This is a ClutterInputMethod implementation using IBus underneath. The
input method will interact with the currently focused ClutterInputFocus,
be it shell chrome or wayland clients through the text_input protocol.
It turns out that NetworkManager does export the directory as pkg-config
variable after all, so use that instead of building the path ourselves
from the prefix.
https://bugzilla.gnome.org/show_bug.cgi?id=789811
Every action has specific associated terms that
identify that action and show it in the search
results. Methods to match the actions as well
as getting properties of specific actions are
needed in order to provide a way of using the
actions.
https://bugzilla.gnome.org/show_bug.cgi?id=691900
We want to be able to search for available system actions, so
rather than tracking each action in a separate property, store
them in a single map that can be searched in a generic and clean
way.
https://bugzilla.gnome.org/show_bug.cgi?id=691900
In anticipation of showing the system actions in
the search results, it is fit to move action
specific code to its own module in order to
reuse it.
https://bugzilla.gnome.org/show_bug.cgi?id=691900
Meson is on track to replace autotools as the build system of choice,
so support it in addition to autotools. If all goes well, we'll
eventually be able to drop the latter ...
https://bugzilla.gnome.org/show_bug.cgi?id=783229
Any symbols (including class properties) that should be visible
outside the module it's defined in need to be defined as global.
For now gjs still allows the access for 'const', but get rid of
the warnings spill now by changing it.
https://bugzilla.gnome.org/show_bug.cgi?id=785084
Commit 39a840e2c3 added an additional parameter to shell_app_launch().
When adjusting callers, the parameter was also added accidentally to
calls of the confusingly similar g_app_info_launch() ...
Remove those to fix some warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
Don't try to access a non-existent engine - it probably makes sense to
use Map() instead of a plain object to track engines in the future, but
for now just add an additional check to shut up a warning.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
We only use lastItem() to reset the history index to the end, so
nobody noticed the utter nonsense in the return value until gjs
started to warn about it. As we don't actually use the value
anywhere, we could just remove it, but the function name implies
that an item is returned, so fix it to behave as advertised.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
While the string returned by formatTime() should follow the locale's
text direction as a whole, the actual time part is always expected
to put hours on the left and minutes to the right. It is possible to
enforce that by inserting a left-to-right mark, but so far this is
only done by the Hebrew translation. So in order to not require all
other RTL translations to be fixed individually, just insert the
mark into the returned string ourselves like gnome-desktop's WallClock
code does[0].
[0] https://git.gnome.org/browse/gnome-desktop/tree/libgnome-desktop/gnome-wall-clock.c?h=gnome-3-24#n267https://bugzilla.gnome.org/show_bug.cgi?id=784130
Ever since commit b8e29ae8c7
(I think), start up is littered with this message:
Gjs-WARNING **: JS ERROR: could not get remote objects for service
org.gnome.SettingsDaemon.Smartcard path
since gnome-shell is now started before gnome-settings-daemon.
This commit addresses the problem by making the object manager code
not try to autostart its proxy, and instead wait for it to appear.
https://bugzilla.gnome.org/show_bug.cgi?id=772589
So far, the GWeatherInfo was given the enabled weather providers
as a parameter, at construction time. Because of the way in
which libgweather was designed, setting the providers right from
the beginning enabled libgweather to use them internally in order
to update its state. Updating the internal state is only relevant
when there is a valid location set, which is not guaranteed at the
time when the GWeatherInfo object is constructed.
In order to fix this, enable no providers at construction time and
only set valid providers after setting a valid location.
https://bugzilla.gnome.org/show_bug.cgi?id=780404
Our weather integration should follow GNOME Weather as closely as
possible, which means that we should respect its location permission
rather than using our own or none at all (which we can as a "system"
component and as geoclue's authorization agent).
https://bugzilla.gnome.org/show_bug.cgi?id=780252
It doesn't make sense to tie the proxy code for flatpak's permission
store to the location indicator, just because that was the first
component to use it, so split it into a separate module.
https://bugzilla.gnome.org/show_bug.cgi?id=780252
The setting to globally disable location settings altogether isn't
handled by the geoclue service itself, but by the authorization
agent. This means that:
- it doesn't apply to system components
(which gnome-shell is now considered[0])
- it doesn't apply once the geoclue connection
has been authorized
However users can reasonably expect that we won't use location services
after they disabled them, so handle the setting explicitly.
[0] https://cgit.freedesktop.org/geoclue/commit/?id=a4cef6c0ad08https://bugzilla.gnome.org/show_bug.cgi?id=780252
We currently use automatic location for weather forecasts if the
corresponding Weather setting is set, however we should take other
factors into account as well:
- whether location services are enabled at all
- whether Weather has been authorized to use them
In preparation of these changes, track the setting's value in a
separate property and make _useAutoLocation a getter, so we can
extend it with additional conditions easily.
https://bugzilla.gnome.org/show_bug.cgi?id=780252
Setting GWeatherInfo:location to null helpfully doesn't mean
"no location", but "NYC". This obviously isn't what we want
to show users, so track the location validity separately and
consider it when updating the label shown to users.
https://bugzilla.gnome.org/show_bug.cgi?id=780252
If GeoClue is not responding for some reason, the callback of
Geoclue.Simple.new would not get called, meaning that _gclueFailed
remains false. This is preventing the fallback to the most recently
used location in gnome-weather, because it requires _gclueFailed to be
true (or auto-location to be disabled). So neither code path sets a
location and the libgweather default (New York City) is being used
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=779898
For notifications in the message list, it is usually less relevant
when exactly it occurred, but how long ago. So rather than showing
the exact time and expecting the user to figuring out the timespan
themselves, change the format to something human readable.
https://bugzilla.gnome.org/show_bug.cgi?id=775763
Weather conditions - at least as far as online services are
concerned - don't usually change in a couple of minutes.
So when updating shortly after a previous update, assume
the current conditions are still valid and trigger an
update without showing a loading indication. This should
help a bit with not getting stuck permanently in loading
state when on a shitty network.
https://bugzilla.gnome.org/show_bug.cgi?id=754031
In preparation of integrating GNOME Weather, add a helper class that
retrieves weather information according to Weather's configuration
if the application is installed.
https://bugzilla.gnome.org/show_bug.cgi?id=754031
When integrating with optional components like Clocks, it is not safe
to access their GSettings right after the application became visible
to the AppSystem:
Installation is usually not atomic, so the .desktop file may appear
before the settings schema, in which case Gio will abort due to an
"invalid" schema ID.
To address this, add a small helper class that wraps the settings
access in a safe way.
https://bugzilla.gnome.org/show_bug.cgi?id=766410
Mutter now provides versioned libraries and pkg-config files, meaning
an application using libmutter and friends need to depend on a specific
version of the API.
https://bugzilla.gnome.org/show_bug.cgi?id=777317
The following code is a syntax error in ES6:
let a = 'something';
let a = 'other thing';
Previously GJS would silently accept this code, but in the next release the
SpiderMonkey JS engine will be more ES6-compliant.
https://bugzilla.gnome.org/show_bug.cgi?id=778425
Per ES6, a variable declared const should only be valid inside its lexical
scope. Previously, GJS would accept this code, but that will change in the
SpiderMonkey JS engine in the next release of GJS.
https://bugzilla.gnome.org/show_bug.cgi?id=778425
Ever since commit b8e29ae8c7
(I think), start up is littered with this message:
Gjs-WARNING **: JS ERROR: could not get remote objects for service
org.gnome.SettingsDaemon.Smartcard path
since gnome-shell is now started before gnome-settings-daemon.
This commit addresses the problem by making the object manager code
not try to autostart its proxy, and instead wait for it to appear.
https://bugzilla.gnome.org/show_bug.cgi?id=772589
And adapt existing callers to the new API. This will allow us to
implement a way to launch applications on the discrete GPU for systems
where an "Optimus" system exists.
https://bugzilla.gnome.org/show_bug.cgi?id=773117
Apparently importers for the 'same' path are shared, even when the
relative paths resolve to different absolute ones. Until this bug
is fixed properly, we can work around this by expressing the current
extension path as the UUID relative to the parent directory.
https://bugzilla.gnome.org/show_bug.cgi?id=772386
You can define a new importer object by importing a subdirectory in GJS.
This is undocumented, but it is likely to at least hold until the whole
thing moves to ES6 modules, after which we'll be able to do this purely
in JS with Reflect.Loader.
Since this was the only thing the ShellJS library did, we can remove it
altogether.
This allows us to discontinue use of the gjs-internals-1.0 embedder API.
https://bugzilla.gnome.org/show_bug.cgi?id=772386
Currently it's assumed only an extension can call this method. However
it can be useful if any part of the shell want to know if it was invoked
by an extension.
https://bugzilla.gnome.org/show_bug.cgi?id=770717
The underlying logind API does not only indicate whether suspend is
available, but also whether the user is eligible for executing the
operation without further authentication. This information can be
relevant, so pass it to the callback.
https://bugzilla.gnome.org/show_bug.cgi?id=725960
Logind recently got support for a hint property in Session Object to
inform if session is Locked or not. It is up to desktop environments
to keep this property up to date.
https://bugzilla.gnome.org/show_bug.cgi?id=764773
According to systemd logind's documentation, the CanSuspend() method
"returns 'na' in case "the operation is not available because hardware,
kernel or drivers do not support it", while "'no' is returned if the
operation is available but the user is not allowed to execute it".
See http://www.freedesktop.org/wiki/Software/systemd/logind
Thus, we need to return true here when the reply for the CanSuspend
method is neither 'no' nor 'na', or we would providing false positives
in cases where suspension is simply unsupported.
https://bugzilla.gnome.org/show_bug.cgi?id=748338
On locales that support it, time formats should follow the 12-hour/24-hour
preference, which implies that they should be updated when the setting
changes. So add another utility method which creates a label for a specific
time and keeps it in sync with the format setting.
https://bugzilla.gnome.org/show_bug.cgi?id=745111
The world clock uses GLib.DateTime instead of the built-in Date type
because of the much superior timezone support, and therefore cannot
use the new formatTime() helper. To make this possible, modify the
method to support a parameter of either type.
https://bugzilla.gnome.org/show_bug.cgi?id=745111
Displaying a time is more complex than it appears at first glance:
it should respect the user's choice regarding 12- our 24-hour format (but
only when supported by the locale) and follow the LC_TIME rather than the
LC_MESSAGES setting.
So rather than getting it more or less right in various places, it makes
sense to defer to a helper method which hopefully does the right thing. The
method added by this patch is based on _formatTimestamp in telepathyClient
with some minor tweaks:
- there's an additional params parameter which allows enforcing
a time-only format, even on dates other than the current one
- only a single desktop settings object is created and shared between
invocations
https://bugzilla.gnome.org/show_bug.cgi?id=745111
Input method preedit text needs to be disabled on password entries
for security and usability reasons.
IBus 1.5.7 provides the signal set-content-type so that panel UIs can
handle these special purpose input entries:
https://github.com/ibus/ibus/commit/6ca5ddb302c9
Unfortunately IBus versions older than 1.5.10 have a bug which causes
spurious set-content-type emissions when switching input focus that
temporarily lose purpose and hints defeating its intended semantics
and confusing users. We thus don't use it in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=730628
Normally users switch xkb input sources and ibus input sources.
But currently the first input source only is running. It's also good
to preload all ibus engines in the logging session so that users switch
input sources quickly without the launching time of input sources.
The following is the ibus change:
https://github.com/ibus/ibus/commit/cff35929a9https://bugzilla.gnome.org/show_bug.cgi?id=695428
