670 Commits

Author SHA1 Message Date
Jonas Ådahl
092c5304a9 crtc: Move MetaCrtcConfig field to instance private
Last piece before MetCrtc can be made a derivable type.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
2020-06-10 18:54:50 +00:00
Jonas Ådahl
c3fc6025b1 crtc: Move all_transforms field into instance private
Now set as a property during construction. Only actually set by the
Xrandr backend, as it's the only one currently not supporting all
transforms, which is the default.

While at it, move the 'ALL_TRANFORMS' macro to meta-monitor-tranforms.h.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
2020-06-10 18:54:50 +00:00
Jonas Ådahl
1406348be4 output: Move output info to MetaOutputInfo struct
The output info is established during construction and will stay the
same for the lifetime of the MetaOutput object. Moving it out of the
main struct enables us to eventually clean up the MetaOutput type
inheritence to use proper GObject types.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
2020-06-10 18:54:50 +00:00
Jonas Ådahl
b69111d8e6 monitor-manager: Rename *Info structs to *Assignment
MetaCrtcInfo and MetaOutputInfo did not represent information about
MetaCrtc and MetaOutput, but the result of the monitor configuration
assignment algorithm, thus rename it to MetaCrtcAssignment and
MetaOutputAssignment.

The purpose for this is to be able to introduce a struct that actually
carries information about the CRTCs and outputs, as retrieved from the
backend implementations.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
2020-06-10 18:54:50 +00:00
Jonas Ådahl
f71316c850 output: Move configureable state to instance private
That is is_presentation, is_primary, is_underscanning and backlight.

The first three are set during CRTC assignment as they are only valid
when active. The other is set separately, as it is untied to
monitor configuration.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
2020-06-10 18:54:50 +00:00
Jonas Ådahl
9186b6d6b0 monitor-manager: Remove is_dirty from MetaCrtc and MetaOutput
It was used during configuration to ensure that we always dealt with
every output and CRTC. Do this without polluting the MetaOutput and
MetaCrtc structs with intermediate variables not used by the
corresponding types themself.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
2020-06-10 18:54:50 +00:00
Jonas Ådahl
e063947a16 output: Move winsys_id into instance private and rename to id
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
2020-06-10 18:54:50 +00:00
Jonas Ådahl
a42eed0231 crtc: Move CRTC id field into instance private
Set during construction, retrieved using helper.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
2020-06-10 18:54:50 +00:00
Jonas Ådahl
f4fd92d8e8 output: Move MetaGpu field to instance private
Set during construction only, retrieved using helper.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
2020-06-10 18:54:50 +00:00
Jonas Ådahl
2ebd43cba9 crtc: Move MetaGpu field to instance-private
Users either set during construction, or get via the helper.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
2020-06-10 18:54:50 +00:00
Jonas Ådahl
569a183828 crtc: Move renderer private to MetaKmsCrtc
It's used only by the native cursor renderer.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
2020-06-10 18:54:49 +00:00
Jonas Dreßler
8127494e52 clutter/stage: Rename update_resource_scales to clear_stage_views
When the stage views the stage is shown on are changed, ClutterStage
currently provides a clutter_stage_update_resource_scales() method
that allows invalidating the resource scales of all actors. With the new
stage-views API that's going to be added to ClutterActor, we also need a
method to invalidate the stage-views lists of actors in case the stage
views are rebuilt and fortunately we can re-use the infrastructure for
invalidating resource scales for that.

So since resource scales depend on the stage views an actor is on,
rename clutter_stage_update_resource_scales() and related methods to
clutter_stage_clear_stage_views(), which also covers resource scales.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1196
2020-06-09 16:07:46 +00:00
Peter Hutterer
f712387325 compositor: use XDG_CONFIG_HOME as initial lookup path for xkb
Using XDG_CONFIG_HOME allows users to place their keyboard configuration into
their home directory and have them loaded automatically.
libxkbcommon now defaults to XDG_CONFIG_HOME/xkb/ first, see
https://github.com/xkbcommon/libxkbcommon/pull/117

However - libxkbcommon uses secure_getenv() to obtain XDG_CONFIG_HOME and thus
fails to load this for the mutter context which has cap_sys_nice.
We need to manually add that search path as lookup path.

As we can only append paths to libxkbcommon's context, we need to start with
an empty search path set, add our custom path, then append the default search
paths.

The net effect is nil where a user doesn't have XDG_CONFIG_HOME/xkb/.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/936
2020-06-08 11:29:30 +00:00
Jonas Ådahl
55302dbb38 cursor-renderer: Pass backend to constructor
Then use the backend passed instead of the global singleton.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1289
2020-06-05 21:39:27 +00:00
Jonas Ådahl
7876018755 backends/native: Get clutter backend from backend
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1289
2020-06-05 21:39:27 +00:00
Jonas Ådahl
c823b5ddba renderer-native: Don't leak DMA buffer CoglFramebuffer
When we created the DMA buffer backed CoglFramebuffer, we handed it over
to CoglDmaBufHandle which took its own reference. What we failed to do
was to release our own reference to it, effectively leaking it.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1283
2020-06-02 18:39:27 +02:00
Carlos Garnacho
f8e2234ce5 backends/native: Drop external keyboard detection for ::touch-mode
This cannot be made to work reliably. Some factoids:

- Internal devices may be connected via USB.
- The ACPI spec provides the _PLD (Physical location of device) hook to
  determine how is an USB device connected, with an anecdotal success
  rate. Internal devices may be seen as external and vice-versa, there is
  also an "unknown" value that is widely used.
- There may be non-USB keyboards, the old "AT Translated Set 2 Keyboard"
  interface does not change on hotplugging.
- Libinput has an internal series of quirks to classify keyboards as
  internal of external, also with an "unknown" value.

These heuristics are kinda hopeless to get right by our own hand. Drop
this external keyboard detection in the hope that there will be something
more deterministic to rely on in the future (e.g. the libinput quirks
made available to us directly or indirectly).

Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2378
Related: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2353

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1277
2020-05-29 14:37:21 +00:00
Jonas Ådahl
1571f8078a Reshuffle Wayland initailization
Move Wayland support (i.e. the MetaWaylandCompositor object) made to be
part of the backend. This is due to the fact that it is needed by the
backend initialization, e.g. the Wayland EGLDisplay server support.

The backend is changed to be more involved in Wayland and clutter
initialization, so that the parts needed for clutter initialization
happens before clutter itself initialization happens, and the rest
happens after. This simplifies the setup a bit, as clutter and Wayland
init now happens as part of the backend initialization.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1218
2020-05-26 16:35:00 +02:00
Jonas Ådahl
346cadeddb renderer/native: Only enable shadowfbs if we can blit
There is no point in enabling shadow buffers if we can't as that'd be
even slower than not having them at all.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1237
2020-05-26 13:54:28 +00:00
Jonas Ådahl
f4d9953b9c renderer-native: Move shadow fb construction to the stage view
The stage view will need a more involved approach to shadow buffers, in
order to implement things such double buffered shadow buffers and damage
detection.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1237
2020-05-26 13:54:27 +00:00
Jonas Ådahl
6db94a0b77 clutter/stage-view: Add name property
Will be used for logging to identify what view a log entry concerns. For
the native and nested backend this is the name of the output the CRTC is
assigned to drive; for X11 it's just "X11 screen", and for the legacy
"X11 screen" emulation mode of the nested backend it's called "legacy
nested".

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1237
2020-05-26 13:54:27 +00:00
Jonas Ådahl
4434a17d08 cogl/dma-buf-handle: Pass more metadata to handle constructor
Could be useful would one want to mmap the dmabuf and deal with its
content manually in CPU space.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1237
2020-05-26 13:54:27 +00:00
Jonas Ådahl
0fbda366e8 native: Return an error if no drm devices are found
Without this, we'll end up segfaulting when trying to log the
non-existing error.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1217
2020-05-22 20:25:06 +00:00
Carlos Garnacho
e073076119 backends/native: Unset the correct button codes when a virtual device is destroyed
We were iterating through evcodes, but using API that expects Clutter button
numbers. Instead of transforming those to Clutter numbers to have those translated
back, use the inner seat API that already takes evcodes.

Fixes stuck buttons keys after a virtual device is destroyed while those are
pressed.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1239
2020-05-07 17:01:05 +00:00
Pekka Paalanen
36111270aa kms-impl/simple: Fix page_flip_data ref leak on fallback
If drmModePageFlip() or custom_page_flip_func fails, process_page_flip() was
forgetting to undo the ref taken for that call. This would leak page_flip_data.

The reference counting works like this:
- when created, ref count is 1
- when calling drmModePageFlip, ref count is increased to 2
- new: if flip failed, ref count is decreased back to 1
- if calling schedule_retry_page_flip(), it takes a ref internally
- if calling mode_set_fallback(), it takes a ref internally
- all return FALSE paths have an explicit unref
- return TRUE path has an explicit unref

This issue was found by code inspection and while debugging an unrelated issue
with debug prints sprinkled around. I am not aware of any end-user visible
issues being fixed by this, as the leak is small and probably very rare.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1209
2020-04-23 16:30:22 +03:00
Pekka Paalanen
6e0cfd3e55 kms: Make GSource ready by default
When testing a laptop with intel and DisplayLink devices, attempting to set the
DL output as the only active output resulted in GNOME/Wayland freezing. The
main event loop was running fine, but nothing on screen would get updated once
the DL output become the only one. This patch fixes that issue.

DisplayLink USB 3 devices use an out-of-tree kernel DRM driver called EVDI.
EVDI can sometimes fail drmModePageFlip(). For me, the flip fails reliably when
hotplugging the DL dock and when changing display configuration to DL only.
Mutter has a workaround for failing flips, it just calls drmModeSetCrtc() and
that succeeds.

What does not work reliably in the fallback path is Mutter keeping track of the
pageflip. Since drmModePageFlip() failed, there will not be a pageflip event
coming and instead Mutter queues a callback in its stead. When you have more
than one output, some other output repainting will attempt to swap buffers and
calls wait_for_pending_flips() which has the side-effect of dispatching any
queued flip callbacks. With multiple outputs, you don't get stuck (unless they
all fail the exact same way at the same time?). When you have only one output,
it cannot proceed to repaint and buffer swap because the pageflip is not marked
complete yet. Nothing dispatches the flip callback, leading to the freeze.

The flip callback is intended to be an idle callback, implemented with a
GSource. It is supposed to be called as soon as execution returns to the main
event loop. The setup of the GSource is incomplete, so it will never dispatch.

Fix the GSource setup by setting its ready-time to be always in the past. That
gets it dispatched on the next cycle of the main event loop. This is now the
default behavior for all sources created by meta_kms_add_source_in_impl().
Sources that need a delay continue to do that by overriding the ready-time
explicitly.

An alternative solution could have been to implement GSource prepare and check
callbacks returning TRUE. However, since meta_kms_add_source_in_impl() is used
by flip retry code as well, and that code needs a delay through the ready-time,
I was afraid I might break the flip retry code. Hence I decided to use
ready-time instead.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1209
2020-04-23 16:30:17 +03:00
Jonas Ådahl
b9fe9c736a onscreen/native: Add API to check whether buffer is scanout compatible
While this is fairly incomplete, as to check things fully we need to use
TEST_ONLY in atomic to try out a complete assignment on the device, but
this works well enough for legacy non-modifier cases.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
2020-04-16 15:05:52 +02:00
Jonas Ådahl
3dd8861fbf renderer/native: Add API to get primary GPU
Will be used when acquiring scanouts from Wayland buffers.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
2020-04-16 15:05:52 +02:00
Jonas Ådahl
3da8c1bfdc cogl/onscreen: Add API to scanout a buffer directly
Instead of always swapping buffers and flipping the back buffer, make it
possible to scan out a provided buffer directly without swapping any EGL
buffers.

A buffer is passed as an object implementing the empty CoglScanout
interface. It is only possible to do this in the native backend; and the
interface is implemented by MetaDrmBufferGbm. When directly scanned out,
instead of calling gbm_surface_lock_front_buffer() to get the gbm_bo and
fbid, get it directly from the MetaDrmBufferGbm, and use that to create
the page flip KMS update.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
2020-04-16 15:05:15 +02:00
Jonas Ådahl
282aada13a drm-buffer/gbm: Support both surface and standalone buffers
Surface buffers are created with meta_drm_buffer_new_acquire(), taking a
gbm_surface acquiring the gbm itself, and meta_drm_buffer_new_take()
that takes over ownership of a passed gbm_bo.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
2020-04-16 14:08:19 +02:00
Jonas Ådahl
3d47c7edc1 cursor-renderer-native: Take CRTC transform into account
The CRTC level transform (not necessarily the hw transform) must be
taken into account when calculating the position of the CRTC in the
stage coordinate space, when placing the hw cursor, otherwise we'll
place the cursor as if the monitor was not rotated.

This wasn't a problem in the past, as with rotation, we always used the
OpenGL cursor, so the issue newer showed.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1199
2020-04-15 15:29:55 +00:00
Jonas Ådahl
bc350f37f5 renderer-native: Use CRTC layout in stage view
The port to per CRTC views was incomplete; we still used the logical
monitor layout as the stage view layout, while still using one view per
CRTC.

This worked fine for most cases, e.g. regular monitors, tiled or
non-tiled, transformed or non-transformed. Where it broke, however, was
when a monitor consists of multiple CRTCs. We already have the layout a
CRTC corresponds to on the stage kept with the CRTC metadata, so use
this directly.

Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1170

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1199`
2020-04-15 15:29:55 +00:00
Jonas Troeger
50fa002a19 backends/native: Translate coordinates of absolute motion events
The motion events of tablets for example need to be mapped on the
selected screen area if the input device is configured to use only a
part of the active logical monitor.
To achieve this behavior each motion event is transformed using the
transformation matrix set for the input device.

Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1118
2020-04-07 17:50:11 +00:00
Jonas Dreßler
9f31e7252c backends/native: Release virtual buttons on dispose instead of finalize
GObject recommends to break references to other objects on dispose
instead of finalize, also we want to release the pressed virtual buttons
as early as possible if we know the object is getting destroyed.

So release the pressed buttons and unref our virtual
MetaInputDeviceNative when the dispose vfunc is called, which also
allows us to release the buttons immediately from javascript instead of
waiting for the garbage collector by calling run_dispose() on the
object.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1157
2020-03-28 16:55:59 +00:00
Hans de Goede
da600b8400 cursor-renderer-native: Take panel-orientation into account for sprite transform
When calculating the transform we should apply to the cursor sprite
before uploading it to the cursor plane, we must also take into
account non upright mounted LCD panels.

Otherwise the cursor ends up 90 degrees rotated on devices where the
LCD panel is mounted 90 degrees rotated in its enclosure.

This commit fixes this by calling meta_monitor_logical_to_crtc_transform
in get_common_crtc_sprite_transform_for_logical_monitors to adjust the
transform for each Monitor in the LogicalMonitor.

Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1123

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1153
2020-03-27 15:10:35 +00:00
Jonas Ådahl
a68e6972a2 cursor-renderer-native: Set cursor hotspot metadata on plane assignment
This triggers the paths in the legacy KMS backend to use
drmModeSetCursor2(), making virtual machines using "seamless mouse mode"
behave correctly again.

Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/1094

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1136
2020-03-26 16:18:28 +00:00
Jonas Ådahl
55cf1c1496 kms/plane-assignment: Add API to set cursor hotspot metadata
The transactional KMS API has been modelled after atomic KMS. Atomic KMS
currently doesn't support forwarding cursor hotspot metadata, thus it
was left out of the transactional KMS API having the user set the simply
create a plane assigment with the cursor sprite assigned to a cursor
plane using regular coordinates.

This, however, proved to be inadequate for virtual machines using
"seamless mouse mode" where they rely on the cursor position to
correspond to the actual cursor position of the virtual machine, not the
cursor plane. In effect, this caused cursor positions to look "shifted".

Fix this by adding back the hotspot metadata, right now as a optional
field to the plane assignment. In the legacy KMS implementation, this is
translated into drmModeSetCursor2() just as before, while still falling
back to drmModeSetCursor() with the plane coordinates, if either there
was no hotspot set, or if drmModeSetCursor2() failed.

Eventually, the atomic KMS API will learn about hotspots, but when
adding our own atomic KMS backend to the transacitonal KMS API, we must
until then still fall back to legacy KMS for virtual machines.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1136
2020-03-26 16:18:28 +00:00
Jonas Ådahl
238e41d493 cogl: Install cogl-trace.h and include from cogl.h
This is so that cogl-trace.h can start using things from cogl-macros.h,
and so that it doesn't leak cogl-config.h into the world, while exposing
it to e.g. gnome-shell so that it can make use of it as well. There is
no practical reason why we shouldn't just include cogl-trace.h via
cogl.h as we do with everything else.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/1059
2020-03-26 09:05:38 +01:00
Carlos Garnacho
1f00aba92c backends: Add MetaInputDevice derivable class
This class sits between ClutterInputDevice and the backend implementations,
it will be the despositary of features we need across both backends, but
don't need to offer through Clutter's API.

As a first thing to have there, add a getter for a WacomDevice. This is
something scattered across and somewhat inconsistent (eg. different places
of the code create wacom devices for different device types). Just make it
here for all devices, so users can pick.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1109
2020-03-24 18:07:31 +00:00
Peter Hutterer
7fa7c2aeb7 backends: use the enum name instead of a literal 0
No functional change.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1144
2020-03-24 15:46:43 +10:00
Jonas Ådahl
0a6034ef3a monitor-manager: Remove 'mirror' capability
With per-CRTC views, there is nothing stopping NVIDA EGLStream based
rendering to not support monitor mirroring, so lets remove that
restriction.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1098
2020-03-18 00:46:20 +00:00
Jonas Ådahl
c9a5b2b22f kms-impl-simple: Handle lack of cached mode set in flip fallback
When a page flip fails with a certain error code, we've treated this as
a hint that page flipping is broken and we should try to use mode
setting instead.

On some drivers, it seems that this error is also reported when there
was no mode set, which means we'll have no cached mode set to use in the
fallback. The lack of prior mode set tends to happen when we hit a race
when the DRM objects change before we have the time to process a hotplug
event.

Handle the lack a missing mode set in the flip fallback path, with the
assumption that we'll get a hotplug event that'll fix things up for us
eventually.

Closes: https://gitlab.gnome.org/GNOME/mutter/issues/917
2020-03-18 00:33:03 +00:00
Robert Mader
4133b73632 cursor-renderer/native: Skip hw cursor upload if we can't use it
If the CRTCs the cursor is visible on do not share a common scale
and transform, we can't use the cursor hardware plane as we only have one.
We therefore fall back to software / gl cursor.

The check for that currently happens after we tried to upload the cursor image
to the hardware plane though.
This is made worse by the fact that in the scaling step, where we scale the
cursor image to the desired size, until now we expected a valid common scale -
otherwise scaling the image by an uninitialized float.

Make sure we bail out early during the scale/upload step if we don't have common
scales and transforms - to avoid that bug and save some unnecessary work.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1125
2020-03-16 21:51:30 +01:00
Andrew Gaul
0487e6f11f input-settings: Wire up middle-emulation
This allows emulating middle click via simultaneous left and right
click.  Fixes #238.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/256
2020-03-15 13:04:32 +09:00
Jonas Ådahl
5319949a45 kms-impl-device: Clean up state if drm resources disappear
It may happen that drmModeGetResources() starts returning NULL. Handle
this gracefully by removing all connectors, CRTCs and planes making the
device in practice defunct.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1121
2020-03-12 13:08:46 +00:00
Pekka Paalanen
8abdf16a39 cursor-renderer/native: Handle GPU hotplug
Listen for GPU hotplug events to initialize their cursor support.

This fixes one reason for why DisplayLink devices may not be using a hardware
cursor. Particularly, when a DisplayLink device is hotplugged for the first
time such that EVDI creates a new DRM device node after gnome-shell has already
started, we used to forget to initialize the cursor support.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/1097
2020-03-10 08:26:17 +00:00
Pekka Paalanen
4cc29cfb61 cursor-renderer/native: Refactor init to per-gpu
Extract the code to initialize a single GPU cursor support into its own
function. The new function will be used by GPU hotplug in the future.

This is a pure refactoring without any behavioral changes.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/1097
2020-03-10 08:26:17 +00:00
Jonas Ådahl
6e966e47f2 cursor-renderer-native: Handle lack of cursor planes gracefully
While we will always have cursor planes, as we'll currently create fake
ones when real ones are missing (See #1058), eventually we will run into
situations where we can't create fake ones, for example for atomic KMS
drivers that don't advertise any cursor planes.

https://gitlab.gnome.org/GNOME/mutter/merge_requests/1079
2020-03-07 21:40:50 +00:00
Jonas Ådahl
227eea1e31 kms-impl-simple: Add fake cursor planes if no real ones
Non-atomic drivers may support drmModeSetCursor() even if no cursor
plane is advertised. To deal with this, add a fake cursor plane for
every CRTC when using MetaKmsImplSimple. This will eventually be
translated to drmModeSetCursor() calls without any explicit cursor plane
usage.

Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/1058

https://gitlab.gnome.org/GNOME/mutter/merge_requests/1079
2020-03-07 21:40:50 +00:00
Jonas Ådahl
390fd7ddcf cursor-renderer-native: Fix hw cursor for non-square sprites
wl_shm_buffer_get_width() was used where wl_shm_buffer_get_height()
should have used, resulting in only square cursors working. Make
rectangular cursors work again.

https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1099
2020-02-28 21:49:58 +00:00