Since commit 784c0b7e4 we use the name of the nearest city rather
than the weather station, as the latter tend to have unwieldy
and weird names.
However the nearest city may not be that near after all, in which
case the result is again surprising.
Address this by not using the nearest city name unconditionally, but
only if it appears in the station name.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2468
AuthPrompt is created on demand, and this._authPrompt is
expected to be null except on very strictly controlled
occasions. The idle monitor callback isn't one of them.
Check if AuthPrompt exists before cancelling it.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2371
We finally have everything in place for distributing the Extensions app
as flatpak without jumping through too many hoops. Add a manifest that
can produce a nightly build like other GNOME modules, and can serve as
a template for a stable manifest on flathub.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1133
The Extensions app code is now independent enough from the rest of the code
base to move it to its own subprojects, like we did for the extensions-tool.
This allows for stand-alone builds of the app, which we are about to use
for distributing it as flatpak.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1133
We include config.js because it is a dependency of ExtensionUtils,
but it's not actually used in the code paths we exercise.
As we want to allow stand-alone builds of the app, it is much easier to
fake the module than to either include a generated file from elsewhere
in the tree or generate it ourselves.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1133
Instead of adding a dragMonitor for every icon in the grid as soon as
one icon is getting dragged, only add a dragMonitor for the icon that is
currently being dragged over (ie. the current drag-target). With a large
number of icons in the iconGrid, this should significantly reduce lags
while dragging.
We can do this by detecting the DnD-entering of an icon or folder using
the `handleDragOver()` callback of drag-targets, adding the dragMonitor
because we know an icon is hovering above the drag-target and then
detecting the DnD-leaving of the drag-target by using the `dragMotion()`
handler, where we remove the dragMonitor again as soon as the
targetActor is no longer our actor (ie. the drag-target).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/849
While it should be impossible to destroy a FolderIcon while a DnD action
is still going on, there might still be rare cases where this happens
(ie. when a folder is removed because an app got deleted during DnD).
So make sure we're on the safe side here and don't potentially leave
dragMonitors around after the icon is destroyed by removing the
dragMonitor inside the onDestroy handler of the FolderIcon, just like we
do for AppIcons.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/849
We want to completely clear the background framebuffer when switching
back to ACTOR mode to make sure the `background_fb.framebuffer` check
will fail in `update_background_fbo` when switching to BACKGROUND mode
again. Otherwise the checks in `update_background_fbo` will return TRUE
and we will keep using the background framebuffer that was created
before switchig to ACTOR mode.
While at it, also clear the background framebuffer completely when
changing the actor to avoid the same issue here.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1000
When blurring only the actor (ACTOR mode), we don't want to apply any
scale, it looks fine without using the resource scale and it also seems
like `clutter_actor_continue_paint` in `paint_actor_offscreen` only
draws an unscaled texture anyway (ie. if the resource scale is 2, only a
quarter of the framebuffer is being drawn to).
In BACKGROUND mode though, we need to scale the framebuffer using the
scale factor of the stage view (ie. the final scale factor for the
monitor) because the content of the framebuffer we blit is scaled using
that factor. Also, since the framebuffer we blit belongs to a stage view
and only includes the contents of this view, we need to adjust the
stage-coordinates of the actor to be relative to the stage-view.
To make sure we don't have to get the transformed actor size or position
multiple times during one paint-run and don't have to carefully floor()
or ceil() widths and positions, store the size of the actor (which is
also the size of the framebuffer) and its position relative to the stage
view inside a ClutterActorBox.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1000
A ClutterEffect is being painted as part of the paint cycle of
ClutterActor, where _clutter_effect_paint() is called before painting
the actual actor. With that, it's impossible that an effect gets painted
while it's disabled, so remove the check whether the ClutterActorMeta is
enabled before painting.
Also if everything works fine in Clutter, the ClutterActorMeta should
have an actor set and we've been notified about that actor in
shell_blur_effect_set_actor(), so assert that our cached actor is set
when painting the effect.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1000
Forward the arguments at the 'delete-surrounding-text' signal
from IBusInputContext to clutter_input_method_delete_surrounding()
so that ibus-typing-booster use the deleting surrounding text function.
Input method engines can delete the output text in applications
with this function.
This change will require a change of mutter of mutter!517
because the first arguemnt of the 'delete-surrounding-text' is INT
to express the offset of the current cursor position but
the first one of clutter_input_method_delete_surrounding() is UINT
since the Wayland spec accepts UINT in delete_surrounding()
mutter will change the type of the first one to INT in
clutter_input_method_delete_surrounding() to work with this change.
https://gitlab.gnome.org/GNOME/mutter/issues/539https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/477
We had various requests to improve existing OSK layouts, but
haven't accepted them so far as any changes would be overridden
when regenerating the layouts.
However as the upstream layouts at http://www.unicode.org are
extremely slow to update(*), we shouldn't block all improvements.
So instead of letting the update script override all existing
layouts, just make it import new layouts.
(*) not their fault, as the android layouts are a downstream to Google
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1136
The module was imported into the toplevel in !424, but that's at
least a bit weird:
- it's a helper script for one particular aspect (OSK layouts)
- it adds a README.mdwn to our own README.md, and a test/ directory
to our tests/
Move the whole thing to a subdirectory under data/, which is more
appropriate.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1136
Use a brighter color and increase the contrast of the selected/active
items in the switcher popup.
Since a bright color doesn't go well with a box-shadow, remove that
shadow, an effect like should only be used for elements clicked with a
mouse anyway.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1135
While we don't technically need the app to download and apply
updates, we do require it for notifying the user about available
updates and listing extensions with pending updates.
So instead of intransparently applying updates in the background
without the user noticing, disable updates altogether if the
Extensions app is not installed.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2346
Blacklist support was added all the way back in commit 1e286e43, but
the code had been defunctional until recently. While uninstalling an
extension that has been blacklisted makes sense off-hand, unfortunately
we don't know if an extension was *actually* blacklisted:
The website returns that operation for any extensions for which it
doesn't find any versions that match the shell version. That is, the
most likely reason is that the user updated to a new GNOME release
which the extension doesn't support yet.
It doesn't look like the website is going to change that behavior any
time soon[0], so drop the 'blacklist' handling for the time being.
[0] https://gitlab.gnome.org/Infrastructure/extensions-web/-/issues/95https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1132
Commit 55b57421d changed signal handlers to the corresponding vfuncs,
but didn't always chain up as necessary. In most places this doesn't
matter, but at the very least the commit broke activating message list
items via the keyboard.
Add all (hopefully) the missing chain-ups to get the expected behavior
back.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2319
Destroying the policy invalidates it, so accessing it from a
Source::destroy handler (for example to disconnect signal
handlers) currently results in warnings like:
Object .Gjs_ui_messageTray_NotificationApplicationPolicy
(0x7f8c7c0a64a0), has been already deallocated — impossible
to access it.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2238
The idea behind commit 3dd8ffc2bb to try harder to avoid empty
icon actors because of missing icons was sound, so implement that
behavior in StIcon itself:
If the main gicon was not found, and the fallback gicon isn't set or
wasn't found either, fall back to the standard 'missing-image' icon.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1127
The commit broke StIcon's :fallback-gicon property, as it relies on failure to load
an icon to determine that the fallback should be shown.
Luckily StIcon is the only user of st_texture_cache_load_gicon() (at least in
regular shell code), so we'll be able to implement the 'image-missing' fallback
there.
This reverts commit 3dd8ffc2bb.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1127
In order to support OpenExtensionPrefs()'s parentWindow parameter,
we will need the ability to make a window transient to an external
window identified by a string handle.
This takes the corresponding code from xdg-desktop-portal-gtk and
brings it into an introspectable form, likewise the counterpart in
libportal to export a string handle for a GtkWindow.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1087
Since PackageKit 1.11.1, the prompt to install updates on the end
session dialog has been (mostly) broken. The problem is that it only
works if PackageKit is running at the time the end session dialog is
opened; otherwise, our GDBusProxy has invalidated all of its properties,
which we read to see if update is possible. We need to autostart
PackageKit before reading its properties to fix this problem. That would
be easy if we were calling a method to see if an update or distro
upgrade were available, but since we're just checking a property, using
cached properties won't suffice. We'll have to manually check the
property value to ensure we autostart PackageKit.
Most of the code is written by Florian. Thanks Florian!
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/2276
Previously we'd show the system background and then wait till the
main loop was idle before beginning the shell startup animation.
This resulted in one initial frame that was always just the system
background.
Now we try to get both the system background and the startup animation
begun on the same first frame.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1102
In telepathyClient we consider messages both Tpl.TextEvents and
Tpl.Messages, and we manually create JS objects to copy the properties we
care for each one. This may lead to objects not matching the interface we
want.
Instead, use an object with construct-only properties and two factory static
methods to initialize it.
Unfortunately we need to use the ChatMessageClass for the class name or
calling the static methods would trigger a gjs error as per [1].
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1113
[1] https://gitlab.gnome.org/GNOME/gjs/-/issues/310
When mutter is acting as a display server it sets a number of
environment variables in the user's session. These variables
tell applications where the display server's sockets are.
When the shell exits at logout time it leaves these environment
variables in the systemd --user environment, which can confuse
subsequent sessions.
This commit clears up the environment on exit.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1129
We now warn on startup if screen locking isn't available, however for
users who choose not to use GDM or logind, repeating the warning on
each login is more annoying than helpful.
Instead, limit the warning to the first login on which the screen lock
became unavailable. That way the notification will still serve the
intended purpose of informing the user, but without being perceived
as nagging.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2432
Add a small helper method to asynchronously "touch" a file and return
whether the file was created or not.
As g_file_make_directory_with_parents() doesn't have an async variant,
we need a C helper to make the entire operation non-blocking.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2432
It's easy to forget to add a new <release> tag to the metainfo when
doing a new release.
Address this with an additional test if appstream-util is recent
enough to include the new validate-version command, so distcheck
fails when the metainfo wasn't updated.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1117
Rely on the Pango renderer handling this properly, instead of tinting
the full ClutterText in the color specified through css.
Also set the caret color explicitly, since it used to be set as a side
effect of clutter_text_set_color(), but no longer is.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/850
Commit da537cda43 moved the Shell.Screenshot API to GIO's async pattern,
but we never set the GError passed to the *_finish() functions and only
indicate failure by returning FALSE.
The expected behavior is to throw an error in that situation, so make sure
we do that.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1123
