerable cleanup.
Since commit 467465c99c we use meta_stage even on x11 which sets
clutter_stage_set_user_resizable to FALSE.
This messes things up because we ought to ignore the properties on the window
but we apperently didn't.
There is no reason why we'd want to manage the stage window.
https://bugzilla.gnome.org/show_bug.cgi?id=734852
Since commit a7b7213017, we rely on the standard property
system to initialize the window type (and likewise for the window
role since commit 031154a400). However as property hooks are
never run for properties that are not set, we end up not initializing
the window type correctly for windows with no _NET_WM_WINDOW_TYPE
property (which includes virtually all OR windows, causing them to
show up in pagers and the Shell overview and resulting in frequent
crashes due to breaking reasonable assumptions all over the place).
Introduce a new FORCE_INIT flag to allow forcing hooks to run
even when the corresponding property is unset, and use it for
both _NET_WM_WINDOW_TYPE and _NET_WM_WINDOW_ROLE.
This is so we won't poke into the MetaDisplay, which is invalid memory,
and crash. This can sometimes work right now because GSlice might not
deallocate the object immediately, but it's still not a fun thing to do.
Properties like _NET_WM_DESKTOP and _NET_WM_STATE are supposed to be
ignored after the initial map of the window, so ignore any
PropertyNotifies for these.
GTK+ likes to set these, well, _NET_WM_OPAQUE_REGION in particular, to
the same value. Save some expensive and processing when this happens. We
should probably make GTK+ smarter.
When workspaces-only-on-primary is set and a window is moved back to the
primary, we also move it to the active workspace to avoid the confusion
of a visible window suddenly disappearing when crossing the monitor border.
However when the window is not actually moved by the user, preserving the
workspace makes more sense - we already do this in some cases (e.g. when
moving between primary monitors), but miss others (unplugging the previous
monitor); just add an explicit user_op parameter as used elsewhere to cover
all exceptions.
https://bugzilla.gnome.org/show_bug.cgi?id=731760
Rather than calculate it speculatively with the current properties
which may be too new or too out of date, make sure it always fits
with the proper definition. We update it when we update the toplevel
window for X11, and when a Wayland surface is committed with a newly
attached buffer.
There's a race here. If an OR window hides itself, moves, and then shows
itself, we will send a ConfigureNotify for the old size of the window
and might receive it after the client moves itself, causing us to show
the window at the wrong location.
Simply not sending the ConfigureNotify is the easiest thing to do.
Before we unmanage, we send a ConfigureNotify to clients to let them
know if their frame is destroyed. We do this for OR windows too, even if
we really probably shouldn't.
This is based off of the client_rect. Since we listen to ConfigureNotify
on OR windows, we'll receive the event. If we don't ever update the
client_rect when moving or resizing OR windows, then we'll send
ourselves a ConfigureNotify for a 0x0 size and then think that the
client chose a new size for itself. Since our get_paint_volume is based
on that rectangle, but the TFP code inside Cogl uses XGetGeometry
itself, we get weird flickering artifacts.
For Wayland, we want to have everything possible in terms of the frame
rect, or "window geometry" as the Wayland protocol calls it, in order
to properly eliminate some flashing when changing states to fullscreen
or similar.
For this, we need to heavily refactor how the code is structured, and
make it so that meta_window_move_resize_internal is specified in terms
of the frame rect coordinate space, and transforming all entry points
to meta_window_move_resize_internal.
This is a big commit that's hard to tear apart. I tried to split it
as best I can, but there's still just a large amount of changes that
need to happen at once.
Expect some regressions from this. Sorry for any temporary regression
that this might cause.
The last commit added support for the "appmenu" button in decorations,
but didn't actually implement it. Add a new MetaWindowMenuType parameter
to the show_window_menu () functions and use it to ask the compositor
to display the app menu when the new button is activated.
https://bugzilla.gnome.org/show_bug.cgi?id=730752
The requested_rect is a strange name for it, because it's not actually
the rect that the user or client requested all the time: in the case of
a simple move or a simple resize, we calculate some of the fields
ourselves.
To the MetaWindow subclass implementations, it just means "the rect
before we constrained it", so just use the name unconstrained_rect.
This also makes it match the name of the MetaWindow field.
