It is a bit odd to request AM/PM format when the locale selected
by LC_TIME lacks the concept. We ignore the format setting in that
case elsewhere and assume 24-hour format, let's do the same for
chat timestamps for consistency.
https://bugzilla.gnome.org/show_bug.cgi?id=728271
When workspaces are disabled by the session mode, all workspace
related actions don't make sense. Worse, the "Move to Workspace ..."
actions allow sending windows into a nirvana with no means to
get them back.
https://bugzilla.gnome.org/show_bug.cgi?id=730653
Starting keynav into the active page is handled from a key-press
handler on the stage, however we should not "start" keynav when
we are already navigating elsewhere - the latter can happen when
keynav fails (for instance because the focus is trapped inside an
open app folder or at the end of the dash), and the event bubbles
up to the stage. So make sure to only handle the event to actually
start keynav, to not interfere with the normal navigation handling.
Thanks to Carlos Soriano <carlos.soriano89@gmail.com> for the
debugging footwork.
https://bugzilla.gnome.org/show_bug.cgi?id=726760
The fallback app-menu in GTK+'s client side decorations obviously
uses the GTK+ theme rather than the shell one; update the style
of our own fallback app-menu to resemble that style.
https://bugzilla.gnome.org/show_bug.cgi?id=730752
We now allow "appmenu" in the button layout to make synchronizing it
with GTK+'s client-side decorations easier, but as some people tweak
their settings to get in-window app menus even when using the shell,
actually pop up the app menu when the button is activated.
https://bugzilla.gnome.org/show_bug.cgi?id=730752
The optional label support introduced in commit af063dc2f2 broke
the centering of separators, as the label still adds additional
spacing even when empty.
Properly hide the label actor in that case to fix the alignment.
https://bugzilla.gnome.org/show_bug.cgi?id=730753
When a monitor is removed, the OsdWindow for that monitor may process
the monitors-changed signal before OsdWindowManager does (which will
remove the OSD). If that happens, we will currently try to access
an invalid monitor; check for this to avoid a couple of warning.
When switching between alternatives in AltSwitcher, the currently
visible child is replaced with the alternative. If the original
child has the key focus when it is removed from the stage, the
focus is lost. Detect this case and manually move the focus to
the new child.
https://bugzilla.gnome.org/show_bug.cgi?id=727259
When dragging a window preview from a non-primary monitor onto a
workspace thumbnail, the window is moved to the primery monitor
first before changing its workspace. However when dragging the window
between thumbnails to create a new workspace, it is kept on its current
monitor instead. This is not only inconsistent, but outright confusing
with the default 'workspaces-only-on-primary' setting, as the newly
created workspace is immediately removed again.
https://bugzilla.gnome.org/show_bug.cgi?id=683819
We only need GSystem when running under systemd. As libgsystem itself
has a hard dependency on systemd, only import it when actually needed
to keep working on systems where systemd is not available.
https://bugzilla.gnome.org/show_bug.cgi?id=728449
The workspace switcher should be expanded when workspaces are in use.
Our current implementation assumes that workspaces are used when there
are windows on at least two workspaces. However workspaces are already
used when moving from a non-empty workspace to an empty one (presumably
with the intention to launch something on that workspace), so tweak the
heuristic accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=662457
Having the ability to go to the current date if the user is already
on the current date can be confusing. So don't make the button reactive
until the selected date changes.
https://bugzilla.gnome.org/show_bug.cgi?id=726724
Currently, our logic for page panning isn't great. If the user starts a
pan upwards and hesitates over a new page, we'll go to the *next* page
on release, since the difference is greater, but the velocity wound down
to 0.
Instead of trying to treat it like page down or scrolls, simply do the
math to find the page where the user scrolled to.
This is unfortunately broken for fast swipes, since the user doesn't get
far enough into the new page to make a difference. I'm getting the
impression we'll need a gesture recognizer for this, though, however
crude. Simple hacks I tried, like a velocity multiplier, didn't work
properly.
https://bugzilla.gnome.org/show_bug.cgi?id=729064
We often call goToPage like:
this.goToPage(this._currentPage - 1);
(or + 1). During panning, these are based on the velocity values
of the gesture action. If we're already on the first or last page
and the panning ends, it's possible to get goToPage that's either
-1 or greater than the last page.
During normal usage, this isn't a problem, since the Y values will
be correct, always. But when panning, the Y values stick to the
finger, and thus if we return early, we won't snap to the exact page,
making it seem like things get "stuck".
Fix this the simple way by clamping to the correctly-ranged values
of pageNumber
https://bugzilla.gnome.org/show_bug.cgi?id=729064
The order in which month and year are displayed is controlled by
a "special" translated string in GTK+. We pick up the translation
from there, so make sure that it doesn't get translated again
in gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=715042
When workspaces have been removed, we need to remove the corresponding
thumbnails as well; the number of thumbnails that need removing is
the difference between the old number of workspaces and the new one.
Currently we assume that the old number of workspaces corresponds to
the number of existing thumbnails, but that may actually be wrong:
A thumbnail will still be animated out after its workspace has been
removed. As a result, we end up removing too many thumbnails when a
workspace is removed while a thumbnail of a previously removed workspace
is still animating out. Fix this by basing the old number of workspaces
only on thumbnails that have not been removed previously.
https://bugzilla.gnome.org/show_bug.cgi?id=728820
Taking an area screenshot doesn't work currently when in "grab mode",
for instance when the message tray or top bar menus are open. Fix
this by using GrabHelper for selecting the area, so grabs are properly
stacked for us.
https://bugzilla.gnome.org/show_bug.cgi?id=709126
Commit 7101cc3170 caused a small
regression insomuch that it checks for a valid "level" but simply using
"if (level)" which will be false if level is undefined and if
level == 0.
Check for not undefined instead.
https://bugzilla.gnome.org/show_bug.cgi?id=727384
Sometimes it is more appropriate to set layout properties that are
hooked up to CSS properties in code. However this is currently not
possible, as we end up setting properties to 0 when not found in CSS;
be a bit more careful when hooking up CSS properties to support this.
https://bugzilla.gnome.org/show_bug.cgi?id=728897
When we unregistered providers, like when we refreshed the list of
active remote providers, we would forget to destroy the old provider
display after the fact. This left an empty "skeleton" provider display
still in the search results that would never be filled in. Make sure
to destroy it properly.
https://bugzilla.gnome.org/show_bug.cgi?id=728597
We had one osdWindow that we displayed either on the primary monitor or on
whatever monitor index got passed over dbus.
Change that to show the osd on all monitors when no explicit monitor is
requested. A monitor should be requested in cases like display brightness where it makes sense to only show the osd on the affected monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=722684
NetWM struts are defined in terms of screen edges (rather than monitor
edges), which works poorly with vertical monitor layouts (as it renders
entire monitors unusable). Don't extend struts in those cases.
https://bugzilla.gnome.org/show_bug.cgi?id=663690
Calling Mainloop.source_remove() on the timeout ID will not reset it,
and we're already removing the timeout by returning GLib.SOURCE_REMOVE
in the callback.
If geoclue reports that we can't aquire location, we hide the menu. This
will typically happen when user is offline (and doesn't have a 3G
modem). This is likely not what we want since this like a temporary
situation and user would want the ability to toggle geolocation still
even if its currently not possible any applications to query the
location.
https://bugzilla.gnome.org/show_bug.cgi?id=727398
We need to use a GdkPixbufLoader instead of the straightforward
gdk_pixbuf_new_from_file(), since we want to load the image already
scaled if possible - e.g. if it's an SVG file.
https://bugzilla.gnome.org/show_bug.cgi?id=726907
* 'Turn On' -> 'Enable'
* 'Turn Off' -> 'Disable'
* 'Off' -> 'Disabled'
* 'On' -> 'In Use' or 'Enabled' depending on whether or not service is
in use.
https://bugzilla.gnome.org/show_bug.cgi?id=726498
Telepathy 1.0 will not be compatible, and will probably require
source changes. telepathy-glib 0.12 and telepathy-logger 0.2 are
the 0.x ABIs (they were the first stable-branches to have g-i).
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=721704
Reviewed-by: Giovanni Campagna
In addition to BluetoothAirplaneMode, we need to check also
BluetoothHasAirplaneMode, which is indicative of bluetooth rfkill
devices (and by extension bluetooth adapters).
This prevents showing the menu if there is no adapter present.
https://bugzilla.gnome.org/show_bug.cgi?id=725057
Most system menu entries are disabled on the lock/login screen;
there is no good reason why users should be allowed to turn bluetooth
on/off (but not e.g. Wifi), so disable the entry as well.
https://bugzilla.gnome.org/show_bug.cgi?id=726319
When reacting to background settings changes, we may end up queuing
more than one load. The redundant backgrounds are expected to be
destroyed when the previous background has faded out; however since
commit 933f38390b, the tweened actor is the same for all
consecutive load operations and we end up with a single onComplete
handler, ergo a single destroyed actor.
As new backgrounds are always added to the bottom, we are not only
piling up additional background actors, but break changing backgrounds
more than once, as the correct background ends up being covered by
previously added redundant actors.
Fix this by destroying redundant actors right after loading rather
than waiting for the fade animation to complete.
https://bugzilla.gnome.org/show_bug.cgi?id=726120
Folders use a 2x2 grid of the first 4 app icons as icon - if a folder
contains less apps, we currently skip the corresponding grid positions.
As a result, the overall size request may be smaller than the one for
other icons, making the folder icon look out of place.
Fix this by always using a full grid as folder icon, using dummy actors
as necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=726322
At some point ScreenShield had code to do this, I don't know when
it was lost, but it makes sense and avoids having to move the mouse
just to see the shield.
https://bugzilla.gnome.org/show_bug.cgi?id=726378
With the switch to a table layout in commit f959cafb36, setting
alignments to place the individual icons at the outer edge of the grid
stopped working. Remove that code and add some explicit spacing instead.
https://bugzilla.gnome.org/show_bug.cgi?id=726323
If the notification is updated while SHOWING, we'll overwrite the
tween updating it to the new 'y' position, but forget to update the
state to SHOWN at the end of our transition. Make sure to always set
the state to SHOWN at the end.
https://bugzilla.gnome.org/show_bug.cgi?id=704844
This code may have worked when written in 2009, but later gjs commit
b5e467d89aea43a8e32a1138d232c8a32e6b0785 removed the priority
parameter from idle_add.
Now, when running a constantly-updating client (es2gears) on an
embedded platform, _updateRegions() does not get called and I see
unresponsive window decorations.
Update the code to use meta_later_add() like other parts of the
shell, which is actually slightly better in this case anyway.
Solves the unresponsiveness problem.
https://bugzilla.gnome.org/show_bug.cgi?id=585500
If a user inserts the smartcard they logged in with into the system,
it's supposed to lift the shield and prompt for pin. That doesn't
happen because the parameter list of the smartcard-inserted signal
handler is wrong.
This commit fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=726262
Doing so is inconsistent with the behavior in the summary, and
is quite annoying when dealing with chats (because there is no way
to unfocus a chat notification with the keyboard only)
https://bugzilla.gnome.org/show_bug.cgi?id=724178
We can't let live (ie, never destroyed) actors undergo GC, because
they will emit :destroy signals during finalization and assert/crash
libmozjs. Properly destroy all actors before letting the GC
free them.
https://bugzilla.gnome.org/show_bug.cgi?id=724798
If we have the following sequence:
cache.getImageContent({ filename: "foo", cancellable: cancellable1 });
cache.getImageContent({ filename: "foo", cancellable: cancellable2 });
cancellable1.cancel();
Then the second load will complete with "null" as its content, even though
it was never cancelled, and we'll see a blank image. Meanwhile, since the
second load simply appends to the list of callers for the second load,
cancellable2 does absolutely nothing: cancelling it won't stop the load,
and it will still receive onFinished handling.
To prevent this from happening, give the actual load operation its own
Gio.Cancellable, which is "ref-counted" -- only cancel it when all the other
possible callers cancel.
Based on work from Jasper St. Pierre <jstpierre@macheye.net>
https://bugzilla.gnome.org/show_bug.cgi?id=722149
At the moment when a file is loaded, we iterate through the list of
pending file loads and ignore any unrelated to the file, then iterate
all the callers of the related file loads and finish them.
In fact, there can only ever be one pending file load related to the
file, and we already know it, so we can avoid the ugly nested loops.
https://bugzilla.gnome.org/show_bug.cgi?id=722149
This commit moves the code around a bit such that the
caller gets allocated up front and then a file load is either
found or created to attach the caller to.
Functionally, the code is the same, it's just now factored in a way
that will make it easier to fix a bug with cancellation later.
https://bugzilla.gnome.org/show_bug.cgi?id=722149
Copying is actually a lightweight operation, so trying to avoid it just adds
code complexity for little gain.
Based on work from Jasper St. Pierre <jstpierre@macheye.net>
https://bugzilla.gnome.org/show_bug.cgi?id=722149
Instead of poking through IDLETIME, which confuses the state tracking
and can prevent automatic suspend, send a special signal to GSD
when the screen is to be waken up for a notification.
Someday we'll bring over all the state tracking and avoid this
ping-pong between gnome-shell and gnome-settings-daemon, but
that day's not today.
https://bugzilla.gnome.org/show_bug.cgi?id=712706
NMApplet will call removeConnection() unconditionally on all sections,
including those that had nothing to do with the connection in the first
place.
Fixes:
Gjs-WARNING **: JS ERROR: TypeError: this._connectionItems.get(...) is undefined
NMConnectionSection<.removeConnection@resource:///org/gnome/shell/ui/status/network.js:323
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMApplet<._connectionRemoved@resource:///org/gnome/shell/ui/status/network.js:1885
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
https://bugzilla.gnome.org/show_bug.cgi?id=725958
When the user changes the active day by mouse click or keyboard focus
plus key press on a day in the grid, always move the keyboard focus to
the newly activated day.
This basically restores functionality that was introduced in commit
31478e9fb4 but got lost again in the re-factoring in commit
cc4659f5c6.
https://bugzilla.gnome.org/show_bug.cgi?id=725606
Having to go through import.gi is awfully inconvenient when one
is using the looking glass as a quick gjs console, and we're
already importing all sorts of stuff there.
https://bugzilla.gnome.org/show_bug.cgi?id=725832
Don't forget to rebuild the calendar when changing the setting
'org.gnome.shell.calendar show-weekdate'. This wasn't happening anymore
and changing the setting resulted in a calendar without the days
grid.
https://bugzilla.gnome.org/show_bug.cgi?id=725533
Once you start navigating between months, you can't return to the
current day. However, the current day is always displayed above the
calendar grid. Fix this by making the current date clickable; when
clicked, the calendar grid jumps back to that day.
https://bugzilla.gnome.org/show_bug.cgi?id=641366
The profile name is most often not useful (because it's an
autogenerated string like "Wired Connection 1"), and even when it
is, it's already available in the submenu.
https://bugzilla.gnome.org/show_bug.cgi?id=725586
Commit b7e1539699 removed the size to support hidpi but that caused the
actor to no longer be square. Fix that by going back to setting a size
but apply the scale factor before doing so.
To be able to correctly setup dbus policy, I had to change the expected
agent D-Bus API a bit: Now object path is fixed and not different for
each user.
https://bugzilla.gnome.org/show_bug.cgi?id=725082
Commit 61a58ff3c9 replaced the (removed in commit 254afc50223a7)
MetaWindowActor.get_workspace() method by MetaWindow.get_workspace(),
but did not take into account that the return values differ - the
former returns the workspace index, the latter the workspace object.
https://bugzilla.gnome.org/show_bug.cgi?id=724686
With tile previews being implemented as Clutter actors in the shell, we
can now easily add fancy animations when showing/hiding the preview.
Besides looking more polished, the animations also help understanding
what will happen to the window when the drag is finished.
https://bugzilla.gnome.org/show_bug.cgi?id=665758
Interrupting update installation can mess up the package database quite
a bit and could lead to totally destroying the distro installtion. To
avoid running out of juice during an upgrade, warn when someone tries to
install updates on battery power.
https://bugzilla.gnome.org/show_bug.cgi?id=722898
This adds a checkbox for installing software updates to the shut down
dialog. The implementation relies on an already prepared offline update
and uses PackageKit's pk-trigger-offline-update helper to trigger the
installation.
https://bugzilla.gnome.org/show_bug.cgi?id=722898
This moves the dialog type overriding that gnome-software uses to bring
up restartInstallDialogContent from _sync() to OpenAsync(), in order to
ensure the type is overridden early enough to show the correct buttons.
While at this, make sure the & symbol in the button's label is escaped
to avoid runtime warnings, now that the label actually gets used.
https://bugzilla.gnome.org/show_bug.cgi?id=722898
Currently workspaces (except for the last one) are removed when
they become empty. While we do have special treatment for the
case where the currently active workspace is removed, we just
move directly without animations to the last workspace to avoid
ending up on a "random" workspace. However this behavior is still
a bit confusing, so keep the workspace around instead until the
user decides to move to another one.
https://bugzilla.gnome.org/show_bug.cgi?id=709064
Add a key 'disable-extension-version-validation' key that disables
the validation of extension's claimed to be supported shell version
with the shell version and just load all extensions unconditionally.
https://bugzilla.gnome.org/show_bug.cgi?id=724683
