The 0x0 dummyCursor works well when the menu pops up directly underneath
the pointer (e.g. when triggered by right-clicking the titlebar) or by
keyboard, but not when triggered by the menu button - the menu does not
point to the center of the button's bottom edge, and unless the user
keeps holding the mouse button while moving into the menu, the menu will
be dismissed immediately on button release.
Address these issues by using the button geometry to overlay the window
button with an appropriately sized actor that acts as a proper sourceActor,
to make the window menu behavior consistent with other shell menus.
https://bugzilla.gnome.org/show_bug.cgi?id=731058
Having the full geometry of the menu's source button (if any) will
allow us to address several misbehaviors of window menus, so use
that instead of show_menu().
https://bugzilla.gnome.org/show_bug.cgi?id=731058
When the pointer leaves the notification area, we queue a timeout to
hide the notification after a little while. If the user is hovering over
a notification and clicks the X button to close the notification, we will
destroy the notification, which causes a "pointer left" event on the
notification area. This queues a timeout which erroneously fires after
the next notification in the queue shows up.
The code and state machine are too complex to properly make sure this
timeout doesn't fire when there is no notification up next, so instead
just clear it when showing a notification to make sure that any
previously queued timeout doesn't apply to us.
https://bugzilla.gnome.org/show_bug.cgi?id=731118
We don't make use of any functionality StTable provides over
ClutterTableLayout, so port all users to the Clutter layout
in order to remove our own copy of the code.
https://bugzilla.gnome.org/show_bug.cgi?id=703833
We don't make use of any functionality StTable provides over
ClutterTableLayout, so port all users to the Clutter layout
in order to remove our own copy of the code.
https://bugzilla.gnome.org/show_bug.cgi?id=703833
It is a bit odd to request AM/PM format when the locale selected
by LC_TIME lacks the concept. We ignore the format setting in that
case elsewhere and assume 24-hour format, let's do the same for
chat timestamps for consistency.
https://bugzilla.gnome.org/show_bug.cgi?id=728271
When workspaces are disabled by the session mode, all workspace
related actions don't make sense. Worse, the "Move to Workspace ..."
actions allow sending windows into a nirvana with no means to
get them back.
https://bugzilla.gnome.org/show_bug.cgi?id=730653
Starting keynav into the active page is handled from a key-press
handler on the stage, however we should not "start" keynav when
we are already navigating elsewhere - the latter can happen when
keynav fails (for instance because the focus is trapped inside an
open app folder or at the end of the dash), and the event bubbles
up to the stage. So make sure to only handle the event to actually
start keynav, to not interfere with the normal navigation handling.
Thanks to Carlos Soriano <carlos.soriano89@gmail.com> for the
debugging footwork.
https://bugzilla.gnome.org/show_bug.cgi?id=726760
The fallback app-menu in GTK+'s client side decorations obviously
uses the GTK+ theme rather than the shell one; update the style
of our own fallback app-menu to resemble that style.
https://bugzilla.gnome.org/show_bug.cgi?id=730752
We now allow "appmenu" in the button layout to make synchronizing it
with GTK+'s client-side decorations easier, but as some people tweak
their settings to get in-window app menus even when using the shell,
actually pop up the app menu when the button is activated.
https://bugzilla.gnome.org/show_bug.cgi?id=730752
The optional label support introduced in commit af063dc2f2 broke
the centering of separators, as the label still adds additional
spacing even when empty.
Properly hide the label actor in that case to fix the alignment.
https://bugzilla.gnome.org/show_bug.cgi?id=730753
When a monitor is removed, the OsdWindow for that monitor may process
the monitors-changed signal before OsdWindowManager does (which will
remove the OSD). If that happens, we will currently try to access
an invalid monitor; check for this to avoid a couple of warning.
When switching between alternatives in AltSwitcher, the currently
visible child is replaced with the alternative. If the original
child has the key focus when it is removed from the stage, the
focus is lost. Detect this case and manually move the focus to
the new child.
https://bugzilla.gnome.org/show_bug.cgi?id=727259
When dragging a window preview from a non-primary monitor onto a
workspace thumbnail, the window is moved to the primery monitor
first before changing its workspace. However when dragging the window
between thumbnails to create a new workspace, it is kept on its current
monitor instead. This is not only inconsistent, but outright confusing
with the default 'workspaces-only-on-primary' setting, as the newly
created workspace is immediately removed again.
https://bugzilla.gnome.org/show_bug.cgi?id=683819
We only need GSystem when running under systemd. As libgsystem itself
has a hard dependency on systemd, only import it when actually needed
to keep working on systems where systemd is not available.
https://bugzilla.gnome.org/show_bug.cgi?id=728449
The workspace switcher should be expanded when workspaces are in use.
Our current implementation assumes that workspaces are used when there
are windows on at least two workspaces. However workspaces are already
used when moving from a non-empty workspace to an empty one (presumably
with the intention to launch something on that workspace), so tweak the
heuristic accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=662457
Having the ability to go to the current date if the user is already
on the current date can be confusing. So don't make the button reactive
until the selected date changes.
https://bugzilla.gnome.org/show_bug.cgi?id=726724
Currently, our logic for page panning isn't great. If the user starts a
pan upwards and hesitates over a new page, we'll go to the *next* page
on release, since the difference is greater, but the velocity wound down
to 0.
Instead of trying to treat it like page down or scrolls, simply do the
math to find the page where the user scrolled to.
This is unfortunately broken for fast swipes, since the user doesn't get
far enough into the new page to make a difference. I'm getting the
impression we'll need a gesture recognizer for this, though, however
crude. Simple hacks I tried, like a velocity multiplier, didn't work
properly.
https://bugzilla.gnome.org/show_bug.cgi?id=729064
We often call goToPage like:
this.goToPage(this._currentPage - 1);
(or + 1). During panning, these are based on the velocity values
of the gesture action. If we're already on the first or last page
and the panning ends, it's possible to get goToPage that's either
-1 or greater than the last page.
During normal usage, this isn't a problem, since the Y values will
be correct, always. But when panning, the Y values stick to the
finger, and thus if we return early, we won't snap to the exact page,
making it seem like things get "stuck".
Fix this the simple way by clamping to the correctly-ranged values
of pageNumber
https://bugzilla.gnome.org/show_bug.cgi?id=729064
The order in which month and year are displayed is controlled by
a "special" translated string in GTK+. We pick up the translation
from there, so make sure that it doesn't get translated again
in gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=715042
When workspaces have been removed, we need to remove the corresponding
thumbnails as well; the number of thumbnails that need removing is
the difference between the old number of workspaces and the new one.
Currently we assume that the old number of workspaces corresponds to
the number of existing thumbnails, but that may actually be wrong:
A thumbnail will still be animated out after its workspace has been
removed. As a result, we end up removing too many thumbnails when a
workspace is removed while a thumbnail of a previously removed workspace
is still animating out. Fix this by basing the old number of workspaces
only on thumbnails that have not been removed previously.
https://bugzilla.gnome.org/show_bug.cgi?id=728820
Taking an area screenshot doesn't work currently when in "grab mode",
for instance when the message tray or top bar menus are open. Fix
this by using GrabHelper for selecting the area, so grabs are properly
stacked for us.
https://bugzilla.gnome.org/show_bug.cgi?id=709126
Commit 7101cc3170 caused a small
regression insomuch that it checks for a valid "level" but simply using
"if (level)" which will be false if level is undefined and if
level == 0.
Check for not undefined instead.
https://bugzilla.gnome.org/show_bug.cgi?id=727384
Sometimes it is more appropriate to set layout properties that are
hooked up to CSS properties in code. However this is currently not
possible, as we end up setting properties to 0 when not found in CSS;
be a bit more careful when hooking up CSS properties to support this.
https://bugzilla.gnome.org/show_bug.cgi?id=728897
When we unregistered providers, like when we refreshed the list of
active remote providers, we would forget to destroy the old provider
display after the fact. This left an empty "skeleton" provider display
still in the search results that would never be filled in. Make sure
to destroy it properly.
https://bugzilla.gnome.org/show_bug.cgi?id=728597
We had one osdWindow that we displayed either on the primary monitor or on
whatever monitor index got passed over dbus.
Change that to show the osd on all monitors when no explicit monitor is
requested. A monitor should be requested in cases like display brightness where it makes sense to only show the osd on the affected monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=722684
NetWM struts are defined in terms of screen edges (rather than monitor
edges), which works poorly with vertical monitor layouts (as it renders
entire monitors unusable). Don't extend struts in those cases.
https://bugzilla.gnome.org/show_bug.cgi?id=663690
