This change fixes the issue where the cursor is always
embedded in the frames even when the client has requested
the cursor information be sent as metadata in the stream.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2629>
Some mice send a value slightly lower than 120 for some detents. The
current approach waits until a value of 120 is reached before sending a
low-resolution scroll event.
For example, the MX Master 3 sends a value of 112 in some detents:
detent detent
| | |
^ ^ ^
112 REL_WHEEL 224
As illustrated, only one event was sent but two were expected. However,
sending the low-resolution scroll event in the middle plus the existing
heuristics to reset the accumulator solve this issue:
detent detent
| | |
^ ^ ^ ^
REL_WHEEL 112 REL_WHEEL 224
Send low-resolution scroll events in the middle of the detent to solve
this problem.
Fix https://gitlab.gnome.org/GNOME/mutter/-/issues/2469
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2668>
Previously, when scroll was received in a remote session, it was handled
as continuous scroll.
This generated issues with clients without high-resolution scroll
support as the code path in charge of accumulating scroll until 120 is
reached was not used and therefore discrete scroll events were not being
generated.
Handle scroll generated in a remote session as discrete scroll when the
source is CLUTTER_SCROLL_SOURCE_WHEEL to fix this issue.
Fix https://gitlab.gnome.org/GNOME/mutter/-/issues/2473
Fixes: 9dd6268d13 ("wayland/pointer: Send high-resolution scroll data")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2664>
We have no way to sanely add safe modes if there are no modes we can
compare with, thus don't try.
Fixes the following crash:
#0 are_all_modes_equally_sized at ../src/backends/native/meta-output-kms.c:284
#1 maybe_add_fallback_modes at ../src/backends/native/meta-output-kms.c:310
#2 init_output_modes at ../src/backends/native/meta-output-kms.c:347
#3 meta_output_kms_new at ../src/backends/native/meta-output-kms.c:414
#4 init_outputs at ../src/backends/native/meta-gpu-kms.c:332
#5 meta_gpu_kms_read_current at ../src/backends/native/meta-gpu-kms.c:368
#6 meta_gpu_kms_new at ../src/backends/native/meta-gpu-kms.c:403
#7 create_gpu_from_udev_device at ../src/backends/native/meta-backend-native.c:461
#8 init_gpus at ../src/backends/native/meta-backend-native.c:551
#9 meta_backend_native_initable_init at ../src/backends/native/meta-backend-native.c:632
Fixes: 877cc3eb7d44e2886395151f763ec09bea350444
Related: https://bugzilla.redhat.com/show_bug.cgi?id=2127801
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2646>
This just checks for any chromaticity being zero and gamma being in
range but we could do a better job at detecting bad data in the future.
Also check the return value of cmsCreateRGBProfileTHR which can be NULL.
Fixes gnome-shell#5875
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2627>
Painting the swap region with CLUTTER_DEBUG_PAINT_DAMAGE_REGION happens
on the view framebuffer, so don't transform the region we paint to the
onscreen.
Fixes the swap region painting on rotated monitors.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2590>
This is an old relic from when ClutterStageView was being added, and
tests were somewhat prepared to be able to test the "X11 style" of
things, with the nested backend some how managing to emulate that.
Lets drop that stuff, it isn't used by the test suite, and isn't useful
anyway; if we want to test X11 configurations, we should use the actual
X11 backend, which didn't make use of this anyway.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2619>
This was used gala to implement hot corners, and the way the barrier API
works, there isn't really any practical reasons to not make it
derivable, since the backend is a separate type and object.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2626>
This adds a copy of the calibration test profile and sets up a test to
first add it as a system profile, then setting up the XDG_DATA_HOME
directory so that the duplicate profile is detected, added, and later
discarded.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2622>
We might fail with some part of the color profile construction and
initialization. For example there might be a system wide profile with
the same ID as one we attempt to add from a local ICC directory. When
this happens, we should drop these profiles, and use the ones from the
system instead.
Profiles may fail to initialize for other reasons too, e.g.
unpredictable colord errors, or other I/O issues.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2429
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2622>
If our profile wasn't fully initialized, we'd try to clean it up, in an
attempt to handle race conditions by finding synchronously then cleaning
it up, but don't attempt this if the profile is ready, as that means we
didn't create one in the first place.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2622>
This is instead of getting anything from the CdDevice. This avoids a
crash when CdDevice isn't successfully setup but something still tries
to look up the filename of the ICC profile.
This isn't a real bug fix for anything, but there is no reason having to
rely on CdDevice for this anyway, and as we don't really have control of
it, it's less reliable of containing something valid.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2622>
When creating a render device, we create a temporary EGLContext where we
then query the `GL_RENDERER` string to check whether the renderer is any
of the known software renderers. After we're done, we destroy the
context and move on.
This should be fine as according to specification eglDestroyContext(),
with the context being actually destroyed a bit later when it's no
longer current, but mesa, when running RK3399 (Pinebook Pro), this
results in a crash in a future eglMakeCurrent():
#0 in dri_unbind_context () at ../src/gallium/frontends/dri/dri_context.c:266
#1 in driUnbindContext () at ../src/gallium/frontends/dri/dri_util.c:763
#2 in dri2_make_current () at ../src/egl/drivers/dri2/egl_dri2.c:1814
#3 in eglMakeCurrent () at ../src/egl/main/eglapi.c:907
...
We can avoid this, however, by calling eglMakeCurrent() with
EGL_NO_CONTEXT on the EGLDisplay, prior to destroying, effectively
avoiding the crash, so lets do that.
Related: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7194
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2414
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2612>
EGLStream is incompatible with atomic mode setting, but nvidia-drm when
using libgbm is not, so lets only deny using atomic mode setting when
the render device is an EGLStream based one.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2578>
The type of render device used for a specific GPU affects the mode
setting backend that can be used, more specifically, when the render
device is an EGLStream based one, atomic mode setting isn't possible, as
page flipping is done via EGL, not via atomic mode setting commits.
Preparing the render devices before KMS devices means can make a more
informed decision whether to deny-list atomic mode setting for when
a certain GPU uses a EGLStream based render device instance.
This also means we need to translate mode setting devices to render node
devices when creating the render device itself, as doing it later when
creating the mode setting device is already too late.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2578>
Doing an early out in a constructed() is a bit awkward, and unexpected,
and makes it tricky to call the parents constructed() method (which we
didn't), so clean that up.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2578>
Currently, the peripheral "output" setting will be unset if Mutter is
deciding automatically the mapped output of a tablet device. In that
case, gnome-control-center will have a hard time figuring out itself
the better output to show the tablet calibration UI, unless it's hand
held by Mutter.
Add this private D-Bus interface so that gnome-control-center can look
up the output as determined by Mutter to bring the missing harmony
between both. This interface consists of a simple method to get the
mapped output for a input device node.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2605>
Following the EGL_KHR_swap_buffers_with_damage specification, the
surface damage used by eglSwapBuffersWithDamage does not need to
contain the damage history.
Rework that to initialize swap_region earlier, before appending the
damage history.
This may help optimizing the composition process in some cases (at least
on X11 when EGL_KHR_swap_buffers_with_damage is available) by not
accumulating additional regions as damaged unnecessarily.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2241>
If the vendor_name was previously successfully determined, we would end
up in the else case, overwriting it with "Unknown vendor" and leaking
the previous vendor_name.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2603>
This allows using two separate ICC profiles for one "color profile",
which is necessary to properly support color transform
calibration profiles from an EFI variable.
These types of profiles are intended to be applied using the color
transformation matrix (CTM) property on the output, which makes the
presented output match sRGB. In order to avoid color profile aware
clients making the wrong assumption, we must set the profile exposed
externally to be what is the expected perceived result, i.e. sRGB, while
still applying CTM from the real ICC profile.
The separation is done by introducing a MetaColorCalibration struct,
that is filled with relevant data. For profiles coming from EFI, a
created profile is practically an sRGB one, but the calibration data
comes from EFI, while for other profiles, the calibration data and the
ICC profile itself come from the same source.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2568>
We may want to use scanout even if the default framebuffer
of the stage view is an offscreen, for example when a Wayland
client provides pre-rotated buffers. The caller is responsible
to ensure this is correct - we already asserted on that before.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2468>
More or less copied from gnome-settings-daemon. The look up tables are
either calculated based on the VCGT (Video Card Gamma Table) and the
blackbody color for a given temperature, or the blackbody color for a
given temperature alone, if no VCGT is available.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
This means that e.g. custom profiles or calibrated profiles will be
added and registered with colord. This does not use CdIccStore for two
reasons: don't want to generate duplicate entries for auto-generated
EDID or EFI profiles, and we want to store profiles as MetaColorProfile.
It also happens to be the case that CdIcc does synchronous I/O, which
should be avoided everywhere except on startup.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
It will be used to generate gamma look up tables depending on
temperature.
The temperature comes from org.gnome.SettingsDaemon.Color and
depends on the current night light state.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
It uses the org.gnome.SettingsDaemon.Power.Screen D-Bus API. Currently
brightness set if the proxy is not ready are ignored; whether the
brightness value should be cached and set once it appears or whether
color profiles should be reapplied is yet to be decided.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
Instead of passing 4 arguments (red, green and blue arrays as well as a
size), always pass them together in a new struct MetaGammaLut. Makes
things slightly less tedious.
The KMS layer still has its own variant, but lets leave it as that for
now, to keep the KMS layer "below" the cross backend CRTC layer.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
In practice, for KMS backend CRTC's, we cache the gamma in the monitor
manager instance, so that anyone asking gets the pending or up to date
value, instead of the potentially not up to date value if one queries
after gamma was scheduled to be updated, and before it was actually
updated.
While this is true, lets still move the API to the MetaCrtc type; the
backend specific implementation can still look up cached values from the
MetaMonitorManager, but for users, it becomes less cumbersome to not
have to go via the monitor manager.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2165>
We created device profiles, that we manage the lifetime of in colord,
but color devices can be assigned profiles other than the ones it was
created for. For example, this can include the standard sRGB profile
provided by colord.
To achieve this, keep track of the default profile of the CdDevice as
the "assigned" color profile of the device. Given this profile
(CdProfile), construct a MetaColorProfile that can then be interacted
with as if it was generated by ourself.
The assigned profile (default profile in colord terms) does nothing
special so far, but will later be used to determine how to apply CRTC
gamma ramps etc.
The sRGB.icc file used in the tests was copied from colord. It was
stated in the repository that it has no known copyright restrictions.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2164>
This works similiarly to how MetaColorDevice works, by creating them
asynchronously then signalling the 'ready' signal when done. Also
similarly to MetaColorDevice, the on-demand sync cleanup on finalize is
added, to avoid race conditions when hotplugs happens very rapidly,
e.g. in tests.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2164>
Just as gsd-color does, generate color profiles. This can either be done
from EFI, if available and the color device is associated with a built
in panel, or from the EDID. If no source for a profile is found, none is
created.
The ICC profiles are also stored on disk so that they can be read by
e.g. colord. The on disk stored profiles will only be used for storing,
not reading the profiles, as the autogenerated ones will no matter what
always be loaded to verify the on disk profiles are up to date. If a on
disk profile is not, it will be replaced. This is so that fixes or
improvements to the profile generation will be made available despite
having run an older version earlier.
After generating, add some metadata about the generated file itself
needed by colord, i.e. file MD5 checksum and the file path.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2164>
Tests that test case EDID is setup correctly, and that color devices for
monitors are created.
tests/color: Add hotplugging tests
Checks that changing the number of connected monitors reflects the
number of current color devices, and that we end up with the correct end
state.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2164>
Ready means it has established the connection to colord and can operate.
Will be used by tests to make sure tests don't fail due to race
conditions when connecting to colord.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2164>
gsd-color provides this API, which exposes details about the night light
state. Currently, gsd-color also turns this state into CRTC gamma
changes, but this will eventually change, and this is a preparation for
this.
The proxy isn't yet used for anything.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2164>
Previously, gsd-color handled adding color devices. It got information
about those via the GnomeRR API, which is part of libgnome-desktop.
libgnome-desktop itself got this information from the
org.gnome.Mutter.DisplayConfig.GetResources() D-Bus method, implemented
by mutter.
Now, mutter itself will add all the monitor color devices itself,
without having to go via gsd-color.
We sometimes need to delete colord devices synchronously, in certain
race conditions when we add and remove devices very quickly (e.g. in
tests). However, we cannot use libcolord's 'sync' API variants, as it
has a nested takes-all main loop as a way to invoke the sync call. This
effectively means we end up sometimes not return from this function in a
timely manner, causing wierd issues.
Instead, create our own sync helper, that uses a separate context that
we temporarly push as the thread-default one.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2141>
It's not really about monitors, even though it is used for monitors.
Lets shrink MetaMonitorManager a bit moving it to the backend.
While at it, stop leaking it too.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2141>
What determines whether one MetaMonitor is the same as the other should
be whether the actual monitor is the same. The way to check this is
comparing the EDID vendor/product/serial fields. Whene these are
incomplete, fall back on the 'winsys ID'.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2141>
Same applies to MetaOutput. The reason for this is to make it possible
to more reliably know when there was EDID telling us about these
details. This will be used for colord integration.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2141>
As for the types of monitor, X11 and KMS are currently assumed to always be
physical, while the virtual ones are assumed to be virtual. In theory
X11 ones could be virtual, but lets not bother. KMS ones can be virtual
in the case of virtual KMS, but we typically use that for testing as if
it was physical, so lets leave it as such.
Will later be used to feed correct information to colord.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2141>
Create a color manager type that eventually will be the high level
manager of color related behavior, such as ICC profiles and
color "temperature" a.k.a. night light.
For now, it's only an empty shell. It's also constructed by the actual
backend, as at a later point, the X11 and native color management
implementations will differ.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2141>
Although its atomic KMS support seems to work at first, mode sets to
anything other than the Xilinx preferred max resolution of 2048x1280
would result in a hang. The xlnx kernel driver is given:
`DRM_MODE_ATOMIC_ALLOW_MODESET | DRM_MODE_PAGE_FLIP_EVENT`
and it does complete the mode set without error, but page flip events
never arrive and so you're frozen on the first frame.
Revert to legacy KMS which has no such problem with non-default modes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2596>
The "activate" and "deactivate" signals on ClutterStage are used by
Cally to track the key-focus when the user is interacting with shell UI.
key-focus only gets tracked while the stage is activated.
Wayland has no concept of the stage receiving focus or not, so right now
the activation state is bound to whether there's a focus_window in
meta_display_sync_wayland_input_focus(). Since display->focus_window is
set pretty much all the time, this effectively binds activation state to
whether the stage holds a grab or not. This is almost good enough, but
it misses cases where key-focus is on the stage without a grab, for
example when keyboard-navigating the panel after using Ctrl+Alt+Tab.
It seems to make more sense to bind the activation state to whether
key-focus is set to an actor or to NULL, so let's do that instead.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2329>
Since commit 1bf70334 "tests/runner: Make test runner use the headless
backend", tests are run with the native backend in headless mode, which
will attempt to open each GPU and show a warning (fatal during tests)
if it cannot.
However, in headless mode we might not be logged in on any seat (for
example we might be logged in via ssh instead), which means we might
legitimately not have permission to use any GPUs, even if they exist.
Downgrade the warning to a debug message in this case.
Resolves: https://gitlab.gnome.org/GNOME/mutter/-/issues/2381
Signed-off-by: Simon McVittie <smcv@debian.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2584>
This adds the 4 new connector types that mutter didn't know about from
drm_mode.h in the kernel.
Noticed because mutter kept crashing when plugging in a USB-C adapter to
use an external monitor.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2577>
When we e.g. generate switch configs (i.e. the ones from pressing the
Super+P or the switch-config key on laptops), try a bit harder to find a
"good" monitor scale.
With "good", it means pick a scale that was used in a previous
configuration. In practice, this means that if you for example have
configured your external monitor to use a specific scale, then pressed
e.g. "built in only", and then switched back to e.g. "external only" or
"linear", the generated configuration will use the scale that was
previously configured.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2479>
If two modes are roughly the same, they should probably use the same UI
scaling factor. I.e. for the same monitor, if a 4K mode was configured to
have a certain scaling factor, and we generate a new configuration with
a similar sized 4K mode, we should re-use the scale previously
configured; however if we e.g. go from a 4K mode to a FHD mode, we
shouldn't.
This allows implementing better hueristics when using the switch-config
feature, where we'd be less likely to loose the for a certain monitor
mode combination previously configured scaling factor.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2479>
This will eventually help with better hueristics for finding a good
scale. It currently doesn't change much, but the helper will later gain
more functionality that will also help when coming up with mirroring
configs.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2479>
The resulting logical monitor was eventually marked as primary anyway,
but without the config being marked as such, various primary properties
was not set e.g. the one on the MetaOutput. Also, tests would fail.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2479>
This will allow tests to change monitor resolution. The first argument
is the monitor ID; there is always one monitor added by default, and it
has the id 0. It's currently not possible to add more monitors, so
passing '0' is the only valid way to resize monitors.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2554>
This allows the GL fallback path to correctly paint the cursor
if clients pre-rotated the buffer using
`wl_surface::set_buffer_transform`, visually matching the
hardware cursor path.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/344>
When taking the scanout path we still want to clear the
redraw-clip from the stage-view in order to ensure we skip
frames in `handle_frame_clock_frame()` if no new redraw-clip
was recorded.
This was not done previously as the accumulated redraw-clip was
needed for the next repaint, likely under the assumption that
scheduling a scanout repeatedly would be computationally cost-free.
This assumption does not hold in a VRR world.
In order to archive both, an accumulated redraw-clip for the next
paint and frame-skipping during scanout, introduce new API to defer
and accumulate redraw-clips until the next repaint.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2480>
We disable modifiers for two reasons: an udev rule saying so, or the
lack of a working drmModeAddFB2(). However, to the users, this is not
granular enough. While the current user, whether to enable modifiers in
MetaRendererNative, doesn't need more granularity, we want to send
modifiers to Wayland clients even if the onscreen framebuffers should
still be allocated without modifiers.
Prepare for differentiating between how Wayland DMA buffers work and how
onscreen buffer allocation work by separating the relevant device flags.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2546>
This one does proper error reporting. Via Javascript, barriers are
constructed directly via GObject construction, which currently can't
handle error reporting, but when calling from C we can. However, if we
initialize using GInitable, and use that in our constructor method, once
gjs gains support for construction using GInitable, including the error
reporting, we'll automatically get proper error reporting to Javascript.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2442>
Prior to this commit, barriers were created with a MetaDisplay pointer,
despite being entities related and owned by the backend. In the X11
case, it was also not hooked up to the backend X11 connection, but the
clutter one, meaning for example that the logic was active (but dormant)
also for the Xwayland connection.
Fix this by moving X11 barrier management and event processing fully to
the backend. Also replace passing a display pointer with passing a
backend pointer. Keep the display pointer around for a release, but mark
it as deprecated.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2442>
It papered over wrong `meta_rectangle_transform()` behaviour for
non-flipped output transforms. Also there is no obvious reason
why we would need inverted values here.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2459>
- Drop bogus `meta_monitor_transform_invert()`. It papered over
wrong `meta_rectangle_transform()` behaviour for non-flipped
output transforms.
- Update `scale_and_transform_cursor_sprite_cpu` to match the GL
pipeline matrix in `MetaShapedTexture`, fixing several of the
flipped cases. Note: the rotation applied is the one a client would
need to apply to the buffer for a given monitor transform.
- While on it, drop a redundant `return`.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2459>
The following implicit definition for `transform()` did not
correctly apply:
```
a * b = c
c * invert(b) = a
```
Crucially the following did not apply for `FLIPPED-90`
and `FLIPPED-270`:
```
a * invert(a) = identity
```
Fix this by applying the operations, first the flip, then the
rotation, in this order and add tests to ensure correct results
for the requirement above.
Also drop `relative_transform()` as it only had a single user and
can be replaced by `transform()`:
```
invert(a) * b = c
a * c = b
```
As this is not very intuitive, ensure in tests as well.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2459>
Checking for both bits at once means only one matching bit is
sufficient - very likely in case of `rotate-0'.
This fixes crashes on hardware that does not support 'reflect-'
bits when setting a flipped output transform.
While on it, also update the check for `reflect-y` instead of
`reflect-x` + `rotate-180`. They are logically equivalent,
however some hardware may support `reflect-y` but not both
other bits.
Fixes commit 4e3f3842a1
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2459>
We started to report resource changes using prediction when an update
had been successfully committed. While at it, gamma changes were
reported too, but this was problematic, as gsd-color will listen for the
MonitorsChanged D-Bus signal and naively set the gamma again, even if it
didn't change. There aren't currently any actual use cases for being
told when gamma changes from a prediction, so just ignore it and just
report privacy screen changes.
This avoids a feedback loop between mutter and gsd-color.
Fixes: 81b28a1d97
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2531>
When we change the privacy screen, we added a result listener to the KMS
update object to notify the upper layer about the privacy screen state
change. This was slightly awkward as one might have changed the state
multiple times for a single update, thus it was necessary to remove any
old result listeners to an update before adding a new one.
Doing this will not be possible when updates are fully async and managed
by the KMS impl device.
To handle this, instead make the post-commit prediction notify about
changes that happens in response to a successfully committed update. We
already predicted the new privacy screen state, so the necessary change
was to plumb the actual change into a callback which emits the signal if
there actually was a privacy screen change.
This will then be communicated via the same signal listener that already
listens to the 'resources-changed' signal.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2340>
The name had a bit conceptual conflicts with MetaKmsUpdate, as it shared
its namespace but had no relation to it. Fix this by renaming it
MetaKmsResourceChanges (and the corresponding META_KMS_UPDATE_CHANGE_*
to META_KMS_RESOURCE_CHANGE_*). The term "resource" is used since that's
already used in the signal, and the fact that the changes partly comes
from changes in the DRM resource as retrieved by drmModeGetResources.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2340>
With this header we can set a flag to signal that the whole buffer is
corrupt and should be ignored. With this we can cater to all cases:
* Window buffer fine, but cursor broken:
Use the spa_meta_cursor properties like id or offset accordingly
* Window buffer broken, but cursor fine:
Use the chunk flags
* Both are broken / the dequeued buffer is not usable
Use the spa_meta_header flag
Additionally clients can now check if a buffer contains spa_meta_header
data and can thus only check for the new or the old behaviour.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2516>
Since the commit below, meta_crtc_kms_get_cursor_renderer_private has
returned a CrtcCursorData pointer, but this code was still treating it
as a MetaDrmBuffer pointer.
Fixes: fea8ebcca9 ("cursor-renderer/native: Store struct in CRTC private")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2524>
PipeWire supports flags to signal a corrupted buffer. We should use the
flag SPA_CHUNK_FLAG_CORRUPTED for `chunk->flags` instead of setting
`chunk->size = 0` since the size isn't well defined for arbitrary dmabufs
and should be set to 0.
Sadly clients like obs are using a chunk size of 0 to decide if a buffer
should be imported. Thus we should offer both until clients are using
the flag.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2323>
Change meta_seat_impl_notify_discrete_scroll_in_impl to receive 120
based values and report high-resolution scroll values as smooth scroll.
Notify discrete scroll only when the accumulated value reach 120.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1962>
In order to get the delta X/Y value of the
LIBINPUT_EVENT_POINTER_SCROLL_FINGER
or LIBINPUT_EVENT_POINTER_SCROLL_CONTINUOUS events the new function
libinput_event_pointer_get_scroll_value should be used instead of
libinput_event_pointer_get_axis_value.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1962>
Ignore deprecated LIBINPUT_EVENT_POINTER_AXIS events and handle
LIBINPUT_EVENT_POINTER_SCROLL_WHEEL,
LIBINPUT_EVENT_POINTER_SCROLL_FINGER and
LIBINPUT_EVENT_POINTER_SCROLL_CONTINUOUS instead.
The scroll source is now encoded in the event type making
libinput_event_pointer_get_axis_source and translate_scroll_source
redundant.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1962>
This adds support for E-EDID extensions. Tags are allocated by VESA and
the CTA has such an extension defined in CTA-861.
The switch in `decode_ext_cta` is empty in this commit because we don't
parse any CTA-861 data blocks, yet.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2351>
The EDID code is copy from elsewhere, without adapting to conventions
regarding e.g. API and types. Clean this up a bit, as EDID information
will be kept around longer when possible, to be used e.g. by color
management.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2351>
The pixel clock determines how fast pixels can be processed. When adding
non-native common modes, avoid adding modes that exceed the max pixel
clock frequency of the native modes. Avoiding these avoids potential
mode setting failures where the GPU can't handle the modeline since the
configured pixel clock is too fast. This replaces the "bandwidth" check
which used the number of pixels and refresh rate, which wasn't enough to
avoid incompatible modes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2492>
'screen-cast/monitor-src: Use clutter_stage_paint_to_buffer'
(6c818cd8d5) made the non-dma-buf path use
clutter_stage_paint_to_buffer() to avoid running into direct scanout
issues. At a glance, the dma-buf paths didn't have the same issue since
it explicitly handled dma-bufs by blitting them.
What it also did was move the recording to an idle callback, to avoid
paint reentry issues. A side effect of this, however, is that it also
broke the dma-buf paths, as they rely on the back buffer existing, and
the stage view direct scanout already being setup, which it isn't in an
idle callback.
Fix this by using the dma-buf variant of
clutter_stage_paint_to_buffer(): clutter_stage_paint_to_framebuffer().
This has some negative performance impact, but we can't use
cogl_blit_framebuffer() when using an idle callback for recording.
Potential performance improvements to make things work more as they did
before is to enhance 'cogl_blit_framebuffer()' a bit, making it a vfunc
that could be implemented by MetaOnscreenNative. A flag to say whether
to look at the back or front buffer would let MetaOnscreenNative know
whether to use the already committed-to-KMS buffer, or the current back
buffer.
Fixes: 6c818cd8d5
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2282
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2462>
The MetaKeyboardA11yFlags are used by gnome-shell to show a dialog
whenever a keyboard accessibility feature is switched using the
keyboard.
Unfortunately, commit c3acaeb25 renamed the Clutter flag to Meta and
moved them to a private header. As a result, gnome-shell do not show any
dialog anymore when a keyboard accessibility feature is activated.
Move the MetaKeyboardA11yFlags definition to a public header so that
gnome-shell can use it.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2306
Fixes: c3acaeb25 - backends: Move keyboard a11y into backends
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2463>
The min distance to the right/bottom edge depends on Wayland concepts
(wl_fixed_t) and eventually geometry scale. Move the logic the Wayland
side of the pointer constraints machinery to avoid the backend trying to
figure this out without the proper data.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2460>
There were some coordinate nudging to avoid running into Clutter
floating point math issues related to coordinate transformations. Over
the years these things have improved, especially with the move to
graphene, so remove the old work around.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2460>
The ImplDeviceAtomic converts the MetaKmsPlaneRotation back to the
concrete KMS value. The MetaMonitorTransform is always directly
converted to a MetaKmsPlaneRotation.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2379>
Updating the PropTable has the side effect that the parse callback now
also gets called on hotplug but it is used to initialize data. The parse
callbacks are moved to the read_state functions which are aware if this
is an initializing call or just an update.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2379>
We don't make use of the refresh rate in any useful way in the X11, and
in this case we just ended up with warnings since the refresh rate was
NaN. Fix this by making it 0.0 to mean "no refresh rate". This also is
what 'xrandr' itself reports.
Fixes warnings when launching 'mutter --x11' in Xvfb.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2434>
This adds a minimalistic fullscreen direct scanout test case, that runs
on vkms. It doesn't use EGL, and it uses uninitialized memory, thus it
lacks any kind of implicit synchronization, but it does test that the
scanout selection paths are working.
What is tested is:
* DMA buffer allocated using gbm on top of VKMS
* Buffer passes a mode setting TEST_ONLY check
* Paint is omitted
* Correct buffer active in KMS after presentation
What isn't yet tested:
* Implicit synchronization related behavior
* Presented pixel content
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2417>
The property doesn't necessarily exist when using drivers that doesn't
support atomic mode setting, and the way it worked will break night
light and other gamma related features. This makes things use the gamma
length; if it is higher than 0, it definitely supports it one way or the
other, i.e. GAMMA_LUT with the atomic backend, and drmModeCrtcSetGamma()
with the legacy/simple backend.
Fixes: 364572b95c
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2287
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2435>
It doesn't depend on whether the CRTC is active or not, so always read
it. This is also useful to know whether a CRTC supports gamma, before it
is being turned on, without relying on the existance of properties.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2435>
Mutter makes use of a gsettings scheme that comes from
gnome-settings-daemon to check for the screen orientation.
In use cases where gnome-settings-daemon is not available,
this would lead to a crash as the key doesn't exists
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2398>
The monitors settings such as the privacy screen property is propagated
to the monitors via kms updates, however during initialization and
on monitors changes, we end up clearing the pending KMS updates because
such settings are added to the queue before the backend has fully
initialized the monitors, and this may lead to discarding all the
pending updates, including the one we've just planned.
To avoid this, move settings applications after we've both initialized
the backend and notified it about changes.
Also avoid to try set the settings during actual initialization, but
delay that after post-init.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2372>
'kms/impl-device/simple: Get the buffer handle from MetaDrmBuffer'
changed how fb ids are generated, but it only made it fully work with
atomic mode setting. For legacy/simple mode setting, it only handled the
primary plane buffer, not the hardware cursor.
Fix this by making sure the fb id is generated also in the legacy mode
setting case.
Fixes: ea39142da2
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2250
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2397>
With the unthrottled input emission, we ended up often getting the
cursor updates long before any damage had been posted, meaning that if
you moved around the mouse pointer where the mouse had a high enough
refresh rate, we'd effectively stall the screen cast stream by only
sending cursor updates and nothing else.
Fix this by scheduling an update when we get a cursor update, then
sending a cursor-only frame after any damage and relayout has been
processed, but only if there is no queued damage that will cause an
actual repaint.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2393>
This handle is used by the legacy KMS API; lets avoid having to have GBM
specific code where this is done by letting the MetaDrmBuffer API, that
already has this information, expose it.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2275>
DMA buffers might be allocatable, but it doesn't mean the driver doesn't
fail when we try to allocate a buffer with an implicit modifier. Using
the proprietary NVIDIA driver for example, it will fail. Lets catch this
up front and avoid advertising DMA buffer support when we know it won't
work.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2383>
MetaCursorRendererNative only updates the cursor state when the
underlying texture changes. The cursor scale and transform do not
trigger updates. This results in wrong cursor orientations on rotated
displays. Use both texture changes and scale and transformation changes
to figure out when to update the cursor state.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2363>
We rather confusingly still call a secondary display card that is
GPU-less (DisplayLink or other basic KMS device) a "secondary GPU",
so just because secondary_gpu_state is non-NULL doesn't mean we
can use it for rendering. The clearest indication of this is when
there is no EGL surface.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2341>
Since devices may be multiple things now, check all capabilities in order
to ensure all aspects of the device are correctly configured.
This change does the following observations:
- Devices that have TOUCHPAD | POINTER capabilities prefer the 'touchpad'
settings path. The regular pointer settings path is left for all
non-touchpads.
- Devices that are both a tablet and a touchscreen prefer the tablet
relocatable schema. This works for both aspects as the touchscreen
schema is a subset of the tablet one.
Other than that it's a rather boring, even if verbose search and replace.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2331>
We do not need to open code the ClutterInputDeviceType fetching from a
libinput_device, since we already created a native ClutterInputDevice that
has the right type.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2331>
If the remote desktop service emits absolute input events (e.g. absolute
pointer events) before the stream has started streaming, we don't have a
virtual monitor, as the size has not been negotiated yet. When this
happens, just drop the event. Remote desktop services should probably
make sure not to send events before the streaming has started, but them
doing so anyway shouldn't trigger a crash, which would be the case
otherwise.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2270>
Keep the virtual monitor around if it's being resized. This reduces the
number of unnecessary object rebuilding that happen during monitor
rebuilding.
This changes finalize() vfunc into a dispose() vfunc in the abstract
stream source object implementation, as it needs the abstract stream
source object to close the stream early, so that various signal
listeners get disconnected early.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1904
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2270>
We'll change mode's on-demand so using IDs identical to the virtual
monitor ID would mean IDs didn't change when changing mode, and that is
rather unintuitive. IDs don't mean much anyhow, just make them grow
within the realm of a 63 bit unsigned integer, as the 64th bit means its
a virtual mode ID. Making sure the ID is in the virtual mode namespace
is handled by meta_crtc_mode_virtual_new().
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2270>
This implements the new 'bounds' event that is part of the xdg_toplevel
interface in the xdg-shell protocol. It aims to let clients create
"good" default window sizes that depends on e.g. the resolution of the
monitor the window will be mapped on, whether there are panels taking up
space, and things like that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2167>
gnome-desktop is used to retrieve the monitor vendor name which in some
use cases is not needed as it brings a bunch of gnome-desktop unwanted
dependencies.
The change makes mutter fallback to an "Undefined" vendor name if it is
built without gnome-desktop
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2317>
Return in meta_egl_choose_all_configs() the actual number of
configurations returned by eglChooseConfig(), which are not
necessarily the same number as those from eglGetConfigs().
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2303>
Since the introduction of ClutterGrabs, MetaDnd now no longer gets
notified about input events on the stage during grabs (for example while
the alt-tab popup is shown) and thus can't move the grab feedback actor
anymore.
To fix this, forward events to MetaDnD directly from
meta_display_handle_event() when a ClutterGrab is in effect.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2308>
It passes a MetaLogicalMonitor, which isn't introspected right now, so
skip it completely. The entry point to the UI is handled via
MetaDisplay, so it isn't needed.
This fixes the following warning:
<unknown>:: Warning: Meta: (Signal)monitor-privacy-screen-changed: argument object: Unresolved type: 'MetaLogicalMonitor'
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2287>
We update some details like the last used device and pointer visibility
from events, but this is done inconsistently on X11 since the
ClutterEvents are created and pushed from an additional place.
Make these updates happen on a private call, that will be called from
these places in X11.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/285>
Even though it's great that XI2 has an event to notify about device
changes, this is something we can let the MetaBackend code handle
consistently for all backends, since looking for the source device
works everywhere.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/285>
Instead of relying in the device being updated from different parts of our
machinery for different backends, hook this up to our own event dispatching.
This will allow dropping all other places where this is done.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/285>
We create a cursor renderer per device for those at
meta_seat_native_handle_event_post() with PROXIMITY_IN events, but
the MetaWaylandTabletTool handles the event before that, and goes
with a NULL cursor renderer.
Make MetaBackend::get_cursor_renderer() on the native backend create
those cursor renderers on demand, and only handle PROXIMITY_OUT in
handle_event_post() to dispose those. This makes MetaWaylandTabletTool
happily get a cursor renderer again.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/285>
We now only enable DMA buffer based PipeWire screen casting if a
format/modifier has been negotiated. This practically means a consumer
is aware about what is needed, and we should not try to predict that it
uses the DMA buffer the right way (i.e. not mmap:ing directly).
However, in case we're not hardware accelerated, we never want to
attempt to use DMA buffer screen sharing, as we want to avoid
compositing into a DMA buffer on such hardware as doing so can be very
slow.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2086>
When handling lid state, we used to update the idle time right after
opening the lid. This behavior changed in commit 14b6c8780d due
to a typo/thinko, "if (lid_is_closed)" used to be an early return
condition before updating idle time, now it only updates in that
case.
Restore the original behavior, since this idle time update is key
in having gsd-power light up the display again, this presumably
fixes situations that required extra "light up" hints after suspend.
What it does surely fix is "ninja test" in g-s-d against recent
mutter, since the behavioral change induced a test timeout there.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2272>
Add some debug logging that allows checking whether we're using DMA
buffers for screencasting or system memory buffers. This can be useful
for debugging screencasting performance and CPU usage.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2256>
With the ability to query the renderer for DMA-BUF support we can
announce support for implicit modifiers. This allows PipeWire to check
for matching modifiers while negotiation.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1939>
Returns TRUE if the active renderer backend can allocate DMA buffers.
This is the case hardware accelerated GBM backends, but FALSE for
surfaceless (i.e. no render node) and EGLDevice (legacy NVIDIA paths).
While software based gbm devices can allocate DMA buffers, we don't want
to allocate them for offscreen rendering, as we really only use these
for inter process transfers, and as buffers allocated for scanout
doesn't use the relevant API, making it return FALSE for these solves
that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1939>
Because both code paths require the existence of `GL_TIMESTAMP[_EXT]`
which is only guaranteed if `ARB_timer_query` (included in GL core 3.3)
is implemented.
We know when that is true because `context->glGenQueries` and
`context->glQueryCounter` are non-NULL. So that is the minimum
requirement for any use of `GL_TIMESTAMP`, even when it is used in
`glGetInteger64v`.
Until now, Raspberry Pi (OpenGL 2.1) would find a working implementation
of `glGetInteger64v` but failed to check whether the driver understands
`GL_TIMESTAMP` (it doesn't).
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2107
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2253>
Adding a <dbus/> element containing a boolean (yes/no) determines
whether org.gnome.Mutter.DisplayConfig ApplyMonitorsConfig will be
callable. The state is also introspectable via the
ApplyMonitorsConfigAllowed property on the same interface.
For example
<monitors version="2">
<policy>
<dbus>no</dbus>
</policy>
</monitors>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2030>
This adds a way to define a way, at the system level, to define a policy
of how monitor configuration files are loaded.
The intended use case is to e.g. either prefer system level monitor
configurations before user levels, or only allow system level
configurations.
Examples:
Prefer system over user level configurations:
<monitors version="2">
<policy>
<stores>
<store>system</store>
<store>user</store>
</stores>
</policy>
<configuration>
...
</configuration>
</monitors>
Only allow system level configurations:
<monitors version="2">
<policy>
<stores>
<store>system</store>
</stores>
</policy>
<configuration>
...
</configuration>
</monitors>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2030>
strncmp() always return 0 if the passed length is 0. What this means is
that whatever the first string check happens to be, if the parsed XML
cdata was empty (e.g. if we got <element></element>), the first
condition would evaluate to true, which is rather unexpected.
Fix this by making sure the string length is correct first. Also move it
into a helper so we don't need to repeat the same strlen() check every
time.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2030>
