Add a dialog that is used in a following patch, to ask user if they want
a requesting application to gain access to their location.
Co-author: Florian Müllner <fmuellner@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=762119
We lost media controls outside of notification banners when
implementing the new notification designs. Reimplement this
functionality as a dedicated "Media" section in the message
list based on MPRIS.
https://bugzilla.gnome.org/show_bug.cgi?id=756491
It is not always possible to determine the type of audio device that
got plugged in. Add a system modal dialog to query the user in that
case and export in on the bus to gnome-settings-daemon.
https://bugzilla.gnome.org/show_bug.cgi?id=760284
We can autodetect what to do based on the user's session, so drop
the separate desktop files.
This, along with some future changes, will enable us to be bus
activatable.
https://bugzilla.gnome.org/show_bug.cgi?id=741666
If we detected that Bluetooth devices were setup, show the Bluetooth
menu so that users can easily turn Bluetooth back on.
This is a bit of a hack, as we cannot detect whether there is a
Bluetooth adapter at all when it's disabled, so we cannot tell whether
there were any Bluetooth devices setup, at some point. This state is
saved in the gnome-shell GSettings in the had-bluetooth-devices-setup
key.
Checking whether we saw Bluetooth devices at one point is a good
enough guess of whether there will be some in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=723848
For menus, it makes more sense to pick a width that fits a reasonable amount
of content rather than a fixed amount of screen estate, so use font-relative
sizes instead of pixel values.
https://bugzilla.gnome.org/show_bug.cgi?id=754581
Some labels in the system status menu - namely network names - are out
of our control, and may thus grow the width "infinitively" unless we
restrict the menu width. So far we have been doing this by setting a
fixed width or max-width, but any value we put there might end up
being too restrictive in some locales. Instead, request a width that
fits all the labels we want to show unellipsized and use that instead
of an arbitrary limit.
https://bugzilla.gnome.org/show_bug.cgi?id=708472
The code previously tried to stop spinner after it was hidden, but
due to an incorrect check was only stoppig it after it was shown.
Also, it was only stopping after hiding due to an animation, and
failing to stop it in the non-animated case.
This left the spinner hidden and running while VT switched away
from the login screen, only stopping when the auth prompt was
reset when switching back.
https://bugzilla.gnome.org/show_bug.cgi?id=753891
* switch to a one-column layout (and adjust strings/widths
accordingly
* remove separator before system menu
* add link to account settings to user submenu for consistency
https://bugzilla.gnome.org/show_bug.cgi?id=751377
Follow the design we have in gtk+ for buttons dialogs,
which are at the bottom and they expand full width, having
the same amount of space for each one.
Also, since this removes any space for non-button widgets
in the button area, move the spinner present in the auth prompt
dialog next to the password entry.
https://bugzilla.gnome.org/show_bug.cgi?id=746108
We now stopped using notification actors directly for anything, so
we can simplify the Notification class significantly by turning it
into a purely informational object others can use to built their UI
representation from.
https://bugzilla.gnome.org/show_bug.cgi?id=746343
Since we stopped special-casing chat notifications to use the old
notification actor, we need to provide a notification banner to
maintain the inline chat functionality, so split out the UI from
the existing ChatNotification class.
https://bugzilla.gnome.org/show_bug.cgi?id=746343
The .selected style class indicates the "active" menu item, which
is generally the last hovered or focused one (whichever happened
last). Styling that instead of :focus and :hover directly guarantees
that only a single item will be selected at a time, which removes
ambiguity and matches the behavior of GTK+ menus.
https://bugzilla.gnome.org/show_bug.cgi?id=745246
Commit 5a8923ef95 removed support for legacy status icons from
the notification system, as we no longer want them to appear as
notifications. As we are unfortunately not quite at a point where
we can remove all support for them for good, so we now need an
alternative place to put them. Add a small dedicated tray at the
bottom which appears when any legacy status icons are active. By
default it is almost completely hidden to not interfere with the
user's windows, but can be expanded on demand to interact with
the icons.
https://bugzilla.gnome.org/show_bug.cgi?id=745162
With the message tray no longer being a distinctive UI element,
the existing <super>m shortcut for viewing the notification list
is no longer mnemonic. It is also less convenient as it requires
both hands with most keyboards. So make <super>v the new default
to _view_ notifications, which matches the corresponding Windows
default.
The previous default is kept as secondary shortcut to ease the
transition.
https://bugzilla.gnome.org/show_bug.cgi?id=687986
GNOME Shell throws the following warning message:
'St-WARNING **: Too many values for border-radius property.'
Was fixed with just remove the last '0' on the 'border-radius'
property in the '.tile-preview-left.on-primary' class on both files:
gnome-shell.css and gnome-shell-high-contrast.css.
https://bugzilla.gnome.org/show_bug.cgi?id=744900
We no longer have a single notification actor that is either displayed
as banner or reparented to the summary depending on state - both the
lock screen and the notification section of the message list create
their own UI based on the information attached to the notification
object. Adding to this that different representations of a notification
may now exist simultaneously (as they are included in the message list
immediately rather than after the banner has been displayed), it no
longer makes sense to keep the banner actor in the notification itself.
Add a new NotificationBanner class that provides a separate banner
implementation based on the message list's NotificationMessage that will
soon replace the existing notification banners.
The message tray is now empty and about to be removed, so an indication
at the bottom edge of the overview becomes an odd location to convey the
status of the summary. We will eventually display an indication in the
top bar that unseen messages are available, for now just remove the
existing indicator.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
The notification list in the calendar drop-down now functions as summary
area, so we can drop it from the message tray and remove a lot of complexity
from the state machine.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
Display notifications that have not been dismissed in the message
list - eventually this will replace the existing message tray summary.
Notification messages show icon, title and one line of the body and
can be clicked to activate the default action. However they cannot be
expanded, so other actions or the full body text are not accessible
in this mode.
https://bugzilla.gnome.org/show_bug.cgi?id=744817
Turn the existing EventsList into a MessageListSection and add the
message list to the calendar drop-down. The new events list only
displays events for the currently selected day, but in a more
structured and friendlier way than the old one.
https://bugzilla.gnome.org/show_bug.cgi?id=744817
The message list is a scrollable list that will hold sections of
different types of time-related messages like notifications,
calendar events or birthday reminders. When no section displays
any content for the selected date, a placeholder is shown instead.
https://bugzilla.gnome.org/show_bug.cgi?id=744817
The new design has the events list on the left and the calendar on the
right, so swap them around and remove the vertical separator between
them in favor of some additional whitespace as in the mockups.
https://bugzilla.gnome.org/show_bug.cgi?id=744817
The sass sources now live in a project in GNOME, so they can
be used in multiple projects like gnome-shell-extensions.
Because of that, add gnome-shell-sass as a submodule of gnome-shell
and remove the sass sources from the theme directory.
This used to be the style-class for status icons (i.e. icon-only
top bar items). It got unused a while ago when the class used
by status icons stopped using it - except for the keyboard indicator,
which set the class manually to appear as status icon despite not
being a real icon.
Now that the button highlight is provided by the .panel-button class
on a parent, the obsolete class results in a double border on the
keyboard indicator when active - just drop it from there as well
to fix.
- the goal is to have the items activate even on the edge
sadly this Fitzsiness is only working on the app vault icon
at the bottom, not the regular icons so far.
So we can style it differently than :hover.
We already have a active state for the menu items which includes
more than hover. For example, when the keyboard focus moves to a item
or we select programatically a item.
For this reason we need a style class named active for the meaning we
give to it in menu items, and a pseudo class active with the meaning
CSS has.
https://bugzilla.gnome.org/show_bug.cgi?id=744680
Since widnows decorations with round corners has a special shape,
which when scaled we can't match with a simple border-radius.
So to prevent to show a gap between the caption border and the
caption itself, apply a shadow.
- separator seems to have a semi-opaque top that interfers
with the bottom row of teh calendar
- current day can't have a blue brder on the bottom,
but $borders_color on the sides. Apparently cannot
use non-uniform border colors.
- month pager missing
Currently we animate in both sides, hover on and hover off, and with
200ms. The downside of that it that it feels sluggish when passing with
the mouse hovering few items because the on transition is slow.
Match what gtk did for fix this for list rows hover state at
commit 52e91f1f74ecb943d, animating only on off hover. However,
gnome-shell doesn't support different kind of transitions for its css,
that will be lovely to have a easeOutQuad as well here.
When opening a panel menu, we set it's max-height to the available
work-area height to keep menus with scrollable content from growing
outside the monitor. However a menu that extends all the way down
to the bottom edge does not look great either, so also take margins
into account here.
https://bugzilla.gnome.org/show_bug.cgi?id=744498
This DBus API is intended to be used by gnome-control-center's
displays panel to show monitor labels.
Each output (i.e. hardware monitor) identified by its
org.gnome.Mutter.DisplayConfig API ID has at most one label. On
mirrored setups, all the labels for outputs corresponding to the same
logical monitor (i.e. showing the same contents in the same mode) are
shown together.
At most, only one DBus client at a time is allowed to show labels.
https://bugzilla.gnome.org/show_bug.cgi?id=743744
The login screen supports showing a banner message which admins
can use to mention login rules or disclaimers.
This message only shows up currently if the user list is enabled.
Most people who want to show a banner message also want to disable
the user list.
This commit moves the banner message to display when the user is
prompted for login credentials instead of when showing the user
list. It also adds a scrollbar if the message is too long.
https://bugzilla.gnome.org/show_bug.cgi?id=703972
A small dark gap was caused by the rounded window edges not meeting the
sharp corner of the CSS border on hover. By adding a small inset
box-shadow, this gap is filled in.
https://bugzilla.gnome.org/show_bug.cgi?id=699044
Currently, multi-day events are shown as individual appointments on each
day. This patch ellipsizes multi-day events to indicate continuation on
the prior or following day (or other time-period.)
The time label spot is now replaced by a box layout that contains the
prefix ellipsis label, the time label and the postfix ellipsis label.
In order to keep the alignment, ellipses are merely invisible (zero
opacity) when hidden.
The ellipses are styled using the events-day-time-ellipses class which,
by default, take the color of the event text.
When RTL is used, the box contents are adjusted accordingly (clutter
does that for us).
An event spanning three days now displays "...All Day..." in the
calendar on the second day.
https://bugzilla.gnome.org/show_bug.cgi?id=727302
Currently the app well menu has unrestricted with which can cause it to grow
with long window titles and can even go offscreen that way.
So set a max size, long titles will now be properly elipised.
https://bugzilla.gnome.org/show_bug.cgi?id=738054
Performance testing was producing inconsistent values at different
times in the day since the GNOME default background is animated and
sometimes has a single layer, and sometimes two blended layers.
So we have consistent numbers, install a simple animated background
with GNOME Shell that has 40-year long transition ending in 2030,a
and set an environment variable in gnome-shell-perf-tool so that the
background is override with that background. (The background depends
on files installed by gnome-backgrounds; we assume that the person
running performance tests is doing so within the scope of a full
GNOME install.)
https://bugzilla.gnome.org/show_bug.cgi?id=734610
Since these settings are now going to be accessed by
gnome-control-center as well, its more appropriate for them to live in
gsettings-desktop-schemas.
https://bugzilla.gnome.org/show_bug.cgi?id=734483
Having the on/off setting be backed by a boolean in dconf makes sense
anyway but this is mainly to be able to remember the max accuracy set
before user disabled geolocation so that when they enable it next time,
we have the max accuracy level on same value as before.
There hasn't been a real need for this but now we are about to add
geolocation settings in control center and it'll be easiser for
control-center to simply toggle a boolean property rather than to have
to know about and deal with accuracy levels.
Later we might also want to add accuracy level settings to privacy panel
so keeping the accuracy level setting around still. However we no longer
support 'off' accuracy level as the new boolean property covers that.
This also implies that we no longer track available accuracy level,
which made the code a bit hard to follow/maintain.
https://bugzilla.gnome.org/show_bug.cgi?id=734483
Support was added to Mutter to allow it to trigger a restart
to allow for restarts when switching in or out of stereo mode.
Hook up to the new signals on MetaDisplay to show the restart
message and reexec. Meta.is_restart() is used to suppress
the startup animation.
This also allows us to do 'Alt-F2 r' restarts more cleanly
without a visual flash and animation.
https://bugzilla.gnome.org/show_bug.cgi?id=733026
Add a small DBus-activated GtkApplication that embeds a WebKitWebView
and implements some minimal logic to see if the login succeeds.
It will try to connect to a custom NM-provided url (the portal login
page), if one exists, or to www.gnome.org in the normal case of
a portal doing redirect.
https://bugzilla.gnome.org/show_bug.cgi?id=704416
Some entries have untranslatable descriptions/summaries. This means that
when running dconf-editor, some entries will get a translated descriptions,
and a few will not.
https://bugzilla.gnome.org/show_bug.cgi?id=728170
We don't make use of any functionality StTable provides over
ClutterTableLayout, so port all users to the Clutter layout
in order to remove our own copy of the code.
https://bugzilla.gnome.org/show_bug.cgi?id=703833
The fallback app-menu in GTK+'s client side decorations obviously
uses the GTK+ theme rather than the shell one; update the style
of our own fallback app-menu to resemble that style.
https://bugzilla.gnome.org/show_bug.cgi?id=730752
With the switch to a table layout in commit f959cafb36, setting
alignments to place the individual icons at the outer edge of the grid
stopped working. Remove that code and add some explicit spacing instead.
https://bugzilla.gnome.org/show_bug.cgi?id=726323
Once you start navigating between months, you can't return to the
current day. However, the current day is always displayed above the
calendar grid. Fix this by making the current date clickable; when
clicked, the calendar grid jumps back to that day.
https://bugzilla.gnome.org/show_bug.cgi?id=641366
Interrupting update installation can mess up the package database quite
a bit and could lead to totally destroying the distro installtion. To
avoid running out of juice during an upgrade, warn when someone tries to
install updates on battery power.
https://bugzilla.gnome.org/show_bug.cgi?id=722898
This adds a checkbox for installing software updates to the shut down
dialog. The implementation relies on an already prepared offline update
and uses PackageKit's pk-trigger-offline-update helper to trigger the
installation.
https://bugzilla.gnome.org/show_bug.cgi?id=722898
Add a key 'disable-extension-version-validation' key that disables
the validation of extension's claimed to be supported shell version
with the shell version and just load all extensions unconditionally.
https://bugzilla.gnome.org/show_bug.cgi?id=724683
Until now the arrows were the associated arrow
character of the font. This cause some problems like
different arrows for different fonts, and size can be
altered because of the font size.
To solve that, use an image for the arrows.
https://bugzilla.gnome.org/show_bug.cgi?id=720206
Instead of relying on geoclue to store this user configuration, lets
keep it in gsettings. Geoclue is a system service and therefore is not
the appropriate entity to keep this info.
https://bugzilla.gnome.org/show_bug.cgi?id=723684
Rather than just showing "No networks", inform the user if airplane
mode is on or if wifi is off, and allow the user to change that
from the dialog (if possible).
https://bugzilla.gnome.org/show_bug.cgi?id=709128
Background menu shown on right clicking desktop background has an arrow
pointer which points to nothing. This patch sets its height (rise) to 0
so that no arrow is formed.
https://bugzilla.gnome.org/show_bug.cgi?id=699608
Rather than GMenu / app-folder-categories. This removes our last use of
gnome-menus in the stock gnome-shell, which is exciting, but also means
that app folders in Software start working.
Ideally, we'd have a button to launch our Software app as well from the
overview.
https://bugzilla.gnome.org/show_bug.cgi?id=722117
It's been broken for quite a bit since we removed Panel.Animation,
and hasn't really ever worked with our new search results. It's also
the only non-remote provider left.
Maybe we'll add it back as a remote provider later, but for now, just
ditch it.
Their use blocks activation of the default button by keyboard, which
is important for accessibility. Use a Clutter.ClickAction instead,
which doesn't have this problem as it only considers mouse events.
https://bugzilla.gnome.org/show_bug.cgi?id=710144
The application picker will always open with the view that was last
selected during the session, but the selection is reset on each
restart. This results in some annoyance for users that use the
ALL view exclusively, as they have to toggle views once each
session - the same would apply to exclusive FREQUENT view users
were the defaults to be changed, so the best solution is to simply
make the selected view persistent by storing it in GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=710042
The _background hack was added because the old way the zooming animation
worked, it set the allocation of the workspaces view and thumbnails box
to the final position and used animations to smoothly animate.
During the 3.6 cycle when we added the new search view, Cosimo changed the
way the zoom animation works so that rather than set the final allocation
and animate, we actually do adjust the allocation of the workspaces view
and thumbnails box.
So, as the hack is no longer necessary, we can drop it.
https://bugzilla.gnome.org/show_bug.cgi?id=694881
Since the agregate menu does 120% of font-size, make this
for all dropdown arrows in gnome-shell and rename the css
class to make clear that it is used in overall gnome-shell
https://bugzilla.gnome.org/show_bug.cgi?id=709564
Until now we had the same svg for hover, active and checked
states in the pagination indicators. Just differentiate between
them using differents svg.
svg files provided by Jakub Steiner
https://bugzilla.gnome.org/show_bug.cgi?id=708852
